Nukeproof Thru Axle Rear 12mmThis 12mm thru-axle is designed as a direct replacement for riders who want a durable and dependable upgrade for their old standard thru-axle on their mountain bike (MTB). It's equipped with a high-quality 7075 aluminium build, which makes it not only lightweight but also very strong and durable on your mountain bike adventures. This makes it a great choice of upgrade for riders who need to replace a damaged or lost stock axle from their frame.The axle has a washer which helps to reduce pressure on the frame dropouts and transfers some of the tightening torque to the clamping load. This also helps to increase stiffness and prevent the axle from getting stuck when you want to remove it.Nukeproof have created a printable guide that you can use to measure your old axle against and check the exact dimensions to ensure you are selecting the correct axle. It can be downloaded hereAll axles are a 6mm hex on the non-drive side and have a backup hex on the drive-side allowing the axle to be tightened and loosened from either side of the bike.Always apply a small amount of grease to the axle and threads when installing your axle. Diameter Axle Length Thread Pitch Thread Pitch Rear 12mm 164mm 1.5 13mm Rear 12mm 170mm 1.5 13mm Rear 12mm 174mm 1.75 20mm Rear 12mm 175mm 1.5 12mm Rear 12mm 180mm 1.75 20mm Rear 12mm 180mm 1 13mm Rear 12mm 181mm 1.5 20mm Features: Material: AL7075 Aluminium CNC Precision engineered Hollow for weight saving Non-driveside 6mm Hex head with a backup driveside Hex for easy fitting & removalBuy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
This Park Tool AV1C Axle Vice tool holds the axle so it will not turn while work is done on the hub. It has two different diameter receptacles so it will work on front and rear axles. It is simple to use - just insert the axle into the proper diameter opening and tighten the bench vice. The jaws will open automatically when the vice is opened.
Nukeproof Thru Axle Rear 12mmThis 12mm thru-axle is designed as a direct replacement for riders who want a durable and dependable upgrade for their old standard thru-axle on their mountain bike (MTB). It's equipped with a high-quality 7075 aluminium build, which makes it not only lightweight but also very strong and durable on your mountain bike adventures. This makes it a great choice of upgrade for riders who need to replace a damaged or lost stock axle from their frame.The axle has a washer which helps to reduce pressure on the frame dropouts and transfers some of the tightening torque to the clamping load. This also helps to increase stiffness and prevent the axle from getting stuck when you want to remove it.Nukeproof have created a printable guide that you can use to measure your old axle against and check the exact dimensions to ensure you are selecting the correct axle. It can be downloaded hereAll axles are a 6mm hex on the non-drive side and have a backup hex on the drive-side allowing the axle to be tightened and loosened from either side of the bike.Always apply a small amount of grease to the axle and threads when installing your axle. Diameter Axle Length Thread Pitch Thread Pitch Rear 12mm 164mm 1.5 13mm Rear 12mm 170mm 1.5 13mm Rear 12mm 174mm 1.75 20mm Rear 12mm 175mm 1.5 12mm Rear 12mm 180mm 1.75 20mm Rear 12mm 180mm 1 13mm Rear 12mm 181mm 1.5 20mm Features: Material: AL7075 Aluminium CNC Precision engineered Hollow for weight saving Non-driveside 6mm Hex head with a backup driveside Hex for easy fitting & removalBuy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Brand-X Twist Lever Thru AxleThe Brand-X Twist Lever Thru Axle is made from durable aluminium to ensure it is hard-wearing and ready for whatever challenges you meet on the trails. These Thru Axles from Brand-X are available at a price that won't break the bank and make an ideal alternative to your fork or frame's original.Optimised Lever DesignUnlike the common/standard bolt-thru axle, the Brand-X version has an easy to use, solid twist lever. There's no need to twist and back off to get a clamping mechanism working, simply twist the lever until your wheel is solidly locked in place. The lever sits on splines and can engage/disengaged to set the lever in your desired position