The world’s most successful downhill / race pedal just got even better! Dual-chamfered edges reduce costly rock strikes, and combined with proven traction pad technology Mallet DH maximises your performance. Mallet pedals feature a double sided open design allowing for quick and reliable engagement with minimal mud clogging. A two piece body keeps the weight down whilst providing a strong and durable platform. Mallet DH are the clipless pedal of choice by most Pro World Cup riders.The ability to set the release angle of the cleats to either 15° to 20° means you can be really active on the pedal whilst still remaining attached to the bike. The concave pedal body gives a flat pedal feel with the assurance that you are connected to the bike.Key Features:Release angle: 15° to 20°,Cleat: Premium brass cleats included,Warranty: 5 years,Weight: 479g per pair,Platform: Extruded/machined aluminium,Wings: cast stainless steel,Spring: 300 series spring stainless steel,Spindle: Forged scm435 chromoly steel,Q-factor: 57mm,Inner bearing: igus LL-glide bearing has been exclusively formulated for crankbrothers. It performs in even the most adverse conditions out on the trails,Outer bearing: enduro cartridge bearing is designed specifically for pedals. Enduro use superior materials, grease and sealing on their bearings which are designed especially for use on a bike,Double seal system combines a double lip internal seal and a new external seal to keep water and debris from entering the pedal,Traction pins: 8mm adjustable,Excellent mud-shedding: using the very open designed pedal platform,Dual chamfered edges to reduce rock strikes,Ribbed body for extra traction when unclipped,4-sided entry: clip in on all 4 sides of the pedal, by pushing forward or pulling backwards on the pedal,Extremely lightweight: pedal design is very simple with only a few key parts,Increased float: 6° of side-to-side rotational play. The float of the pedal allows for the rider to shift positions on the bike, while keeping their feet clipped into the pedal. This allows for improved rider control and bike handling,Fit adjustment: crankbrothers premium cleats can be adjusted for either 15° or 20° release angle. Zero-float cleats can be purchased separately,crankbrothers pedals are fully re-buildable for simple maintenance. There is a consistency in parts across all pedal models, which allows for ease of servicing, this is easily done using the pedal refresh kit (CRB-16051). Servicing is simple and does not require any specialist tools, just a flat head screwdriver, socket wrench and 8mm allen key to hold the pedal by the axle.
The design for the original crankbrothers pedal began out of frustration. The founders of crankbrothers, Carl and Frank, were tired of getting stuck in mud-covered pedals with no way in or out. They realised that existing pedals were too complicated….It started with a simple question: what is the best way to attach a shoe to a crank? To answer this question, Carl and Frank created a system with only two moving parts hinging on a spring. This system became known as the eggbeater pedal, and later it was adapted into the candy pedal. The candy 7 pedal is a clipless pedal with a platform offering improved stability across a wide range of disciplines from all mountain / trail to cyclo-cross. The pedal body is 10% larger than the level 1, 2 and 3 pedal bodies. The chamfered edges help to minimise rock strikes.There is an ongoing debate amongst many riders about which is best, candy or eggbeater. The candy pedal provides an additional platform which is confidence inspiring and also gives some support or those moments when you’ve unclipped but are unsure if you need to get your foot down for a dab, jump off the bike or quickly get clipped in again and put the power down.Key Features:Excellent mud-shedding: the design is very open.,Ribbed body for extra traction when unclipped,4-sided entry: clip in on all 4 sides of the pedal, by pushing forward or pulling backwards on the pedal.,Increased float: 6° of side-to-side rotational play. The float of the pedal allows for the rider to shift positions on the bike, while keeping their feet clipped into the pedal. This allows for improved rider control and bike handling.,Fit adjustment: crankbrothers premium cleats can be adjusted for either 15° or 20° release angle. Zero-float cleats can be purchased separately (link to these).,Customise the fit between your shoe/pedal interface by using integrated traction pads. The pedals come with the 1mm tread pads fitted and include set of 2mm pads in the box.,Chamfered edges help reduce rock strikes,Outer enduro cartridge bearing is designed specifically for pedals. Enduro use superior materials, grease and sealing on their bearings which are designed especially for use on a bike.,Inner igus LL-glide bearing has been exclusively formulated for crankbrothers. It performs in even the most adverse conditions out on the trails. ,Double seal system combines a double lip internal seal and a new external seal to keep water and debris from entering the pedal.,crankbrothers pedals are fully re-buildable for simple maintenance. There is a consistency in parts across all pedal models, which allows for ease of servicing, this is easily done using the pedal refresh kit (CRB-16051)..Specifications:Weight (per pair): 320g,Spindle: Forged scm 435 chromoly steel,Body: 6061-T6 aluminium,Wings: 17-4PH stainless,Spring: 300 series stainless steel,Inner bearing: Igus LL-glide bearing,Outer bearing: Enduro cartridge bearing,Cleats: Premium brass cleats included,Release angle: 15° or 20°,Warranty: 5 years.
