Nukeproof Reactor 290 Alloy Frame - GreyBoasting a rock-solid 6061 aluminium build, this trail-ready mountain bike (MTB) frame is engineered to endure the most demanding of terrain conditions. Thanks to its hydroforming and triple-butting process, it offers extra durability as you charge from trail to trail. Keeping your ride smooth, its RockShox Super Deluxe Ultimate RCT rear shock also gives you increased tuneability and control for superior rear end suspension performance. This makes it perfect for blasting across rock gardens, tree roots and whatever the trail has to throw at you. Coming complete with updated geometry, internal cable routing and 148x12mm rear hub spacing, this full-suspension MTB frame is fully equipped for the demands of modern trail riding.From concept through to design, the Kinematics, the geometry and specification; the Reactor is designed from the ground up to be the ultimate aggressive trail bike. It is at home on technical climbs, but happiest when thrashing the most technical trails you can point it at.Full Suspension Alloy MTB FrameThe Alloy Reactor features a custom triple butted hydro-formed tube set and carbon seat stays, which help reduce the overall weight of the frameset. Critically this reduces the unsprung weight; making the suspension as active as possible.The Reactor is available for 27.5” or 29” wheel sizes. These are two totally different, compromise free frames that were designed and developed at the same time. Each frame is simply tailored around each wheel size.Speed or play: which do you value more? The manoeuvrability of 27.5” or the raw speed of a 29”?Adjustable GeometryAll Reactor frames feature a “flip chip” to adjust the geometry from “Trail” to “Rail mode”.Trail - As the name suggests, this setting is best suited for trail riding. It is for riders who get as much enjoyment from the climb as the descents.Rail - The Rail setting turns the Reactor into a corner shredder, dropping the bottom bracket 6mm and slackening the head angle by half a degree. It is there to maximise the descending capabilities.Suspension DesignTo ensure the bike could climb as well as it descends, we designed the four bar horst linkage to have higher levels of anti-squat for climbing gears but lower levels when you drop down the cassette. This means that the bike can behave itself on the climbs but when you get it up to speed, it turns into a trail hooligan. The combination of low anti-squat and progressive rate give ultimate small bump compliance (removes rough trail and root chatter) with good mid stroke support for cornering/pumping and end stroke progression for aggressive riding. Balanced anti-rise figures allow the Reactor some squat when braking hard, maintaining rider position and providing a good amount of pressure through the tyre to ensure traction. The Reactor is designed to reward the rider and ensure you get that stoke factor in on any ride.Features: Material: Nukeproof Reactor 290 Alloy, 130mm Travel, custom triple butted hydro-formed tube set for front triangle and chain stays, UD woven Carbon Fibre seat stays Use: Mountain Bike (MTB) frame Shock: RockShox Super Deluxe Ultimate RCT, Custom ML 320 tune, 210x50mm, Bearing End, 1x bottomless token fitted Fork Travel: 150mm Axle to Crown: 564mm Fork Offset: 44mm Rear Travel: 130mm Wheels Size: 29" Max Tyre Size: 2.6" Recommended Shock Sag (Measured seated): 30% Shock Size: 210x50mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Sizing Options: M/L/XL Headtube: 44-56mm Tapered Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 Bearings Required: 2x (6902 2RS), 4x (6800 2RS), 4x (6901 2RS) Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 34.9mm Bottom Bracket: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: SRAM Maxle Stealth M12x1.75 180mm (Thread Length 20mm) Chain Guide: ISCG05 Brake Mount: 180mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Cable Routing: Internal cable routing ISCG05 mount Enduro bearings Weight: 3.72Kgs/8.2lbs (Medium option)Buy Nukeproof Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Reactor 290 Alloy Frame - GreyBoasting a rock-solid 6061 aluminium build, this trail-ready mountain bike (MTB) frame is engineered to endure the most demanding of terrain conditions. Thanks to its hydroforming and triple-butting process, it offers extra durability as you charge from trail to trail. Keeping your ride smooth, its RockShox Super Deluxe Ultimate RCT rear shock also gives you increased tuneability and control for superior rear end suspension performance. This makes it perfect for blasting across rock gardens, tree roots and whatever the trail has to throw at you. Coming complete with updated geometry, internal cable routing and 148x12mm rear hub spacing, this full-suspension MTB frame is fully equipped for the demands of modern trail riding.From concept through to design, the Kinematics, the geometry and specification; the Reactor is designed from the ground up to be the ultimate aggressive trail bike. It is at home on technical climbs, but happiest when thrashing the most technical trails you can point it at.Full Suspension Alloy MTB FrameThe Alloy Reactor features a custom triple butted hydro-formed tube set and carbon seat stays, which help reduce the overall weight of the frameset. Critically this reduces the unsprung weight; making the suspension as active as possible.The Reactor is available for 27.5” or 29” wheel sizes. These are two totally different, compromise free frames that were designed and developed at the same time. Each frame is simply tailored around each wheel size.Speed or play: which do you value more? The manoeuvrability of 27.5” or the raw speed of a 29”?Adjustable GeometryAll Reactor frames feature a “flip chip” to adjust the geometry from “Trail” to “Rail mode”.Trail - As the name suggests, this setting is best suited for trail riding. It is for riders who get as much enjoyment from the climb as the descents.Rail - The Rail setting turns the Reactor into a corner shredder, dropping the bottom bracket 6mm and slackening the head angle by half a degree. It is there to maximise the descending capabilities.Suspension DesignTo ensure the bike could climb as well as it descends, we designed the four bar horst linkage to have higher levels of anti-squat for climbing gears but lower levels when you drop down the cassette. This means that the bike can behave itself on the climbs but when you get it up to speed, it turns into a trail hooligan. The combination of low anti-squat and progressive rate give ultimate small bump compliance (removes rough trail and root chatter) with good mid stroke support for cornering/pumping and end stroke progression for aggressive riding. Balanced anti-rise figures allow the Reactor some squat when braking hard, maintaining rider position and providing a good amount of pressure through the tyre to ensure traction. The Reactor is designed to reward the rider and ensure you get that stoke factor in on any ride.Features: Material: Nukeproof Reactor 290 Alloy, 130mm Travel, custom triple butted hydro-formed tube set for front triangle and chain stays, UD woven Carbon Fibre seat stays Use: Mountain Bike (MTB) frame Shock: RockShox Super Deluxe Ultimate RCT, Custom ML 320 tune, 210x50mm, Bearing End, 1x bottomless token fitted Fork Travel: 150mm Axle to Crown: 564mm Fork Offset: 44mm Rear Travel: 130mm Wheels Size: 29" Max Tyre Size: 2.6" Recommended Shock Sag (Measured seated): 30% Shock Size: 210x50mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Sizing Options: M/L/XL Headtube: 44-56mm Tapered Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 Bearings Required: 2x (6902 2RS), 4x (6800 2RS), 4x (6901 2RS) Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 34.9mm Bottom Bracket: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: SRAM Maxle Stealth M12x1.75 180mm (Thread Length 20mm) Chain Guide: ISCG05 Brake Mount: 180mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Cable Routing: Internal cable routing ISCG05 mount Enduro bearings Weight: 3.72Kgs/8.2lbs (Medium option)Buy Nukeproof Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
