Vitus Sommet 275 Mountain Bike FrameThe Sommet 275 mountain bike (MTB) frame is every enduro racer and avid all-mountain rider’s dream. It features a carbon/alloy frame that strikes the perfect balance of strength, agility and weight and is equipped with a Kashima-coated Fox Float X2 Factory Series rear shock. This rear shock complements the Sommet Enduro Platform Modern geometry with an adjustable flip-chip suspension system gives you exceptional control and composure over all terrains and ensures outstanding rear-wheel traction anywhere.The big-hitting Vitus Sommet 275 MTB frame has been enhanced to deliver stability where all around there is chaos. With volume added to the carbon front triangle, the bike feels calm and predictable with no compromise on agility.So, whether flinging yourself through the most technical Enduro tape or shredding your steepest local trails you still get that unforgettable rush. The rush that pushes you to explore your limits without overstepping the mark. This is for the full-face thrill seekers and the diehards. This is why you do it.As the sport of Enduro moves forward, challenging both bike and rider with more technical descents and punchy climbs, so the Sommet CRX has been engineered to keep pace. Extensive work has been done to improve small bump sensitivity, smoothing out the trail to keep you firmly in control and reduce pedal bob when you need to lay down more power. There’s a flip-chip to help you refine a setup that best suits your style, internal cable routing to keep everything tidy and the frame is well protected with robust guards on the downtube and chainstays.It’s not a bike for taking just any line, it’s a bike for taking the best line. A bike that tracks so accurately it rewards you with time. Time to line up the next obstacle and pick your route as the trail unfolds in front of you. This is the perfect foundation from which to build your dream Enduro bike.Key Features: Big hitting enduro frame with modern geometry 27.5" platform for maximum agility Adjustable flip chip to fine tune handling and your preferred feel Ultra-Smooth Fox Float X2 Factory Series shock Robust rubber downtube, seat stay and chainstay protection Durable clear protection film applied to high wear areasFeatures: Frame: Sommet T700 carbon front triangle, 6061-T6 alloy rear, Internal cable routing, post disc brake mounts, BSA threaded BB, Boost hub spacing - 148mm x 12mm thru axle. Axle Specifications: 180mm Length, 13mm Thread Length, M12xP1.0 Thread Pitch Rear Shock: Fox Float X2 Factory Series, Kashima coating, Grip2 air spring, 2 position lever, 205mm x 65mm, trunnion Headset: Acros AZX-212-CO R5, ZS44/28.6 upper and ZS56/40 lower to suit 1-1/8" upper tapered to 1.5" lower headtube Seat Screw: Vitus, 34.9mm Diameter Wheel Size: 27.5" Suspension Travel (MTB Only): 170mm Front, 170mm Rear Intended Use: Enduro Weight: 4.7kg (with shock)Buy Vitus Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
Vitus Sommet 297 Mountain Bike FrameThe Sommet 297 mountain bike (MTB) frame features a full-carbon front and alloy rear triangle, and it is intended for use with a 29" front and 27.5" rear wheel. This frame is optimised for enduro racing where it offers a sublime balance of high-speed control, exceptional pedalling efficiency and all-day riding comfort. It is also equipped with a 170mm-travel Kashima-coated Fox Float X2 Factory Series rear shock and features geometry that's ideal for use with 170mm-travel suspension forks.This big-hitting Vitus Sommet 297 Mountain Bike frame, specifically designed for a mullet wheel setup, has been enhanced to deliver stability where all around there is chaos. With volume added to the carbon front triangle, the bike feels calm and predictable with no compromise on agility.So, whether you're flinging yourself through the most technical Enduro tape or shredding your steepest local trails you still get that unforgettable rush. The rush that pushes you to explore your limits without overstepping the mark. This is for the full-face thrill seekers and the diehards. This is why you do it.Long-Travel Enduro Race Frame for Mixed-Wheel PlatformAs the sport of Enduro moves forward, challenging both bike and rider with more technical descents and punchy climbs, so the Sommet 297 has been engineered to keep pace. Extensive work has been done to improve small bump sensitivity, smoothing out the trail to keep you firmly in control and reduce pedal bob when you need to lay down more power. There’s a flip-chip to help you refine a setup that best suits your style, internal cable routing to keep everything tidy and the frame is well protected with robust guards on the downtube and chainstays. Dial in your perfect mullet setup by fitting a big party 29er in the front to keep the rolling momentum high and a business 27.5 at the back for traction