once tightened in place. Available in a range of sizes, Brand-X has produced these twist lever thru-axles in the most commonly seen lengths and thread pitches.Note: It is recommended to precisely measure the dimensions of your existing thru-axle before ordering, see the dimension table below.Features: Material: AL7075 Aluminium CNC Precision engineered Engage/ disengage twist lever Hollow for weight saving 6mm Allen hey head at the bolt end for 2-way adjustmentSpecifications: Option 1: For solid road/gravel/cyclocross forks that use the Shimano E-Thru 12x100mm axle standard with an M12x1.5 thread pitch. Options 2 and 3: For frames with the 142x12mm axle standard and that use the Shimano E-Thru 12mm axle standard with an M12x1.5 thread pitch. There are two length options as some frames have thicker dropouts. Option 4: For frames with the 142x12mm axle standard and that use the SRAM 12mm thru-axle with the M12x1.75 thread pitch. Option 5: For frames with the “Boost” 148x12mm axle standard and that use the SRAM 12mm thru-axle with the M12x1.75 thread pitch. Option 6: For standard RockShox suspension forks with the 15x100mm axle standard and that use the “Maxle” system with an M15x1.5 thread pitch. Option 7: For the “Boost” version of RockShox suspension forks with the 15x110mm axle standard and that also use the “Maxle” system with an M15x1.5 thread pitch. Option 8: For Fox Suspension forks with the standard 15x100mm axle standard that use the “Kabolt” system with an M14x1.5 thread pitch.Dimensions: Option Type Hub Size Length Thread Length Thread Pitch Weight 1 E-Thru 12x100mm 125mm 17mm M12x1.5 60g 2 E-Thru 12x142mm 166mm 17mm M12x1.5 73g 3 E-Thru 12x142mm 170mm 17mm M12x1.5 75g 4 SRAM 12x142mm 172mm 20mm M12x1.75 70g 5 SRAM 12x148mm 180mm 20mm M12x1.75 78g 6 RockShox 15x100mm 146mm 11mm M15x1.5 92g 7 RockShox 15x110mm 158mm 11mm M15x1.5 98g 8 Fox Kabolt 15x100mm 146mm 13mm M14x1.5 91g 9 Fox Kabolt 15x110mm 156mm 13mm M14x1.5 96g Buy Brand-X Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
This DT Swiss RWS rear thru-axle optimises the DT Swiss wheel/hub to frame system. Unique to DT Swiss, this boost-compatible mountain bike (MTB) axle mounting system is stiffer, safer and easier to use than most other options available on the market.
Brand-X Twist Lever Thru AxleThe Brand-X Twist Lever Thru Axle is made from durable aluminium to ensure it is hard-wearing and ready for whatever challenges you meet on the trails. These Thru Axles from Brand-X are available at a price that won't break the bank and make an ideal alternative to your fork or frame's original.Optimised Lever DesignUnlike the common/standard bolt-thru axle, the Brand-X version has an easy to use, solid twist lever. There's no need to twist and back off to get a clamping mechanism working, simply twist the lever until your wheel is solidly locked in place. The lever sits on splines and can engage/disengaged to set the lever in your desired position once tightened in place. Available in a range of sizes, Brand-X has produced these twist lever thru-axles in the most commonly seen lengths and thread pitches.Note: It is recommended to precisely measure the dimensions of your existing thru-axle before ordering, see the dimension table below.Features: Material: AL7075 Aluminium CNC Precision engineered Engage/ disengage twist lever Hollow for weight saving 6mm Allen hey head at the bolt end for 2-way adjustmentSpecifications: Option 1: For solid road/gravel/cyclocross forks that use the Shimano E-Thru 12x100mm axle standard with an M12x1.5 thread pitch. Options 2 and 3: For frames with the 142x12mm axle standard and that use the Shimano E-Thru 12mm axle standard with an M12x1.5 thread pitch. There are two length options as some frames have thicker dropouts. Option 4: For frames with the 142x12mm axle standard and that use the SRAM 12mm thru-axle with the M12x1.75 thread pitch. Option 5: For frames with the “Boost” 148x12mm axle standard and that use the SRAM 12mm thru-axle with the M12x1.75 thread pitch. Option 6: For standard RockShox suspension forks with the 15x100mm axle standard and that use the “Maxle” system with an M15x1.5 thread pitch. Option 7: For the “Boost” version of RockShox suspension forks with the 