Replacement female bolts for the WTP Helix front hub.
Replacement spindle bolt pair for Wethepeople Logic 22mm cranks. ###section### Product Specs Rise: N/A Bar Clamping Diameter: Chromoly Bar Clamping Diameter: TBC
Replacement female bolts for the Wethepeople Supreme front hub
Replacement female bolts for the Wethepeople Supreme rear hub
High quality alloy top cap designed to perfectly fit the Utopia and all ther aftermarket WTP forks. Square ratchet interface allows a front brake cable to pass through the steerer tube.
The Wolf Tooth 110 BCD 4 Bolt Chainring for Shimano GRX is not only beautifully machined and lightweight but utilises a patented wide-narrow design that is perfectly suited to 1x setups – dropped chains are a thing of the past. Unlock your dream drivetrain configuration and satisfy your inner tweaker.Bred from ice-cold Minneapolis winters and explicitly designed to work perfectly with Shimano GRX drivetrains, this Wolf Tooth 110 BCD Chainring means more time riding and less time fumbling with dropped chains.In line with Wolf Tooth’s guiding ethos of providing unrivalled design innovation, reliability and durability, this chainring employs a patented Drop-Stop® wide-narrow tooth profile which not only keeps the chain securely in place on single chainring setups but dislodges mud, dirt and excess precipitation more efficiently. For additional security in extreme conditions, this chainring is best used with a clutch-type rear derailleur.Synonymous with ultra-high-end custom builds and stalwart steeds alike, Wolf Tooth chainrings are machined entirely in-house at Wolf Tooth’s HQ in Minnesota, USA. The anodised finish and machined lettering that adorn every chainring bear the hallmark of master craftsmanship.If you’re a discerning cyclist looking to invest in a premium-grade chainring that’ll outlast its competitors and function perfectly on a 1x set up, this is the only way to go. Key Features: Patented Drop-Stop® wide-narrow tooth profile for minimised dropped chains,Perfect for 1x setups,Machined in-house at Wolf Tooth’s HQ in Minnesota, USA,Beautiful anodised finish,. Compatibility: Shimano GRX cranksets including RX600 and RX810,Drop-Stop® FT tooth profile is compatible with 9, 10, 11 and 12-speed chains (including SRAM Flattop),Not compatible with Shimano HG+ 12-speed chains.
The Wolf Tooth 110 BCD Asymmetric 4-Bolt Chainring for Shimano Cranks is not only beautifully machined and lightweight but utilises a patented wide-narrow design that is perfectly suited to 1x setups – dropped chains are a thing of the past. Unlock your dream drivetrain configuration and satisfy your inner tweaker.Bred from ice-cold Minneapolis winters and explicitly designed to work perfectly on anything from a cyclocross, gravel or road bike, this Wolf Tooth 110 BCD Chainring means more time riding and less time fumbling with dropped chains.In line with Wolf Tooth’s guiding ethos of providing unrivalled design innovation, reliability and durability, this chainring employs a patented Drop-Stop® wide-narrow tooth profile which not only keeps the chain securely in place on single chainring setups but dislodges mud, dirt and excess precipitation more efficiently. For additional security in extreme conditions, this chainring is best used with a clutch-type rear derailleur.Synonymous with ultra-high-end custom builds and stalwart steeds alike, Wolf Tooth chainrings are machined entirely in-house at Wolf Tooth’s HQ in Minnesota, USA. The anodised finish and machined lettering that adorn every chainring bear the hallmark of master craftsmanship.If you’re a discerning cyclist looking to invest in a premium-grade chainring that’ll outlast its competitors and function perfectly on a 1x set up, this is the only way to go.Key Features:Patented Drop-Stop® wide-narrow tooth profile for minimised dropped chains,Perfect for 1x setups,Machined in-house at Wolf Tooth’s HQ in Minnesota, USA,Beautiful anodised finish.Compatibility:Fits 110 BCD Asymmetric 4-bolt cranks,Compatible with Dura Ace 9000, Ultegra 6800, 105 5800, Tiagra 4703, and Tiagra 4700,Sizes 38T and larger are compatible with Dura Ace 9100, Ultegra 8000 and 105 R7000 but a slight modification is required due to a change in the crank arm profile. The 36T chainring will not work for this modification. Click here to see Wolf Tooth's instructions for the modification.,Confirmed modification fit with Dura Ace 9100 Power Meter in size 42t or larger,Mounts in the big ring position of the cranks but is offset inward for perfect chainline.,The stock 2x bolts will not work. You will need our 6mm bolts which are optimized for single ring mounting.,Drivetrains: 1x9, 1x10, 1x11 and 1x12 drivetrains,Compatible with all 10-, 11-, and 12-speed chains except Shimano 12-speed chains,Shimano 12-speed chains require the use of our Shimano 12-speed specific chainrings,If using a 9-speed drivetrain use a 10-speed chain. It fits tighter for better chain retention,Chainline 47.5mm.
