Fenwicks Disc Brake CleanerFast and efficient, this disc-brake specific cleaning fluid keeps your rotors spick and span thanks to its evaporating, triple solvent formula. Fit for use on a variety of contaminants, it gives a thorough clean and a dry finish while reducing brake squeal and improving overall performance. Features:Formula: Triple SolventSuitability: Disc brakesInstructions for use: Step 1: Initially, spray from a distance of 20cm to wet down the surface to be cleaned - use short blastsStep 2: Leave for 10 secondsStep 3: After surfaces have been wetted, blast away contaminants by moving the aerosol closer and using prolonged bursts. Catch residue with an absorbent clothTop Tip: If used as a chain degreaser re-lube using a Fenwick's chain lubeBuy Fenwicks Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Finish Line Mineral Oil Brake FluidThis top-quality model features leading-edge chemistry which provides your hydraulic disc brakes with incredible fluid life and braking performance. Additionally, it's formulated with a low viscosity base oil which delivers a superior response, pad retraction and consistent performance through a full range of braking temperatures. Features: Specifically engineered for use in bicycle hydraulic disc brakes Provides maximum fluid life and braking performance, even at low temperatures Prevents foaming and overheatingBuy Finish Line Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Finish Line Brake Fluid (DOT 5.1)This high-quality model meets 5.1 specifications and it's an approved replacement fluid for braking systems requiring DOT 3, 4 and 5.1. Additionally, it features a super-low viscosity for superior lever response, pad retraction and consistent performance. Finally, it prevents foaming and overheating through a full range of braking operating temperatures. Features: Specifically engineered for use in bicycle hydraulic disc brakes Provides maximum fluid life and braking performance, even at low temperatures Prevents foaming and overheating Meets DOT 3, 4, and 5.1 specificationsBuy Finish Line Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Brake Rotor Truing Fork DT-2A very useful addition to any busy home or professional bike mechanic’s toolbox, the DT-2 disc brake rotor truing tool benefits from Park Tool’s renowned quality and durability. This easy to use bike tool prevents oily fingerprints from getting on the braking surface and it's two slot sizes to give you the ability to make minor edge adjustments or more major repairs.Features: Material: Laser cut from high-quality Stainless Steel Specially designed and precisely manufactured to gently adjust bent or damaged brake rotors Features two different slot depths Centre of handle is vinyl dipped for comfort Dimensions: 25.4 x 10.16 x 2.54cm Manufacturer's Part Number: QKDT2C Weight: 199.5g (approx)Buy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Caliper Brake Wrench - CBWThese small, nickel plated wrenches can be used on brakes, derailleurs, etc. CBW wrenches are nominally 1/8" (3.2mm) thick.Buy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Disc Brake Mount Facing Set (DT-5.2) Designed for accurate facing of front and rear disc mounts, the Park Tool Disc Brake Mount Facing Set DT-5.2 is a precision tool system that helps to eliminate poor brake performance, noisy braking and premature wear of parts caused by misaligned disc brake mounts.Robust and VersatileSuitable for facing IS Mounts, Post Mounts and low clearance chainstay mounts, the DT-5.2 works with any open or thru-axle dropout setup and width thanks to its telescopic axle adaptors. Complete with a pair of IS Mount and Post and Flat Mount cutters and a solid, compact storage case, the Park Tool Disc Brake Mount Facing Set DT-5.2 is just the job for any workshop or service area.Features: Compatible Mounts: Any IS Mount, Post Mounts, Flat Mounts, Low-Clearance Chainstay Mounts Compatible Axles: Open, Thru-Axle (including Boost 110, Boost 148 and all fat bike axles) Buy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
LifeLine Pro Disc Brake Caliper Alignment ToolLifeLine's disc brakes caliper alignment tool enables you to get optimum disc brake performance and equal brake pad spacing while reducing pad rubbing and brake squeal. This easy to use tool sets the correct clearance so that both brake pads connect with the rotor at the same time when you're applying pressure to the brake lever. Providing more efficient braking power and a greater pad-life, this essential maintenance tool should be in every disc brake user's toolbox.Follow the simple steps below: Loosen the bolts holding the brake caliper to the adaptor/frame. Just loosen it sufficiently so that the brake caliper can slide from side to side Insert the Caliper Alignment Tool between the pads and the rotor Pull the brake lever, forcing the pads against the alignment tool and against the rotor While still holding on to the brake lever, tighten the bolts on the brake caliper Release the brake lever and remove the tool and your pads should now be centred to the rotor with an equal distance either sideFeatures: Size: 15cm x 3.5cm Blade Length: 13cm Weight: 33gBuy LifeLine Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Lifeline Disc Brake Rotor Wear IndicatorThe Lifeline Disc Brake Rotor Wear Indicator is a convenient, easy to use and essential maintenance tool that enables you to keep your disc brake performance as good as it can be. Simply find the relevant slot that matches the brand of rotor you're riding with. If the rotor slides into the slot, then it's worn and needs replacing. If the rotor doesn't fit in the slot, then you've still got enough material on the rotor to ensure effective braking.The tool has been precisely machined to ensure you get accurate results.Compatibility: The 2mm slot minimum thickness is a gauge for Tektro and TRP Ebike rotors. The 1.8mm slot minimum thickness is a gauge for Magura rotors. The 1.55mm slot minimum thickness is a gauge for SRAM rotors. The 1.5mm slot minimum thickness is a gauge for Shimano and Hope rotors.Features: Precise CNC Machining Tool Dimensions: 100mm x 28mm x 10mm Each gauge is 15mm deep Weight: 74gBuy Lifeline Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
LifeLine Hydraulic Disc Brake Hose CutterThe Hydraulic Disc Brake Hose Cutter from LifeLine is ideal for getting a clean cut on your hydraulic disc brake hoses when shortening hose-length or when carrying out essential brake maintenance.High-Quality Disc Brake Hose CutterThis genuine LifeLine workshop-quality hose cutter features a spring-loaded mechanism and a lock for a combination of comfortable ergonomics and safety when not in use. Features: Reliable set of hydraulic hose cutters Ensures a nice clean cut Spring-loaded with lockBuy LifeLine Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Hydraulic Brake Piston Press PP-1.2Repair your hydraulic disc brake faster and with ease thanks to this Piston Press from Park Tool. This wedge can be inserted into a hydraulic disc brake caliper so you can pre-set the piston when performing component maintenance.The Park Tool PP-1 slides between the brake pads inside a caliper allowing the user to spread the pads and compress the pistons when servicing pads or wheels. The PP-1 expands the gap between the pads, making it easy to insert the disc between the pads when re-installing a caliper or wheel. "Sure-Grip" dual-density handle provides a positive grip.Features:Makes hydraulic disc brake maintenance and repair faster and easierForged steel construction with a plated finishComfortable rubber grip handleBuy Park Tool PP1 Brake Piston Press from Chain Reaction Cycles, the World's Largest Online Bike Store.
LifeLine Pro Brake Piston Press Brake piston press designed to easily push the brake pads apart to speed-up service and pad replacement. LifeLine Pro Brake Piston Press Features: Strong alloy construction. Ergonomic handle. Wedge shape helps push back pistons. Buy LifeLine Pro Brake Piston Press from Chain Reaction Cycles, the World's Largest Online Bike Store.
Tektro Seat Clamp Brake-Gear Cable HangerKeeping your brake and gear cables tidy and out of the way, this handy hanger attaches to your seatpost, giving a convenient and compact hold. Features: Material: Forged Aluminium, Black Anodised Suitable for brake or gear cablesBuy Tektro Components from Chain Reaction Cycles, the World's Largest Online Bike Store.