E Thirteen LG1 Race Carbon CranksetThis mountain bike (MTB) crankset features two compacted carbon fibre crankarms for a superior strength to weight ratio as you weave your way from trail to trail. Its carbon build also delivers increased stiffness and strength, without adding any unnecessary excess grams to your ride. Another highlight is e.thirteen has kitted out this model with an additional 3K carbon finish that's added to the front and rear faces for greater impact resistance.Carbon MTB Crankset with Adjustable ChainlineWorld Cup proven for years, and in contrast to e.thirteen's Gen3 carbon cranks, the Q Factor, overall profile, and volume of these Gen4 cranks has been greatly reduced. The spindle has been moved to the non-drive side for easier chainguide setup and drivetrain maintenance. Its adjustable chainline accommodates non-Boost, Boost, and Super Boost setups. Finally, all cranks now include an 8mm self-extractor.Features: Crankarm Material: Carbon Fibre with 3K finish Use: MTB Spindle: Width: 73mm; Diameter 30mm, Interface P3 Connect Compatibility: All frames with 73mm BB shell Compatible Chainring: SL Chainring (-8mm offset) Number of Chainrings: 1 Included: Crankset, APS Adjuster, Installation Tools, Crank Boots (x2), Sticker, User Manual Bottom Bracket Included: No, available separately Chainring Included: No, available separatelyManufacturer's Part Number: E13CR2007 Black 165 x 73mm E13CR2008 Black 170 x 73mm E13CR2009 Black 175 x 73mmBuy E Thirteen Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Coming equipped with two compacted carbon fibre crankarms, this mountain bike (MTB) crankset, offers a superior strength to weight ratio as you weave your way from trail to trail. Its carbon build delivers increased stiffness and strength, without adding any unnecessary excess grams to your ride. e.thirteen has also kitted out this model with an additional 3K carbon finish that's added to the front and rear faces for greater impact resistance. Carbon MTB Crankset with Adjustable Chainline World Cup proven for years, and in contrast to e.thirteen's Gen3 carbon cranks, the Q Factor, overall profile, and volume of these Gen4 cranks has been greatly reduced. The spindle has been moved to the non-drive side for easier chainguide setup and drivetrain maintenance. Its adjustable chainline accommodates non-Boost, Boost, and Super Boost setups. Finally, all cranks now include an 8mm self-extractor. Manufacturer's Part Number: E13CR2007 Black 165 x 73mm E13CR2008 Black 170 x 73mm E13CR2009 Black 175 x 73mm
The Clutch Hub is a traditional clutch-based coaster hub design that eliminates all of the problematic elements on ordinary hubs and only keeps the parts that work. A new, super-strong Full 14mm axle, bearing configuration, and drag mechanism design stops the need for constant repairs. Equipped with external slack adjustment, which can be done with a 2.5mm hex key through a hub shell access hole (can be adjusted without removing the wheel), and an improved plastic hub guard spec. The Clutch V2 is laced to the G-Sport Ribcage Rim. At 500 grams, the strength to weight ratio of the Ribcage cannot be matched. The entire design revolves around the use of a proprietary high strength aluminum alloy made specially for&G-Sport in an on-site foundry. It is a lightweight rim that can take anything you throw at it. With the Ribcage, the spoke holes are re-enforced with patented ribs that support the sides of each spoke nipple and eliminate the possibility of nipple pull through under even the highest loads. The rim also features cross-over-spoke lacing, where each spoke goes from one side of the hub to the opposite side of the rim for an increased angle and therefore increased lateral strength. The outer walls are extra thick to protect against case dents, while the other walls are extra thin to keep it light. The 36mm width and 18mm height are also major factors in the design, spreading out the impacts and maximizing resistance to pinch puncturing. ###section### Product Specs WHEEL SIZE: 20" HUB: Odyssey Clutch V2 Freecoaster AXLE: 14mm Chromoly Male DRIVE SIDE: Right Side Drive RIM: G-Sport Ribcage SPOKES: Butted NIPPLES: Brass WEIGHT: 1389g / 49oz