Wolf Tooth 1X Chainring Bolts and Nuts (Pack of 4)Constructed from tough and hard-wearing 7075-T6 aluminium, this pack 1X Chainring Bolts will hold your mountain bike's (MTB's) chainring securely as you're attacking the most challenging sections of the trails. Made in the USA, they have an M8 size and a 6mm thread length, making them perfect for use with Wolf Tooth’s “Drop Stop” unthreaded chainrings and many other brands too.Features: Material: 7075-T6 Aluminium Speed: Single speed (eg. single speed drivetrains and 1x10, 1x11, 1x12-Speed drivetrains) Size: M8 x.75 x 5 Thread Length: 6mm Compatibility: Wolf Tooth's bolt-on Drop-Stop chainrings with unthreaded holes, other brands too Torque: 7-8 NM tightening torque with light grease on threads only Made in the USA Weight: 8gManufacturer's Part Numbers: Black: WT4CBCN06BLK; Blue: WT4CBCN06BLU; Gold: WT4CBCN06GLD; Green: WT4CBCN06GRN; Grey: WT4CBCN06GRY; Orange: WT4CBCN06ORG; Purple: WT4CBCN06PRP; Red: WT4CBCN06RED; Silver: WT4CBCN06SIL; Nickel: WT4CBCN06NIBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth 1X Chainring Bolts and Nuts (Pack of 4)Constructed from tough and hard-wearing 7075-T6 aluminium, this pack 1X Chainring Bolts will hold your mountain bike's (MTB's) chainring securely as you're attacking the most challenging sections of the trails. Made in the USA, they have an M8 size and a 6mm thread length, making them perfect for use with Wolf Tooth’s “Drop Stop” unthreaded chainrings and many other brands too.Features: Material: 7075-T6 Aluminium Speed: Single speed (eg. single speed drivetrains and 1x10, 1x11, 1x12-Speed drivetrains) Size: M8 x.75 x 5 Thread Length: 6mm Compatibility: Wolf Tooth's bolt-on Drop-Stop chainrings with unthreaded holes, other brands too Torque: 7-8 NM tightening torque with light grease on threads only Made in the USA Weight: 8gManufacturer's Part Numbers: Black: WT4CBCN06BLK; Blue: WT4CBCN06BLU; Gold: WT4CBCN06GLD; Green: WT4CBCN06GRN; Grey: WT4CBCN06GRY; Orange: WT4CBCN06ORG; Purple: WT4CBCN06PRP; Red: WT4CBCN06RED; Silver: WT4CBCN06SIL; Nickel: WT4CBCN06NIBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth 1X Chainring Bolts and Nuts (Pack of 4)Constructed from tough and hard-wearing 7075-T6 aluminium, this pack 1X Chainring Bolts will hold your mountain bike's (MTB's) chainring securely as you're attacking the most challenging sections of the trails. Made in the USA, they have an M8 size and a 6mm thread length, making them perfect for use with Wolf Tooth’s “Drop Stop” unthreaded chainrings and many other brands too.Features: Material: 7075-T6 Aluminium Speed: Single speed (eg. single speed drivetrains and 1x10, 1x11, 1x12-Speed drivetrains) Size: M8 x.75 x 5 Thread Length: 6mm Compatibility: Wolf Tooth's bolt-on Drop-Stop chainrings with unthreaded holes, other brands too Torque: 7-8 NM tightening torque with light grease on threads only Made in the USA Weight: 8gManufacturer's Part Numbers: Black: WT4CBCN06BLK; Blue: WT4CBCN06BLU; Gold: WT4CBCN06GLD; Green: WT4CBCN06GRN; Grey: WT4CBCN06GRY; Orange: WT4CBCN06ORG; Purple: WT4CBCN06PRP; Red: WT4CBCN06RED; Silver: WT4CBCN06SIL; Nickel: WT4CBCN06NIBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth 1X Chainring Bolts and Nuts (Pack of 4)Constructed from tough and hard-wearing 7075-T6 aluminium, this pack 1X Chainring Bolts will hold your mountain bike's (MTB's) chainring securely as you're attacking the most challenging sections of the trails. Made in the USA, they have an M8 size and a 6mm thread length, making them perfect for use with Wolf Tooth’s “Drop Stop” unthreaded chainrings and many other brands too.Features: Material: 7075-T6 Aluminium Speed: Single speed (eg. single speed drivetrains and 1x10, 1x11, 1x12-Speed drivetrains) Size: M8 x.75 x 5 Thread Length: 6mm Compatibility: Wolf Tooth's bolt-on Drop-Stop chainrings with unthreaded holes, other brands too Torque: 7-8 NM tightening torque with light grease on threads only Made in the USA Weight: 8gManufacturer's Part Numbers: Black: WT4CBCN06BLK; Blue: WT4CBCN06BLU; Gold: WT4CBCN06GLD; Green: WT4CBCN06GRN; Grey: WT4CBCN06GRY; Orange: WT4CBCN06ORG; Purple: WT4CBCN06PRP; Red: WT4CBCN06RED; Silver: WT4CBCN06SIL; Nickel: WT4CBCN06NIBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.