Genuine Vitus spare parts.
Featuring an ultra-strong T700/800 monocoque carbon fibre construction, this mountain bike (MTB) frame offers fantastic stiffness and durability without weighing down your ride with unnecessary excess grams. Nukeproof has also equipped it with a Factory Series Fox Float X rear shock for smooth and consistent rear end suspension performance, as you charge across rock gardens, tree roots and debris. Another highlight is its updated geometry with internal cable routing, which allows you to benefit from trail-ready handling and control with a clean, sleek finish. Coming complete with 148x12mm Boost rear hub spacing for increased stiffness and strength, this is a perfect choice of upgrade for completing your full suspension MTB bike build. From concept through to design, the Kinematics, the geometry and specification; the Reactor is designed from the ground up to be the ultimate aggressive trail bike. It is at home on technical climbs, but happiest when thrashing the most technical trails you can point it at. Full Suspension Carbon MTB Frame To optimise the weight, strength and stiffness, the Reactor Carbon frame features a full UD woven carbon fibre frameset (Including chain and seat stays). It is available for 27.5” or 29” wheel sizes. These are two totally different, compromise free frames that were designed and developed at the same time. Each frame is simply tailored around each wheel size. Speed or play: which do you value more? The manoeuvrability of 27.5” or the raw speed of a 29”? Adjustable Geometry All Reactor frames feature a “flip chip” to adjust the geometry from “Trail” to “Rail mode”. Trail – As the name suggests, this setting is best suited for trail riding. It is for riders who get as much enjoyment from the climb as the descents. Rail - The Rail setting turns the Reactor into a corner shredder, dropping the bottom bracket 6mm and slackening the head angle by half a degree. It is there to maximise the descending capabilities. Suspension Design To ensure the bike could climb as well as it descends, Nukeproof designed the four bar horst linkage to have higher levels of anti-squat for climbing gears but lower levels when you drop down the cassette. This means that the bike can behave itself on the climbs but when you get it up to speed, it turns into a trail hooligan. The combination of low anti-squat and progressive rate give ultimate small bump compliance (removes rough trail and root chatter) with good mid-stroke support for cornering/pumping and end stroke progression for aggressive riding. Balanced anti-rise figures allow the Reactor some squat when braking hard, maintaining rider position and providing a good amount of pressure through the tyre to ensure traction. The Reactor is designed to reward the rider and ensure you get that stoke factor in on any ride. Features: Material: Ultra Strong T700/800 Monocoque Carbon Fibre Fork Travel: 150mm Axle to Crown: 564mm Fork Offset: 44mm Rear Travel: 130mm Wheels Size: 29" Max Tyre Size: 2.6" Recommended Shock Sag (Measured seated): 30% Shock Size: 210x50mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Sizing Options: M/L/XL Headtube: 44-56mm Tapered Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 Bearings Required: 2x (6902 2RS), 4x (6800 2RS), 4x (6901 2RS) Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 36.4mm Bottom Bracket: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: SRAM Maxle Stealth M12x1.75 180mm (Thread Length 20mm) Chain Guide: ISCG05 Brake Mount: 180mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Specification: Frame: Nukeproof Reactor 290 Carbon, 130mm Travel, UD woven Carbon Fibre frame Internal cable routing ISCG05 mount Enduro bearings Threaded 73mm BB Boost 148mm rear axle spacing 3D contoured Rubber frame protection Two-position adjustable Flip chip system Shock: Fox Float X, Factory Series, Kashima, 3 Position, EVOL LV, Custom CM+, RM, Rezi LM tune, 210x55mm, Bearing End, 1x 0.2 spacer fitted Headset: Nukeproof, 44-56 IITS Weight: 3.5Kgs/7.7lbs (Medium option)
Genuine Vitus replacement frame spares.
Short Travel Full Suspension Frame The Vitus Rapide FS is a bike built with speed and performance in mind. This short travel 100mm ripper makes short work of climbing to the top of the mountain, snaps around the singletrack, and dances down the trail. This bike combines speed and fun and proves that bigger travel does not always mean better days out. Ideal for Cross Country and Trail Centre Riding This model has become a staff favourite for anything between the flowy trail centres and natural features, making you challenge yourself and demand more. Climbing hills start to become as enjoyable as the reward at the top with heaps of self-satisfaction.
