Hope PF46 Press Fit Stainless Bottom BracketThe external bottom bracket is available with two different bearing options. All common systems are covered with this upgrade unit, making it ideal for Shimano, Race Face and Truvativ (extra conversion kit required).The machined aluminium cups hold either full stainless steel cartridge bearings, or ceramic bearings in stainless races. These custom, Swiss made bearings are double sealed which gives much greater life span than stock units. They are also replaceable. The bearings are made by INA and have been designed to run directly on the crankset axle, without the use of shims or spacers - again increasing life and reliability. We use a non contact, free running labyrinth seal to protect the bearing externally, and the machined aluminium centre tube is sealed internally with o-rings. The unit is suitable for 68 & 73mm shell width's - with an 83mm width version and a specific road unit.Specification:Fits BB92, BB89.5 and BB86.5 framesCups pressed in and held in place by a screw in centre tube stopping any movement or play usually found in press-fit framesStainless steel or ceramic bearingsEasily serviced, replaceable sealed bearings and external labyrinth sealCompatible with any 24mm axle cranksSpecific fitting tool (made by Hope) required for fitmentBuy Hope PF46 Press Fit Bottom Bracket from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope Road Stainless Steel Bottom BracketThe eagerly anticipated road specific external bottom bracket is now available. The machined aluminium cups hold full stainless steel cartridge bearings.These custom, Swiss made bearings are double sealed, fully serviceable and removable which gives a much greater life span than stock units. The bearings are made (as all Hope bearings are) by INA and have been designed to run directly on the crankset axle, without the use of shims or spacers - again increasing life and reliability.Hope use a non contact, free running labyrinth seal to protect the bearing externally, and the machined aluminium centre tube is sealed internally with o-rings.Features: External bottom bracket designed for threaded bottom brackets The machined aluminium cups hold either stainless steel cartridge bearings or ceramic bearings in stainless races Custom Swiss made bearings are double sealed which gives a much greater life span than stock units Cartridge bearings are replaceable Designed to suit 24mm crank axles Buy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Features: PressFit 30 to outboard bottom bracket - compatible with all standard 24 mm axles., Eliminates the need for adaptors., Serviceable, double lip sealed Enduro bearings., USA machined aluminium shell for superior function and durability., Threaded design for easy installation and removal., Fits 68 - 73 mm width shells., Black anodized.,
BB86/92 Outboard ABEC-3 BB,Serviceable, double lip sealed, Enduro bearings,The two machined aluminum cups thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life, and simplifying maintenance,USA machined aluminium cups for superior durability,Directly replaces all OEM BB86/92 bottom brackets.
This bottom bracket is the ultimate, serviceable, long-life upgrade for your frame/drivetrain when wanting to step away from the manufacturers standard BB.
PF bottom brackets are designed to fit bikes with a threadless bottom bracket cup The bearing cups thread into a centre tube to give a very secure, safe fit Cups pressed in and held in place by a screw-in centre tube to prevent slipping and play
Features: External bottom bracket designed for threaded bottom brackets Custom Swiss made bearings are double sealed which gives a much greater life span than stock units Free running labyrinth seal protects bearings and has less drag
Hope PF41 Press Fit Stainless Bottom BracketDesigned and manufactured in the UK, this Hope Press Fit bottom bracket has stainless steel bearings and suits BB92 and BB89 bottom bracket shells. It's compatible with any crank with a 24mm axle, such as Shimano Hollowtech II chainsets and SRAM GXP (with separately sold adaptors). It can also easily be serviced with replaceable sealed bearings and external labyrinth seals.Features: Type: Press Fit Bearings: Stainless Steel Axle Compatible: 24mm Cup Diameter Measurements: 41mm external, 24mm internal Bearing cups thread into a centre tube to give a very secure, safe fit Easy to service and replaceable parts Specific fitting tool required - purchased separatelyManufacturer Reference Number: BBPF41SSN Weight: 112g (approx) Buy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope PF46 Press Fit Stainless Bottom BracketThe external bottom bracket