Whether you're shredding your favourite local trails with your riding buddies or attacking some technical routes on your own, this full suspension mountain bike (MTB) frame is engineered for performance. It features a robust 6061 aluminium frame construction that's been put through a hydroforming and triple-butting process to ensure maximum strength and durability as you conquer your way around the mountain. Nukeproof has also equipped this model with a dependable RockShox Super Deluxe Ultimate RCT rear shock for smooth and consistent rear end suspension performance, whatever the trail conditions. Coming complete with 148x12mm Boost rear hub spacing and internal cable routing, this is an ideal choice of upgrade for handling the demands modern MTB trail riding. From concept through to design, the Kinematics, the geometry and specification; the Reactor is designed from the ground up to be the ultimate aggressive trail bike. It is at home on technical climbs, but happiest when thrashing the most technical trails you can point it at. Triple-Butted Alloy MTB Frame The Alloy Reactor features a custom triple butted hydro-formed tube set and carbon seat stays, which help reduce the overall weight of the frameset. Critically this reduces the unsprung weight; making the suspension as active as possible. The Reactor is available for 27.5” or 29” wheel sizes. These are two totally different, compromise-free frames that were designed and developed at the same time. Each frame is simply tailored around each wheel size. Speed or play: which do you value more? The manoeuvrability of 27.5” or the raw speed of a 29”? Adjustable Geometry All Reactor frames feature a “flip chip” to adjust the geometry from “Trail” to “Rail mode”. Trail – As the name suggests, this setting is best suited for trail riding. It is for riders who get as much enjoyment from the climb as the descents. Rail - The Rail setting turns the Reactor into a corner shredder, dropping the bottom bracket 6mm and slackening the head angle by half a degree. It is there to maximise the descending capabilities. Suspension Design To ensure the bike could climb as well as it descends, Nukeproof designed the four bar horst linkage to have higher levels of anti-squat for climbing gears but lower levels when you drop down the cassette. This means that the bike can behave itself on the climbs but when you get it up to speed, it turns into a trail hooligan. The combination of low anti-squat and progressive rate give ultimate small bump compliance (removes rough trail and root chatter) with good mid stroke support for cornering/pumping and end stroke progression for aggressive riding. Balanced anti-rise figures allow the Reactor some squat when braking hard, maintaining rider position and providing a good amount of pressure through the tyre to ensure traction. The Reactor is designed to reward the rider and ensure you get that stoke factor in on any ride. Features: Material: Hydroformed 6061 Triple-Butted Aluminium Fork Travel: 160mm (Comp 150mm) Axle to Crown: 555mm (Comp 545mm) Fork Offset: 46mm Rear Travel: 140mm Wheels Size: 27.5" Max Tyre Size: 2.6" Recommended Shock Sag (Measured seated): 30% Shock Size: 210x55mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Sizing Options: S/M/L/XL Headtube: 44-56mm Tapered Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 Bearings Required: 2x (6902 2RS), 4x (6800 2RS), 4x (6901 2RS) Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 34.9mm Bottom Bracket: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: SRAM Maxle Stealth M12x1.75 180mm (Thread Length 20mm) Chain Guide: ISCG05 Brake Mount: 180mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Specification: Frame: Nukeproof Reactor 275 Alloy, 140mm Travel, custom triple butted hydro-formed tube set for front triangle and chain stays, UD woven carbon fibre Seat stays Internal cable routing ISCG05 mount Enduro bearings Threaded 73mm BB Boost 148mm rear axle spacing 3D contoured Rubber frame protection Two position adjustable Flip chip system Shock: RockShox Super Deluxe Ultimate RCT, Custom ML 320 tune, 210x55mm, Bearing End, 1x bottomless token fitted Headset: Nukeproof, 44-56 IITS Weight: 3.79Kgs/8.3lbs (Medium option)
All too often corners are cut to meet price-points in the entry-level road bike market but the Allez redefines what it means to be ''entry level.'' Focusing on weight refinement and reliability like nothing else in its class the Allez is the first to make these technologies accessible to everyone. Whether you're just getting into road cycling commuting or looking for a new bike the Allez is just as performance-packed as it is versatile. For the build this Allez features crisp and reliable Shimano Sora shifting durable Axis Sport alloy wheels our new super-comfy Body Geometry Bridge saddle and well-protected RoadSport tires. Not only does a lightweight bike feel better when you're climbing up a hill but it's also essential when you're carrying your bike up to the 5th floor and this was at the forefront of the frame design. With a redesigned E5 Alloy frame the Allez features a class-leading weight. Aggressively thin-walled yet tough tubes have been implemented to save weight and this results in over a 450g (1-pound) reduction in the frame and fork alone when compared to some models of yesteryear. Entry-level road bikes often times feature either alloy or cheap carbon fiber forks that greatly detract from the overall ride quality. But with a full FACT carbon fiber fork the Allez is better handling smoother riding and lower in weight—floating over rough chip-seal and carving through corners like a slalom skier. For the geometry we developed the Allez by utilizing our vast Retül fit database. This meant creating a geometry that's sure to cover a broad range of positions while still providing the performance-minded handling you'd expect from your first bike. This Allez also features integrated rack and fender mounts allowing you to get weight of your backpack off you and onto a lightweight rack. This not only makes for a good road bike but it also enables you to transform it into a fast commuter. Frame Specialized E5 Premium Aluminum fully manipulated tubing w/ SmoothWelds 1-1/8'- 1-3/8' tapered head tube internal cable routing threaded BB 130mm spacing Fork Specialized FACT carbon 1-1/8' to 1-3/8' taper fender eyelets Handlebars Specialized Shallow Drop 6061 70x125mm 31.8mm clamp Stem Specialized 3D-forged alloy 4-bolt 7-degree rise Tape Specialized S-Wrap Seat Binder Bolt-type 31.8mm Front Brake Axis 1.0 caliper Rear Brake Axis 1.0 caliper Shift Levers Shimano Sora 9-speed Front Derailleur Shimano Sora clamp-on Rear Derailleur Shimano Sora 9-speed Cassette SunRace 9-speed 11-32t Crankset Praxis Alba Chainrings 50/34T Bottom Bracket Praxis 68mm BSA Chain KMC X9 9-speed w/ Missing Link™ Front Wheel Axis Sport Rear Wheel Axis Sport Front Tire RoadSport 700x26mm Rear Tire RoadSport 700x26mm SeatPost Alloy 2-bolt Clamp 12mm offset 27.2mm anti-corrosion hardware Inner Tubes Presta 40mm valve Saddle Body Geometry Bridge Saddle steel rails