Zipp’s SL Speed stem represents the essence of carbon componentry. It’s stiff, secure and light weight with a sleek design that compliments any bike. It’s a perfect addition to a mountain climber’s favorite feather-light road bike, but it’s tough enough to tackle gravel and cyclocross. Designed using SRAM Exogram™ technology, found in SRAM RED cranks, the new SL Speed Stem weighs just 123g (100mm) while exceeding our stiffness-to-weight standards. The SL Speed is available in six sizes ranging from 70 to 120mm to meet any rider’s fit needs. Includes stiff aluminum faceplate and titanium hardware Torx® T25 heads for precise torque readings and ease of adjustment. Features Updated distinctive Zipp cosmetics Designed using SRAM Exogram™ technology New SL Speed Stem weighs just 123g (100mm) ±6° carbon stem Secure with four bolt faceplace using Torx© T25 bolt heads Matte Black finish Lifetime warranty Zipp Quickview integrated mount available separately
SRAM Rival 22: Rival Your LimitsYour needs aren't less demanding. They're different.The new SRAM Rival 22 groupset delivers immense performance across a broad variety of bikes and disciplines. Paved or not. Cyclocross or triathlon. Road racing or unchartered journeys. Rival 22 gives the ergonomics, efficiency and technology for finely tuned cyclists to meet each challenge and expand their limits.Dedicated cyclists' demands are different - not less than - the pro's. Their demands change and evolve with their riding and performance, whether they're race ready or adventure ready. So why settle for a group that's simply ratcheted-down to 75 percent of what the pros ride? Rival 22 delivers 100 percent of what cyclists demand.Modeled after best-in-class SRAM RED 22 shifters,ErgoFit, using the same ergonomic design from SRAM RED 22 for textured body improves grip and finger wrap,Individual Reach Adjust of brake lever and shift paddle,Forged aluminium brake lever and shifter paddle,Lightweight at 332g a pair.
100% Aircraft Carbon DH/BMX Helmet (Raw 2) (Aircraft 2)As used by the likes of Sam Hill, the 100% Aircraft Carbon DH/BMX Helmet (Raw 2) (Aircraft 2) has evolved to deliver you the finest level of comfort and protection when you're pushing your mountain bike riding beyond limits. There's nothing better than taking on ever more challenging MTB trails and features. Coming out smiling after having nailed the landing of a big booter, laid it over low as you whip around a massive berm or conquering the fear of a North Shore style drop. However, along the way, crashing is an inevitable part of your progression. And here the super-protective Aircraft Carbon DH/BMX Helmet works best when things go wrong. The core of the Aircraft's protection, both figuratively and literally, is Multi-Density EPS foam. This shock-absorbing centre takes the energies from a head impact and soaks them up to prevent injury. This core is covered by a super-light and super-tough and durable Carbon Fibre shell. This fends off those bumps and bruises from overhanding tree branches and minor falls. It also keeps your lid looking good when it's getting almost daily (ab)use. Next comes the 14-point Smartshock® Rotational Protective System. Smartshock® Rotational Protective SystemWhile most standard cycle helmets are great at dealing with straight-on impacts, oblique, angular impacts are in fact more likely to occur. These create rotational acceleration and deceleration forces to the head and brain.The Smartshock Rotational System combats those extra forces via a suspension system seamlessly integrated into the helmet. This innovative fully suspended system through compression of direct impacts while elastomers allow inner and outer to move independently of each other. Both features help reduce energy transfer to the brain over a wide range of speed and impact types.Freshness Engineering InRiding mountain bikes all day is a hot and sweaty business. But the Aircraft deals with moisture via class-leading 20 ventilation ports. Cool air can flow in, while damp and warm air gets ejected out. You'll also find the liner does a great job of minimising sweat build-up, wicking it away before it causes an issue. Being microbial, bacteria can't thrive either - no stinks and no itchiness here. And for extra freshness, the liner is washable too. A multi-point Visor lets you adjust it easily to accommodate almost any goggle shape and size as well as making goggle storage easier. A tried and tested D-Ring buckle is also used for a secure and safe closure every time you ride.Features:Carbon Fibre shell with Patent Pending injection-moulded chin bar integrationSmartshock® Rotational Protective System (14-point)Multi-Density EPS foam injection-moulded with polycarbonateMassive airflow with a class-leading 20 ventilation portsMulti-point adjustable visor designed for maximum vision and goggle stowageWashable, moisture-wicking anti-microbial linerD-Ring buckle for maximum securityThe Aircraft 2 is tested and certified according to CE (EN 1078:2012+A1:2012)Buy 100% Protection from Chain Reaction Cycles, the World's Largest Online Bike Store.
