Seal BMX Progression Complete BMX Gyro Brake KitThe Seal BMX Progression Complete Gyro Kit contains everything you need for care-free spinning of the bars, comprising of both upper and lower Progression cables, steel upper and lower plates and a smooth gyro system.Features: Upper and lower Progression cables Steel upper and lower platesSmooth gyro system Buy Seal BMX Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Tektro CR720 Cantis Cyclocross Cantilever BrakeThe Tektro CR720 Cantis Cyclocross Cantilever Brake is a high-performance cantilever brake. Offering more clearance than traditional Canti brakes and features a micro-tension adjuster for fine-tuning brake performance. They are easy to set-up and feature special angle adjustable brake pads to ensure you get the optimum biting point on your rims. To aid performance further, they also have adjusting bolts and bushes to ensure the correct fit.Features:Material: Forged AluminiumBrake Design: Linear SpringPads: 720.12 adjustable cartridge padsLength: 21-35 mmWeight: 126gBuy Tektro Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Miche Supertype RS Road Brake CalipersThese high-quality caliper brakes are specifically designed for road use, ensuring you enjoy efficient stopping power. Additionally, their CNC-machined and HT anodised construction maximises their rigidity and resistance to wear and cosmetic damage. Finally, their titanium and AL 7075-T6 aluminium pivot bolt screws contribute to optimised braking while maintaining a low weight, so you can maintain the edge over your competitors.Features: Material: Forged Aluminium Dimensions: 39-51mm Use: Road AL 7075-T6 Aluminium nuts Titanium pivots and screws Brake pad holder with adjustable angle Weight: 284gBuy Miche Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Miche Race Road Brake CalipersThese stunning caliper brakes are specifically designed for road use as they provide a more precise and controlled feel. Additionally, their forged aluminium construction with special heat-treated steel pivots make them strong enough to tackle everything that comes with a long day out on the road. Finally, both calipers combined weigh only 330g, so you won't have to worry about adding any unnecessary weight to your ride.Features: Material: Forged Aluminium Brake Type: Dual pivot Use: Road Pins and screws in special heat-treated Steel Shoe holder with orbital adjustment Stainless Steel screws and nuts Weight: 330gBuy Miche Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Miche Performance Road Brake CaliperMiche Performance 57mm drop brakes bring you stopping power in a dual-pivot design made from lightweight alloy. They are excellent value and a good choice for Audax and winter bike builds.Features: Special steel chrome-plated screws and nuts Heat-treated steel pivots Light weight alloy Dual pivot Drop: 41 - 57mm Weight 325gBuy Miche Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope Tech 3 E4 Brake (No Rotor)The Hope Tech 3 E4 Brake (No Rotor) is perfect for all-mountain and enduro riders who like to push the pace and need a reliable model with top-notch stopping power. Its solid one-piece CNC-machined T6 aluminium caliper construction boasts 5% greater stopping power in comparison to its previous model. Finally, this revised caliper and strong lever offers a wide range of riders the power and adjustability they need to perform at their best when out on the trails.Features:Material: CNC-machined T6 AluminiumTech 3 lever offers genuine bite point and reach adjustment without toolsUses post mount, 9.74 caliper with adapters to suit all mount optionsTop entry pad fittingThe Tech 3 lever is directly compatible with Shimano I-Spec shiftersE4 caliper uses 4x16mm phenolic pistons to give more usable powerShimano I Spec shifters can be fitted directly to lever bodyLever comes with an anodised finish for durabilityAvailable to fit 160, 180, 183, 200 and 203mm front and rear rotorsNo rotors are supplied with this modelWeight: 266g (Standard hose); 300g (braided hose)Buy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope Tech 3 E4 Brake (No Rotor)The Hope Tech 3 E4 Brake (No Rotor) is perfect for all-mountain and enduro riders who like to push the pace and need a reliable model with top-notch stopping power. Its solid one-piece CNC-machined T6 aluminium caliper construction boasts 5% greater stopping power in comparison to its previous model. Finally, this revised caliper and strong lever offers a wide range of riders the power and adjustability they need to perform at their best when out on the trails.Features:Material: CNC-machined T6 AluminiumTech 3 lever offers genuine bite point and reach adjustment without toolsUses post mount, 9.74 caliper with adapters to suit all mount optionsTop entry pad fittingThe Tech 3 lever is directly compatible with Shimano I-Spec shiftersE4 caliper uses 4x16mm phenolic pistons to give more usable powerShimano I Spec shifters can be fitted directly to lever bodyLever comes with an anodised finish for durabilityAvailable to fit 160, 180, 183, 200 and 203mm front and rear rotorsNo rotors are supplied with this modelWeight: 266g (Standard hose); 300g (braided hose)Buy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope Tech 3 E4 Brake (No Rotor)The Hope Tech 3 E4 Brake (No Rotor) is perfect for all-mountain and enduro riders who like to push the pace and need a reliable model with top-notch stopping power. Its solid one-piece CNC-machined T6 aluminium caliper construction