Halo Spin Doctor Rear AxleReplacement MTB hollow Type.,CNC Cr-Mo.,135mm O.L.D.,Only fits Halo Spin Doctor..Note: bearings not included
Upgrade your stock bottom bracket. Enduro bottom brackets are designed to spin more efficiently and for longer. The entry standard for Enduro bearings. Enduro's ABEC 3 bearings offer improved quality and performance over ABEC 1 bearings fitted by many OE manufacturers. Only the finest cycling components come standard with Enduro's ABEC 3 bearings. With hardened chromium steel races, balls, and tough riveted steel retainers, these bearings are durable and the perfect low cost performance upgrade.Key Features: Fits BB90 frames - 37mm diameter with a shell width 90.5mm (road) or 95.5mm (mountain) , Suitable for chainsets with 24mm axle , Lightweight, durable Delrin cups , Durable 2437 LLU ABEC 3 Bearings , 49.82g.
Hope Pro 4 Rear Mountain Bike Hub AxleA genuine Hope component to replace or upgrade your Hope Pro 4, Pro 2 Evo, XC6 and XC3 rear hubs, this 135mm axle is easily installed for an efficient and hard-wearing performance. Features: Material: Aluminium Compatibility: Hope Pro 4, Pro 2 Evo, XC6, XC3 HR hubs Weight: 41g Buy Hope Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Hope Pro 4 Rear Boost MTB Hub Axle (148mm)A genuine Hope component, this axle is the perfect spare or replacement to keep you running with Boost-sized brilliance. Features: Axle Size: 12x148mm Boost Buy Hope Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
This thru-axle is designed as a direct replacement for the standard thru-axles found in 15mm RockShox Boost forks as well as most models of 15mm Boost Fox forks. It features a high-quality 7075 aluminium build, which makes it not only lightweight but also very strong and durable on your mountain bike (MTB). This makes it a great choice of upgrade for riders who need to replace their damaged or lost stock axle on their forks.Material: AL7075 AluminiumCNC Precision engineeredHollow for weight saving6mm Hex head at both axle ends for easy fitting & removalColour: BlackSize: 158mm x P1.5 x 10mm (Rockshox Boost), 155mm P1.5 x 13.5mm (Fox Boost)Option: RockShox Boost, Fox BoostThe axle has a washer which helps reduce pressure on the fork legs and transfers some of the tightening torque to the clamping load. This also helps to increase stiffness, while preventing the axle from getting stuck when you want to remove it.All axles are a 6mm hex on the non-drive side and have a backup 6mm hex on the drive-side, allowing the axle to be tightened and loosened from either side of the bike.Always apply a small amount of grease to the axle and threads when installing your axle. Please Note: Not compatible with 2021 Fox 36mm / 38mm forks.
This thru-axle is designed as a direct replacement for the standard thru-axles found in 15mm RockShox Boost forks as well as most models of 15mm Boost Fox forks. It features a high-quality 7075 aluminium build, which makes it not only lightweight but also very strong and durable on your mountain bike (MTB). This makes it a great choice of upgrade for riders who need to replace their damaged or lost stock axle on their forks.Material: AL7075 AluminiumCNC Precision engineeredHollow for weight saving6mm Hex head at both axle ends for easy fitting & removalColour: BlackSize: 158mm x P1.5 x 10mm (Rockshox Boost), 155mm P1.5 x 13.5mm (Fox Boost)Option: RockShox Boost, Fox BoostThe axle has a washer which helps reduce pressure on the fork legs and transfers some of the tightening torque to the clamping load. This also helps to increase stiffness, while preventing the axle from getting stuck when you want to remove it.All axles are a 6mm hex on the non-drive side and have a backup 6mm hex on the drive-side, allowing the axle to be tightened and loosened from either side of the bike.Always apply a small amount of grease to the axle and threads when installing your axle. Please Note: Not compatible with 2021 Fox 36mm / 38mm forks.