and sharp acceleration.The Sommet is not a bike for taking just any line, it’s a bike for taking the best line. A bike that tracks so accurately it rewards you with time. Time to line up the next obstacle and pick your route as the trail unfolds in front of you. This is the perfect foundation from which to build your dream Enduro bike.Key Features: Big hitting enduro frame with modern geometry Mullet 29" front, 27.5" rear platform balancing speed and agility Adjustable flip chip to fine tune handling and your preferred feel Ultra-Smooth Fox Float X2 Factory Series shock Robust rubber downtube, seat stay and chainstay protection Durable clear protection film applied to high wear areasFeatures: Frame: Sommet T700 carbon front triangle, 6061-T6 alloy rear, Internal cable routing, post disc brake mounts, BSA threaded BB, Boost hub spacing - 148mm x 12mm thru axle. Axle Specifications: 180mm Length, 13mm Thread Length, M12xP1.0 Thread Pitch Rear Shock: Fox Float X2 Factory Series, Kashima coating, Grip2 air spring, 2 position lever, 205mm x 65mm, trunnion Headset: Acros AZX-212-CO R5, ZS44/28.6 upper and ZS56/40 lower to suit 1-1/8" upper tapered to 1.5" lower headtube Seat Screw: Vitus, 34.9mm Diameter Carbon Sommet Enduro Platform: Modern geometry with adjustable flip chip, improved suspension kinematics and a smile inducing ride Wheel Size: Mullet - 29" Front / 27.5" Rear Suspension Travel (MTB Only): 170mm Front, 170mm Rear Intended Use: EnduroBuy Vitus Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
Vitus Sommet 297 Mountain Bike FrameThe Sommet 297 mountain bike (MTB) frame features a full-carbon front and alloy rear triangle, and it is intended for use with a 29" front and 27.5" rear wheel. This frame is optimised for enduro racing where it offers a sublime balance of high-speed control, exceptional pedalling efficiency and all-day riding comfort. It is also equipped with a 170mm-travel Kashima-coated Fox Float X2 Factory Series rear shock and features geometry that's ideal for use with 170mm-travel suspension forks.This big-hitting Vitus Sommet 297 Mountain Bike frame, specifically designed for a mullet wheel setup, has been enhanced to deliver stability where all around there is chaos. With volume added to the carbon front triangle, the bike feels calm and predictable with no compromise on agility.So, whether you're flinging yourself through the most technical Enduro tape or shredding your steepest local trails you still get that unforgettable rush. The rush that pushes you to explore your limits without overstepping the mark. This is for the full-face thrill seekers and the diehards. This is why you do it.Long-Travel Enduro Race Frame for Mixed-Wheel PlatformAs the sport of Enduro moves forward, challenging both bike and rider with more technical descents and punchy climbs, so the Sommet 297 has been engineered to keep pace. Extensive work has been done to improve small bump sensitivity, smoothing out the trail to keep you firmly in control and reduce pedal bob when you need to lay down more power. There’s a flip-chip to help you refine a setup that best suits your style, internal cable routing to keep everything tidy and the frame is well protected with robust guards on the downtube and chainstays. Dial in your perfect mullet setup by fitting a big party 29er in the front to keep the rolling momentum high and a business 27.5 at the back for traction and sharp acceleration.The Sommet is not a bike for taking just any line, it’s a bike for taking the best line. A bike that tracks so accurately it rewards you with time. Time to line up the next obstacle and pick your route as the trail unfolds in front of you. This is the perfect foundation from which to build your dream Enduro bike.Key Features: Big hitting enduro frame with modern geometry Mullet 29" front, 27.5" rear platform balancing speed and agility Adjustable flip chip to fine tune handling and your preferred feel Ultra-Smooth Fox Float X2 Factory Series shock Robust rubber downtube, seat stay and chainstay protection Durable clear protection film applied to high wear areasFeatures: Frame: Sommet T700 carbon front triangle, 6061-T6 alloy rear, Internal cable routing, post disc brake mounts, BSA threaded BB, Boost hub spacing - 148mm x 12mm thru axle. Axle Specifications: 180mm Length, 13mm Thread Length, M12xP1.0 Thread Pitch Rear Shock: Fox Float X2 Factory Series, Kashima coating, Grip2 air spring, 2 position lever, 205mm x 65mm, trunnion Headset: Acros AZX-212-CO R5, ZS44/28.6 upper and ZS56/40 lower to suit 1-1/8" upper tapered to 1.5" lower headtube Seat Screw: Vitus, 34.9mm Diameter Carbon Sommet Enduro Platform: Modern geometry with adjustable flip chip, improved suspension kinematics and a smile inducing ride Wheel Size: Mullet - 29" Front / 27.5" Rear Suspension Travel (MTB Only): 170mm Front, 170mm Rear Intended Use: EnduroBuy Vitus Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
