The Wolf Tooth Elliptical 110 BCD 4 Bolt Chainring is not only beautifully machined and lightweight but utilises a patented wide-narrow design that is perfectly suited to 1x setups – dropped chains are a thing of the past. Unlock your dream drivetrain configuration and satisfy your inner tweaker.Bred from ice-cold Minneapolis winters this Wolf Tooth 110 BCD Chainring means more time riding and less time fumbling with dropped chains.In line with Wolf Tooth’s guiding ethos of providing unrivalled design innovation, reliability and durability, this chainring employs a patented Drop-Stop® wide-narrow tooth profile which not only keeps the chain securely in place on single chainring setups but dislodges mud, dirt and excess precipitation more efficiently. For additional security in extreme conditions, this chainring is best used with a clutch-type rear derailleur.Synonymous with ultra-high-end custom builds and stalwart steeds alike, Wolf Tooth chainrings are machined entirely in-house at Wolf Tooth’s HQ in Minnesota, USA. The anodised finish and machined lettering that adorn every chainring bear the hallmark of master craftsmanship.PowerTracWolf Tooth’s PowerTrac Elliptical (PTE) design, as the name indicates, is driven by a concern for power and traction – and crucially for you, premised on a wealth of knowledge from precision engineers who also love to ride bikes.A growing number of riders are converting to elliptical chainrings on 1x setups for the simple reason that they have been demonstrated to improve ride quality.The idea behind elliptical chainrings can be summarised as follows: biomechanical power output varies throughout a pedal stroke, at positions where power is higher, having a larger diameter section of chainring, and thus greater engagement area, translates into greater forward propulsion. At positions where biomechanical power is lower, a smaller chainring diameter means greater efficiency in rotation. Overall what this means for you is maximised power output throughout each pedal stroke.Wolf Tooth note that elliptical rings also mean steadier torque on the rear wheel as there is less spinning on the downstroke and easier rotation in between these. Steadier torque on the rear wheel gives better traction and sustained momentum – great on tough climbs and through headwinds.If you’re a discerning cyclist looking to invest in a premium-grade chainring that’ll outlast its competitors and function perfectly on a 1x set up, this is the only way to go.Key Features:Patented Drop-Stop® wide-narrow tooth profile for minimised dropped chains,Elliptical design,Perfect for 1x setups,Machined in-house at Wolf Tooth’s HQ in Minnesota, USA,Beautiful anodised finish,.Compatibility:Compatible with Dura Ace 9000, Ultegra 6800, 105 5800, Tiagra 4703 or 4700, Sora R3000 or R3030, and Claris R2000 or R2030 cranks. ,Drop-Stop® FT tooth profile is compatible with 9, 10, 11 and 12-speed chains (including SRAM Flattop),Not compatible with Shimano HG+ 12-speed chains,.
Ideal for replacing the lost bolt that came with your Wolf Tooth ReMote, this is a high-quality and genuine spare part.
Wolf Tooth Replacement Bolts for SRAM Direct Mount Chainring.
Available in a range of colours to match your frame or components colour scheme, the Wolf Tooth bolt-on seatpost clamp has a self-aligning bolt and anchor, which ensures perfect alignment when tightening. This prevents binding and creates an even hold.
We designed these bolts to be the best on the market. These single chainring optimized bolts have a 4 mm hex socket on the bolt and a 6 mm hex socket on the nut so no spanner is needed. These are 6 mm long so they work perfectly with any bolt on single chainring that does not have threaded standoffs.Compatibility:Any Wolf Tooth bolt-on Drop-Stop® chainrings with through holes,Works with other brands single chainrings as well,.Complementing products:Wolf Tooth Drop-Stop chainrings,GCX and GC cassette expanders,.Tech Specs:Designed and manufactured in Minneapolis, MN USA,7-8 NM tightening torque with light grease on threads only,Material: 7075-T6 aluminum,Size: M8 x.75 x 5,Weight: 4 bolts - 8 grams.
We designed these bolts to be the best on the market. These single chainring optimized bolts have a 4 mm hex socket on the bolt and a 6 mm hex socket on the nut so no spanner is needed. These are 6 mm long so they work perfectly with any bolt on single chainring that does not have threaded standoffs.
