No stranger to winning awards, accolades and Enduro World Series (EWS) races, this E-MTB suspension fork is built to perform everywhere from big backcountry routes to the EWS circuit. Featuring a new design inside-and-out, this model is part of Fox Suspension's Performance Series and includes an anodised finish on its upper tubes for extra protection against wear and corrosion. It's also equipped with Boost axle spacing for additional stiffness, making it ideal for modern enduro riding. Coming complete with a Float EVOL air spring and a GRIP damper with three-position on-the-fly adjustability, this E-bike-ready fork provides a wide range of customisation, so you can benefit from a more rider-tuned feel. E-MTB Fork with FIT GRIP Damper Inspired from moto, the GRIP damper uses Fox Suspension's FIT sealed cartridge technology combined with a coil-sprung, independent floating piston. GRIP allows excess oil to purge through specially designed ports at the top of the damper to maintain consistent damping and increase durability. Float EVOL Air Spring EVOL technology increases negative air spring volume, optimising small bump sensitivity. EVOL’s linear spring curve delivers plushness off the top, extra mid-stroke support, and more tuneable bottom-out progression. The benefits of EVOL are further enhanced by Fox Suspension's Lower Leg channels and Bleeders (push-button bleeders available separately, which both function to reduce air pressure captured in the lower legs, allowing the EVOL air spring to operate freely without unintended interference. Technologies: Performance Series: Performance Series forks retain the same black anodized 7000 series aluminum upper tubes as Performance Elite, except paired with a GRIP damper. Push-button bleeders are not included but can be purchased separately. Adjustments: Three on-the-fly compression damping positions Open, Medium, Firm. Additional micro-adjust between settings Detents. Low-speed rebound 10 clicks. Floating Axle: Floating axles might look similar to other axles, but in fact they offer a distinct performance advantage due to their unique ability to match the exact width of the fork’s wheel mounting surface precisely to the front hub flange spacing, thus creating perfect chassis alignment and eliminating unwanted friction between the upper and lower fork legs. Floating axles provide much smoother suspension movement throughout the entire range of the fork’s travel, notably improving sensitivity and overall ride quality. The all-new 36 and 38 come equipped with a new quick-release lever operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release. With this system, spacing is locked in via a floating sleeve, allowing repeated front wheel removal and reinstallation while maintaining perfect fork alignment. Floating sleeve positioning comes preset from the factory so if you are unsure of how to operate the floating axle system or simply don’t want to bother with it, you can just install the front wheel and get on with your ride. Lower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel. Lower Leg Arch: Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. Fox Suspension's lower leg design pulls out all the stops, shaving every possible gram while making sure not to compromise stiffness or strength requirements of modern enduro and gravity style riding. Modern frame designs and geometry trends require modern suspension design solutions. The arch design of the all-new 36, 38, and 40 is designed to pair perfectly with modern Enduro and Downhill bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension's arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modeling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material. - Increased crown diameter to match modern frame shape profiles. - Optional mudguard with sturdy 4-point direct-mount attachment protects upper tubes and dust wipers from dirt and debris. (available separately). Manufacturer's Part Numbers: 910-20-206 Black 29" QR110 160mm 51mm 910-20-205 Black 29" QR110 160mm 44mm
No stranger to winning awards, accolades and Enduro World Series (EWS) races, this electric mountain bike (E-MTB) suspension fork is engineered for powerful front-end suspension performance. Part of Fox Suspension's prestigious Factory Series, it comes trail-ready with features and technologies that are designed to exceed the demands of Factory-level riders. With an eye-catching genuine Kashima coating on its upper tubes, it provides slippery smooth operation while remaining ultra-durable as you tackle challenging terrain conditions. Benefitting from a lightweight Float EVOL air spring and a highly adjustable GRIP2 damper, the 36 offers an excellent combination of performance and tunability, everywhere from backcountry routes to the EWS circuit. E-MTB Fork with GRIP2 Damper Fox Suspension's GRIP2 damper is the benchmark for unparalleled ride quality and ultra-precise adjustability. GRIP2 includes patented Variable Valve Control (VVC) technology which allows for external fine-tuning of suspension performance. GRIP2 achieves with the twist of a knob what typically requires the time-consuming and complicated task of completely disassembling and reassembling the fork. Float EVOL Air Spring EVOL technology increases negative air spring volume, optimising small bump sensitivity. EVOL’s linear spring curve delivers plushness off the top, extra mid-stroke support, and more tuneable bottom-out progression. The benefits of EVOL are further enhanced by the Lower Leg channels and Bleeders, which both function to reduce air pressure captured in the lower legs, allowing the EVOL air spring to operate freely without unintended interference. Technologies: Factory Series: “Factory” says it all – feature-packed and designed to exceed the demands of Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. Adjustments: High-speed compression (with VVC) 8 clicks. Low-speed compression 16 clicks. High-speed rebound (with VVC) 8 clicks. Low-speed rebound 16 clicks. Floating Axle: Floating axles might look similar to other axles, but in fact they offer a distinct performance advantage due to their unique ability to match the exact width of the fork’s wheel mounting surface precisely to the front hub flange spacing, thus