crankbrothers Mallet E LS PedalsDesigned for enduro riding, the Mallet E LS Pedals from crankbrothers will give you the extra edge. Featuring longer spindles for enhanced control and optimised clearance, they're equipped with 6 adjustable pins per side, traction pads, and a ribbed body, guaranteeing a slip-free and stable platform. They feature a four-sided easy engagement system, so you can just stamp down and go and also benefit from sealed cartridge bearings for excellent durability that's ready for whatever challenge you meet on the trail.PerformanceThe concave pedal platform offers a more secure foothold. Like it's DH equivalent you get that flat pedal feel whilst running clipless. 49g lighter and 12% smaller pedal body than the crankbrothers Mallet DH pedal with a 52mm Q-Factor compared to 57mm on the DH equivalent. Ribbed body allows for better traction when unclipped whilst chamfered edges allow a reduction in rock strikes. The open design also provides excellent mud shedding. 4-sided entry: clip in on all 4 sides of the pedal, by pushing forward or pulling backwards on the pedal.FitIncreased float: 6° of side-to-side rotational play. The float of the pedal allows for the rider to shift positions on the bike, while keeping their feet clipped into the pedal. This allows for improved rider control and bike handling. Fit adjustment: crankbrothers premium cleats can be adjusted for either 15° or 20° release angle. Zero-float cleats can be purchased separately. Customise the fit between your shoe/pedal interface by using integrated traction pads. The pedals come with the 1mm tread pads fitted and include set of 2mm pads in the box.DurabilityOuter enduro cartridge bearing is designed specifically for pedals. Enduro use superior materials, grease and sealing on their bearings which are designed especially for use on a bike. Inner igus LL-glide bearing has been exclusively formulated for crankbrothers. It performs in even the most adverse conditions out on the trails. The double seal system combines a double lip internal seal and a new external seal to keep water and debris from entering the pedal.MaintenanceCrankbrothers pedals are fully re-buildable for simple maintenance. There is a consistency in parts across all pedal models, which allows for ease of servicing, this is easily done using the pedal refresh kit.Features: 6 adjustable pins per side for grip 4-sided entry Superior mud-shedding capabilities Chamfered edges to reduce rock-strikes Premium bearings and double seal system Cleat Type: Premium brass cleats with shimsCleat Included: YesBody Material: 6061-T6 Aluminium/Composite Spindle Material: Scandium 435 Chromoly (CrMo) Wing Material: 17-4PH Stainless Steel Inner bearing type: Igus LL-glide bearing Outer bearing type: Enduro cartridge bearing Release angle: 15°/20° (customisable)Q-Factor: 57mm Weight: 424g per pairBuy crankbrothers Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The GLENDALE achieves the perfect balance of timeless styling melded with premium frame and lens technology that distinguished riders expect. In the box you'll find a low-light lens and a vintage style hard case holds glasses and spare lenses as well as a microfiber cleaning bag and an extra alternative fit nose pad Signature cylindrical shield lens with extra large field of vision High-impact resistant and lightweight polycarbonate lenses 100% UV protection (UV400) Scratch resistant lens coating of the highest quality Additional lens ventilation to prevent fogging HYDROILO lens treatment repels water dirt and oil Shatterproof lightweight Grilamid TR90 frame Ultra-grip rubber nose pads and temple tips for a secure fit no matter how much you sweat Adjustable temple tips for the optimal fit and maximum comfort HiPER lens options available
Crankbrothers Mallet Boa MTB Clipless Cycling ShoesClip-in and go shred, the Crankbrothers Mallet Boa MTB Clipless Cycling Shoes come fitted with a Crankbrothers pedal cleat so you can be enjoying the comfort and performance of these trail-slayers in no time. Packed with features to make your mountain biking more comfortable and more assured, the Mallet Boa MTB Clipless Cycling Shoes benefit from the same attention to detail that Crankbrothers apply to their pedals. The innovative Match System optimizes cleat engagement for any MTB clip-in system, keeping you confidently in control when flying over technical terrain.The sleek and stylish upper design uses premium materials, delivering a snug comfortable fit as well as excellent trail-ready durability. Perforations and mesh windows offer excellent breathability to avoid sweat build-up inside and ensure you enjoy