This 12mm thru-axle is designed as a direct replacement for riders who want a durable and dependable upgrade for their old standard thru-axle on their mountain bike (MTB). It's equipped with a high-quality 7075 aluminium build, which makes it not only lightweight but also very strong and durable on your mountain bike adventures. This makes it a great choice of upgrade for riders who need to replace a damaged or lost stock axle from their frame.Material: AL7075 AluminiumCNC Precision engineeredHollow for weight savingNon-drive side 6mm Hex head with a backup drive side Hex for easy fitting & removalColour: Black - White, BlackSize: 174mm Axle 16mm Thread, 180mm Axle 20mm Thread, 180mm Axle 13mm Thread, 164mm Axle 13mm Thread, 181mm Axle 20mm Thread, 174mm Axle 20mm Thread, 175mm Axle 12mm Thread, 170mm Axle 13mm ThreadOption: P 1.0, P 1.75, P 1.5The axle has a washer which helps to reduce pressure on the frame dropouts and transfers some of the tightening torque to the clamping load. This also helps to increase stiffness and prevent the axle from getting stuck when you want to remove it.Nukeproof have created a printable guide that you can use to measure your old axle against and check the exact dimensions to ensure you are selecting the correct axle. It can be downloaded here.All axles are a 6mm hex on the non-drive side and have a backup hex on the drive-side allowing the axle to be tightened and loosened from either side of the bike. Always apply a small amount of grease to the axle and threads when installing your axle.
This 12mm thru-axle is designed as a direct replacement for riders who want a durable and dependable upgrade for their old standard thru-axle on their mountain bike (MTB). It's equipped with a high-quality 7075 aluminium build, which makes it not only lightweight but also very strong and durable on your mountain bike adventures. This makes it a great choice of upgrade for riders who need to replace a damaged or lost stock axle from their frame.Material: AL7075 AluminiumCNC Precision engineeredHollow for weight savingNon-drive side 6mm Hex head with a backup drive side Hex for easy fitting & removalColour: Black - White, BlackSize: 174mm Axle 16mm Thread, 180mm Axle 20mm Thread, 180mm Axle 13mm Thread, 164mm Axle 13mm Thread, 181mm Axle 20mm Thread, 174mm Axle 20mm Thread, 175mm Axle 12mm Thread, 170mm Axle 13mm ThreadOption: P 1.0, P 1.75, P 1.5The axle has a washer which helps to reduce pressure on the frame dropouts and transfers some of the tightening torque to the clamping load. This also helps to increase stiffness and prevent the axle from getting stuck when you want to remove it.Nukeproof have created a printable guide that you can use to measure your old axle against and check the exact dimensions to ensure you are selecting the correct axle. It can be downloaded here.All axles are a 6mm hex on the non-drive side and have a backup hex on the drive-side allowing the axle to be tightened and loosened from either side of the bike. Always apply a small amount of grease to the axle and threads when installing your axle.
This 12mm thru-axle is designed as a direct replacement for riders who want a durable and dependable upgrade for their old standard thru-axle on their mountain bike (MTB). It's equipped with a high-quality 7075 aluminium build, which makes it not only lightweight but also very strong and durable on your mountain bike adventures. This makes it a great choice of upgrade for riders who need to replace a damaged or lost stock axle from their frame.Material: AL7075 AluminiumCNC Precision engineeredHollow for weight savingNon-drive side 6mm Hex head with a backup drive side Hex for easy fitting & removalColour: Black - White, BlackSize: 174mm Axle 16mm Thread, 180mm Axle 20mm Thread, 180mm Axle 13mm Thread, 164mm Axle 13mm Thread, 181mm Axle 20mm Thread, 174mm Axle 20mm Thread, 175mm Axle 12mm Thread, 170mm Axle 13mm ThreadOption: P 1.0, P 1.75, P 1.5The axle has a washer which helps to reduce pressure on the frame dropouts and transfers some of the tightening torque to the clamping load. This also helps to increase stiffness and prevent the axle from getting stuck when you want to remove it.Nukeproof have created a printable guide that you can use to measure your old axle against and check the exact dimensions to ensure you are selecting the correct axle. It can be downloaded here.All axles are a 6mm hex on the non-drive side and have a backup hex on the drive-side allowing the axle to be tightened and loosened from either side of the bike. Always apply a small amount of grease to the axle and threads when installing your axle.