creating perfect chassis alignment and eliminating unwanted friction between the upper and lower fork legs. Floating axles provide much smoother suspension movement throughout the entire range of the fork’s travel, notably improving sensitivity and overall ride quality. The all-new 36 and 38 come equipped with a new quick-release lever-operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release. With this system, spacing is locked in via a floating sleeve, allowing repeated front wheel removal and reinstallation while maintaining perfect fork alignment. Floating sleeve positioning comes preset from the factory so if you are unsure of how to operate the floating axle system or simply don’t want to bother with it, you can just install the front wheel and get on with your ride. Lower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel. Bleeders: Fox Suspension's lower leg bleeders allow for atmospheric pressure equalization at the simple press of a button. Pressure build-up in the lower legs dramatically decreases fork performance, preventing full travel from being achieved, and diminishing small bump sensitivity and responsiveness. Lower Leg Arch: Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. Fox Suspension's all-new lower leg design pulls out all the stops, shaving every possible gram while making sure not to compromise the stiffness or strength requirements of modern enduro and gravity style riding. Modern frame designs and geometry trends require modern suspension design solutions. The arch design of the all-new 36, 38, and 40 is designed to pair perfectly with modern Enduro and Downhill bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension's new arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modeling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material. Manufacturer's Part Numbers: 910-20-209 Black 27.5" QR110 140mm 44mm 910-20-208 Black 27.5" QR110 160mm 44mm 910-20-204 Black 29" QR110 160mm 51mm 910-20-203 Black 29" QR110 160mm 44mm
The GT Avalanche Elite is designed and engineered for all areas of MTB riding. Ideal for cross country fitness sessions, fast trail riding and loops of your local bike park. It features GT's Triple Triangle aluminium frame and is equipped with SR Suntour suspension, a Shimano Deore 1x11-Speed drivetrain, hydraulic disc brakes and superb Shimano MT200 wheels wrapped in Vittoria Barzo tyres. SR Suntour Suspension Forks and Shimano Deore 1x11 Drivetrain Soaking up every impact, this brilliant version uses SR Suntour XCR-RL-R forks with 120mm of terrain-taming travel to keep you riding with confidence. GT has also gone the extra mile with this model by installing an 11-Speed Shimano Deore drivetrain with a wide-ranging cassette to give you fast acceleration and dependable shifting performance. What's most impressive is its Tektro hydraulic disc brakes keep you in full control of the ride even on the most challenging of terrain conditions in the wettest of weather conditions. Built, Tuned and Ready to Ride Rest assured that each bike is fully built and tuned by Wiggle's team of qualified bike mechanics to ensure your bike arrives in perfect condition. We supply all bikes with a set of plastic pedals, a pedal wrench and a multi-tool kit. Find out which size fits you by clicking the size chart tab.
Classed as an ultra-lightweight cross country (XC) weapon, this mountain bike (MTB) suspension fork features Fox Suspension's prestigious Step Cast chassis. Its Step Cast design offers a pioneering lower leg shape that isn’t just for looks, its narrow stance and stepped design saves weight, decreases frontal area, and provides clearance for the spokes and brake rotor. Ready for the most demanding of XC racing situations, this version is also kitted out with a lightweight Float EVOL air spring and a FIT4 damper with quick on-the-fly three-position adjustment. As a result, you can easily fine-tune your front-end suspension to match your riding style as well as the terrain conditions. Part of the brand's renowned Factory Series, this model comes complete with a genuine Kashima finish on its upper tubes for slippery smooth, ultra-durable performance as you race for the podium. FIT4 3-Position Damper In its fourth generation, Fox Suspension's patented FIT4 closed cartridge system provides three on-the-fly compression damping positions (Open, Medium, and Firm) to adapt to varying trail conditions. Factory Series forks feature an additional 22 clicks of low-speed compression adjust in the Open mode, allowing riders to fine-tune their exact damping preferences. Lightweight Float EVOL Air Spring This model's Float EVOL air spring automatically equalises the positive and negative air chambers for increased sensitivity and traction, regardless of the air pressure setting. Riders can fine-tune the characteristics of the positive air spring by using volume spacers. Technologies: Factory Series: “Factory” says it all – feature-packed and designed to exceed the demands of Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. Adjustments: Three on-the-fly compression damping positions Open, Medium, Firm. Additional low-speed compression (Open mode adjust) 22 clicks. Low-speed rebound 10 clicks. Lightweight FIT4 Closed Cartridge System: Lightweight version of Fox Suspension's patented FIT4 closed cartridge system. The weight-optimised design uses a detailed aluminium piston, intricate material removal and consolidated parts design to make it lighter. Narrow Chassis: The chassis is 10mm narrower than the typical 32 design. Shorter Upper Tube Length: The shorter upper tube length raises the floor of the magnesium lower leg, creating a hollow lower section and a lighter overall system. Manufacturer's Part Numbers: 910-20-230 Black 27.5 KB100 100mm 44mm 910-20-222 Black 29 KB110 100mm 44mm 910-20-221 Black 29 KB100 100mm 51mm 910-20-220 Black 29 KB110 100mm 51mm 910-20-219 Orange 29 KB110 100mm 44mm 910-20-218 Orange 29 KB110 100mm 51mm 910-20-223 Black 29 KB100 100mm 44mm
With a maximum pressure of 160psi, its sturdy steel base improves stability while its steel barrel allows you to pump efficiently. Ideal for use at home or keeping in the boot of your car, it also includes a large and easy to read top-mounted pressure gauge.