crankbrothers Candy 7 Clip-In PedalsDesigned to increase your pedalling power, these Clip-In Pedals by crankbrothers offer a stable platform that is suitable for use with a variety of cycling disciplines including Mountain Bike (MTB), trail and cyclocross (CX).There is an ongoing debate amongst many riders about which is best, candy or eggbeater. The candy pedal provides an additional platform that is confidence-inspiring and also gives some support for those moments when you’ve unclipped but is unsure if you need to get your foot down for a dab, jump off the bike or quickly get clipped in again and put the power down.Crankbrothers pedals are fully re-buildable for simple maintenance. There is a consistency in parts across all pedal models, which allows for ease of servicing, this is easily done using the pedal refresh kit.Features:Spindle Material: Forged SCM 435 Chromoly (CrMo) steelBody Material: 6061-T6 aluminiumWing Material: 17-4PH stainlessSpring Material: 300 series stainless steelQ-factor: 52mmCleat Type: Premium brass cleats with shims includedInner Bearing Type: Igus LL-glide bearingOuter Bearing Type: Enduro cartridge bearingEndcap: Hex alloyWeight: 320g per pairBuy crankbrothers Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Brooks England Cambium All-Weather C13 Carved SaddleEngineered for versatility, this high-quality saddle is equally at home on the road as it is exploring gravel backroads on your bikepacking adventure. Wherever your ride takes you, this model's continuous carbon oval rails ensure that you enjoy a strong hold to your seatpost without any unnecessary weight holding you back. Brooks England has also equipped this version with anodised rivets, which offer additional protection against corrosion during wet riding conditions. Ready for adventure, this saddle's cover features a unique nylon and vulcanised natural rubber top that's UV as well as abrasion resistant. This makes it a great choice of upgrade for riders who enjoy going the extra mile, whatever the weather conditions.Pressure Relief ChannelExclusive to this carved version, this saddle is kitted out with a single cut out that runs down its centre. This offers superior flexibility and pressure relief on more demanding journeys. In addition, its clever channel is better equipped with reduce anatomical discomfort and fatigue build up around your sit bones. This results in being able to take your adventures further while enjoying lasting comfort on every mile.Lightweight All-Weather SaddleBrooks England's lightest Cambium ever, the C13 is a racing saddle featuring a uniquely flexible vulcanised-rubber top combined with a weight-saving carbon frame. The C13 absorbs shocks and vibrations, keeping the rider in better control than common saddles with a static base and foam padding. Available in two widths, in both standard and carved versions, the C13 is the saddle for performance cycling. A lightweight and durable saddle, the C13 is finished with aluminium rivets for long-lasting use, ready for all rides, all roads and all weathers, requiring no break-in period.Features: Rail Material: Continuous Carbon (Oval) Rivet Material: Anodised Aluminium Cover Material: UV + Abrasion-Resistant Waterproof Nylon Top and Vulcanised Natural Rubber Use: Road, Touring, Gravel, Bikepacking Riding Position: Forward riding position Dimensions: 132mm: L 275 x W 132 x H 55mm; 145mm: L 275 x W 145 x H 55mm; 158mm: L 275 x W 158 x H 55mm Manufacturer's Part Numbers: C203MCA06300 Black One Size 145mm; C203WCA06300 Black Wide 158mm ; C203MCA06308 White One Size 145mm; C203CA06308 White Narrow 132mm Weight: 132mm: 250g; 145mm: 280g; 158mm: 295gTechnologies: Naturally Flexible Rubber: Cambium saddles are made from flexible natural rubber, harvested from trees. All-surface Absorption: Designed to absorb shocks and smooth out the ride. Continuously Comfortable: Provides natural comfort for the duration of the ride in all conditions, over all-terrain, performing consistently over time and through constant use. Moves with You: Rubber is a natural substance that reacts to and follows the rider's movements.Pressure Relief and Added Flex: A single cut out helps make our Carved saddles more flexible and better able to reduce anatomical discomfort. What are Cambium saddles? Cambium saddles are made from vulcanised natural rubber for flexible performance when riding, reducing shocks and vibrations and offering the rider an improved road feel over traditional foam or gel saddles. This construction of the Cambium mimics the leather saddle construction and therefore offers a similar “hammock” comfort. Cambium is also maintenance-free, meaning you do not need to adjust saddle tension. Likewise, the material we use will not be