fresh feet throughout your ride. A reinforced toe box protects against impacts while TPU reinforcements add abrasion resistance in vulnerable areas. A padded tongue also adds an extra layer of comfort and protection. Twist and Go. Making adjustment super-quick and super-easy, the BOA® Fit System lets you dial in the fit of your shoes just right every time. A simple twist of the dial offers micrometric adjustment, so your shoes are never too tight and never too loose. Plus it's easy to adjust on-the-fly and it's light too. Match Box MTB Pedal SystemCrank Brothers have carefully engineered their innovative Match Box cleat box to ensure you enjoy quick and easy clipping in, no matter which clip-in MTB pedal system you prefer.Ramped zones to the front and rear of the cleat box make for a quick and easy cleat engagement and add extra mud clearance for all-weather performance. An extended cleat track, the 'race zone', lets you get just the right cleat position for bike control and pedal stability too. And with its stiff shank, you'll enjoy excellent power transfer on the more pedal-heavy bits of trail. Meanwhile, when you're off the bike and walking up to session a trail feature, the toe and heel lugs provide traction on loose and muddy surfaces and the toe is ramped for improved walkability too. Cleat GuidanceThese MTB shoes are compatible with MTB pedal systems, which use cleats with SPD standard (2-bolt standard). They come supplied with pre-installed Crankbrothers Match Shim and a pre-installed cleat for Crankbrothers pedals but are compatible with other systems e.g.: Shimano SPD, Time ATAC, Look MTB, Xtreme MTB, Wellgo MTB, Ritchey MTB.Features:Downhill/Enduro ShoeBOA® Fit System & strap for micro-adjustmentVentilated windows with perforated mesh material for breathabilityPU reinforced areas for protection and abrasion resistance plus padded tongue for protectionHidden eyelets for durability and clean designMatch Box cleat zone optimized for any MTB pedals - ramped for easy clip-in/out and mud clearanceMC1 mid-friction compound for easy exit and cushioned EVA midsole for shock absorptionStamp tread pattern optimized for contact surface and compatibilityDirectional angled & spaced toe/heel lugs for traction while hiking andramped toe for walkability2 bolt cleat compatible - Pre-installed Match Shim for Crankbrothers pedals - Pre-installed cleat for Crankbrothers pedals Buy Crank Brothers Footwear from Chain Reaction Cycles, the World's Largest Online Bike Store.
Mallet Boa MTB Clipless Cycling Shoes (25th Anniversary)Launched to celebrate the Crankbrothers 25th anniversary, these limited-edition Mallet Boa MTB Clipless Cycling Shoes combine the same innovative design features as the original, alongside a unique splatter pattern, contrast gum outsole, and silver accents. Still overflowing with features to make your mountain biking experience more comfortable and more assured, the Mallet Boa MTB Clipless Cycling Shoes benefit from the same attention to detail that Crankbrothers apply to their pedals. The clever Match System optimises cleat engagement for any MTB clip-in system, keeping you confidently in control when flying over technical terrain.The sleek and stylish upper design uses premium materials, delivering a snug comfortable fit as well as excellent trail-ready durability. Perforations and mesh windows offer excellent breathability to avoid sweat build-up inside and ensure you enjoy fresh feet throughout your ride. A reinforced toe box protects against impacts while TPU reinforcements add abrasion resistance in vulnerable areas. A padded tongue also adds an extra layer of comfort and protection. Match Box MTB Pedal SystemCrankbrothers have carefully engineered their unique Match Box cleat box to ensure you enjoy quick and easy clipping in, no matter which clip-in MTB pedal system you prefer.Ramped zones to the front and rear of the cleat box make for a quick and easy cleat engagement and add extra mud clearance for all-weather performance. An extended cleat track, the 'race zone', lets you get just the right cleat position for bike control and pedal stability too. And with its stiff shank, you'll enjoy excellent power transfer on the more pedal-heavy bits of trail. Meanwhile, when you're off the bike and walking up to session a trail feature, the toe and heel lugs provide traction on loose and muddy surfaces and the toe is ramped for improved walkability too. Twist and GoMaking adjustment super-quick and super-easy, the BOA® Fit System lets you dial in the fit of your shoes just right every time. A simple twist of the dial offers micrometric adjustment, so your shoes are never