Nukeproof Dissent 297 Alloy Frame - GreyFeaturing a robust 6061 aluminium build, this full-suspension mountain bike (MTB) frame has been put through a hydroforming and triple-butting process for exceptional strength, durability and toughness as you attack the trails. Engineered for riders who want to complete their mullet bike setup, this version also allows for a 29" front wheel and a 27.5" rear wheel to be fitted. Another highlight is its 157x12mm rear hub Boost axle spacing, which delivers stiff and responsive handling on the most demanding of terrain conditions.“It makes me want to race some World Cups again (Sam Hill)".Racing is in Nukeproof's DNA. It comes from being developed and tested in conjunction with the world's fastest racers. The updated Dissent platform shares some similarities with the Pulse at first glance, but if you dig a little deeper it is actually quite different. The main changes Nukeproof wanted to make were:- Simplify the design, to drop the weight and increase the front triangle stiffness.- More progressive leverage rate to increase the mid-stroke support to make the bike pump better, sit higher in the travel, improve stability in corners and improve the liveliness of the ride.Structurally the most obvious change is an all new suspension design for the Dissent. In a move away from the Fallout Linkage; The updated Dissent's rocker link is now positioned on the outside of the seat tube, rather than tucked inside a clamshell as before. This allows us to drop a fair bit of weight whilst increasing the front triangle stiffness at the same time.Lightweight Full Suspension MTB Frame with 200mm TravelThe suspension platform now uses a push rather than a pull link, helping to reduce the loads and stresses on the frame again helping to further save weight and improve durability. The result of all of this is that the Dissent frame is over 400g lighter than the Pulse.The Dissent platform was originally conceived by Nukeproof engineers as a concept to test several progression curve theories at once. However, in turning the theory into reality, Nukeproof created something much better than expected, and the prototype won on its international debut at Crankworx festival's Garbanzo Downhill race with Sam Hill.It is not uncommon for different world cup riders to want a slightly different characteristic to one another depending on factors such as their riding style and whether they run flat pedals or not. The Dissent takes this into account with an adjustable main pivot flip chip, designed to essentially work like a bottomless token for a coil shock. The Dissent Frame now offers riders the choice of 4 main pivot positions, which alter how progressive the suspension is. Cleverly the geometry and travel do not change between positions. Note: The sag difference between each setting is around 1% so you should not need a different spring rate.The Main pivot flip chips are fast and simple to change and offer a tailored factory set up for every rider!Further custom tuning can be done via Nukeproof's new three-position adjustable chainstay features interchangeable dropout inserts. The chainstay flip chips allow you to alter the wheelbase by 5-10mm depending on the type of track you're riding, your height or riding style.The combination of frame adaptability, a custom hydroformed 6061 aluminium tubeset, a confidence inspiring 63-degree head angle and 200mm of travel via Nukeproof's new Dissent platform make this bike the privateers dream. The centrally-positioned shock and linkage system ensure optimum handling while other features include a true 1.5” head tube, ISCG 05 mounts and a 157x12mm rear axle to keep things stable at the rear.Features: Material: Hydroformed 6061 Triple-Butted Aluminium Use: Mountain Bike (MTB) frame Size Options: M/L/XL Shock: RockShox Super Deluxe Coil Ultimate DH RC, Custom ML Tune, 250x75mm, Bearing End, Red Coil Spring (M=350LBS/L=400LBS /XL=450LBS SPRING) Fork Travel: 200mm Axle to Crown: 602mm Fork Offset: 46mm Rear Travel: 200mm Wheels Size: Front: 29" Rear: 27.5" Max Tyre Size: 2.5" Recommended Shock Sag (Measured standing): 30% Shock Size: 250x75mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Headtube: 49mm Semi-Integrated Headset: ZS49-28.6 / ZS49/40 Bearings Required: 6x BB 6902 LLU MAX, 2x 63804-2RS MAX Seatpost: 30.9mm Seat Clamp: 34.9mm Bottom Bracket: Threaded 83mm BSA Rear Hub: Boost 157x12mm Rear Axle: Nukeproof M12x1.75 198mm Chain Guide: ISCG05 Brake Mount: 200mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Three-stage Dissent linkage Four position adjustable linkage progression chip system Three position adjustable chainstay length Weight: 5.06kgs/11.1lbsBuy Nukeproof Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Dissent 297 Alloy Frame - GreyFeaturing a robust 6061 aluminium build, this full-suspension mountain bike (MTB) frame has been put through a hydroforming and triple-butting process for exceptional strength, durability and toughness as you attack the trails. Engineered for riders who want to complete their mullet bike setup, this version also allows for a 29" front wheel and a 27.5" rear wheel to be fitted. Another highlight is its 157x12mm rear hub Boost axle spacing, which delivers stiff and responsive handling on the most demanding of terrain conditions.“It makes me want to race some World Cups again (Sam Hill)".Racing is in Nukeproof's DNA. It comes from being developed and tested in conjunction with the world's fastest racers. The updated Dissent platform shares some similarities with the Pulse at first glance, but if you dig a little deeper it is actually quite different. The main changes Nukeproof wanted to make were:- Simplify the design, to drop the weight and increase the front triangle stiffness.