affected by rain. Cambium saddles are also available in a carved version for riders who seek to reduce pressure on the perineum or desire a more flexible saddle. How do I care for and maintain my Cambium? With the cambium range we suggest to check your rivets to see if they are still tight. Over time, due to the vibrations from the road the rivets can loosen, though this is a seldom occurrence. Remember these saddles are hand assembled in the factory, which means all maintenance can be done by hand. What can I do if my saddle makes a creaking noise? A creaking noise from your saddle likely means that the nose rails are rubbing somewhere on the rubber top. This can be alleviated with a small dab of grease. Additionally, a noise can be made where the rails meet the backplate by the little black rubber plug. In this case the saddle could be reassembled and a small amount of grease applied at the contact points.Buy Brooks England Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Developed for versatility, this high-quality saddle is equally at home on the road as it is exploring gravel backroads on your bikepacking adventure. Wherever your ride takes you, this model's continuous carbon oval rails ensure that you enjoy a strong hold to your seatpost without any unnecessary weight holding you back. Brooks England has also equipped this version with anodised rivets, which offer additional protection against corrosion during wet riding conditions. Ready for adventure, this saddle's cover features a unique nylon and vulcanised natural rubber top that's UV as well as abrasion-resistant. This makes it a great choice of upgrade for riders who enjoy going the extra mile, whatever the weather conditions. Pressure Relief Channel Exclusive to this carved version, this saddle is kitted out with a single cut out that runs down its centre. This offers superior flexibility and pressure relief on more demanding journeys. In addition, its clever channel is better equipped with reduce anatomical discomfort and fatigue build up around your sit bones. This results in being able to take your adventures further while enjoying lasting comfort on every mile. Lightweight All-Weather Saddle Brooks England's lightest Cambium ever, the C13 is a racing saddle featuring a uniquely flexible vulcanised-rubber top combined with a weight-saving carbon frame. The C13 absorbs shocks and vibrations, keeping the rider in better control than common saddles with a static base and foam padding. Available in two widths, in both standard and carved versions, the C13 is the saddle for performance cycling. A lightweight and durable saddle, the C13 is finished with aluminium rivets for long-lasting use, ready for all rides, all roads and all weathers, requiring no break-in period. Technologies: Naturally Flexible Rubber: Cambium saddles are made from flexible natural rubber, harvested from trees. All-surface Absorption: Designed to absorb shocks and smooth out the ride. Continuously Comfortable: Provides natural comfort for the duration of the ride in all conditions, over all-terrain, performing consistently over time and through constant use. Moves with You: Rubber is a natural substance that reacts to and follows the rider's movements. Pressure Relief and Added Flex: A single cut out helps make our Carved saddles more flexible and better able to reduce anatomical discomfort. What are Cambium saddles? Cambium saddles are made from vulcanised natural rubber for flexible performance when riding, reducing shocks and vibrations and offering the rider an improved road feel over traditional foam or gel saddles. This construction of the Cambium mimics the leather saddle construction and therefore offers a similar “hammock” comfort. Cambium is also maintenance-free, meaning you do not need to adjust saddle tension. Likewise, the material we use will not be affected by rain. Cambium saddles are also available in a carved version for riders who seek to reduce pressure on the perineum or desire a more flexible saddle. How do I care for and maintain my Cambium? With the cambium range we suggest to check your rivets to see if they are still tight. Over time, due to the vibrations from the road the rivets can loosen, though this is a seldom occurrence. Remember these saddles are hand assembled in the factory, which means all maintenance can be done by hand. What can I do if my saddle makes a creaking noise? A creaking noise from your saddle likely means that the nose rails are rubbing somewhere on the rubber top. This can be alleviated with a small dab of grease. Additionally, a noise can be made where the rails meet the backplate by the little black rubber plug. In this case the saddle could be reassembled and a small amount of grease applied at the contact points. Manufacturer's Part Numbers: C203MCA06300 Black One Size 145mm C203WCA06300 Black Wide 158mm C203MCA06308 White One Size 145mm C203CA06308 White Narrow 132mm