There's nothing better than taking on ever more challenging MTB trails and features. Coming out smiling after having nailed the landing of a big booter, laid it over low as you whip around a massive berm or conquer the fear of a North Shore style drop. However, along the way, crashing is an inevitable part of your progression. And here the super-protective, but lightweight, Aircraft Carbon DH/BMX Helmet works best when things go wrong. The core of the Aircraft's protection, both figuratively and literally, is Multi-Density EPS foam. This shock-absorbing centre takes the energies from impacts and soaks them up to prevent head injury. This core is covered by a durable polycarbonate outer, keeping your lid looking good when it's getting almost daily (ab)use. Next comes the 14-point Smartshock® Rotational Protective System. Smartshock® Rotational Protective System While most standard cycle helmets are great at dealing with straight-on impacts, oblique, angular impacts are in fact more likely to occur. These create rotational acceleration and deceleration forces to the head and brain. The Smartshock Rotational System combats those extra forces via a suspension system seamlessly integrated into the helmet. This innovative fully suspended system through compression of direct impacts while elastomers allow inner and outer to move independently of each other. Both features help reduce energy transfer to the brain over a wide range of speed and impact types. Freshness Engineering In Riding mountain bikes all day is a hot and sweaty business. But the Aircraft deals with moisture via class-leading 20 ventilation ports. Cool air can flow in, while damp and warm air gets ejected out. You'll also find the liner does a great job of minimising sweat build-up, wicking it away before it causes an issue. Being microbial, bacteria can't thrive either - no stinks and no itchiness here. And for extra freshness, the liner is washable too. A multi-point Visor lets you adjust it easily to accommodate almost any goggle shape and size as well as making goggle storage easier. A tried and tested D-Ring buckle is also used for a secure and safe closure.
Power your Campagnolo Record and Super Record EPS groupset with this Campagnolo V3 power unit. In this latest slimmed down version, it sits comfortably on the inside of any frameset or seat post and weighs just 106 grams. Additionally, without any clumsy wires or junction boxes to contend with, the V3 keeps the lines on your bike looking sleek and race-ready. Despite this reduction in size, all the functionality remains. Equipped with DTI intelligence, the V3 power unit receives, transmits and processes data signals from both shifters and derailleurs thousands of time per second to ensure a quick, reliable shift. To combat against worst weather conditions, the even comes with an ultra-sonic seal to ensure this unit is 100% waterproof and very reliable. Campagnolo V3 Power Unit Compatible with Super Record and Record EPS groupsets Fits inside almost any frame or seat post shape DTI intelligence receives, transmits and processes data for quick shifting 100% waterproof Weighs just 106 grams
A Lightweight and dependable Pro XXL sized BMX race bike best suited to adult riders who are looking for affordable Race bike to get them around the track fast. The Pro XXL sizing is best suited to adult riders over 6ft or those who feel they need a little more room on the bike. The Accelerator is built around a lightweight and durable 6061 heat treated Aluminum frame with Race specific geometry, reliable integrated headtube and a striking decal package. The parts package easily out-performs the price tag and boasts sealed bearings throughout, Tough Cr-mo handlebars, and Tubular 3-piece cranks to transfer maximum power while maintain an excellent strength to weight ratio. The whole package sits comfortably on a set of fully sealed, full size 1.75” wheels with double wall 36 spoke rims and Race specific 1.75” tires. Like with all Jet’s, all the components use standard BMX sizing so swapping out parts for after-market parts won’t be an issue. If you’re an adult looking for an entry point into BMX racing or a race bike to tear around the local track or pump track then this is for you. ###section### Product Specs FRAME MATERIAL: 6061 Aluminum WHEEL SIZE: 20" TOP TUBE LENGTH: 21.75" CHAIN STAY LENGTH: 391mm HEAD TUBE ANGLE: 73° SEAT TUBE ANGLE: 71° FORKS: Hi-Ten Steel BARS: Crmo 8.5” Rise STEM: Alloy 50mm top load HEADSET: Integrated 1-1/8” BRAKE MOUNTS: Welded V-Mounts BRAKES: Alloy V-Brake FRONT HUB: Sealed Bearing 10mm FRONT RIM: 36 hole Double Wall REAR HUB: Sealed 10mm with 16t Freewheel REAR RIM: 36 hole Double Wall TYRES: Arisun 1.75” SPROCKET: 44t Spider CRANKS: Crmo 175mm tubular BB: Sealed Euro PEDALS: Nylon Platform SEAT: GEARING: 44/16 WEIGHT: TBC ###section### Product Highlights Pro XXL sized BMX race bike suited to riders who are 6ft (185cm) or more... Or those that just want a bit more room. A BMX race specific bike great for those riders just getting started Lightweight aluminium construction Upgradable with aftermarket parts Integrated headset ###shogun-image-section###
Unique CeramicSpeed ceramic bearings are premium quality, out-performing mark rivals. The CeramicSpeed Ceramic Bottom Bracket system is so stiff and efficient that additional spacers are not required. At a fantastically lightweight of 84g (approx), this CeramicSpeed Ceramic Bottom Bracket is a premium upgrade that your trusty steed deserves.