- More progressive leverage rate to increase the mid-stroke support to make the bike pump better, sit higher in the travel, improve stability in corners and improve the liveliness of the ride.Structurally the most obvious change is an all new suspension design for the Dissent. In a move away from the Fallout Linkage; The updated Dissent's rocker link is now positioned on the outside of the seat tube, rather than tucked inside a clamshell as before. This allows us to drop a fair bit of weight whilst increasing the front triangle stiffness at the same time.Lightweight Full Suspension MTB Frame with 200mm TravelThe suspension platform now uses a push rather than a pull link, helping to reduce the loads and stresses on the frame again helping to further save weight and improve durability. The result of all of this is that the Dissent frame is over 400g lighter than the Pulse.The Dissent platform was originally conceived by Nukeproof engineers as a concept to test several progression curve theories at once. However, in turning the theory into reality, Nukeproof created something much better than expected, and the prototype won on its international debut at Crankworx festival's Garbanzo Downhill race with Sam Hill.It is not uncommon for different world cup riders to want a slightly different characteristic to one another depending on factors such as their riding style and whether they run flat pedals or not. The Dissent takes this into account with an adjustable main pivot flip chip, designed to essentially work like a bottomless token for a coil shock. The Dissent Frame now offers riders the choice of 4 main pivot positions, which alter how progressive the suspension is. Cleverly the geometry and travel do not change between positions. Note: The sag difference between each setting is around 1% so you should not need a different spring rate.The Main pivot flip chips are fast and simple to change and offer a tailored factory set up for every rider!Further custom tuning can be done via Nukeproof's new three-position adjustable chainstay features interchangeable dropout inserts. The chainstay flip chips allow you to alter the wheelbase by 5-10mm depending on the type of track you're riding, your height or riding style.The combination of frame adaptability, a custom hydroformed 6061 aluminium tubeset, a confidence inspiring 63-degree head angle and 200mm of travel via Nukeproof's new Dissent platform make this bike the privateers dream. The centrally-positioned shock and linkage system ensure optimum handling while other features include a true 1.5” head tube, ISCG 05 mounts and a 157x12mm rear axle to keep things stable at the rear.Features: Material: Hydroformed 6061 Triple-Butted Aluminium Use: Mountain Bike (MTB) frame Size Options: M/L/XL Shock: RockShox Super Deluxe Coil Ultimate DH RC, Custom ML Tune, 250x75mm, Bearing End, Red Coil Spring (M=350LBS/L=400LBS /XL=450LBS SPRING) Fork Travel: 200mm Axle to Crown: 602mm Fork Offset: 46mm Rear Travel: 200mm Wheels Size: Front: 29" Rear: 27.5" Max Tyre Size: 2.5" Recommended Shock Sag (Measured standing): 30% Shock Size: 250x75mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Headtube: 49mm Semi-Integrated Headset: ZS49-28.6 / ZS49/40 Bearings Required: 6x BB 6902 LLU MAX, 2x 63804-2RS MAX Seatpost: 30.9mm Seat Clamp: 34.9mm Bottom Bracket: Threaded 83mm BSA Rear Hub: Boost 157x12mm Rear Axle: Nukeproof M12x1.75 198mm Chain Guide: ISCG05 Brake Mount: 200mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Three-stage Dissent linkage Four position adjustable linkage progression chip system Three position adjustable chainstay length Weight: 5.06kgs/11.1lbsBuy Nukeproof Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Dissent 275 Alloy Frame - GreyThis full suspension mountain bike (MTB) frame is well-equipped for fast and intense trail riding, thanks to its high-quality aluminium build that's specifically developed for the most demanding of rides. Designed for maximum strength and durability as you carve your way around the mountain, Nukeproof has also put this model through a hydroforming and triple-butting process. In addition, it is kitted out with a RockShox Super Deluxe Coil Ultimate DH RC rear shock that provides smooth and consistent rear end suspension performance as you charge from trail to trail. Another highlight is its comfortable geometry that includes internal cable routing for a clean, sleek finish.“It makes me want to race some World Cups again (Sam Hill)".Racing is in Nukeproof's DNA. It comes from being developed and tested in conjunction with the world's fastest racers.The updated Dissent platform shares some similarities with the Pulse at first glance, but if you dig a little deeper it is actually quite different. The main changes Nukeproof wanted to make were:- Simplify the design, to drop the weight and increase the front triangle stiffness.- More progressive leverage rate to increase the mid stroke support to make the bike pump better, sit higher in the travel, improve stability in corners and improve the liveliness of the ride.Structurally the most obvious change is an all-new suspension design for the Dissent. In a move away from the Fallout Linkage; The updated Dissent's rocker link is now positioned on the outside of the seat tube, rather than tucked inside a clamshell as before. This allows us to drop a fair bit of weight whilst increasing the front triangle stiffness at the same time.Trail-Ready Full Suspension Alloy MTB FrameThe suspension platform now uses a push rather than a pull link, helping to reduce the loads and stresses on the frame again helping to further save weight and improve durability. The result of all of this is that the Dissent frame is over 400g lighter than the Pulse.The Dissent platform was originally conceived by Nukeproof's engineers as a concept to test several progression curve theories at once. However, in turning the theory into reality, the brand created something much better than expected, and the prototype won on its international debut at Crankworx festival's Garbanzo Downhill race with Sam Hill.It is not uncommon for different world cup riders to want a slightly different characteristic to one another depending on factors such as their riding style and whether they run flat pedals or not. The Dissent takes this into account with an adjustable main pivot flip chip, designed to essentially work like a bottomless token for a coil shock. The Dissent frame now offers riders the choice of four main pivot positions, which alter how progressive the suspension is. Cleverly the geometry and travel do not change between positions. Note: The sag difference between each setting is around 1% so you should not need a different spring rate.The main pivot flip chips are fast and simple to change and offer a tailored factory set up for every rider!Further custom tuning can be done via Nukeproof's new three-position adjustable chainstay features interchangeable dropout inserts. The chainstay flip chips allow you to alter the wheelbase by 5-10mm depending on the type of track you're riding, your height or riding style.The combination of frame adaptability, a custom hydroformed 6061 aluminium tubeset, a confidence inspiring 63-degree head angle and 200mm of travel via Nukeproof's new Dissent platform make this bike the privateers dream. The centrally-positioned shock and linkage system ensure optimum handling while other features include a true 1.5” head tube, ISCG 05 mounts and a 157mm x 12mm rear axle to keep things stable at the rear.Features: Material: Nukeproof Dissent 275 Alloy, hydroformed 6061 triple-butted Aluminium, 200mm travel Use: Mountain Bike (MTB) frame Shock: RockShox Super Deluxe Coil Ultimate DH RC, Custom ML Tune, 250x75mm, Bearing End, Red Coil Spring (S=300LBS/M=350LBS/L=400LBS /XL=450LBS SPRING) Size Options: S/M/L/XL Fork Travel: 200mm Axle to Crown: 581mm Fork Offset: 46mm Rear Travel: 200mm Wheels Size: 27.5" Max