boasts 5% greater stopping power in comparison to its previous model. Finally, this revised caliper and strong lever offers a wide range of riders the power and adjustability they need to perform at their best when out on the trails.Features:Material: CNC-machined T6 AluminiumTech 3 lever offers genuine bite point and reach adjustment without toolsUses post mount, 9.74 caliper with adapters to suit all mount optionsTop entry pad fittingThe Tech 3 lever is directly compatible with Shimano I-Spec shiftersE4 caliper uses 4x16mm phenolic pistons to give more usable powerShimano I Spec shifters can be fitted directly to lever bodyLever comes with an anodised finish for durabilityAvailable to fit 160, 180, 183, 200 and 203mm front and rear rotorsNo rotors are supplied with this modelWeight: 266g (Standard hose); 300g (braided hose)Buy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope Tech 3 E4 Brake (No Rotor)The Hope Tech 3 E4 Brake (No Rotor) is perfect for all-mountain and enduro riders who like to push the pace and need a reliable model with top-notch stopping power. Its solid one-piece CNC-machined T6 aluminium caliper construction boasts 5% greater stopping power in comparison to its previous model. Finally, this revised caliper and strong lever offers a wide range of riders the power and adjustability they need to perform at their best when out on the trails.Features:Material: CNC-machined T6 AluminiumTech 3 lever offers genuine bite point and reach adjustment without toolsUses post mount, 9.74 caliper with adapters to suit all mount optionsTop entry pad fittingThe Tech 3 lever is directly compatible with Shimano I-Spec shiftersE4 caliper uses 4x16mm phenolic pistons to give more usable powerShimano I Spec shifters can be fitted directly to lever bodyLever comes with an anodised finish for durabilityAvailable to fit 160, 180, 183, 200 and 203mm front and rear rotorsNo rotors are supplied with this modelWeight: 266g (Standard hose); 300g (braided hose)Buy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope Tech 3 E4 Brake (No Rotor)The Hope Tech 3 E4 Brake (No Rotor) is perfect for all-mountain and enduro riders who like to push the pace and need a reliable model with top-notch stopping power. Its solid one-piece CNC-machined T6 aluminium caliper construction boasts 5% greater stopping power in comparison to its previous model. Finally, this revised caliper and strong lever offers a wide range of riders the power and adjustability they need to perform at their best when out on the trails.Features:Material: CNC-machined T6 AluminiumTech 3 lever offers genuine bite point and reach adjustment without toolsUses post mount, 9.74 caliper with adapters to suit all mount optionsTop entry pad fittingThe Tech 3 lever is directly compatible with Shimano I-Spec shiftersE4 caliper uses 4x16mm phenolic pistons to give more usable powerShimano I Spec shifters can be fitted directly to lever bodyLever comes with an anodised finish for durabilityAvailable to fit 160, 180, 183, 200 and 203mm front and rear rotorsNo rotors are supplied with this modelWeight: 266g (Standard hose); 300g (braided hose)Buy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope Tech 3 E4 Brake (No Rotor)The Hope Tech 3 E4 Brake (No Rotor) is perfect for all-mountain and enduro riders who like to push the pace and need a reliable model with top-notch stopping power. Its solid one-piece CNC-machined T6 aluminium caliper construction boasts 5% greater stopping power in comparison to its previous model. Finally, this revised caliper and strong lever offers a wide range of riders the power and adjustability they need to perform at their best when out on the trails.Features:Material: CNC-machined T6 AluminiumTech 3 lever offers genuine bite point and reach adjustment without toolsUses post mount, 9.74 caliper with adapters to suit all mount optionsTop entry pad fittingThe Tech 3 lever is directly compatible with Shimano I-Spec shiftersE4 caliper uses 4x16mm phenolic pistons to give more usable powerShimano I Spec shifters can be fitted directly to lever bodyLever comes with an anodised finish for durabilityAvailable to fit 160, 180, 183, 200 and 203mm front and rear rotorsNo rotors are supplied with this modelWeight: 266g (Standard hose); 300g (braided hose)Buy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope Tech 3 E4 Brake (No Rotor)The Hope Tech 3 E4 Brake (No Rotor) is perfect for all-mountain and enduro riders who like to push the pace and need a reliable model with top-notch stopping power. Its solid one-piece CNC-machined T6 aluminium caliper construction boasts 5% greater stopping power in comparison to its previous model. Finally, this revised caliper and strong lever offers a wide range of riders the power and adjustability they need to perform at their best when out on the trails.Features:Material: CNC-machined T6 AluminiumTech 3 lever offers genuine bite point and reach adjustment without toolsUses post mount, 9.74 caliper with adapters to suit all mount optionsTop entry pad fittingThe Tech 3 lever is directly compatible with Shimano I-Spec shiftersE4 caliper uses 4x16mm phenolic pistons to give more usable powerShimano I Spec shifters can be fitted directly to lever bodyLever comes with an anodised finish for durabilityAvailable to fit 160, 180, 183, 200 and 203mm front and rear rotorsNo rotors are supplied with this modelWeight: 266g (Standard hose); 300g (braided hose)Buy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.