Suitable for use with Truvativ chainrings, this SRAM PC 971 9 speed chain features nickel-plated outer plates and gray inner plates to keep your 9 speed setup as crisp and competent as can be. Equipped with chrome-hardened pins, each of the 114 links works hard to keep you running efficiently and effectively. PowerChain II Extremely strong. Incredibly precise. SRAM's PowerChain II increases front and load shifting performance without sacrificing rear shifting precision. The Step2 riveting process increases the Push Pin Power for increased strength and durability.
The SRAM XG1150 mountain bike (MTB) cassette has eleven stamped steel sprockets that are held together with 123 high-strength stainless steel pins. This results in a light, durable cluster providing you excellent shifting performance. It also has optimised gear steps across its entire range. Cassette Ratios: 10-42T: 10,12,14,16,18,21,24,28,32,36,42T
SRAM's X5 9 Speed Gear Shifter provides a high-end feel at a low-end price and is a solid, reliable performer that will always perform well no matter how rough the trail gets. It's even been race proven at World Cup DH events, so despite its entry level price point, you can be sure you've still got the same performance and technologies that are enjoyed by the Pros. Weight: 260g - Lightest in Class
A variant of the external bottom bracket, this SRAM BB86 GXP PressFit bottom bracket cuts weight and provides easier installation by allowing you to press the bearing cups into the frame instead of threading them. There's no change to the crank - spindle length and diameter remain the same. Technologies: GXP: Other systems rely on side-loaded bearings to eliminate play, causing bearing wear. GXP captures the left-side bearing between the spindle and the left crankarm and allows the drive-side bearing to float axially on the spindle. There's no need to side-load bearings during adjustment. No excess wear and much simpler installation. Just tighten to the proper specifications and you're ready to roll, worry-free. GXP's two bicycle-specific cartridge bearings and eight seals ensure a smooth, long-lasting ride. SRAM's Gutter seal system takes a two-stage approach in directing contaminates away from the bearings providing longer bearing life. GXP’s Gutter Seal design also reduces friction, 35% less drag than previous versions, improving rider feel and performance. Gutter seal system has deeper installation tool grooves which provide stability and support while applying torque to the adapter cups. SRAM'S design and material choice have dropped 15g out. PressFit cuts weight. Easier installation by allowing you to press the bearing cups into the frame. GXP compatible. Easy installation. ISO 4210 compliant. See Declaration of Conformity for details. Manufacturer's Part Number: 00.6415.033.020 Black 92mm - MTB Hollowtech Eng 00.6415.033.000 Black BB86 - Road
This stunning 12 speed rear mech is specifically designed for MTB use as it brings you the shifting performance you need to thrive on the trails. Its proven SRAM 1x-specific X-HORIZON design easily facilitates 11-50T and 10-50T cassette capacities for quieter and more consistent gearing. To top it off, it provides you with some of the finest industry-changing technologies at an affordable price. Technologies: Cage Lock: With Cage Lock technology in the rear derailleur, wheel removal and installation, as well as chain installation, becomes faster and simpler. Just push the cage forward to create slack and lock it into place X-Actuation: Developed specifically for SRAM 1x drivetrains, X-Actuation keeps shifting sharp and consistent across the entire cassette. This makes gears easy to index and provides exceptional performance. X-Sync: X-Sync Eagle is the next evolution of SRAM X-Sync technology. The aggressive tooth design provides better chain retention for a smoother, more efficient pedal feel. With a focus on long wear-life, the X-Sync Eagle design reduces friction and the accumulation of mud, grit and grime. X-Horizon: The X-Horizon ‘straight parallelogram' design limits all movement on the horizontal axis, which makes ghost shifting impossible while also reducing shift force. The large upper pulley offset design maintains a constant chain gap across all gears and guarantees faster and more exact shifting.
Gutter Seal Technology drastically improves sealing against the elements while reducing seal drag. SRAM also designed a fresh cup forging for a high-end look. The SRAM GXP team bottom bracket sets a new standard in external bearing performance. Technologies: GXP: Giga X Pipe External Bottom Bracket Bearing Assembly. While other systems rely on side loading the bearings to eliminate play, which causes premature bearing wear, the GXP system is different. The GXP system captures the left side bearing between the spindle and the left crank arm while allowing the drive-side bearing to float axially on the spindle, thereby eliminating the necessity to side-load bearings during adjustment. The simplicity of installation is refined: once it is tightened to the proper specifications you are ready to roll with a worry free BB. The GXP system uses two bicycle specific cartridge bearings and eight seals for a smooth and long-lasting ride.
This ultra-durable chain comprises of 114 links with chrome plating on the inside of each link and a nickel coating on the outside, giving unrivalled durability as you clock up the miles. With chrome hardened pins holding each link in place and Flattop technology allowing for a narrower design and improved clearance between your chain and the cogs, a proficient and precise shifting experience is assured. The SRAM Red AXS 12 speed chain was redeveloped from the ground up. The unique link shape allows the chain to be narrower and lighter while increasing strength and providing more space between the outer plates of the chain and the cogs on either side. Result: a quieter chain with faster, more precise shifts.