The Megawatt Motor Bolt kit is to replace all six motor mounting bolts on the 2021-2022 Megawatt frames. The bolts are part 33 in the exploded diagram here.
Coming kitted out with a robust 6061 aluminium build, this mountain bike (MTB) frame offers exceptional strength and durability to guide you through the most demanding of terrain conditions. Nukeproof has also put this model through a hydroforming and triple-butting process for additional toughness as you charge from trail to trail. Another highlight is its updated geometry that includes internal cable routing for the best combination of comfort and control as well as a clean, sleek finish. Coming complete with 148x12mm Boost rear hub spacing for increased stiffness and strength, this rugged aluminium frame is engineered for the demands of modern enduro racing. For over 12 years, Nukeproof's best-selling model; the Mega has been racking up awards on Enduro stages and in the press around the world. With four Enduro World Series titles to its name, the Mega has become an icon that is synonymous with racing. Since 2009 the Nukeproof Mega has been on a constant development to meet the demands of Nukeproof's riders and customers alike. As a result, the Mega Alloy V4 frame is available for 27.5”, 29” or new Mixed (Front 29”/Rear 27.5” wheel sizes) wheel set ups, with each frame design tailored around each wheel size. Full Suspension Alloy MTB Frame To optimise the strength and weight, the Mega is constructed fully out of T6061-T6 Aluminium including all forged parts. After winning four Enduro World Series Titles in three years the V4 design is an evolution of Nukeproof's ultimate Enduro bike. At the heart of the frame is the brand's revised suspension Kinematic, designed to be more subtle off the top, whilst remaining progressive and predictable. Anti-Squat is used to create an effective pedalling bike that can be thrashed through technical terrain. The useable SAG range is also widened to allow riders to tune the suspension to the trails. Other key features include: · All new aluminium chassis · Designed and improved suspension kinematics · All new geometry · Optimised sizing/fit - Small to XXL · SRAM UDH · Now fits a 750ml water bottle inside the main front triangle! The Mega frame is optimised around the rider and weight distribution. The geometry features dynamic saddle offset. Seat angles are optimised for each frame size and the seat tube itself is designed to take a longer dropper post if required. Please Note: This frame does NOT come with a rear shock. Features: Material: Hydroformed 6061-T6 Triple-Butted Aluminium Fork Travel: 170mm Axle to Crown: 562mm Fork Offset: 37mm Rear Travel: 165mm Wheels Size: 27.5" Max Tyre Size: 2.6" Recommended Shock Sag (Measured seated): 30% Shock Size: 230x62.5mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Frame Sizing Options: S/M/L/XL/XXL Headtube: 44-56mm Tapered Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 Bearings Required: 4x F6802 LLU MAX, 4x 6902 LLU MAX, 2x F6902 LLU MAX-EA Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 34.9mm Bottom Bracket: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: SRAM UDH Maxle Stealth M12x1.0 180mm (Thread Length 13mm) Chain Guide: ISCG05 Brake Mount: 180mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Specification: Frame: Nukeproof Mega V4 275 Alloy, 165mm Travel, custom triple butted hydro-formed tube set Internal cable routing ISCG05 mount Enduro bearings Threaded 73mm BB Boost 148mm rear axle spacing 3D contoured Rubber frame protection Shock: NO SHOCK FITTED - Requires 230x62.5mm size Headset: Nukeproof, 44-56 IITS Weight: 3.87Kgs/8.53lbs (Medium option)