15x110mm axle standard and that also use the “Maxle” system with an M15x1.5 thread pitch. Option 8: For Fox Suspension forks with the standard 15x100mm axle standard that use the “Kabolt” system with an M14x1.5 thread pitch.Dimensions: Option Type Hub Size Length Thread Length Thread Pitch Weight 1 E-Thru 12x100mm 125mm 17mm M12x1.5 60g 2 E-Thru 12x142mm 166mm 17mm M12x1.5 73g 3 E-Thru 12x142mm 170mm 17mm M12x1.5 75g 4 SRAM 12x142mm 172mm 20mm M12x1.75 70g 5 SRAM 12x148mm 180mm 20mm M12x1.75 78g 6 RockShox 15x100mm 146mm 11mm M15x1.5 92g 7 RockShox 15x110mm 158mm 11mm M15x1.5 98g 8 Fox Kabolt 15x100mm 146mm 13mm M14x1.5 91g 9 Fox Kabolt 15x110mm 156mm 13mm M14x1.5 96g Buy Brand-X Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Brand-X Twist Lever Thru AxleThe Brand-X Twist Lever Thru Axle is made from durable aluminium to ensure it is hard-wearing and ready for whatever challenges you meet on the trails. These Thru Axles from Brand-X are available at a price that won't break the bank and make an ideal alternative to your fork or frame's original.Optimised Lever DesignUnlike the common/standard bolt-thru axle, the Brand-X version has an easy to use, solid twist lever. There's no need to twist and back off to get a clamping mechanism working, simply twist the lever until your wheel is solidly locked in place. The lever sits on splines and can engage/disengaged to set the lever in your desired position once tightened in place. Available in a range of sizes, Brand-X has produced these twist lever thru-axles in the most commonly seen lengths and thread pitches.Note: It is recommended to precisely measure the dimensions of your existing thru-axle before ordering, see the dimension table below.Features: Material: AL7075 Aluminium CNC Precision engineered Engage/ disengage twist lever Hollow for weight saving 6mm Allen hey head at the bolt end for 2-way adjustmentSpecifications: Option 1: For solid road/gravel/cyclocross forks that use the Shimano E-Thru 12x100mm axle standard with an M12x1.5 thread pitch. Options 2 and 3: For frames with the 142x12mm axle standard and that use the Shimano E-Thru 12mm axle standard with an M12x1.5 thread pitch. There are two length options as some frames have thicker dropouts. Option 4: For frames with the 142x12mm axle standard and that use the SRAM 12mm thru-axle with the M12x1.75 thread pitch. Option 5: For frames with the “Boost” 148x12mm axle standard and that use the SRAM 12mm thru-axle with the M12x1.75 thread pitch. Option 6: For standard RockShox suspension forks with the 15x100mm axle standard and that use the “Maxle” system with an M15x1.5 thread pitch. Option 7: For the “Boost” version of RockShox suspension forks with the 15x110mm axle standard and that also use the “Maxle” system with an M15x1.5 thread pitch. Option 8: For Fox Suspension forks with the standard 15x100mm axle standard that use the “Kabolt” system with an M14x1.5 thread pitch.Dimensions: Option Type Hub Size Length Thread Length Thread Pitch Weight 1 E-Thru 12x100mm 125mm 17mm M12x1.5 60g 2 E-Thru 12x142mm 166mm 17mm M12x1.5 73g 3 E-Thru 12x142mm 170mm 17mm M12x1.5 75g 4 SRAM 12x142mm 172mm 20mm M12x1.75 70g 5 SRAM 12x148mm 180mm 20mm M12x1.75 78g 6 RockShox 15x100mm 146mm 11mm M15x1.5 92g 7 RockShox 15x110mm 158mm 11mm M15x1.5 98g 8 Fox Kabolt 15x100mm 146mm 13mm M14x1.5 91g 9 Fox Kabolt 15x110mm 156mm 13mm M14x1.5 96g Buy Brand-X Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Brand-X Twist Lever Thru AxleThe Brand-X Twist Lever Thru Axle is made from durable aluminium to ensure it is hard-wearing and ready for whatever challenges you meet on the trails. These Thru Axles from Brand-X are available at a price that won't break the bank and make an ideal alternative to your fork or frame's original.Optimised Lever DesignUnlike the common/standard bolt-thru axle, the Brand-X version has an easy to use, solid twist lever. There's no need to twist and back off to get a clamping mechanism working, simply twist the lever until your wheel is solidly locked in place. The lever sits on splines and can engage/disengaged to set the lever in your desired position once tightened in place. Available in a range of sizes, Brand-X has produced these twist lever thru-axles in the