This 12mm thru-axle is designed as a direct replacement for riders who want a durable and dependable upgrade for their old standard thru-axle on their mountain bike (MTB). It's equipped with a high-quality 7075 aluminium build, which makes it not only lightweight but also very strong and durable on your mountain bike adventures. This makes it a great choice of upgrade for riders who need to replace a damaged or lost stock axle from their frame.Material: AL7075 AluminiumCNC Precision engineeredHollow for weight savingNon-drive side 6mm Hex head with a backup drive side Hex for easy fitting & removalColour: Black - White, BlackSize: 174mm Axle 16mm Thread, 180mm Axle 20mm Thread, 180mm Axle 13mm Thread, 164mm Axle 13mm Thread, 181mm Axle 20mm Thread, 174mm Axle 20mm Thread, 175mm Axle 12mm Thread, 170mm Axle 13mm ThreadOption: P 1.0, P 1.75, P 1.5The axle has a washer which helps to reduce pressure on the frame dropouts and transfers some of the tightening torque to the clamping load. This also helps to increase stiffness and prevent the axle from getting stuck when you want to remove it.Nukeproof have created a printable guide that you can use to measure your old axle against and check the exact dimensions to ensure you are selecting the correct axle. It can be downloaded here.All axles are a 6mm hex on the non-drive side and have a backup hex on the drive-side allowing the axle to be tightened and loosened from either side of the bike. Always apply a small amount of grease to the axle and threads when installing your axle.
This 12mm thru-axle is designed as a direct replacement for riders who want a durable and dependable upgrade for their old standard thru-axle on their mountain bike (MTB). It's equipped with a high-quality 7075 aluminium build, which makes it not only lightweight but also very strong and durable on your mountain bike adventures. This makes it a great choice of upgrade for riders who need to replace a damaged or lost stock axle from their frame.Material: AL7075 AluminiumCNC Precision engineeredHollow for weight savingNon-drive side 6mm Hex head with a backup drive side Hex for easy fitting & removalColour: Black - White, BlackSize: 174mm Axle 16mm Thread, 180mm Axle 20mm Thread, 180mm Axle 13mm Thread, 164mm Axle 13mm Thread, 181mm Axle 20mm Thread, 174mm Axle 20mm Thread, 175mm Axle 12mm Thread, 170mm Axle 13mm ThreadOption: P 1.0, P 1.75, P 1.5The axle has a washer which helps to reduce pressure on the frame dropouts and transfers some of the tightening torque to the clamping load. This also helps to increase stiffness and prevent the axle from getting stuck when you want to remove it.Nukeproof have created a printable guide that you can use to measure your old axle against and check the exact dimensions to ensure you are selecting the correct axle. It can be downloaded here.All axles are a 6mm hex on the non-drive side and have a backup hex on the drive-side allowing the axle to be tightened and loosened from either side of the bike. Always apply a small amount of grease to the axle and threads when installing your axle.
Nukeproof Thru Axle Rear 12mmThis 12mm thru-axle is designed as a direct replacement for riders who want a durable and dependable upgrade for their old standard thru-axle on their mountain bike (MTB). It's equipped with a high-quality 7075 aluminium build, which makes it not only lightweight but also very strong and durable on your mountain bike adventures. This makes it a great choice of upgrade for riders who need to replace a damaged or lost stock axle from their frame.The axle has a washer which helps to reduce pressure on the frame dropouts and transfers some of the tightening torque to the clamping load. This also helps to increase stiffness and prevent the axle from getting stuck when you want to remove it.Nukeproof have created a printable guide that you can use to measure your old axle against and check the exact dimensions to ensure you are selecting the correct axle. It can be downloaded hereAll axles are a 6mm hex on the non-drive side and have a backup hex on the drive-side allowing the axle to be tightened and loosened from either side of the bike.Always apply a small amount of grease to the axle and threads when installing your axle. Diameter Axle Length Thread Pitch Thread Pitch Rear 12mm 164mm 1.5 13mm Rear 12mm 170mm 1.5 13mm Rear 12mm 174mm 1.75 20mm Rear 12mm 175mm 1.5 12mm Rear 12mm 180mm 1.75 20mm Rear 12mm 180mm 1 13mm Rear 12mm 181mm 1.5 20mm Features: Material: AL7075 Aluminium CNC Precision engineered Hollow for weight saving Non-driveside 6mm Hex head with a backup driveside Hex for easy fitting & removalBuy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.