Tyre Size: 2.5" Recommended Shock Sag (Measured Standing): 30% Shock Size: 250x75mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Headtube: 49mm Semi-Integrated Headset: ZS49-28.6 / ZS49/40 Bearings Required: 6x BB 6902 LLU MAX, 2x 63804-2RS MAX Seatpost: 30.9mm Seat Clamp: 34.9mm Bottom Bracket: Threaded 83mm BSA Rear Hub: Boost 157x12mm Rear Axle: Nukeproof M12x1.75 198mm Chain Guide: ISCG05 Brake Mount: 200mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Cable Routing: Internal cable routing Three-stage Dissent linkage Four-position adjustable linkage progression chip system Three-position adjustable chainstay length Enduro bearings Weight: 5.03kgs/11lbsBuy Nukeproof Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Dissent 297 Alloy Frame - GreyFeaturing a robust 6061 aluminium build, this full-suspension mountain bike (MTB) frame has been put through a hydroforming and triple-butting process for exceptional strength, durability and toughness as you attack the trails. Engineered for riders who want to complete their mullet bike setup, this version also allows for a 29" front wheel and a 27.5" rear wheel to be fitted. Another highlight is its 157x12mm rear hub Boost axle spacing, which delivers stiff and responsive handling on the most demanding of terrain conditions.“It makes me want to race some World Cups again (Sam Hill)".Racing is in Nukeproof's DNA. It comes from being developed and tested in conjunction with the world's fastest racers. The updated Dissent platform shares some similarities with the Pulse at first glance, but if you dig a little deeper it is actually quite different. The main changes Nukeproof wanted to make were:- Simplify the design, to drop the weight and increase the front triangle stiffness.- More progressive leverage rate to increase the mid-stroke support to make the bike pump better, sit higher in the travel, improve stability in corners and improve the liveliness of the ride.Structurally the most obvious change is an all new suspension design for the Dissent. In a move away from the Fallout Linkage; The updated Dissent's rocker link is now positioned on the outside of the seat tube, rather than tucked inside a clamshell as before. This allows us to drop a fair bit of weight whilst increasing the front triangle stiffness at the same time.Lightweight Full Suspension MTB Frame with 200mm TravelThe suspension platform now uses a push rather than a pull link, helping to reduce the loads and stresses on the frame again helping to further save weight and improve durability. The result of all of this is that the Dissent frame is over 400g lighter than the Pulse.The Dissent platform was originally conceived by Nukeproof engineers as a concept to test several progression curve theories at once. However, in turning the theory into reality, Nukeproof created something much better than expected, and the prototype won on its international debut at Crankworx festival's Garbanzo Downhill race with Sam Hill.It is not uncommon for different world cup riders to want a slightly different characteristic to one another depending on factors such as their riding style and whether they run flat pedals or not. The Dissent takes this into account with an adjustable main pivot flip chip, designed to essentially work like a bottomless token for a coil shock. The Dissent Frame now offers riders the choice of 4 main pivot positions, which alter how progressive the suspension is. Cleverly the geometry and travel do not change between positions. Note: The sag difference between each setting is around 1% so you should not need a different spring rate.The Main pivot flip chips are fast and simple to change and offer a tailored factory set up for every rider!Further custom tuning can be done via Nukeproof's new three-position adjustable chainstay features interchangeable dropout inserts. The chainstay flip chips allow you to alter the wheelbase by 5-10mm depending on the type of track you're riding, your height or riding style.The combination of frame adaptability, a custom hydroformed 6061 aluminium tubeset, a confidence inspiring 63-degree head angle and 200mm of travel via Nukeproof's new Dissent platform make this bike the privateers dream. The centrally-positioned shock and linkage system ensure optimum handling while other features include a true 1.5” head tube, ISCG 05 mounts and a 157x12mm rear axle to keep things stable at the rear.Features: Material: Hydroformed 6061 Triple-Butted Aluminium Use: Mountain Bike (MTB) frame Size Options: M/L/XL Shock: RockShox Super Deluxe Coil Ultimate DH RC, Custom ML Tune, 250x75mm, Bearing End, Red Coil Spring (M=350LBS/L=400LBS /XL=450LBS SPRING) Fork Travel: 200mm Axle to Crown: 602mm Fork Offset: 46mm Rear Travel: 200mm Wheels Size: Front: 29" Rear: 27.5" Max Tyre Size: 2.5" Recommended Shock Sag (Measured standing): 30% Shock Size: 250x75mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Headtube: 49mm Semi-Integrated Headset: ZS49-28.6 / ZS49/40 Bearings Required: 6x BB 6902 LLU MAX, 2x 63804-2RS MAX Seatpost: 30.9mm Seat Clamp: 34.9mm Bottom Bracket: Threaded 83mm BSA Rear Hub: Boost 157x12mm Rear Axle: Nukeproof M12x1.75 198mm Chain Guide: ISCG05 Brake Mount: 200mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Three-stage Dissent linkage Four position adjustable linkage progression chip system Three position adjustable chainstay length Weight: 5.06kgs/11.1lbsBuy Nukeproof Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Dissent 297 Alloy Frame - GreyFeaturing a robust 6061 aluminium build, this full-suspension mountain bike (MTB) frame has been put through a hydroforming and triple-butting process for exceptional strength, durability and toughness as you attack the trails. Engineered for riders who want to complete their mullet bike setup, this version also allows for a 29" front wheel and a 27.5" rear wheel to be fitted. Another highlight is its 157x12mm rear hub Boost axle spacing, which delivers stiff and responsive handling on the most demanding of terrain conditions.“It makes me want to race some World Cups again (Sam Hill)".Racing is in Nukeproof's DNA. It comes from being developed and tested in conjunction with the world's fastest racers. The updated Dissent platform shares some similarities with the Pulse at first glance, but if you dig a little deeper it is actually quite different. The main changes Nukeproof wanted to make were:- Simplify the design, to drop the weight and increase the front triangle stiffness.