most commonly seen lengths and thread pitches.Note: It is recommended to precisely measure the dimensions of your existing thru-axle before ordering, see the dimension table below.Features: Material: AL7075 Aluminium CNC Precision engineered Engage/ disengage twist lever Hollow for weight saving 6mm Allen hey head at the bolt end for 2-way adjustmentSpecifications: Option 1: For solid road/gravel/cyclocross forks that use the Shimano E-Thru 12x100mm axle standard with an M12x1.5 thread pitch. Options 2 and 3: For frames with the 142x12mm axle standard and that use the Shimano E-Thru 12mm axle standard with an M12x1.5 thread pitch. There are two length options as some frames have thicker dropouts. Option 4: For frames with the 142x12mm axle standard and that use the SRAM 12mm thru-axle with the M12x1.75 thread pitch. Option 5: For frames with the “Boost” 148x12mm axle standard and that use the SRAM 12mm thru-axle with the M12x1.75 thread pitch. Option 6: For standard RockShox suspension forks with the 15x100mm axle standard and that use the “Maxle” system with an M15x1.5 thread pitch. Option 7: For the “Boost” version of RockShox suspension forks with the 15x110mm axle standard and that also use the “Maxle” system with an M15x1.5 thread pitch. Option 8: For Fox Suspension forks with the standard 15x100mm axle standard that use the “Kabolt” system with an M14x1.5 thread pitch.Dimensions: Option Type Hub Size Length Thread Length Thread Pitch Weight 1 E-Thru 12x100mm 125mm 17mm M12x1.5 60g 2 E-Thru 12x142mm 166mm 17mm M12x1.5 73g 3 E-Thru 12x142mm 170mm 17mm M12x1.5 75g 4 SRAM 12x142mm 172mm 20mm M12x1.75 70g 5 SRAM 12x148mm 180mm 20mm M12x1.75 78g 6 RockShox 15x100mm 146mm 11mm M15x1.5 92g 7 RockShox 15x110mm 158mm 11mm M15x1.5 98g 8 Fox Kabolt 15x100mm 146mm 13mm M14x1.5 91g 9 Fox Kabolt 15x110mm 156mm 13mm M14x1.5 96g Buy Brand-X Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Brand-X Twist Lever Thru AxleThe Brand-X Twist Lever Thru Axle is made from durable aluminium to ensure it is hard-wearing and ready for whatever challenges you meet on the trails. These Thru Axles from Brand-X are available at a price that won't break the bank and make an ideal alternative to your fork or frame's original.Optimised Lever DesignUnlike the common/standard bolt-thru axle, the Brand-X version has an easy to use, solid twist lever. There's no need to twist and back off to get a clamping mechanism working, simply twist the lever until your wheel is solidly locked in place. The lever sits on splines and can engage/disengaged to set the lever in your desired position once tightened in place. Available in a range of sizes, Brand-X has produced these twist lever thru-axles in the most commonly seen lengths and thread pitches.Note: It is recommended to precisely measure the dimensions of your existing thru-axle before ordering, see the dimension table below.Features: Material: AL7075 Aluminium CNC Precision engineered Engage/ disengage twist lever Hollow for weight saving 6mm Allen hey head at the bolt end for 2-way adjustmentSpecifications: Option 1: For solid road/gravel/cyclocross forks that use the Shimano E-Thru 12x100mm axle standard with an M12x1.5 thread pitch. Options 2 and 3: For frames with the 142x12mm axle standard and that use the Shimano E-Thru 12mm axle standard with an M12x1.5 thread pitch. There are two length options as some frames have thicker dropouts. Option 4: For frames with the 142x12mm axle standard and that use the SRAM 12mm thru-axle with the M12x1.75 thread pitch. Option 5: For frames with the “Boost” 148x12mm axle standard and that use the SRAM 12mm thru-axle with the M12x1.75 thread pitch. Option 6: For standard RockShox suspension forks with the 15x100mm axle standard and that use the “Maxle” system with an M15x1.5 thread pitch. Option 7: For the “Boost” version of RockShox suspension forks with the 15x110mm axle standard and that also use the “Maxle” system with an M15x1.5 thread pitch. Option 8: For Fox Suspension forks with the standard 15x100mm axle standard that use the “Kabolt” system with an M14x1.5 thread pitch.Dimensions: Option Type Hub Size Length Thread Length Thread Pitch Weight 1 E-Thru 12x100mm 125mm 17mm M12x1.5 60g 2 E-Thru 12x142mm 166mm 17mm