too tight and never too loose. Plus, it's easy to adjust on-the-fly and it's light too. Cleat GuidanceThese MTB shoes are compatible with MTB pedal systems, which use cleats with SPD standard (2-bolt standard). They come supplied with pre-installed Crankbrothers Match Shim and a pre-installed cleat for Crankbrothers pedals but are compatible with other systems e.g.: Shimano SPD, Time ATAC, Look MTB, Xtreme MTB, Wellgo MTB, Ritchey MTB. Features:Downhill/Enduro ShoeBOA® Fit System and strap for micro-adjustmentVentilated windows with perforated mesh material for breathabilityPU reinforced areas for protection and abrasion resistance plus padded tongue for protectionHidden eyelets for durability and clean designMatch Box cleat zone optimised for any MTB pedals - ramped for easy clip-in/out and mud clearanceMC1 mid-friction compound for easy exit and cushioned EVA midsole for shock absorptionStamp tread pattern optimised for contact surface and compatibilityDirectional angled and spaced toe/heel lugs for traction while hiking and ramped toe for walkability2 bolt cleat compatible - pre-installed Match Shim for Crankbrothers pedals - pre-installed cleat for Crankbrothers pedalsBuy Crankbrothers cycling shoes from Chain Reaction Cycles, the World's Largest Online Bike Store.
Crankbrothers Mallet Boa MTB Clipless Cycling ShoesClip-in and go shred, the Crankbrothers Mallet Boa MTB Clipless Cycling Shoes come fitted with a Crankbrothers pedal cleat so you can be enjoying the comfort and performance of these trail-slayers in no time. Packed with features to make your mountain biking more comfortable and more assured, the Mallet Boa MTB Clipless Cycling Shoes benefit from the same attention to detail that Crankbrothers apply to their pedals. The innovative Match System optimizes cleat engagement for any MTB clip-in system, keeping you confidently in control when flying over technical terrain.The sleek and stylish upper design uses premium materials, delivering a snug comfortable fit as well as excellent trail-ready durability. Perforations and mesh windows offer excellent breathability to avoid sweat build-up inside and ensure you enjoy fresh feet throughout your ride. A reinforced toe box protects against impacts while TPU reinforcements add abrasion resistance in vulnerable areas. A padded tongue also adds an extra layer of comfort and protection. Twist and Go. Making adjustment super-quick and super-easy, the BOA® Fit System lets you dial in the fit of your shoes just right every time. A simple twist of the dial offers micrometric adjustment, so your shoes are never too tight and never too loose. Plus it's easy to adjust on-the-fly and it's light too. Match Box MTB Pedal SystemCrank Brothers have carefully engineered their innovative Match Box cleat box to ensure you enjoy quick and easy clipping in, no matter which clip-in MTB pedal system you prefer.Ramped zones to the front and rear of the cleat box make for a quick and easy cleat engagement and add extra mud clearance for all-weather performance. An extended cleat track, the 'race zone', lets you get just the right cleat position for bike control and pedal stability too. And with its stiff shank, you'll enjoy excellent power transfer on the more pedal-heavy bits of trail. Meanwhile, when you're off the bike and walking up to session a trail feature, the toe and heel lugs provide traction on loose and muddy surfaces and the toe is ramped for improved walkability too. Cleat GuidanceThese MTB shoes are compatible with MTB pedal systems, which use cleats with SPD standard (2-bolt standard). They come supplied with pre-installed Crankbrothers Match Shim and a pre-installed cleat for Crankbrothers pedals but are compatible with other systems e.g.: Shimano SPD, Time ATAC, Look MTB, Xtreme MTB, Wellgo MTB, Ritchey MTB.Features:Downhill/Enduro ShoeBOA® Fit System & strap for micro-adjustmentVentilated windows with perforated mesh material for breathabilityPU reinforced areas for protection and abrasion resistance plus padded tongue for protectionHidden eyelets for durability and clean designMatch Box cleat zone optimized for any MTB pedals - ramped for easy clip-in/out and mud clearanceMC1 mid-friction compound for easy exit and cushioned EVA midsole for shock absorptionStamp tread pattern optimized for contact surface and compatibilityDirectional angled & spaced toe/heel lugs for traction while hiking andramped toe for walkability2 bolt cleat compatible - Pre-installed Match Shim for Crankbrothers pedals - Pre-installed cleat for Crankbrothers pedals Buy Crank Brothers Footwear from Chain Reaction Cycles, the World's Largest Online Bike Store.