- More progressive leverage rate to increase the mid-stroke support to make the bike pump better, sit higher in the travel, improve stability in corners and improve the liveliness of the ride.Structurally the most obvious change is an all new suspension design for the Dissent. In a move away from the Fallout Linkage; The updated Dissent's rocker link is now positioned on the outside of the seat tube, rather than tucked inside a clamshell as before. This allows us to drop a fair bit of weight whilst increasing the front triangle stiffness at the same time.Lightweight Full Suspension MTB Frame with 200mm TravelThe suspension platform now uses a push rather than a pull link, helping to reduce the loads and stresses on the frame again helping to further save weight and improve durability. The result of all of this is that the Dissent frame is over 400g lighter than the Pulse.The Dissent platform was originally conceived by Nukeproof engineers as a concept to test several progression curve theories at once. However, in turning the theory into reality, Nukeproof created something much better than expected, and the prototype won on its international debut at Crankworx festival's Garbanzo Downhill race with Sam Hill.It is not uncommon for different world cup riders to want a slightly different characteristic to one another depending on factors such as their riding style and whether they run flat pedals or not. The Dissent takes this into account with an adjustable main pivot flip chip, designed to essentially work like a bottomless token for a coil shock. The Dissent Frame now offers riders the choice of 4 main pivot positions, which alter how progressive the suspension is. Cleverly the geometry and travel do not change between positions. Note: The sag difference between each setting is around 1% so you should not need a different spring rate.The Main pivot flip chips are fast and simple to change and offer a tailored factory set up for every rider!Further custom tuning can be done via Nukeproof's new three-position adjustable chainstay features interchangeable dropout inserts. The chainstay flip chips allow you to alter the wheelbase by 5-10mm depending on the type of track you're riding, your height or riding style.The combination of frame adaptability, a custom hydroformed 6061 aluminium tubeset, a confidence inspiring 63-degree head angle and 200mm of travel via Nukeproof's new Dissent platform make this bike the privateers dream. The centrally-positioned shock and linkage system ensure optimum handling while other features include a true 1.5” head tube, ISCG 05 mounts and a 157x12mm rear axle to keep things stable at the rear.Features: Material: Hydroformed 6061 Triple-Butted Aluminium Use: Mountain Bike (MTB) frame Size Options: M/L/XL Shock: RockShox Super Deluxe Coil Ultimate DH RC, Custom ML Tune, 250x75mm, Bearing End, Red Coil Spring (M=350LBS/L=400LBS /XL=450LBS SPRING) Fork Travel: 200mm Axle to Crown: 602mm Fork Offset: 46mm Rear Travel: 200mm Wheels Size: Front: 29" Rear: 27.5" Max Tyre Size: 2.5" Recommended Shock Sag (Measured standing): 30% Shock Size: 250x75mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Headtube: 49mm Semi-Integrated Headset: ZS49-28.6 / ZS49/40 Bearings Required: 6x BB 6902 LLU MAX, 2x 63804-2RS MAX Seatpost: 30.9mm Seat Clamp: 34.9mm Bottom Bracket: Threaded 83mm BSA Rear Hub: Boost 157x12mm Rear Axle: Nukeproof M12x1.75 198mm Chain Guide: ISCG05 Brake Mount: 200mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Three-stage Dissent linkage Four position adjustable linkage progression chip system Three position adjustable chainstay length Weight: 5.06kgs/11.1lbsBuy Nukeproof Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Scout 275 Comp Alloy Bike (Deore12)The Scout 275 Comp Alloy is a superb gateway into the world of rewarding mountain bike riding. Nukeproof has engineered the Comp model with a robust but lightweight alloy frame and kitted it out with excellent components to keep you composed and in control regardless of whatever the mountain throws your way.It has 140mm-travel Marzocchi Bomber Z2 suspension forks to soak up hits from the trail while retaining exceptional front-wheel traction in all-weather conditions. Backed up by a smooth-shifting Shimano Deore 12-Speed groupset with a wide-ranging Sunrace 10-51T cassette and hydraulic disc brakes - this groupset ensures you have reliability and power when climbing and descending. It is also armed with custom-built Tubeless Ready Nukeproof Neutron V2 / WTB KOM Trail i30 wheels wrapped in Schwalbe Magic Mary and Hans Dampf tyres.The Hardtail: Often mooted as the perfect style bike to master your first pedal strokes into the world of mountain biking or the best way to develop your bike handling skills. Mastering a hardtail will sharpen your skills from perfecting your balance point on the bike through to being creative with the trail ahead reading natural features to generate speed. One thing is for sure though; you shouldn’t underestimate what this hardtail is truly capable of.The all-new Scout is a graduate from the school of gravity. Its geometry is on the “aggressive” side of the coin, designed to attack the trail ahead. The new pedalling position, developed using Nukeproof’s Saddle Offset theory, will propel you efficiently up the trail ready for the gnarliest descent you can handle. The new geometry adds to the all-round capability of the Scout. Improved riding position and sizing combined with a low bottom bracket enhances your control in the corners. The Scout is a versatile frame that is ready to scout out endless single track, session technical enduro trails or just hoon around like you’re auditioning for the latest “Scoutin’ About” video epic.The Nukeproof Scout is the embodiment of the Nukeproof attitude. When riding a Scout, you become part of something special and every ride of this hardcore hardtail rewards every last drop of your skill and commitment. You are inducted into something a little bit special too, that subtle nod of appreciation from other Scout owners that you too know what a special frame this is, through to the support and community that has grown around Scout ownership.The New Scout, welcome to the world of Scoutin’ About, it really is an attitude.The 3rd generation the Scout has been tweaked to be the finest vintage of Scout.Key Upgrades Include: All New Frame: The frame itself has matured slightly. Subtle touches such as moulded protection through to new UDH (universal derailleur hanger) dropouts to name but a few of the upgrades “Tweaked” Geometry: Nukeproof loved the way the V2 Scout rode, but a few subtle updates to areas such as the seat tube and head tube angles make this latest version even better Improved Sizing: The new Scout offers size specific chainstays as well as improved spacing of sizes to match the rest of the Nukeproof range Sizing: Scout comes from Small to XL in 275 and Medium to XXL in the 290 version, updated geometry to give the V3 Scout more efficiency to the trails and more attitude on the trails The all new Nukeproof Scout builds on the cult like “Scoutin’ About” attitude of the hardtail. Buying a Scout means not only do you get the raddest hardtail on the market, join one of the best communities of bikersFeatures: Frame: Nukeproof Scout 275, custom triple butted hydro-formed Alloy, internal cable routing for dropper seat posts, ISCG 05 mount, threaded 73mm BB, Boost 148mm rear axle spacing, includes 3D Contoured Rubber Frame Protection for Down Tube, Seat Stay and Chain Stay Fork: Marzocchi Bomber Z2, 140mm, 44mm Offset, BOOST, RAIL Damper, Gloss Black Front Wheel: Nukeproof Neutron V2 Hub 15x110mm, built onto a 27.5” WTB KOM Trail i30 TCS 2.0 Rim, 32H Rear Wheel: Nukeproof Neutron V2 Hub 148x12mm, Shimano freehub with 36 points of engagement, built onto a 27.5” WTB KOM Trail i30 TCS 2.0 Rim, 32H Tyres: Front: Schwalbe Magic Mary, Snakeskin, TL Easy, Addix Soft, 27.5x2.6"; Rear: Schwalbe Hans Dampf, Snakeskin, TL Easy, Addix Speedgrip. 