Ready for racing, this enduro-focused mountain bike (MTB) frame comes equipped with a hydroformed and triple-butted 6061-T6 aluminium build for the best balance of strength, durability and performance. Keeping your ride under control as you race across demanding terrain conditions. Another highlight is its race-ready geometry with internal cable routing, which provides smooth handling as well as a clean, sleek appearance. Coming complete with 148x12mm Boost rear hub spacing, this model is a great choice of upgrade for modern racing and for completing your enduro bike build. For over 12 years, Nukeproof's best-selling model; the Mega has been racking up awards on enduro stages and in the press around the world. With four Enduro World Series titles to its name, the Mega has become an icon that is synonymous with racing. Since 2009 the Nukeproof Mega has been on a constant development to meet the demands of Nukeproof's riders and customers alike. As a result, the Mega Alloy V4 frame is available for 27.5”, 29” or new Mixed (Front 29”/Rear 27.5” wheel sizes) wheel set ups, with each frame design tailored around each wheel size. Triple-Butted Alloy Enduro MTB Frame To optimise the strength and weight, the Mega is constructed fully out of T6061-T6 Aluminium including all forged parts. After winning four Enduro World Series Titles in three years the V4 design is an evolution of Nukeproof's ultimate enduro bike. At the heart of the frame is the brand's revised suspension Kinematic, designed to be more subtle off the top, whilst remaining progressive and predictable. Anti-Squat is used to create an effective pedalling bike that can be thrashed through technical terrain. The useable SAG range is also widened to allow riders to tune the suspension to the trails. Other key features include: · All new Aluminium chassis · Designed and improved suspension kinematics · All new geometry · Optimised sizing/fit – Medium to XXL · SRAM UDH · Now fits a 750ml water bottle inside the main front triangle! The Mega frame is optimised around the rider and weight distribution. The geometry features dynamic saddle offset. Seat angles are optimised for each frame size and the seat tube itself is designed to take a longer dropper post if required. Features: Material: Hydroformed 6061-T6 Triple-Butted Aluminium Fork Travel: 170mm Axle to Crown: 582mm Fork Offset: 42mm Rear Travel: 160mm Wheels Size: 29" Max Tyre Size: 2.6" Recommended Shock Sag (Measured seated): 30% Shock Size: 230x62.5mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Sizing Options: M/L/XL/XXL Headtube: 44-56mm Tapered Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 Bearings Required: 4x F6802 LLU MAX, 4x 6902 LLU MAX, 2x F6902 LLU MAX-EA Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 34.9mm Bottom Bracket: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: SRAM UDH Maxle Stealth M12x1.0 180mm (Thread Length 13mm) Chain Guide: ISCG05 Brake Mount: 180mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Specification: Frame: Nukeproof Mega V4 290 Alloy, 160mm Travel, custom triple butted hydro-formed tube set Internal cable routing ISCG05 mount Enduro bearings Threaded 73mm BB Boost 148mm rear axle spacing 3D contoured Rubber frame protection Shock: NO SHOCK INCLUDED, 230x62.5mm required Headset: Nukeproof, 44-56 IITS Weight: 3.87Kgs/8.53lbs (Medium option)
With 140mm rear travel, it's recommended to pair the Escarpe 275 Frame with a 150mm travel fork for a perfect trail bike that'll climb with ease and hold its own when the going gets rough thanks to its modern geometry. Key Features: 6061-T6 double butted Aluminium frame with external cable routing for easy maintenance Aggressive geometry inspires confidence through tough terrain 27.5" platform balances agility & efficiency 140mm rear travel handled by a RockShox Deluxe Select R shock 148mm x 12mm boost rear axle spacing Robust plastic down tube protection with rubber seat stay and chainstay protection Intended Use: Trail / All Mountain Frameset Includes: Frame: Escarpe 6061-T6 double butted Aluminium frame, external cable routing, tapered head tube, post disc brake mounts, BSA threaded BB, Boost hub spacing – 148mm x 12mm thru axle Rear Shock: RockShox Deluxe Select R, 185mm x 50mm, trunnion moun Headset: Acros AZX-212-CO R5, ZS44/28.6 upper and ZS56/40 lower to suit 1-1/8" upper tapered to 1.5"" lower headtube Seat Screw: Vitus, 34.9mm Diameter (frame uses 31.6mm seat post - seat post not included) Axle: Vitus, 181mm Length, 20mm Thread Length, M12xP1.5 Thread Pitch Frame Protection: Plastic down tube protector, rubber chain stay and inner seat stay protection