Mallet Boa MTB Clipless Cycling Shoes (25th Anniversary)Launched to celebrate the Crankbrothers 25th anniversary, these limited-edition Mallet Boa MTB Clipless Cycling Shoes combine the same innovative design features as the original, alongside a unique splatter pattern, contrast gum outsole, and silver accents. Still overflowing with features to make your mountain biking experience more comfortable and more assured, the Mallet Boa MTB Clipless Cycling Shoes benefit from the same attention to detail that Crankbrothers apply to their pedals. The clever Match System optimises cleat engagement for any MTB clip-in system, keeping you confidently in control when flying over technical terrain.The sleek and stylish upper design uses premium materials, delivering a snug comfortable fit as well as excellent trail-ready durability. Perforations and mesh windows offer excellent breathability to avoid sweat build-up inside and ensure you enjoy fresh feet throughout your ride. A reinforced toe box protects against impacts while TPU reinforcements add abrasion resistance in vulnerable areas. A padded tongue also adds an extra layer of comfort and protection. Match Box MTB Pedal SystemCrankbrothers have carefully engineered their unique Match Box cleat box to ensure you enjoy quick and easy clipping in, no matter which clip-in MTB pedal system you prefer.Ramped zones to the front and rear of the cleat box make for a quick and easy cleat engagement and add extra mud clearance for all-weather performance. An extended cleat track, the 'race zone', lets you get just the right cleat position for bike control and pedal stability too. And with its stiff shank, you'll enjoy excellent power transfer on the more pedal-heavy bits of trail. Meanwhile, when you're off the bike and walking up to session a trail feature, the toe and heel lugs provide traction on loose and muddy surfaces and the toe is ramped for improved walkability too. Twist and GoMaking adjustment super-quick and super-easy, the BOA® Fit System lets you dial in the fit of your shoes just right every time. A simple twist of the dial offers micrometric adjustment, so your shoes are never too tight and never too loose. Plus, it's easy to adjust on-the-fly and it's light too. Cleat GuidanceThese MTB shoes are compatible with MTB pedal systems, which use cleats with SPD standard (2-bolt standard). They come supplied with pre-installed Crankbrothers Match Shim and a pre-installed cleat for Crankbrothers pedals but are compatible with other systems e.g.: Shimano SPD, Time ATAC, Look MTB, Xtreme MTB, Wellgo MTB, Ritchey MTB. Features:Downhill/Enduro ShoeBOA® Fit System and strap for micro-adjustmentVentilated windows with perforated mesh material for breathabilityPU reinforced areas for protection and abrasion resistance plus padded tongue for protectionHidden eyelets for durability and clean designMatch Box cleat zone optimised for any MTB pedals - ramped for easy clip-in/out and mud clearanceMC1 mid-friction compound for easy exit and cushioned EVA midsole for shock absorptionStamp tread pattern optimised for contact surface and compatibilityDirectional angled and spaced toe/heel lugs for traction while hiking and ramped toe for walkability2 bolt cleat compatible - pre-installed Match Shim for Crankbrothers pedals - pre-installed cleat for Crankbrothers pedalsBuy Crankbrothers cycling shoes from Chain Reaction Cycles, the World's Largest Online Bike Store.