The ultimate pedal for enduro racing and riding.The Mallet E was developed with the help of some well-known enduro athletes. 12% smaller than the Mallet DH pedals but with many of its well-loved features.There are 2 different axle lengths available 52mm or 57mm (the 57mm pedal is only available in a half black/half blue colour option). The 52mm will provide an engagement point and Q factor similar to other brands of pedals. If you have been previously using the Mallet DH pedal you may benefit from using the longer axle version. Riders who prefer a wider Q factor / have less crankarm / pedal clearance may also benefit from the longer axle pedals. Key Features:Concave pedal platform for a secure foothold. Like it's DH equivalent you get that flat pedal feel whilst running clipless.,49g lighter and 12% smaller pedal body than the crankbrothers Mallet DH pedal with a 52mm Q-Factor compared to 57mm on the DH equivalent.,Ribbed body allows for better traction when unclipped,Chamfered edges for a reduction in rock strikes,Excellent mud-shedding: the design is very open.,4-sided entry: clip in on all 4 sides of the pedal, by pushing forward or pulling backwards on the pedal.,Increased float: 6° of side-to-side rotational play. The float of the pedal allows for the rider to shift positions on the bike while keeping their feet clipped into the pedal. This allows for improved rider control and bike handling.,Fit adjustment: crankbrothers premium cleats can be adjusted for either 15° or 20° release angle. Zero-float cleats can be purchased separately (link to these).,Customise the fit between your shoe/pedal interface by using integrated traction pads. The pedals come with the 1mm tread pads fitted and include set of 2mm pads in the box.,Outer enduro cartridge bearing is designed specifically for pedals. Enduro use superior materials, grease and sealing on their bearings which are designed especially for use on a bike.,Inner Igus LL-glide bearing has been exclusively formulated for crankbrothers. It performs in even the most adverse conditions out on the trails.Double seal system combines a double lip internal seal and a new external seal to keep water and debris from entering the pedal.,Crank brothers pedals are fully re-buildable for simple maintenance. There is a consistency in parts across all pedal models, which allows for ease of servicing, this is easily done using the pedal refresh kit (CRB-16051)..
Oakley Holbrook XL Grey Ink Prizm Jade Polarized SunglassesThe Oakley Holbrook XL Grey Ink Prizm Jade Polarized Sunglasses mix modern features with an iconic frame design, delivering performance and style that's right up to date. The Oakley Holbrook design is inspired by the eyewear seen on the movie icons of the golden age of film, the 1940s, 50s and 60s. This retro-feel is fused with the high-performance eyewear technology Oakley is renowned for, offering stylish sunglasses for the modern athlete. The Holbrook XL has been scaled up to fit larger faces.The iconic full-rim frame is made from Oakley’s lightweight O Matter™ material – ensuring long-lasting comfort and durability. Square ‘O’ metal icon and front rivet accents add a further touch of style to the bold frame.Elsewhere, the 6-base lens geometry, with Oakley’s High Definition Optics®, offers the clearest view and a robust toughness that can take on the trails of an active lifestyle. High Definition OpticsHigh Definition Optics (HDO®) is a collection of patented technologies that allow Oakley eyewear to meet or exceed the testing standards of the American National Standards Institute for optical clarity, visual fidelity, and impact resistance.Prizm™ Jade Polarized LensLight Transmission: 15%Light Conditions: Bright SunContrast: IncreasedBase Lens Colour: RoseOakley’s Prizm™ Jade Lens enhances your vision, boosting colours and contrasts, allowing you to see in incredible detail.FeaturesLightweight O Matter™ frame material with Square O metal icon and front rivet accentsFrame suitable for medium to extra large faces6 base lens geometry with Oakley's High Definition Optics (HDO®)Prizm™ lens technology enhances colour and contrast - allowing you to see in much greater detailHDPolarized: Minimizes glare via technology that produces a comprehensive, single-layered lensPlutonite® lens material offers top UV Protection filtering 100% of all UVA, UVB up to 400nm and some of harmful blue lightFrame Width 140.3 mm / Bridge Height 18 mm / Arm Length 137 mmBuy Oakley Sunglasses from Chain Reaction Cycles, the World's Largest Online Bike Store.