Pair it up with a 170mm travel fork and there is no limit to what the Sommet 29 can handle, with more traction and more control, you will experience the confidence to conquer the mountain. If you’re aiming for the enduro podium or want to push your riding to the limits on your favourite trail, the Sommet 29 is with you all the way. Key Features: 6061-T6 double butted Aluminium frame with external cable routing for easy maintenance Big hitting enduro frame ready to tame the roughest terrain 29" platform balances speed & efficiency 160mm rear travel handled by a RockShox Super Deluxe Select R shock 148mm x 12mm boost rear axle spacing Robust plastic down tube protection with rubber seat stay and chainstay protection Intended Use: Enduro Frameset Includes: Frame: Sommet 6061-T6 double butted Aluminium frame, external cable routing, tapered head tube, post disc brake mounts, BSA threaded BB, Boost hub spacing – 148mm x 12mm thru axle Rear Shock: RockShox Super Deluxe Select R, 205mm x 62.5mm, trunnion mount Headset: Acros AZX-212-CO R5, ZS44/28.6 upper and ZS56/40 lower to suit 1-1/8" upper tapered to 1.5" lower headtube Seat Screw: Vitus, 34.9mm Diameter (frame uses 31.6mm seat post - seat post not included) Axle: Vitus, 181mm Length, 20mm Thread Length, M12xP1.5 Thread Pitch Frame Protection: Plastic down tube protector, rubber chain stay and inner seat stay protection
Pair it up with a 170mm travel fork and there is no limit to what the Sommet 275 can handle, with more traction and more control, you will experience the confidence to conquer the mountain. If you’re aiming for the enduro podium or want to push your riding to the limits on your favourite trail, the Sommet 275 is with you all the way. Key Features: 6061-T6 double butted Aluminium frame with external cable routing for easy maintenance Big hitting enduro frame ready to tame the roughest terrain 27.5" platform is responsive and agile 160mm rear travel handled by a RockShox Super Deluxe Select R shock 148mm x 12mm boost rear axle spacing Robust plastic down tube protection with rubber seat stay and chainstay protection Intended Use: Enduro Frameset Includes: Frame: Sommet 6061-T6 double butted Aluminium frame, external cable routing, tapered head tube, post disc brake mounts, BSA threaded BB, Boost hub spacing – 148mm x 12mm thru axle Rear Shock: RockShox Super Deluxe Select R, 205mm x 62.5mm, trunnion mount Headset: Acros AZX-212-CO R5, ZS44/28.6 upper and ZS56/40 lower to suit 1-1/8" upper tapered to 1.5" lower headtube Seat Screw: Vitus, 34.9mm Diameter (frame uses 31.6mm seat post - seat post not included) Axle: Vitus, 181mm Length, 20mm Thread Length, M12xP1.5 Thread Pitch Frame Protection: Plastic down tube protector, rubber chain stay and inner seat stay protection
The Escarpe 275 CRX frame features a T800 carbon fibre construction and it is equipped with a Fox Float DPS Factory Series rear shock, this frame is ready to be the foundation of your next hardcore all-mountain bike build. This stylish high-end MTB frame is optimised to provide exceptional trail riding responsiveness, agility and control in all riding conditions. And its adjustable flip-chip suspension platform can be easily fine-tuned to fit your riding style and suspension performance requirements. Agile, Efficient and Stable Full Suspension Trail Frame At the core of the Vitus all-mountain and trail range is the Escarpe CRX Mountain Bike Frame. Bringing forward all that was loved from the previous Escarpe platforms, this latest version has undergone the most comprehensive development yet to deliver a ride experience that’s more controlled, efficient, predictable and stable, whatever the terrain. Climb ahead? No problem. Technical descent inbound? You’ve got this. This performance full-carbon frameset is the perfect starting point to build your dream trail and all-mountain bike. To ride faster, to discover that perfect line, to flow effortlessly where before you tiptoed, your bike and body need to speak the same language. Thankfully the Escarpe knows exactly how to read you and the trail. For Trail and All Mountain Riding Whether braking hard, pushing more power or negotiating a twisty descent, your centre of gravity is rarely constant, so key to the whole system is efficiency. To deal with the dynamic nature of trail riding, the Escarpe stays predictable and consistent so that you can stay loose. No white knuckles here. The suspension kinematics have been enhanced compared to the previous platform, further countering the effects of pedal-bob and reducing the harshness of small bumps and trail