The ultimate pedal for enduro racing and riding. The mallet E was developed with the help some well known enduro athletes. 12% smaller than the Mallet DH pedals but with many of its well loved features. There are 2 different axle lengths available 52mm or 57mm (the 57mm pedal is only available in a half black/half blue colour option). The 52mm will provide an engagement point and Q factor similar to other brands of pedals. If you have been previously using the Mallet DH pedal you may benefit from using the longer axle version. Riders who prefer a wider Q factor / have less crankarm / pedal clearance may also benefit from the longer axle pedals. Concave pedal platform for secure foothold. Like it’s DH equivalent you get that flat pedal feel whilst running clipless. 49g lighter and 12% smaller pedal body than the crankbrothers Mallet DH pedal with a 52mm Q-Factor compared to 57mm on the DH equivalent. Ribbed body allows for better traction when unclipped Chamfered edges for reduction in rock strikes Excellent mud-shedding: the design is very open. 4-sided entry: clip in on all 4 sides of the pedal by pushing forward or pulling backwards on the pedal. Increased float: 6° of side-to-side rotational play. The float of the pedal allows for the rider to shift positions on the bike while keeping their feet clipped into the pedal. This allows for improved rider control and bike handling. Fit adjustment: crankbrothers premium cleats can be adjusted for either 15° or 20° release angle. Zero-float cleats can be purchased separately (link to these). Customise the fit between your shoe/pedal interface by using integrated traction pads. The pedals come with the 1mm tread pads fitted and include set of 2mm pads in the box. Outer enduro cartridge bearing is designed specifically for pedals. Enduro use superior materials grease and sealing on their bearings which are designed especially for use on a bike. Inner igus LL-glide bearing has been exclusively formulated for crankbrothers. It performs in even the most adverse conditions out on the trails. Double seal system combines a double lip internal seal and a new external seal to keep water and debris from entering the pedal. crankbrothers pedals are fully re-buildable for simple maintenance. There is a consistency in parts across all pedal models which allows for ease of servicing this is easily done using the pedal refresh kit (CRB-16051). Specification Weight (per pair): 419g Spindle: Forged scm 435 chromoly steel Body: 6061-T6 aluminium Wings: 17-4PH stainless Spring: 300 series stainless steel Inner bearing: Igus LL-glide bearing Outer bearing: Enduro cartridge bearing Pins: 12 pins per pedal Cleats: Premium brass cleats included Release angle: 15° or 20° Warranty: 5 years
The design for the original crankbrothers pedal began out of frustration. The founders of crankbrothers Carl and Frank were tired of getting stuck in mud-covered pedals with no way in or out. They realised that existing pedals were too complicated…. It started with a simple question: what is the best way to attach a shoe to a crank? To answer this question Carl and Frank created a system with only two moving parts hinging on a spring. This system became known as the eggbeater pedal and later it was adapted into the candy pedal. The candy 7 pedal is a clipless pedal with a platform offering improved stability across a wide range of disciplines from all mountain / trail to cyclo-cross. The pedal body is 10% larger than the level 1 2 and 3 pedal bodies. The chamfered edges help to minimise rock strikes. There is an ongoing debate amongst many riders about which is best candy or eggbeater. The candy pedal provides an additional platform which is confidence inspiring and also gives some support or those moments when you’ve unclipped but are unsure if you need to get your foot down for a dab jump off the bike or quickly get clipped in again and put the power down. Excellent mud-shedding: the design is very open. Ribbed body for extra traction when unclipped 4-sided entry: clip in on all 4 sides of the pedal by pushing forward or pulling backwards on the pedal. Increased float: 6° of side-to-side rotational play. The float of the pedal allows for the rider to shift positions on the bike while keeping their feet clipped into the pedal. This allows for improved rider control and bike