M12x1.5 73g 3 E-Thru 12x142mm 170mm 17mm M12x1.5 75g 4 SRAM 12x142mm 172mm 20mm M12x1.75 70g 5 SRAM 12x148mm 180mm 20mm M12x1.75 78g 6 RockShox 15x100mm 146mm 11mm M15x1.5 92g 7 RockShox 15x110mm 158mm 11mm M15x1.5 98g 8 Fox Kabolt 15x100mm 146mm 13mm M14x1.5 91g 9 Fox Kabolt 15x110mm 156mm 13mm M14x1.5 96g Buy Brand-X Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Brand-X Twist Lever Thru AxleThe Brand-X Twist Lever Thru Axle is made from durable aluminium to ensure it is hard-wearing and ready for whatever challenges you meet on the trails. These Thru Axles from Brand-X are available at a price that won't break the bank and make an ideal alternative to your fork or frame's original.Optimised Lever DesignUnlike the common/standard bolt-thru axle, the Brand-X version has an easy to use, solid twist lever. There's no need to twist and back off to get a clamping mechanism working, simply twist the lever until your wheel is solidly locked in place. The lever sits on splines and can engage/disengaged to set the lever in your desired position once tightened in place. Available in a range of sizes, Brand-X has produced these twist lever thru-axles in the most commonly seen lengths and thread pitches.Note: It is recommended to precisely measure the dimensions of your existing thru-axle before ordering, see the dimension table below.Features: Material: AL7075 Aluminium CNC Precision engineered Engage/ disengage twist lever Hollow for weight saving 6mm Allen hey head at the bolt end for 2-way adjustmentSpecifications: Option 1: For solid road/gravel/cyclocross forks that use the Shimano E-Thru 12x100mm axle standard with an M12x1.5 thread pitch. Options 2 and 3: For frames with the 142x12mm axle standard and that use the Shimano E-Thru 12mm axle standard with an M12x1.5 thread pitch. There are two length options as some frames have thicker dropouts. Option 4: For frames with the 142x12mm axle standard and that use the SRAM 12mm thru-axle with the M12x1.75 thread pitch. Option 5: For frames with the “Boost” 148x12mm axle standard and that use the SRAM 12mm thru-axle with the M12x1.75 thread pitch. Option 6: For standard RockShox suspension forks with the 15x100mm axle standard and that use the “Maxle” system with an M15x1.5 thread pitch. Option 7: For the “Boost” version of RockShox suspension forks with the 15x110mm axle standard and that also use the “Maxle” system with an M15x1.5 thread pitch. Option 8: For Fox Suspension forks with the standard 15x100mm axle standard that use the “Kabolt” system with an M14x1.5 thread pitch.Dimensions: Option Type Hub Size Length Thread Length Thread Pitch Weight 1 E-Thru 12x100mm 125mm 17mm M12x1.5 60g 2 E-Thru 12x142mm 166mm 17mm M12x1.5 73g 3 E-Thru 12x142mm 170mm 17mm M12x1.5 75g 4 SRAM 12x142mm 172mm 20mm M12x1.75 70g 5 SRAM 12x148mm 180mm 20mm M12x1.75 78g 6 RockShox 15x100mm 146mm 11mm M15x1.5 92g 7 RockShox 15x110mm 158mm 11mm M15x1.5 98g 8 Fox Kabolt 15x100mm 146mm 13mm M14x1.5 91g 9 Fox Kabolt 15x110mm 156mm 13mm M14x1.5 96g Buy Brand-X Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Brand-X Twist Lever Thru AxleThe Brand-X Twist Lever Thru Axle is made from durable aluminium to ensure it is hard-wearing and ready for whatever challenges you meet on the trails. These Thru Axles from Brand-X are available at a price that won't break the bank and make an ideal alternative to your fork or frame's original.Optimised Lever DesignUnlike the common/standard bolt-thru axle, the Brand-X version has an easy to use, solid twist lever. There's no need to twist and back off to get a clamping mechanism working, simply twist the lever until your wheel is solidly locked in place. The lever sits on splines and can engage/disengaged to set the lever in your desired position once tightened in place. Available in a range of sizes, Brand-X has produced these twist lever thru-axles in the most commonly seen lengths and thread pitches.Note: It is recommended to precisely measure the dimensions of your existing thru-axle before ordering, see the dimension table below.Features: Material: AL7075 Aluminium CNC Precision engineered Engage/ disengage twist lever Hollow for weight saving 6mm Allen hey head at the bolt end for 2-way adjustmentSpecifications: Option 