vibrations that drain your energy and kill speed. Smoother is faster for longer. With an adjustable flip-chip, that can raise the bottom bracket by 6mm and increase the head angle, you can also customise the setup to best suit how and where you ride. Additionally, geometry and performance are optimised throughout the size range, so whether you are S or XL, there’s no compromise on how this bike feels. Key Features: Full T800 frame sheds weight for a truly responsive ride 27.5" platform for maximum agility Adjustable flip-chip to fine-tune handling and your preferred feel Ultra-Smooth Fox Float DPS Factory Series shock Robust rubber downtube, seat stay and chainstay protection Durable clear protection film applied to high wear areas Features: Frame: Escarpe full T800 carbon front and rear triangles, Internal cable routing, post disc brake mounts, BSA threaded BB, Boost hub spacing – 148mm x 12mm thru axle Rear Shock: Fox Float DPS Factory Series, Kashima coating, Grip2 air spring, EVOL, 3 position lever, 205mm x 60mm, trunnion Headset: Acros AZX-212-CO R5, ZS44/28.6 upper and ZS56/28.6 lower to suit 1-1/8" upper tapered to 1.5" lower headtube Seat Screw: Vitus, 36.4mm Diameter Wheel Size: 27.5" Weight: Medium: 3.1kg Suspension Travel: 150mm Front, 140mm Rear Intended Use: Trail / All Mountain
This hard-hitting full suspension frame features a carbon/alloy frame that strikes the perfect balance of strength, agility and weight and is equipped with a Kashima-coated Fox Float X2 Factory Series rear shock. This rear shock complements the Sommet Enduro Platform Modern geometry with an adjustable flip-chip suspension system gives you exceptional control and composure over all terrains and ensures outstanding rear-wheel traction anywhere. The big-hitting Vitus Sommet 275 MTB frame has been enhanced to deliver stability where all around there is chaos. With volume added to the carbon front triangle, the bike feels calm and predictable with no compromise on agility. So, whether flinging yourself through the most technical Enduro tape or shredding your steepest local trails you still get that unforgettable rush. The rush that pushes you to explore your limits without overstepping the mark. This is for the full-face thrill-seekers and the diehards. This is why you do it. As the sport of Enduro moves forward, challenging both bike and rider with more technical descents and punchy climbs, so the Sommet CRX has been engineered to keep pace. Extensive work has been done to improve small bump sensitivity, smoothing out the trail to keep you firmly in control and reduce pedal bob when you need to lay down more power. There’s a flip-chip to help you refine a setup that best suits your style, internal cable routing to keep everything tidy and the frame is well protected with robust guards on the downtube and chainstays. It’s not a bike for taking just any line, it’s a bike for taking the best line. A bike that tracks so accurately it rewards you with time. Time to line up the next obstacle and pick your route as the trail unfolds in front of you. This is the perfect foundation from which to build your dream Enduro bike. Key Features: Frame Material: T700 carbon fibre front triangle, 6061-T6 aluminium rear Big-hitting enduro frame with modern geometry 27.5" platform for maximum agility Adjustable flip-chip to fine-tune handling and your preferred feel Ultra-Smooth Fox Float X2 Factory Series shock Robust rubber downtube, seat stay and chainstay protection Durable clear protection film applied to high wear areas Carbon Sommet Enduro Platform Modern geometry with adjustable flip-chip, improved suspension kinematics and a smile-inducing ride Features: Frame: Sommet T700 carbon front triangle, 6061-T6 alloy rear, Internal cable routing, post disc brake mounts, BSA threaded BB, Boost hub spacing – 148mm x 12mm thru axle. Axle Specifications: 180mm Length, 13mm Thread Length, M12xP1.0 Thread Pitch Rear Shock: Fox Float X2 Factory Series, Kashima coating, 2 position lever, 205mm x 65mm, trunnion Headset: Acros AZX-212-CO R5, ZS44/28.6 upper and ZS56/40 lower to suit 1-1/8" upper tapered to 1.5" lower headtube Seat Screw: Vitus, 36.4mm Diameter Wheel Size: 27.5" Recommended Suspension Travel: 170mm Front, 170mm Rear Intended Use: Enduro Weight: 4.7kg (with shock)