Vitus Sommet 297 Mountain Bike FrameThe Sommet 297 mountain bike (MTB) frame features a full-carbon front and alloy rear triangle, and it is intended for use with a 29" front and 27.5" rear wheel. This frame is optimised for enduro racing where it offers a sublime balance of high-speed control, exceptional pedalling efficiency and all-day riding comfort. It is also equipped with a 170mm-travel Kashima-coated Fox Float X2 Factory Series rear shock and features geometry that's ideal for use with 170mm-travel suspension forks.This big-hitting Vitus Sommet 297 Mountain Bike frame, specifically designed for a mullet wheel setup, has been enhanced to deliver stability where all around there is chaos. With volume added to the carbon front triangle, the bike feels calm and predictable with no compromise on agility.So, whether you're flinging yourself through the most technical Enduro tape or shredding your steepest local trails you still get that unforgettable rush. The rush that pushes you to explore your limits without overstepping the mark. This is for the full-face thrill seekers and the diehards. This is why you do it.Long-Travel Enduro Race Frame for Mixed-Wheel PlatformAs the sport of Enduro moves forward, challenging both bike and rider with more technical descents and punchy climbs, so the Sommet 297 has been engineered to keep pace. Extensive work has been done to improve small bump sensitivity, smoothing out the trail to keep you firmly in control and reduce pedal bob when you need to lay down more power. There’s a flip-chip to help you refine a setup that best suits your style, internal cable routing to keep everything tidy and the frame is well protected with robust guards on the downtube and chainstays. Dial in your perfect mullet setup by fitting a big party 29er in the front to keep the rolling momentum high and a business 27.5 at the back for traction and sharp acceleration.The Sommet is not a bike for taking just any line, it’s a bike for taking the best line. A bike that tracks so accurately it rewards you with time. Time to line up the next obstacle and pick your route as the trail unfolds in front of you. This is the perfect foundation from which to build your dream Enduro bike.Key Features: Big hitting enduro frame with modern geometry Mullet 29" front, 27.5" rear platform balancing speed and agility Adjustable flip chip to fine tune handling and your preferred feel Ultra-Smooth Fox Float X2 Factory Series shock Robust rubber downtube, seat stay and chainstay protection Durable clear protection film applied to high wear areasFeatures: Frame: Sommet T700 carbon front triangle, 6061-T6 alloy rear, Internal cable routing, post disc brake mounts, BSA threaded BB, Boost hub spacing - 148mm x 12mm thru axle. Axle Specifications: 180mm Length, 13mm Thread Length, M12xP1.0 Thread Pitch Rear Shock: Fox Float X2 Factory Series, Kashima coating, Grip2 air spring, 2 position lever, 205mm x 65mm, trunnion Headset: Acros AZX-212-CO R5, ZS44/28.6 upper and ZS56/40 lower to suit 1-1/8" upper tapered to 1.5" lower headtube Seat Screw: Vitus, 34.9mm Diameter Carbon Sommet Enduro Platform: Modern geometry with adjustable flip chip, improved suspension kinematics and a smile inducing ride Wheel Size: Mullet - 29" Front / 27.5" Rear Suspension Travel (MTB Only): 170mm Front, 170mm Rear Intended Use: EnduroBuy Vitus Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
Vitus Sommet 275 Mountain Bike FrameThe Sommet 275 mountain bike (MTB) frame is every enduro racer and avid all-mountain rider’s dream. It features a carbon/alloy frame that strikes the perfect balance of strength, agility and weight and is equipped with a Kashima-coated Fox Float X2 Factory Series rear shock. This rear shock complements the Sommet Enduro Platform Modern geometry with an adjustable flip-chip suspension system gives you exceptional control and composure over all terrains and ensures outstanding rear-wheel traction anywhere.The big-hitting Vitus Sommet 275 MTB frame has been enhanced to deliver stability where all around there is chaos. With volume added to the carbon front triangle, the bike feels calm and predictable with no compromise on agility.So, whether flinging yourself through the most technical Enduro tape or shredding your steepest local trails you still get that unforgettable rush. The rush that pushes you to explore your limits without overstepping the mark. This is for the full-face thrill seekers and the diehards. This is why you do it.As the sport of Enduro moves forward, challenging both bike and rider with more technical descents and punchy climbs, so the Sommet CRX has been engineered to keep pace. Extensive work has been done to improve small bump sensitivity, smoothing out the trail