27.5x2.6" Crankset: Shimano Deore M6100 12 Speed Crank, 170mm, 32T, 52mm Chainline Shifter: Shimano Deore M6100-IR, 12-speed Rapidfire Plus, I-Spec EV Rear Derailleur: Shimano Deore M6100, SGS 12-Speed, Shadow Plus Chain: Shimano Deore M6100 12-Speed Cassette: Sunrace 12-Speed,11-51T Brakes: SRAM DB8 4-Pot brakes Front Rotor: SRAM Centerline, 200mm Rear Rotor: SRAM Centerline, 180mm Handlebars: Nukeproof Neutron V2 25mm Rise, Width - S780mm, M780mm, L800mm, XL800mm Stem: Nukeproof Neutron AM, 45mm, black Saddle: Nukeproof, Black Seatpost: Brand X Ascend internal, 31.6mm, S:125mm drop; M:150mm drop; L:170mm drop; XL:200mm drop Headset: Nukeproof Warhead, 44-56 IITS Grips: Nukeproof Sam Hill Signature Weight: 13.80kgSpecification: Material: Hydroformed 6061 Triple-Butted Aluminium Fork Travel: 140mm Axle to Crown: 532mm Fork Offset: 44mm Wheels Size: 27.5" Max Tyre Size: 2.6" Headtube: 44-56mm Tapered Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 34.9mm BB: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: SRAM UDH Maxle Stealth M12x1.0 180mm (Thread Length 13mm) Chain Guide: ISCG05 Brake Mount: 180mm Post Mount Max Chainring: 34T (32T Oval) Protection: 3D Contoured Rubber Frame Protection for DT/SS/CSEasy AssemblyWhen you order a bike, one of our trained mechanics will carefully prepare and pack your bike for shipping. Upon delivery, the assembly is simple and all necessary tools and plastic pedals are conveniently included in the box.Depending on the delivery service and destination, bikes will either be delivered in a large or a small box. Below is a guide as to how your bike will arrive: All bikes for delivery within the UK and Republic of Ireland will be delivered in a large box, except for balance bikes and BMX bikes, which are always delivered in manufacturer’s boxes. All bikes for delivery within the EU on a standard service will be delivered in a large box. If an express delivery option is chosen, your bike will be packed into a small box. Again, the exception is balance bikes and BMX bikes, which are always delivered in manufacturer’s boxes. All bikes for worldwide delivery outside the EU will be delivered in small boxes.This video demonstrates assembly from a SMALL BOX.This video demonstrates assembly from a LARGE BOX.Please note that due to ongoing issues in the global bike supply chain, manufacturers may substitute certain component items due to availability. In this situation, they will be replaced with the same quality or better performing parts.Buy Nukeproof Bikes from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Scout 275 Comp Alloy Bike (Deore12)The Scout 275 Comp Alloy is a superb gateway into the world of rewarding mountain bike riding. Nukeproof has engineered the Comp model with a robust but lightweight alloy frame and kitted it out with excellent components to keep you composed and in control regardless of whatever the mountain throws your way.It has 140mm-travel Marzocchi Bomber Z2 suspension forks to soak up hits from the trail while retaining exceptional front-wheel traction in all-weather conditions. Backed up by a smooth-shifting Shimano Deore 12-Speed groupset with a wide-ranging Sunrace 10-51T cassette and hydraulic disc brakes - this groupset ensures you have reliability and power when climbing and descending. It is also armed with custom-built Tubeless Ready Nukeproof Neutron V2 / WTB KOM Trail i30 wheels wrapped in Schwalbe Magic Mary and Hans Dampf tyres.The Hardtail: Often mooted as the perfect style bike to master your first pedal strokes into the world of mountain biking or the best way to develop your bike handling skills. Mastering a hardtail will sharpen your skills from perfecting your balance point on the bike through to being creative with the trail ahead reading natural features to generate speed. One thing is for sure though; you shouldn’t underestimate what this hardtail is truly capable of.The all-new Scout is a graduate from the school of gravity. Its geometry is on the “aggressive” side of the coin, designed to attack the trail ahead. The new pedalling position, developed using Nukeproof’s Saddle Offset theory, will propel you efficiently up the trail ready for the gnarliest descent you can handle. The new geometry adds to the all-round capability of the Scout. Improved riding position and sizing combined with a low bottom bracket enhances your control in the corners. The Scout is a versatile frame that is ready to scout out endless single track, session technical enduro trails or just hoon around like you’re auditioning for the latest “Scoutin’ About” video epic.The Nukeproof Scout is the embodiment of the Nukeproof attitude. When riding a Scout, you become part of something special and every ride of this hardcore hardtail rewards every last drop of your skill and commitment. You are inducted into something a little bit special too, that subtle nod of appreciation from other Scout owners that you too know what a special frame this is, through to the support and community that has grown around Scout ownership.The New Scout, welcome to the world of Scoutin’ About, it really is an attitude.The 3rd generation the Scout has been tweaked to be the finest vintage of Scout.Key Upgrades Include: All New Frame: The frame itself has matured slightly. Subtle touches such as moulded protection through to new UDH (universal derailleur hanger) dropouts to name but a few of the upgrades “Tweaked” Geometry: Nukeproof loved the way the V2 Scout rode, but a few subtle updates to areas such as the seat tube and head tube angles make this latest version even better Improved Sizing: The new Scout offers size specific chainstays as well as improved spacing of sizes to match the rest of the Nukeproof range Sizing: Scout comes from Small to XL in 275 and Medium to XXL in the 290 version, updated geometry to give the V3 Scout more efficiency to the trails and more attitude on the trails The all new Nukeproof Scout builds on the cult like “Scoutin’ About” attitude of the hardtail. Buying a Scout means not only do you get the raddest hardtail on the market, join one of the best communities of bikersFeatures: Frame: Nukeproof Scout 275, custom triple butted hydro-formed Alloy, internal cable routing for dropper seat posts, ISCG 05 mount, threaded 73mm BB, Boost 148mm rear axle spacing, includes 3D Contoured Rubber Frame Protection for Down Tube, Seat Stay and Chain Stay Fork: Marzocchi Bomber Z2, 140mm, 44mm Offset, BOOST, RAIL Damper, Gloss Black Front Wheel: Nukeproof Neutron V2 Hub 15x110mm, built onto a 27.5” WTB KOM Trail i30 TCS 2.0 Rim, 32H Rear Wheel: Nukeproof Neutron V2 Hub 148x12mm, Shimano freehub with 36 points of engagement, built onto a 27.5” WTB KOM Trail i30 TCS 2.0 Rim, 32H Tyres: Front: Schwalbe Magic Mary, Snakeskin, TL Easy, Addix Soft, 27.5x2.6"; Rear: Schwalbe Hans Dampf, Snakeskin, TL Easy, Addix Speedgrip. 