handling. Fit adjustment: crankbrothers premium cleats can be adjusted for either 15° or 20° release angle. Zero-float cleats can be purchased separately (link to these). Customise the fit between your shoe/pedal interface by using integrated traction pads. The pedals come with the 1mm tread pads fitted and include set of 2mm pads in the box. Chamfered edges help reduce rock strikes Outer enduro cartridge bearing is designed specifically for pedals. Enduro use superior materials grease and sealing on their bearings which are designed especially for use on a bike. Inner igus LL-glide bearing has been exclusively formulated for crankbrothers. It performs in even the most adverse conditions out on the trails. Double seal system combines a double lip internal seal and a new external seal to keep water and debris from entering the pedal. crankbrothers pedals are fully re-buildable for simple maintenance. There is a consistency in parts across all pedal models which allows for ease of servicing this is easily done using the pedal refresh kit (CRB-16051). candy 7 Weight (per pair) 320g Spindle Forged scm 435 chromoly steel Body 6061-T6 aluminium Wings 17-4PH stainless Spring 300 series stainless steel inner bearing Igus LL-glide bearing outer bearing Enduro cartridge bearing Cleats premium brass cleats included release angle 15° or 20° Warranty 5 years
The ultimate pedal for enduro racing and riding.The mallet E was developed with the help some well known enduro athletes. 12% smaller than the Mallet DH pedals but with many of its well loved features. There are 2 different axle lengths available 52mm or 57mm (the 57mm pedal is only available in a half black/half blue colour option). The 52mm will provide an engagement point and Q factor similar to other brands of pedals. If you have been previously using the Mallet DH pedal you may benefit from using the longer axle version. Riders who prefer a wider Q factor / have less crankarm / pedal clearance may also benefit from the longer axle pedals. Available in black or blue colour options with the standard 52mm axle or half black / half blue with the longer 57mm axle. Concave pedal platform for secure foothold. Like it’s DH equivalent you get that flat pedal feel whilst running clipless. 49g lighter and 12% smaller pedal body than the crankbrothers Mallet DH pedal with a 52mm Q-Factor compared to 57mm on the DH equivalent. Ribbed body allows for better traction when unclipped Chamfered edges for reduction in rock strikes Excellent mud-shedding: the design is very open. 4-sided entry: clip in on all 4 sides of the pedal by pushing forward or pulling backwards on the pedal. Increased float: 6° of side-to-side rotational play. The float of the pedal allows for the rider to shift positions on the bike while keeping their feet clipped into the pedal. This allows for improved rider control and bike handling. Fit adjustment: crankbrothers premium cleats can be adjusted for either 15° or 20° release angle. Zero-float cleats can be purchased separately (link to these). Customise the fit between your shoe/pedal interface by using integrated traction pads. The pedals come with the 1mm tread pads fitted and include set of 2mm pads in the box. Outer enduro cartridge bearing is designed specifically for pedals. Enduro use superior materials grease and sealing on their bearings which are designed especially for use on a bike. Inner igus LL-glide bearing has been exclusively formulated for crankbrothers. It performs in even the most adverse conditions out on the trails. Double seal system combines a double lip internal seal and a new external seal to keep water and debris from entering the pedal. crankbrothers pedals are fully re-buildable for simple maintenance. There is a consistency in parts across all pedal models which allows for ease of servicing this is easily done using the pedal refresh kit (CRB-16051). Mallet E Weight (per pair) 419g Spindle Forged scm 435 chromoly steel Body 6061-T6 aluminium Wings 17-4PH stainless Spring 300 series stainless steel inner bearing Igus LL-glide bearing outer bearing Enduro cartridge bearing Pins 12 pins per pedal Cleats premium brass cleats included release angle 15° or 20° Warranty 5 years