to keep you firmly in control and reduce pedal bob when you need to lay down more power. There’s a flip-chip to help you refine a setup that best suits your style, internal cable routing to keep everything tidy and the frame is well protected with robust guards on the downtube and chainstays.It’s not a bike for taking just any line, it’s a bike for taking the best line. A bike that tracks so accurately it rewards you with time. Time to line up the next obstacle and pick your route as the trail unfolds in front of you. This is the perfect foundation from which to build your dream Enduro bike.Key Features: Big hitting enduro frame with modern geometry 27.5" platform for maximum agility Adjustable flip chip to fine tune handling and your preferred feel Ultra-Smooth Fox Float X2 Factory Series shock Robust rubber downtube, seat stay and chainstay protection Durable clear protection film applied to high wear areasFeatures: Frame: Sommet T700 carbon front triangle, 6061-T6 alloy rear, Internal cable routing, post disc brake mounts, BSA threaded BB, Boost hub spacing - 148mm x 12mm thru axle. Axle Specifications: 180mm Length, 13mm Thread Length, M12xP1.0 Thread Pitch Rear Shock: Fox Float X2 Factory Series, Kashima coating, Grip2 air spring, 2 position lever, 205mm x 65mm, trunnion Headset: Acros AZX-212-CO R5, ZS44/28.6 upper and ZS56/40 lower to suit 1-1/8" upper tapered to 1.5" lower headtube Seat Screw: Vitus, 34.9mm Diameter Wheel Size: 27.5" Suspension Travel (MTB Only): 170mm Front, 170mm Rear Intended Use: Enduro Weight: 4.7kg (with shock)Buy Vitus Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
Vitus Sommet 297 Mountain Bike FrameThe Sommet 297 mountain bike (MTB) frame features a full-carbon front and alloy rear triangle, and it is intended for use with a 29" front and 27.5" rear wheel. This frame is optimised for enduro racing where it offers a sublime balance of high-speed control, exceptional pedalling efficiency and all-day riding comfort. It is also equipped with a 170mm-travel Kashima-coated Fox Float X2 Factory Series rear shock and features geometry that's ideal for use with 170mm-travel suspension forks.This big-hitting Vitus Sommet 297 Mountain Bike frame, specifically designed for a mullet wheel setup, has been enhanced to deliver stability where all around there is chaos. With volume added to the carbon front triangle, the bike feels calm and predictable with no compromise on agility.So, whether you're flinging yourself through the most technical Enduro tape or shredding your steepest local trails you still get that unforgettable rush. The rush that pushes you to explore your limits without overstepping the mark. This is for the full-face thrill seekers and the diehards. This is why you do it.Long-Travel Enduro Race Frame for Mixed-Wheel PlatformAs the sport of Enduro moves forward, challenging both bike and rider with more technical descents and punchy climbs, so the Sommet 297 has been engineered to keep pace. Extensive work has been done to improve small bump sensitivity, smoothing out the trail to keep you firmly in control and reduce pedal bob when you need to lay down more power. There’s a flip-chip to help you refine a setup that best suits your style, internal cable routing to keep everything tidy and the frame is well protected with robust guards on the downtube and chainstays. Dial in your perfect mullet setup by fitting a big party 29er in the front to keep the rolling momentum high and a business 27.5 at the back for traction and sharp acceleration.The Sommet is not a bike for taking just any line, it’s a bike for taking the best line. A bike that tracks so accurately it rewards you with time. Time to line up the next obstacle and pick your route as the trail unfolds in front of you. This is the perfect foundation from which to build your dream Enduro bike.Key Features: Big hitting enduro frame with modern geometry Mullet 29" front, 27.5" rear platform balancing speed and agility Adjustable flip chip to fine tune handling and your preferred feel Ultra-Smooth Fox Float X2 Factory Series shock Robust rubber downtube, seat stay and chainstay protection Durable clear protection film applied to high wear areasFeatures: Frame: Sommet T700 carbon front triangle, 6061-T6 alloy rear, Internal cable routing, post disc brake mounts, BSA threaded BB, Boost hub spacing - 148mm x 12mm thru axle. Axle Specifications: 180mm Length, 13mm Thread Length, M12xP1.0 Thread Pitch Rear Shock: Fox Float X2 Factory Series, Kashima coating, Grip2 air spring, 2 position lever, 205mm x 65mm, trunnion Headset: Acros AZX-212-CO R5, ZS44/28.6 upper and ZS56/40 lower to suit 1-1/8" upper tapered to 1.5" lower headtube Seat Screw: Vitus, 34.9mm Diameter Carbon Sommet Enduro Platform: Modern geometry with adjustable flip chip, improved suspension kinematics and a smile inducing ride Wheel Size: Mullet - 29" Front / 27.5" Rear Suspension Travel (MTB Only): 170mm Front, 170mm Rear Intended Use: EnduroBuy Vitus Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