Ready for everything from backroad adventures to XC racing, this versatile dropper seat post is engineered for performance. It's part of Fox Suspension's prestigious Factory Series that's World Cup proven and includes the best-of-the-best technology, so you can stay in full control wherever your next ride takes you. Coming equipped with a genuine Kashima upper coating, it provides buttery smooth, ultra-durable operation, while its anodised lower coating delivers extra protection against wear and corrosion. Another highlight is its coil spring, internal cable routing and travel configuration options that are specifically developed for the rigours of gravel riding and cross country. Keeping its weight as low as possible, this Factory Series version also comes complete with titanium hardware for a further 10g of weight savings. Super Lightweight Dropper Seat Post Meet the Transfer SL. At 128 grams (25%) lighter than the regular Transfer post, Fox Suspension has classed it as the lightest mainstream dropper post on the market. Period. With lever options for flat bars, drop bars, and 1x and 2x drivetrains it finally brings the word “shred” into the super-lightweight XC and Gravel conversation. Technologies: Factory Series: “Factory” says it all. The best-of-the-best technology Fox Suspension have to offer is available in Factory Series models with a buttery smooth, ultra-durable Genuine Kashima Coat. These products are World Cup proven. - Windows in lower post allow cable clamp/slack to be pulled from post side for compatibility with GRX-style dropper levers and minimises extra cable housing length. - Longer travel configurations offer exposed length of 290mm for taller riders. - Shorter travel configurations offer shorter total length for smaller riders. - Coil spring for consistent return performance. - 70-85 degree seat angles are supported. - 7mm and 7x9mm saddle rails supported. - Compatible with 1x lever, which is Matchmaker, Shimano GRX, and I-SPEC EV compatible. (Sold separately). - Factory post includes Ti hardware for additional 10g weight savings. - Internal routing only. - Lightweight design. Manufacturer's Part Numbers: 925-01-201 Black 350mm 27.2 x 50mm 925-01-200 Black 370mm 27.2 x 70mm 925-01-206 Black 355mm 30.9 x 75mm 925-01-204 Black 380mm 30.9 x 100mm 925-01-207 Black 355mm 31.6 x 75mm 925-01-205 Black 380mm 31.6 x 100mm
Nukeproof use 100% recycled S.Café fabric for their Blackline Jerseys. This fabric is made by combining coffee grounds (which are created from our everyday coffee drinking) with 100% recycled yarn. Not only are you being eco-friendly but due to the advanced properties of S.Café you'll benefit from enhanced moisture management for a fresh feel all day. S.Café technology also boasts a 200% faster drying time when compared to cotton so you won’t suffer from chills from cold sweat build up. Lastly, with its natural UV protection and an anti-bacterial finish, this is a jersey ideally suited to hitting the summer trails. Practicality isn't overlooked either, Nukeproof have added a side zipped pocket, ideal for small valuables, and with an audio port for headphones, you can stow an MP3 player and enjoy some tunes. With a distinctive design using sublimation and screen printed graphics, you'll have a jersey that looks good for the long haul. Nukeproof Blackline Range Fully designed and developed by The Nukeproof team in Belfast, they use the highest quality fabrics, great MTB inspired cut/fit and have all the features they wanted out of their ride apparel. The Blackline range is their premium trail collection.
