Race Face Ambush Knee D30™ GuardD30™ high performance shock absorbing foam,Perforated Neoprene enhances venting and moisture control,Terry lined for wicking and comfort ,Open-back construction; no shoe removal necessary,Foam padded side walls offer additional coverage,Branded rubber grab tabs,Extended Neoprene wrist.
The Next seatpost sets a new standard for a performance carbon post, featuring our new innovative Hunter head design that presents a rider with easy saddle installation, full adjustability and light weight goodness. The carbon tube is engineered & manufactured using Race Face's optimized carbon technology process, offering outstanding strength for a lightweight XC and trail post.Key Features:Features Race Face exclusive new Hunter head design,Simple, lightweight 2 bolt design permits the saddle to be installed without disassembling the head,Thumbscrew tightening system allows quick dial in of the saddle angle by hand,Angled clamp bolts allow easy tool access for hassle free adjustment and tightening,The rubber seatpost grommet fully seals the post to prevent water entering your seat tube,Hunter head is suitable for most rail types 7/8mm alloy rails and 7/9mm carbon,Wide lower cradle gives extra rail support for lightweight saddle rails,Narrow upper cradle increases the amount of forward/back saddle adjustment,Tilt Adjustment 6° up 12° down with Zero offset,The seatpost tube is manufactured using our proven Next optimized carbon technology,The highly tested & engineered unidirectional carbon tube offers outstanding fatigue & impact strength for a lightweight XC post..Specifications:Built For: XC/Trail,Size: 27.2, 30.9 & 31.6mm,Length: 400mm,Weight: 250g (30.9mm).
Introducing the Atlas pedal. A low-profile, lightweight, wide aluminium body with double-concave platform. The svelte design makes it perfect for trail bikes while chromoly axle and bottom loading hex traction pins ensure it can take abuse and perform double duty on your DH rig. All of the Race Face styling and performance expected from the Atlas line.Key Features:Super thin double concave wide platform.,Fully sealed bearing design.,Hex-head threaded pin design offers more bite for added security.,Fore and aft angled bottom-loading pins.,Hidden pin / Grease access port..Specification:Built for: Trail / AM / FR / DH.,Body Material: 6061-T6 Aluminium.,Axle Material:Chromoly steel.,Height 12-14.5mm.,Platform Size: 101x114cm.,Weight: 355g.,# of Pins: 20 SHCS hex traction pins per pedal (10 per side).,Bearings: 4 Full sealed cartridge bearings per pedal..
Race Face Single Rings - Now with performance enhancing chain retention technology. Burly enough for DH Racers and Dirt Jumpers, yet light enough for XC/singlespeed. Single Rings are machined from 7075 aluminium and tested in some of the most punishing riding terrain Built to last.Key Features:Narrow Wide tooth profiling ensures ultimate chain retention,Stiff 4mm plate thickness and I-beam construction transfer loads without flexing,7075-T6 aluminium, aerospace grade strength,Reversible laser etched graphics,Compatible for 9, 10 and 11 speed,Sizes: 30, 32, 34, 36, 38, 104 BCD (4 bolt) ,Weights: 37-57g (36T - 50g).
Trail riding can be tough on your gear. The ends of your cranks take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips!Protective rubber boots to fit over the end of your alloy crank arms.Fits:Shimano XTR,Shimano XT,Shimano SLX,Sram X7,Sram X5,Atlas,Turbine (new/old),Evolve (new/old),Deus,Ride,Most alloy road cranks.
RaceFace chainring bolt and nut set,Aluminium,Pack of 4,Allen head,Single/double ring,.
Race Face Indy Elbow D30™ GuardSpecifically designed with the growing Enduro scene in mind, the Indy Elbow combines the unrestricted mobility of the Race Face Charge Elbow with the added impact protection of D30™. Second-skin Butterfly Mesh sleeve with targeted D30™ high performance shock absorbing protective foam elbow. Protection you can trust on rowdy descents built into a minimal sleeve for unlimited range of motion while climbing. Butterfly mesh sleeve with second skin fit and targeted D30™ high performance shock absorbing foam elbow coverage. ,Silicone gripper along inner top opening ensures 'stay-put' fit. ,Woven elastic top strap with velcro closure offers personalized adjustment. ,Flatlock comfort seam finish..
Your favourite bars just got bigger, longer and lighter, Go figure? The magic of 35, believe the hype. Increasing the bar diameter to 35 allows us to shave material from the bar resulting in a dramatic reduction in overall weight while retaining the proven stiffness and performance Race Face bars are known for. NEW Superlow 10mm rise, slam that cockpit. Get flatbar cockpit height with the comfort and good looks of a riser bar. 760mm full width for increased control without sacrificing weight. Key Features: Manufactured from UD Carbon with matte clearcoat.,Carbon optimized flex for improved small bump compliance.,. Specification: Built for: XC / Trail.,Dimensions: 760mm width, 8° rearward, 5° upward.,Rise: 20mm.,Weight: 180g.,Bar Diameter: 35mm..
Race Face Flank Leg D30™ GuardD30™ high performance shock absorbing foam,Additional foam extension saves shins from pedal bite,Proven Race Face open-back construction; no shoe removal necessary,Perforated neoprene enhances venting and moisture control,Terry lined for wicking and comfort,Foam padded side walls offer additional coverage,Branded rubber grab tabs.
Race Face Atlas Pedal Bearing Rebuild KitIncludes bearings, seals, axle end cap/bolt, and bearing press,Compatible with Race Face Atlas pedals.
Key Features:Durable lightweight Nylon.Easy on, easy off velcro closure.Regular - Length 240mm/Width 80-90mm.Oversize - Length 240mm/Width 100-130mm.
Introducing the AEffect pedal. Thin platform, concave aluminum body with bottom-loading pins. Shorter spindle design shaves weight making it perfect for trail bikes while the chromoly axle and bottom loading hex traction pins ensure it can take abuse and perform double duty on your DH rig. Hidden grease access port allows for on bike maintenance.Key Features:Thin concave platform,Reduced spindle length saves weight,Hex-head threaded pin design offers more bite for added security,Hidden / Grease access port for extended life.Specification:Built For: Trail/AM/FR/DH,Body Material: 6061-T6 Aluminium,Axle Material: Chromoly steel,Height: 15-16.9mm,Platform Size: 101x100cm,Weight: 375g,Bearings: Cartridge bearings and DU bushings,# of Pins: 20 SHCS hex traction pins per pedal.