27.5x2.6" Crankset: Shimano Deore M6100 12 Speed Crank, 170mm, 32T, 52mm Chainline Shifter: Shimano Deore M6100-IR, 12-speed Rapidfire Plus, I-Spec EV Rear Derailleur: Shimano Deore M6100, SGS 12-Speed, Shadow Plus Chain: Shimano Deore M6100 12-Speed Cassette: Sunrace 12-Speed,11-51T Brakes: SRAM DB8 4-Pot brakes Front Rotor: SRAM Centerline, 200mm Rear Rotor: SRAM Centerline, 180mm Handlebars: Nukeproof Neutron V2 25mm Rise, Width - S780mm, M780mm, L800mm, XL800mm Stem: Nukeproof Neutron AM, 45mm, black Saddle: Nukeproof, Black Seatpost: Brand X Ascend internal, 31.6mm, S:125mm drop; M:150mm drop; L:170mm drop; XL:200mm drop Headset: Nukeproof Warhead, 44-56 IITS Grips: Nukeproof Sam Hill Signature Weight: 13.80kgSpecification: Material: Hydroformed 6061 Triple-Butted Aluminium Fork Travel: 140mm Axle to Crown: 532mm Fork Offset: 44mm Wheels Size: 27.5" Max Tyre Size: 2.6" Headtube: 44-56mm Tapered Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 34.9mm BB: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: SRAM UDH Maxle Stealth M12x1.0 180mm (Thread Length 13mm) Chain Guide: ISCG05 Brake Mount: 180mm Post Mount Max Chainring: 34T (32T Oval) Protection: 3D Contoured Rubber Frame Protection for DT/SS/CSEasy AssemblyWhen you order a bike, one of our trained mechanics will carefully prepare and pack your bike for shipping. Upon delivery, the assembly is simple and all necessary tools and plastic pedals are conveniently included in the box.Depending on the delivery service and destination, bikes will either be delivered in a large or a small box. Below is a guide as to how your bike will arrive: All bikes for delivery within the UK and Republic of Ireland will be delivered in a large box, except for balance bikes and BMX bikes, which are always delivered in manufacturer’s boxes. All bikes for delivery within the EU on a standard service will be delivered in a large box. If an express delivery option is chosen, your bike will be packed into a small box. Again, the exception is balance bikes and BMX bikes, which are always delivered in manufacturer’s boxes. All bikes for worldwide delivery outside the EU will be delivered in small boxes.This video demonstrates assembly from a SMALL BOX.This video demonstrates assembly from a LARGE BOX.Please note that due to ongoing issues in the global bike supply chain, manufacturers may substitute certain component items due to availability. In this situation, they will be replaced with the same quality or better performing parts.Buy Nukeproof Bikes from Chain Reaction Cycles, the World's Largest Online Bike Store.
Well-equipped for fast and intense trail riding, this full suspension mountain bike (MTB) frame features a high-quality aluminium build that's specifically developed for the most demanding of rides. Nukeproof has put this model through a hydroforming and triple-butting process to ensure maximum strength and durability as you carve your way around the mountain. In addition, it is kitted out with a RockShox Super Deluxe Coil Ultimate DH RC rear shock that provides smooth and consistent rear end suspension performance as you charge from trail to trail. Another highlight is its comfortable geometry that includes internal cable routing for a clean, sleek finish. “It makes me want to race some World Cups again (Sam Hill)". Racing is in Nukeproof's DNA. It comes from being developed and tested in conjunction with the world’s fastest racers. The updated Dissent platform shares some similarities with the Pulse at first glance, but if you dig a little deeper it is actually quite different. The main changes Nukeproof wanted to make were: - Simplify the design, to drop the weight and increase the front triangle stiffness. - More progressive leverage rate to increase the mid stroke support to make the bike pump better, sit higher in the travel, improve stability in corners and improve the liveliness of the ride. Structurally the most obvious change is an all-new suspension design for the Dissent. In a move away from the Fallout Linkage; The updated Dissent’s rocker link is now positioned on the outside of the seat tube, rather than tucked inside a clamshell as before. This allows us to drop a fair bit of weight whilst increasing the front triangle stiffness at the same time. Trail-Ready Full Suspension Alloy MTB Frame The suspension platform now uses a push rather than a pull link, helping to reduce the loads and stresses on the frame again helping to further save weight and improve durability. The result of all of this is that the Dissent frame is over 400g lighter than the Pulse. The Dissent platform was originally conceived by Nukeproof's engineers as a concept to test several progression curve theories at once. However, in turning the theory into reality, the brand created something much better than expected, and the prototype won on its international debut at Crankworx festival’s Garbanzo Downhill race with Sam Hill. It is not uncommon for different world cup riders to want a slightly different characteristic to one another depending on factors such as their riding style and whether they run flat pedals or not. The Dissent takes this into account with an adjustable main pivot flip chip, designed to essentially work like a bottomless token for a coil shock. The Dissent frame now offers riders the choice of four main pivot positions, which alter how progressive the suspension is. Cleverly the geometry and travel do not change between positions. Note: The sag difference between each setting is around 1% so you should not need a different spring rate. The main pivot flip chips are fast and simple to change and offer a tailored factory set up for every rider! Further custom tuning can be done via Nukeproof's new three-position adjustable chainstay features interchangeable dropout inserts. The chainstay flip chips allow you to alter the wheelbase by 5-10mm depending on the type of track you’re riding, your height or riding style. The combination of frame adaptability, a custom hydroformed 6061 aluminium tubeset, a confidence inspiring 63-degree head angle and 200mm of travel via Nukeproof's new Dissent platform make this bike the privateers dream. The centrally-positioned shock and linkage system ensure optimum handling while other features include a true 1.5” head tube, ISCG 05 mounts and a 157mm x 12mm rear axle to keep things stable at the rear. Features: Material: Hydroformed 6061 Triple-Butted Aluminium Size Options: S/M/L/XL Fork Travel: 200mm Axle to Crown: 581mm Fork Offset: 46mm Rear Travel: 200mm Wheels Size: 27.5" Max Tyre Size: 2.5" Recommended Shock Sag (Measured standing): 30% Shock Size: 250x75mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Headtube: 49mm Semi-Integrated Headset: ZS49-28.6 / ZS49/40 Bearings Required: 6x BB 6902 LLU MAX, 2x 63804-2RS MAX Seatpost: 30.9mm Seat Clamp: 34.9mm BB: Threaded 83mm BSA Rear Hub: Boost 157x12mm Rear Axle: Nukeproof M12x1.75 198mm Chain Guide: ISCG05 Brake Mount: 200mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Specification: Frame: Nukeproof Dissent 275 Alloy, 200mm Travel Shock: RockShox Super Deluxe Coil Ultimate DH RC, Custom ML Tune, 250x75mm, Bearing End, Red Coil Spring (S=300LBS/M=350LBS/L=400LBS /XL=450LBS SPRING) Headset: Nukeproof, 49IITS Custom-tuned rear shock configuration Internal cable routing Enduro Bearings Threaded 83mm BB Boost 157mm rear axle spacing 3D contoured frame protection Three-stage Dissent linkage Four-position adjustable linkage progression chip system Three-position adjustable chainstay length Weight: 5.03kgs/11lbs