is available with two different bearing options. All common systems are covered with this upgrade unit, making it ideal for Shimano, Race Face and Truvativ (extra conversion kit required).The machined aluminium cups hold either full stainless steel cartridge bearings, or ceramic bearings in stainless races. These custom, Swiss made bearings are double sealed which gives much greater life span than stock units. They are also replaceable. The bearings are made by INA and have been designed to run directly on the crankset axle, without the use of shims or spacers - again increasing life and reliability. We use a non contact, free running labyrinth seal to protect the bearing externally, and the machined aluminium centre tube is sealed internally with o-rings. The unit is suitable for 68 & 73mm shell width's - with an 83mm width version and a specific road unit.Specification:Fits BB92, BB89.5 and BB86.5 framesCups pressed in and held in place by a screw in centre tube stopping any movement or play usually found in press-fit framesStainless steel or ceramic bearingsEasily serviced, replaceable sealed bearings and external labyrinth sealCompatible with any 24mm axle cranksSpecific fitting tool (made by Hope) required for fitmentBuy Hope PF46 Press Fit Bottom Bracket from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope Threaded 30mm MTB Bottom BracketHope’s threaded external bottom bracket is made from machined aluminium and kitted out with sealed cartridge bearings. This 30mm version is designed for use with chainsets with the larger 30mm spindle size, for more efficient power transfer. Suitable for all bike types, this smooth spinning component has advanced labyrinth seals to prevent water and dirt getting inside and to increase its durability.Features: Type: English Thread external type Bearings: Stainless Steel cartridge bearings BB Shell: BSA Thread BB Shell Frame Width Compatibility: 68mm, 73mm, 83mm, 100mm and 120mm Crank Spindle/Axle Diameter: 30mm Compatibility: All cranks with 30mm axles External bottom bracket designed for threaded bottom brackets Custom Swiss made bearings are double sealed which gives a much greater life span than stock units Free running labyrinth seal protects bearings and has less drag Cartridge bearings are replaceable Please Note: Specific fitting tool (HTT188) needed to fit bottom bracket (sold separately) Manufacturer Reference Number: BBSS30N Weight: 110gBuy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope PF46 Press Fit SRAM Bottom Bracket (30mm)Compatible with all of SRAM’s chainsets that have 30mm spindle diameters, Hope’s fully sealed pressfit bottom bracket brings you smooth and durable operation. Rather than simply being pressed into place, this bottom bracket comes with a threaded central sleeve, which prevents any slippage or play. Durable steel cartridge bearings ensure that the smooth and unrestricted rotation lasts ride after ride.Features: Material: Cups: CNC Machined Aluminium; Bearings: SteelBearings: Steel sealed cartridge bearingsSuits BB Shell size: 46mm x 68 or 73mmCup Diameter: 46mmCrank Spindle Diameter: 30mmManufacturer Reference Code: BBPF467330SSNSPF46 bottom brackets are designed to fit bikes with a 46mm threadless bottom bracket shellThe bearing cups thread into a centre tube to give a very secure, safe fitCups pressed in and held in place by a screw-in centre tube to prevent slipping and playAlso compatible with other brands of chainsets with 30mm spindlesSpecific fitting tool required (sold separately)Easy to service and replaceable partsWeight: 112g (approx.)Buy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope MTB Stainless Steel 24mm Bottom BracketCompatible with Shimano, Race Face and other cranksets, the cups of this Hope MTB Stainless Steel Bottom Bracket are manufactured from machined aluminium and hold either full stainless steel or ceramic cartridge bearings.Double Sealed and Fully Serviceable BearingsThese stainless steel custom bearings are double sealed, fully serviceable, and removable to provide a greater lifespan than stock units. The bearings of Hope's MTB bottom bracket have been designed to run directly on the crankset axle, without the use of shims or spacers - again increasing life and reliability.Protected BearingsHope uses a non-contact, free-running labyrinth seal to protect the bearing externally, and the machined aluminium centre tube is sealed internally with O-rings for superb durability.Features:Material: Machined Aluminium (cups)Suitable for 68mm and 73mm shell widthInternal and External sealingWeight: 110gBuy Hope Components from Chain Reaction Cycles, the World's Largest Online Bike Store.