The flat pedal from crankbrothers is engineered to provide the optimal interface between shoe and pedal. The 13mm external and 11mm internal thickness on the level 7 stamp provide a low profile concave pedal body that your feet sit into. Adjustable pins allow the rider to fine tune the feel. The outsole profiles of the top mountain bike show brands were analysed and the data used to create two distinct surface areas to optimise shoe/pedal contact across all of these different models. The small is designed for EU shoe sizes from 37-43 and 43-49 for large. Once the optimal sizes had been established the features required for the ideal flat pedal were also incorporated. Concave pedal platform so that your shoe feels like it sits into the pedal and feels connected. 13mm external and 11mm internal thickness. 20 adjustable pins per pedal. 8mm in the centre of the pedal and 10mm on the outer edges. Internals run on igus LL-glide bearing which has been exclusively formulated for crankbrothers. It performs in even the most adverse conditions out on the trails. Small: 100mm x 100mm pedal body footprint Large: 114mm x 111mm pedal body footprint Available in red or black Specification Weight: 345g (Small) 375g (Large) Spindle: Forged scm 435 chromoly steel Body: Forged 6061-T6 Inner bearing: Igus LL-glide bearing Outer bearing: Igus LL-glide bearing Body dimensions: 100mm x 100mm (Small) 114mm x 111m (Large) Pins: 10 adjustable pins per side Warranty: 5 years
Crankbrothers have released a range of shoes to Match their pedal system. The Mallet BOA is the perfect pair to combine with Mallet DH pedals and hit the trails.Featuring an additional 5mm length track length for a slammed back cleat position for control and stability when dropping the heels when the taking on the most aggressive trails. Upper BOA Fit System & Strap for micro-adjustment. Lace pocket at the top of the tongue to store away your laces for safety and clean aesthetic. Ventilated windows with perforated mesh material for breathability. Padded tongue for protection. TPU reinforced areas for protection and abrasion resistance. Heel dots for grip and superior heel hold. Hidden eyelets for durability and clean design. Outsole Match Box optimised for any MTB pedals; Race zone cleat placement for control and stability. Ramp for easy clip-in / clip-out and mud clearance. Pre-installed crankbrothers match shim and cleat - just adjust and tighten and they're ready to ride. Can be used with any brand of SPD cleat simply remove the grey match shim and set up directly in the match box. MC1 mid-friction compound for easy exit from the pedal. Directional angled and spaced toe / heel lugs for traction whilst hiking. Ramped toe for walkability. Stiff shank for power transfer when pedalling. Cushioned EVA midsole for shock absorption. Sizing uses a USA last so select size based on UK normal shoe sizing. The range runs true to size so there's no need to size up. They're available in sizes 4 - 13 with half sizes available from 5.5 - 11.5.
Shoes designed to match crankbrothers pedal ranges. Mallet E is designed to be ideal for big days out on the bike. They combine a stiff shank for pedalling efficiency with a ramped toe and grippy tread making them ideal for hike a bike situations. Combine with the Mallet E or Mallet E long spindle pedals. Upper BOA Fit System & strap for micro-adjustment. Lace pocket at the top of the tongue to store away your laces for safety and clean aesthetic. Ventilated windows with perforated mesh material for breathability. Padded tongue for protection. TPU reinforced areas for protection and abrasion resistance. Heel dots for grip and superior heel hold. Hidden eyelets for durability and clean design. Outsole Match Box optimised for any MTB pedals; Ramp for easy clip-in / clip-out and mud clearance Pre-installed crankbrothers match shim and cleat - just adjust and tighten and they're ready to ride. Can be used with any brand of SPD cleat simply remove the grey match shim and set up directly in the match box. MC1 mid-friction compound for easy exit from the pedal. Directional angled and spaced toe / heel lugs for traction whilst hiking. Ramped toe for walkability. Stiff shank for power transfer when pedalling. Cushioned EVA midsole for shock absorption. Sizing uses a USA last so select size based on UK normal shoe sizing. The range runs true to size so there's no need to size up. They're available in sizes 4 - 13 with half sizes available from 5.5 - 11.5.