Wolf Tooth 104 BCD Stainless Steel ChainringReady for adventure, this solid component is compatible with 104 BCD crankset for a perfect fit. It features Wolf Tooth's patented Drop Stop technology which uses a narrow/wide tooth pattern to improve chainring life. This superb version's wide side of the tooth has maximum contact on the drive side which spreads the load while its narrow side allows for mud and debris clearance. Compatibility:These are functionally the same as the aluminium 104 BCD rings. These rings fit any 104 BCD crankset, and here are instructions on how to measure your BCD. Notes for those the plan to run a 32t chainring on a 2x Shimano crankset (XT, SLX, or Deore). 30t x 104 ring is the only Quarq power meter compatible 30t ring available.For 1x9, 1x10, 1x11 and 1x12 drivetrains (including SRAM Eagle) Compatible with all 10-, 11-, and 12-speed chains except Shimano 12-speed chains. If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention). Chainline: Chainline (approximate as BB centering and cranksets vary) 30t - 48mm on 3x cranksets and 49mm on 2xChainring bolts are required for 1x 104 x 30t - use 10mm bolts 104 x 32t uses 6mm chainring bolts If mounting a 104 BCD bashring you will need 8mm bolts which Wolf Tooth does not sell but are standard on most triple cranksets. Features: Material: Hardened and electropolished 416 Stainless Steel Use: MTB BCD: 104 Tooth Pattern: Wide/Narrow Weight: 30T: 72g; 32T: 88gBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Bottle cage bolts for strength and a bit of flash. These M5x15mm titanium water bottle cage bolts are stronger than aluminium bolts and are a solid upgrade for cyclists who carry cargo by bolting it to their frame. They are sold in packs of four.Key FeaturesCompatible with any bike with standard water bottle cage braze-ons,Max torque: 6 Nm,Wolf Tooth recommends applying a small amount of copper grease to threads before installing.
Bottle cage bolts for strength and a bit of flash. These M5x15mm titanium water bottle cage low profile bolts are stronger than aluminium bolts and are a solid upgrade for cyclists who carry cargo by bolting it to their frame. They are sold in packs of four.Key FeaturesCompatible with any bike with standard water bottle cage braze-ons,Max torque: 6 Nm,Wolf Tooth recommends applying a small amount of copper grease to threads before installing.
Key Features:The wolf tooth ultralight stem cap and bolt are sleek, subtle and sit flush against your stem. If you value every single detail of your ride then elevate to a celestial realm with this beautiful stem cap.,Machined by wolf tooth in their Minneapolis HQ using premium-grade 7075-t6 aluminium, this is a great addition to any top-end build..
Wolf Tooth Ultralight Stem Cap and BoltWhen you’re finishing off your custom bike build or customising your existing bike, small details can make a big difference. This is why Wolf Tooth has produced this lightweight 7075-T6 Aluminium Stem Cap and Bolt, which will enhance the looks of your stem and provide the durability you need for hitting the trails hard.Features: Material: Top Cap: Precision Machined from 7075-T6 Aluminium; Bolt: Alloy Steerer Tube Compatibility: Straight 1.1/8" or 1.1/8" to 1.1/2" tapered only Includes: Black Alloy bolt Torque Spec: 2-3 Nm tightening torque with light grease on threads only Made in the USA Weight: 8g (cap and bolt)Manufacturer's Part Numbers:Black: WTSTEMCAPBLK1; Blue: WTSTEMCAPBLU1; Gold: WTSTEMCAPGLD1; Green: WTSTEMCAPGRN1; Orange: WTSTEMCAPORG1; Pink: WTSTEMCAPPNK1; Purple: WTSTEMCAPPRP1; Red: WTSTEMCAPRED1; Silver: WTSTEMCAPSIL1; Teal: WTSTEMCAPTEAL1; Nickel: WTSTEMCAPNI1Buy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Ultralight Stem Cap and BoltWhen you’re finishing off your custom bike build or customising your existing bike, small details can make a big difference. This is why Wolf Tooth has produced this lightweight 7075-T6 Aluminium Stem Cap and Bolt, which will enhance the looks of your stem and provide the durability you need for hitting the trails hard.Features: Material: Top Cap: Precision Machined from 7075-T6 Aluminium; Bolt: Alloy Steerer Tube Compatibility: Straight 1.1/8" or 1.1/8" to 1.1/2" tapered only Includes: Black Alloy bolt Torque Spec: 2-3 Nm tightening torque with light grease on threads only Made in the USA Weight: 8g (cap and bolt)Manufacturer's Part Numbers:Black: WTSTEMCAPBLK1; Blue: WTSTEMCAPBLU1; Gold: WTSTEMCAPGLD1; Green: WTSTEMCAPGRN1; Orange: WTSTEMCAPORG1; Pink: WTSTEMCAPPNK1; Purple: WTSTEMCAPPRP1; Red: WTSTEMCAPRED1; Silver: WTSTEMCAPSIL1; Teal: WTSTEMCAPTEAL1; Nickel: WTSTEMCAPNI1Buy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.