Offering simplicity, strength and durability, this chainring powermeter kit meets the demands of competing time trial and triathlon riders. It features a robust aluminium construction that's also CNC-machined, so riders can benefit from its fantastic strength to weight ratio on every training session. SRAM has integrated the powermeter into this direct mount chainring, so you can enjoy its tighter gearing range that's perfect for racing and areas with flatter terrain. Coming equipped with Quarq DZero power measurement, you'll also enjoy its accurate readings within +/-1.5% that aren't affected by climate conditions during a ride. - AXS enabled for easy monitoring and firmware upgrades - Single-ring drivetrain simplifies functionality - Fully integrated power meter into a direct mount aero chainring - Power readings are accurate within +/-1.5% and aren't affected by climate conditions during a ride - Power balance measures left and right legs separately - SRAM X-SYNC wide-tooth, narrow-tooth chainring technology provides maximum chain control - Laser-etched chainring finish is more durable - 8-bolt direct mount compatibility only to new RED and Force eTap AXS cranks Technologies: AXS: AXS is SRAM's bike component integration system that connects electronic bicycle components and software. This SRAM AXS app allows riders to see battery status, change component behaviour, personalise controls, get maintenance reminders and update firmware. X-SYNC: SRAM X-SYNC chain rings provide the highest level of performance and durability. The SRAM X-SYNC™ tall square teeth edges engage the chain earlier than traditional triangle shaped teeth. The sharp and narrow tooth profile, as well as rounded chamfer edges, help manage a deflected chain. To provide the best possible performance in muddy conditions, the X-SYNC™ chain rings have been designed with mud-clearing recesses for the inner chain links and rollers. Engineered in Germany, X-SYNC™ rings are an integral part of the SRAM 1x™ drivetrain. DZERO: The Quarq platform for powermeters, DZero, is certified according to the DZero experiment, one of the most accurate and innovative Projects of science to study subatomic particles moving at the speed of light. With a new measuring circuit, a revised DMSDesign, improved accuracy throughout the entire Pedal rotation and software progress represented DZero represents the state of the art in power measurement technology.
The SRAM Code RSC has larger fluid reservoirs and pistons and delivers massive amounts of power, reliable modulation, and unrivalled heat management for those extended descents and regular "drop the anchor" moments. Special Features: Tool-free Reach Adjust, Contact Point Adjust, Piggyback Reservoir, MatchMaker X compatible Pad/Holder: Top-loading Intended Use: AM/DH/FR System: Open System Rotor Sizes: 140 (rear), 160, 170, 180, 200,203mm (sold separately) Tri-Align Caliper Positioning System: No Tool-Free Pad Replacement: Yes Bend Zone™: Yes Ambidextrous: Yes Stainless Hardware: Yes Please note: Centerline rotor NOT included Technologies: Contact Point Adjustment™: Some people like the instantaneous power of a short lever throw. Others prefer the feel of a longer throw. With Contact Point Adjust, you can pick the position you want your fingers to be in when your brakes are engaged. It’s a quick and easy way to customize the feel of your brakes without having to move the pads. It’s also a way to balance both brake levers to feel exactly the same. MatchMaker and MMX Compatible: Save weight and clutter on the bar with Matchmaker. It holds Avid levers, SRAM® triggers, and various RockShox® controls, all with one tidy, light, clamp--a dream come true for handlebar component footprint conservationists the world over. Available in two versions: Matchmaker™ X integrates the RockShox®XLoc and is compatible with XX and X0 brakes. Standard Matchmaker™is also available and works with any split-clamp design and RockShox® PushLoc. PiggyBack™ Reservoir: The brake fluid reservoir on SRAM’s latest lever design is optimized for both performance and ease of use. The PiggyBack Reservoir offers a simple, failsafe way to manage brake fluid, and also allows for ambidextrous lever placement—so you can switch your levers on the handlebar and run them moto-style without hassle PURE™ Bladder: SRAM’s new brake lever design includes a reshaped bladder, called Pure, that helps regulate and reduce air bubbles. The bladder is specifically shaped to evacuate air from the lever and push the fluid exactly where it’s needed. The result is improved back-pressure relief, which produces dependable braking power and consistency Reach Adjust: Brake lever fit and feel is a personal thing. Riders have individual positioning preferences, as well as unique hand sizes and finger lengths. Reach Adjust makes it easy to adjust your lever for maximum one-finger control for everyone. SwingLink™: Squeeze a new SRAM brake lever and you notice it immediately. Less deadband. More positive pad engagement. A new cam system requires less lever throw to push the pads toward the rotor. That’s great, but there’s more to perfect braking performance than just power. You need control. Many brake systems minimize deadband—but at the cost of modulation. SwingLink solves that with its special cam shape. When the pads contact the rotor, power is modulated, avoiding that “on/off” brake feel. It’s the perfect balance of power and precision. TPC Plus™ (Timing Port Closure): A hydraulic brake’s timing port is the connection between the reservoir and the master cylinder bore. When the lever is squeezed, a cup seal passes this area and closes the port, which pressurizes the system. SRAM’s new timing port closure system, called TPC Plus, features durable seals and an ultra-smooth cylinder bore finish producing dependable braking power and consistency.
Perfect for replacing the chain connector link that came originally with your chain or for keeping as a spare. Genuine SRAM spare part.
This SRAM PC870 8 speed chain is an equally smooth operator on city bike paths and country trails. Thanks to its hard-wearing construction with a nickel-plated finish, this model offers excellent strength and durability for a wide range of riding disciplines. SRAM is passionate about cycling, loved by riders who live and breathe bicycles. To real cycling enthusiasts, there is nothing more gratifying than achieving the ultimate ride - the best part is SRAM just keeps making it better. Technologies: PowerChain II: Extremely strong and incredibly precise, SRAM's PowerChain II increases front and load shifting performance without sacrificing rear shifting precision. The Step2 riveting process increases the Push Pin Power for increased strength and durability Manufacturer's Part Number: CN-870-A1