Healthy Mind. Healthy Body. The Black Sheep Man Ride range is dedicated to raising awareness of men’s mental illness. It's about starting and broadening the conversation surrounding mental health. It carries within its artwork a number of significant messages about men's mental health. You're invited to join the ride to a healthier mind and body. Supporting your Performance The MR21 Team Bib Shorts from Black Sheep Cycling give a performance fit that supports your hard-working muscles in all the right places. To the legs, 250 gsm CorePower warp-knit compression fabric provides just the right amount of muscle support to fight off fatigue and yet still offers superb flexibility for smooth, powerful pedalling. Meanwhile, to the upper body, the FlexMesh material allows for perfect ventilation for heat regulation, quick sweat evaporation and offers a firm hold over the shoulders without excessive pressure. At the legs, the TOUR TP-Band holds the shorts smoothly and comfortably in place. And then inside, the BSC Men's HP Chamois offers a luxurious level of support for rides of any distance and speed, long, short, fast or slow.
The Aireator 6" Santa Fe Socks are part of a long and proud line of Defeet performance cycling socks. And since the first Aireators appeared little has changed, such has been their brilliance. The slim, breathable construction and Aireator mesh weave combine to offer unrivalled airflow and quick-wicking performance. Minimal seams across both toe and heel prevent irritation and a non-sagging cuff keeps them locked in place for crisp tan lines. Finally, you can rest easy as you put them on knowing they’re made from partly recycled fabric (made from plastic bottles no less), so you’ve done your bit in helping the environment at the same time as you ride.
The Essentials Team Short Sleeve Jersey, here with an exclusive finish, makes full use of the superbly low-weight and luxuriously soft Light Asteroid 2.0 fabric. Weighing a mere 130 grams, this is a jersey you'll soon forget you're wearing. The lightweight feel is also backed up by a flawless fit from shoulder through to waist. It's a snug fit, honed for streamlined performance, but with a comfort level that makes it ideal to be worn all day, every day. An impressive combination of ventilation and sun protection is also achieved with Black Sheep's ultra-light Open Cell Mesh. The mesh is used in high-sweat areas, leaving you feeling more comfortable and in control of your core temperature for longer. And if you’re going to be out there on your bike all day, every day, you need to be protected. UPF30+ will reduce the risk of sun damage to your skin. Essentials Team Collection Essentials. It's Black Sheep Cycling's every day, everywhere, everyone range. The Essentials range is the embodiment of the brand ethos. Garments designed for everyone, heroing cyclists, regardless of who they are, where they are, and how they ride. Black Sheep was born from an implosion of pattern and colour. But at their core, it's a brand all about embracing people and the experiences we all share on the bike.
The Zone3 Compression 2-in-1 Shorts are made using a sweat-wicking woven outer with soft compression undershorts to give extra support, coverage and freedom of movement throughout your workout. The combination of fabrics offers a firm yet soft fit and actively wicks away sweat from your skin to regulate temperature and keep you dry. Comfort is maximised with a 3cm waistband with drawstring cord, flatlock seaming throughout the garment and laser cut hems for additional comfort and style. There is also a heat taped, zipped pocket on the back and an easy-access pocket on the undershorts for storage of keys, nutrition or music devices.
Suited to hitting jumps, throwing tricks and clearing gaps, this frame is engineered for exceptional performance with 26" wheels, up to 140mm fork travel and is disc brake compatible only. With alloy construction, modern slack and low geometry and 2.5" max tyre clearance, this frame is the ultimate fun machine. Aluminium Frame for Dirt Jump and Slope Style Riding The Zircus is an aluminium all-around dirt frame perfect for playing in the city and off-road. It’s a lightweight and strong aluminium frameset with ‘Pro’ dirt jump geometry designed to fit 26” wheels, forks with 80-140mm travel and a single-speed drivetrain. However, the frame is compatible with a derailleur hanger (sold separately) so you can convert the bike into a serious all-purpose off-road machine with gears if needed. Designed for riders who prefer the feel of aluminium frames. More slack and stabile than the radical steel Void frame. The Bottom Bracket (BB) is lowered for more stability, the top tube and chainstays are slightly longer than those in the Void and the head tube angle is slacker. Tough enough for jumps, perfect for pump tracks, comfortable enough for trail riding. Stable, Agile and Stylish Hardtail Freestyle Frame The Zircus uses beefy AL-6061 tubes that give it a super clean look. Behind the simple looks you can find nice tech details such as custom shaped and butted tubes (a very strong DT near HT area with no need for an additional external gusset), a new custom shaped fully integrated tapered head tube, custom rounded smooth looking tubes and sweet arched seat stays bridge that gives lots of tyre clearance. This frame is all that you will need to rip like a pro in any terrain. Although the Zircus is a very strong frame it weighs only 2.1kg and has a very reasonable price.