Prologo Scratch M5 PAS Nack SaddleThis stunning seat is suitable for both road and MTB use as it delivers incredible comfort and reliability wherever your journey leads you. Part of Prologo's restyled line of versatile saddles, it's equipped with 4.0 technologies which make it innovative in terms of size, shape and ergonomics. It features an ultra-tough nack rail construction which allows it to conquer road racing and trail riding, so you can maintain your momentum as it holds you in place.Open Base SaddleSetting the standard for innovation, this sleek version is kitted out with an open base. This acts in the same way as a perineal channel by eliminating pressure peaks around your pelvic area. The closure of its prostate zone also offers better protection against extreme climatic conditions such as rain or mud.Features: Rail Material: Nack Carbon Use: Road, MTB, Triathlon Dimensions: 250x140mm Rail Size: 7x9.3mm Type: Round Gender: Unisex Part Number: PL345 Weight: 155g (approx)Technologies: Multi Sector System: The MSS- Multi Sector System, designed in collaboration with the Politecnico of Milano, improves comfort and performance. The active foams, separated from each other, create 5 mapped zones that work individually, supporting the normal pedalling movement both during the pushing and pulling phases. The round shape of the SCRATCH M5 allows the pelvis to rotate naturally, creating stability and support for the lumbar areas; it also favours the distribution of pressure over a larger surface.Buy Prologo Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
To match the responsiveness of the Om frame these new forks utilize a steeper 22mm offset, are lightweight, and are fully heat treated. Increases inner fork leg radius for more tire clearance, CNC machined steer tube with welded nut/compression bolt.###section### Product Specs Steerer Length: TBC Wheel Size: 20" Material: 4130 Chromoly Dropout Size: 10mm Offset: 22mm Weight: 870g / 1.91lbs ###section###
Performance The concave pedal platform of this model offers a more secure foothold. Like its downhill (DH) equivalent, you get that flat pedal feel whilst running clipless. They're 49g lighter and 12% smaller pedal body than the crankbrothers Mallet DH pedal with a 52mm Q-Factor compared to 57mm on the DH equivalent. Ribbed body allows for better traction when unclipped whilst chamfered edges allow a reduction in rock strikes. The open design of the crankbrothers Mallet E also provides excellent mud shedding. Plus, they also boast 4-sided entry, meaning you can clip in on all 4 sides of the pedal, by pushing forward or pulling backwards on the pedal. Fit Increased float: 6° of side-to-side rotational play. The float of crankbrothers Mallet E Pedals allows for the rider to shift positions on the bike while keeping their feet clipped into the pedal. This allows for improved rider control and bike handling. Fit adjustment: crankbrothers premium cleats can be adjusted for either 15° or 20° release angle. Zero-float cleats can be purchased separately. Customise the fit between your shoe/pedal interface by using integrated traction pads. The pedals come with the 1mm tread pads fitted and include set of 2mm pads in the box. Durability The outer enduro cartridge bearing is designed specifically for pedals. Enduro use superior materials, grease and sealing on their bearings which are designed especially for use on a bike. Inner igus LL-glide bearing has been exclusively formulated for crankbrothers. It performs in even the most adverse conditions out on the trails. The double seal system combines a double lip internal seal and a new external seal to keep water and debris from entering the pedal. Maintenance Crankbrothers pedals are fully re-buildable for simple maintenance. There is a consistency in parts across all pedal models, which allows for ease of servicing, this is easily done using the pedal refresh kit. Additional Information: Warranty: 5 years