Radio's Revo line was designed purposely to get younger riders their first taste of the BMX world. Each one is solid, well-designed and ready to go. Every components on the Revo has been carefully selected to create the best starter BMX straight out of the box. Intentionally made so that it's easy to maintain and more importantly easy to upgrade over time. The Revo 16" is a scaled down version of the 20" Revo, this smaller model follows a similar responsive geometry set as their Dice 16" allowing the younger rider to really put the Revo through its paces. Despite its low price point it's packed full of great features like 25/9 gearing, short/responsive pro-inspired geometry, tapered fork blades and an alloy seat post to help shed the grams. ###section### Product Specs FRAME MATERIAL: Hi Ten Steel WHEEL SIZE: 16" TOP TUBE LENGTH: 16" CHAIN STAY LENGTH: 11.2" HEADTUBE ANGLE: 75° SEAT TUBE ANGLE: 71.5° FORKS: Radio "Rookie" 16" bar, Hi-ten BARS: Radio "Revo" 16" Bar, Hi-ten STEM: Salt Junior Top Load 40mm HEADSET: FSA A-Headset Looseball BRAKE MOUNTS: Welded BRAKES: Radio AM U-Brake FRONT HUB: Radio Rookie Steel Looseball FRONT RIM: Salt AM Single Wall 28H REAR HUB: Radio Rookie Steel Looseball 9T Cassette REAR RIM: Salt AM Single Wall 28H TYRES: Salt 16 x 2.2" Strike Tyre SPROCKET: Radio Rookie 25T Steel CRANKS: Radio Rookie 1-piece 127mm BB: USA Looseball PEDALS: Radio Junior Nylon SEAT: Radio Century Railed GEARING: 25/9 WEIGHT: 9.95kg (21.94 lbs) ###section### Product Highlights Smaller 16" wheels - The perfect fit for for 5-8 years olds (3ft - 3ft 6"/90cm - 105cm) Specifically designed for the smaller rider, just starting out in BMX Traditional BMX geometry Geometry designed with the smaller rider in mind Strong Hi-ten steel construction ###shogun-image-section###
Made from 4130 chromoly tubing with a heat-treated integrated headtube that’s extra tall to eliminate the need for headset spacers, gyro tab holes, a double-butted top and downtube with Subrosa logo gussets, heat-treated Mid BB shell, seatstay bosses for removable U-brake mounts (sold separately), all new custom designed Subrosa wishbone junction and 6mm thick heat-treated dropouts. The wishbone/ yolk is the biggest addition to the version. It’s a custom designed cast piece that allows clearance for the widest tyres on the market while adding a ton of side to side strength to the rear end. ###section### Product Specs MATERIAL: 4130 chromoly, double butted top tube and down tube HEAD TUBE ANGLE: 75° SEAT TUBE ANGLE: 71° CHAIN STAY LENGTH: 12.9″-13.7″ BB HEIGHT: 11.7” WHEEL SIZE: 20" STANDOVER HEIGHT: TBC DROPOUT SIZE: 14mm HEADSET TYPE: Intergrated BB TYPE: Mid BRAKE MOUNTS: Removable (Sold separately) GYRO TABS: Removable (Sold separately) WEIGHT: 5.45 lbs (20.5″) ###section### Product Highlights Responsive Geometry with Short Backend and Steep Headtube Best suited to Street and Park riding High-quality Chromoly construction Signature model frame Removable brake hardware (Brake hardware not included) ###shogun-image-section###