1: For solid road/gravel/cyclocross forks that use the Shimano E-Thru 12x100mm axle standard with an M12x1.5 thread pitch. Options 2 and 3: For frames with the 142x12mm axle standard and that use the Shimano E-Thru 12mm axle standard with an M12x1.5 thread pitch. There are two length options as some frames have thicker dropouts. Option 4: For frames with the 142x12mm axle standard and that use the SRAM 12mm thru-axle with the M12x1.75 thread pitch. Option 5: For frames with the “Boost” 148x12mm axle standard and that use the SRAM 12mm thru-axle with the M12x1.75 thread pitch. Option 6: For standard RockShox suspension forks with the 15x100mm axle standard and that use the “Maxle” system with an M15x1.5 thread pitch. Option 7: For the “Boost” version of RockShox suspension forks with the 15x110mm axle standard and that also use the “Maxle” system with an M15x1.5 thread pitch. Option 8: For Fox Suspension forks with the standard 15x100mm axle standard that use the “Kabolt” system with an M14x1.5 thread pitch.Dimensions: Option Type Hub Size Length Thread Length Thread Pitch Weight 1 E-Thru 12x100mm 125mm 17mm M12x1.5 60g 2 E-Thru 12x142mm 166mm 17mm M12x1.5 73g 3 E-Thru 12x142mm 170mm 17mm M12x1.5 75g 4 SRAM 12x142mm 172mm 20mm M12x1.75 70g 5 SRAM 12x148mm 180mm 20mm M12x1.75 78g 6 RockShox 15x100mm 146mm 11mm M15x1.5 92g 7 RockShox 15x110mm 158mm 11mm M15x1.5 98g 8 Fox Kabolt 15x100mm 146mm 13mm M14x1.5 91g 9 Fox Kabolt 15x110mm 156mm 13mm M14x1.5 96g Buy Brand-X Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Brand-X Twist Lever Thru AxleThe Brand-X Twist Lever Thru Axle is made from durable aluminium to ensure it is hard-wearing and ready for whatever challenges you meet on the trails. These Thru Axles from Brand-X are available at a price that won't break the bank and make an ideal alternative to your fork or frame's original.Optimised Lever DesignUnlike the common/standard bolt-thru axle, the Brand-X version has an easy to use, solid twist lever. There's no need to twist and back off to get a clamping mechanism working, simply twist the lever until your wheel is solidly locked in place. The lever sits on splines and can engage/disengaged to set the lever in your desired position once tightened in place. Available in a range of sizes, Brand-X has produced these twist lever thru-axles in the most commonly seen lengths and thread pitches.Note: It is recommended to precisely measure the dimensions of your existing thru-axle before ordering, see the dimension table below.Features: Material: AL7075 Aluminium CNC Precision engineered Engage/ disengage twist lever Hollow for weight saving 6mm Allen hey head at the bolt end for 2-way adjustmentSpecifications: Option 1: For solid road/gravel/cyclocross forks that use the Shimano E-Thru 12x100mm axle standard with an M12x1.5 thread pitch. Options 2 and 3: For frames with the 142x12mm axle standard and that use the Shimano E-Thru 12mm axle standard with an M12x1.5 thread pitch. There are two length options as some frames have thicker dropouts. Option 4: For frames with the 142x12mm axle standard and that use the SRAM 12mm thru-axle with the M12x1.75 thread pitch. Option 5: For frames with the “Boost” 148x12mm axle standard and that use the SRAM 12mm thru-axle with the M12x1.75 thread pitch. Option 6: For standard RockShox suspension forks with the 15x100mm axle standard and that use the “Maxle” system with an M15x1.5 thread pitch. Option 7: For the “Boost” version of RockShox suspension forks with the 15x110mm axle standard and that also use the “Maxle” system with an M15x1.5 thread pitch. Option 8: For Fox Suspension forks with the standard 15x100mm axle standard that use the “Kabolt” system with an M14x1.5 thread pitch.Dimensions: Option Type Hub Size Length Thread Length Thread Pitch Weight 1 E-Thru 12x100mm 125mm 17mm M12x1.5 60g 2 E-Thru 12x142mm 166mm 17mm M12x1.5 73g 3 E-Thru 12x142mm 170mm 17mm M12x1.5 75g 4 SRAM 12x142mm 172mm 20mm M12x1.75 70g 5 SRAM 12x148mm 180mm 20mm M12x1.75 78g 6 RockShox 15x100mm 146mm 11mm M15x1.5 92g 7 RockShox 15x110mm 158mm 11mm M15x1.5 98g 8 Fox Kabolt 15x100mm 146mm 13mm M14x1.5 91g 9 Fox Kabolt 15x110mm 156mm 13mm M14x1.5 96g Buy Brand-X Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.