crankbrothers Mallet E PedalsDesigned with Enduro racing in mind, the Mallet E Pedals from crankbrothers feature a unique concave platform that gives you a stable and secure foothold for optimum control when tackling tough trails. PerformanceThe concave pedal platform offers a more secure foothold. Like it's Downhill (DH) equivalent you get that flat pedal feel whilst running clipless. 49g lighter and 12% smaller pedal body than the crankbrothers Mallet DH pedal with a 52mm Q-Factor compared to 57mm on the DH equivalent. The ribbed body allows for better traction when unclipped whilst chamfered edges allow a reduction in rock strikes. The open design also provides excellent mud shedding. 4-sided entry: clip in on all 4 sides of the pedal, by pushing forward or pulling backwards on the pedal.FitIncreased float: 6° of side-to-side rotational play. The float of the pedal allows for the rider to shift positions on the bike while keeping their feet clipped into the pedal. This allows for improved rider control and bike handling.Fit adjustment: crankbrothers premium cleats can be adjusted for either 15° or 20° release angle. Zero-float cleats can be purchased separately.Customise the fit between your shoe/pedal interface by using integrated traction pads. The pedals come with the 1mm tread pads fitted and include set of 2mm pads in the box.DurabilityOuter enduro cartridge bearing is designed specifically for pedals. Enduro use superior materials, grease and sealing on their bearings which are designed especially for use on a bike. Inner igus LL-glide bearing has been exclusively formulated for crankbrothers. It performs in even the most adverse conditions out on the trails.The double seal system combines a double lip internal seal and a new external seal to keep water and debris from entering the pedal.MaintenanceCrankbrothers pedals are fully re-buildable for simple maintenance. There is a consistency in parts across all pedal models, which allows for ease of servicing, this is easily done using the pedal refresh kit.Features:Spindle Material: Forged SCM 435 Chromoly (CrMo) steelBody Material: 6061-T6 aluminiumWing Material: 17-4PH stainlessPins: 12 pins per pedalSpring Material: 300 series stainless steelQ-factor: 52mmInner Bearing Type: Igus LL-glide bearingOuter Bearing Type: Enduro cartridge bearingEndcap: Hex alloyCleat: Premium brass cleats with shims includedWeight: 419g per pairBuy crankbrothers Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
crankbrothers Mallet E PedalsDesigned with Enduro racing in mind, the Mallet E Pedals from crankbrothers feature a unique concave platform that gives you a stable and secure foothold for optimum control when tackling tough trails. PerformanceThe concave pedal platform offers a more secure foothold. Like it's Downhill (DH) equivalent you get that flat pedal feel whilst running clipless. 49g lighter and 12% smaller pedal body than the crankbrothers Mallet DH pedal with a 52mm Q-Factor compared to 57mm on the DH equivalent. The ribbed body allows for better traction when unclipped whilst chamfered edges allow a reduction in rock strikes. The open design also provides excellent mud shedding. 4-sided entry: clip in on all 4 sides of the pedal, by pushing forward or pulling backwards on the pedal.FitIncreased float: 6° of side-to-side rotational play. The float of the pedal allows for the rider to shift positions on the bike while keeping their feet clipped into the pedal. This allows for improved rider control and bike handling.Fit adjustment: crankbrothers premium cleats can be adjusted for either 15° or 20° release angle. Zero-float cleats can be purchased separately.Customise the fit between your shoe/pedal interface by using integrated traction pads. The pedals come with the 1mm tread pads fitted and include set of 2mm pads in the box.DurabilityOuter enduro cartridge bearing is designed specifically for pedals. Enduro use superior materials, grease and sealing on their bearings which are designed especially for use on a bike. Inner igus LL-glide bearing has been exclusively formulated for crankbrothers. It performs in even the most adverse conditions out on the trails.The double seal system combines a double lip internal seal and a new external seal to keep water and debris from entering the pedal.MaintenanceCrankbrothers pedals are fully re-buildable for simple maintenance. There is a consistency in parts across all pedal models, which allows for ease of servicing, this is easily done using the pedal refresh kit.Features:Spindle Material: Forged SCM 435 Chromoly (CrMo) steelBody Material: 6061-T6 aluminiumWing Material: 17-4PH stainlessPins: 12 pins per pedalSpring Material: 300 series stainless steelQ-factor: 52mmInner Bearing Type: Igus LL-glide bearingOuter Bearing Type: Enduro cartridge bearingEndcap: Hex alloyCleat: Premium brass cleats with shims includedWeight: 419g per pairBuy crankbrothers Components from Chain Reaction Cycles, the World's Largest Online Bike Store.