Vitus Sommet 290 Mountain Bike FrameEngineered and optimised to offer exceptional speed and all-terrain control, the Sommet 290 mountain bike (MTB) frame is a superb foundation on which to build your next high-performance enduro race bike. It features a durable and lightweight front triangle and a reliable and stiff alloy rear triangle, giving you the perfect balance of strength, agility and control at a low weight. Vitus has equipped it with a top-level Kashima-coated Fox Float X2 Factory Series rear shock that pairs well with the Sommet's adjustable flip-chip suspension system.The big-hitting Vitus Sommet 290 Mountain Bike frame has been enhanced to deliver stability where all around there is chaos. With volume added to the carbon front triangle, the bike feels calm and predictable with no compromise on agility.So, whether flinging yourself through the most technical Enduro tape or shredding your steepest local trails you still get that unforgettable rush. The rush that pushes you to explore your limits without overstepping the mark. This is for the full-face thrill seekers and the diehards. This is why you do it.As the sport of Enduro moves forward, challenging both bike and rider with more technical descents and punchy climbs, so the Sommet CRX has been engineered to keep pace. Extensive work has been done to improve small bump sensitivity, smoothing out the trail to keep you firmly in control and reduce pedal bob when you need to lay down more power. There’s a flip-chip to help you refine a setup that best suits your style, internal cable routing to keep everything tidy and the frame is well protected with robust guards on the downtube and chainstays.It’s not a bike for taking just any line, it’s a bike for taking the best line. A bike that tracks so accurately it rewards you with time. Time to line up the next obstacle and pick your route as the trail unfolds in front of you. This is the perfect foundation from which to build your dream Enduro bike.Key Features: Big hitting enduro frame with modern geometry 29" platform for flat out speed Adjustable flip chip to fine tune handling and your preferred feel Ultra-Smooth Fox Float X2 Factory Series shock Robust rubber downtube, seat stay and chainstay protection Durable clear protection film applied to high wear areasFeatures: Frame: Sommet T700 carbon front triangle, 6061-T6 alloy rear, Internal cable routing, post disc brake mounts, BSA threaded BB, Boost hub spacing - 148mm x 12mm thru axle. Axle Specifications: 180mm Length, 13mm Thread Length, M12xP1.0 Thread Pitch Rear Shock: Fox Float X2 Factory Series, Kashima coating, Grip2 air spring, 2 position lever, 205mm x 62.5mm, trunnion Headset: Acros AZX-212-CO R5, ZS44/28.6 upper and ZS56/40 lower to suit 1-1/8" upper tapered to 1.5" lower headtube Seat Screw: Vitus, 34.9mm Diameter Wheel Size: 29" Suspension Travel (MTB Only): 170mm Front, 162mm Rear Intended Use: Enduro Weight: 4.8kg (with shock)Buy Vitus Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
Vitus Sommet 290 Mountain Bike FrameEngineered and optimised to offer exceptional speed and all-terrain control, the Sommet 290 mountain bike (MTB) frame is a superb foundation on which to build your next high-performance enduro race bike. It features a durable and lightweight front triangle and a reliable and stiff alloy rear triangle, giving you the perfect balance of strength, agility and control at a low weight. Vitus has equipped it with a top-level Kashima-coated Fox Float X2 Factory Series rear shock that pairs well with the Sommet's adjustable flip-chip suspension system.The big-hitting Vitus Sommet 290 Mountain Bike frame has been enhanced to deliver stability where all around there is chaos. With volume added to the carbon front triangle, the bike feels calm and predictable with no compromise on agility.So, whether flinging yourself through the most technical Enduro tape or shredding your steepest local trails you still get that unforgettable rush. The rush that pushes you to explore your limits without overstepping the mark. This is for the full-face thrill seekers and the diehards. This is why you do it.As the sport of Enduro moves forward, challenging both bike and rider with more technical descents and punchy climbs, so the Sommet CRX has been engineered to keep pace. Extensive work has been done to improve small bump sensitivity, smoothing out the trail to keep you firmly in control and reduce pedal bob when you need to lay down more power. There’s a flip-chip to help you refine a setup that best suits your style, internal cable routing to keep everything tidy and the frame is well protected with robust guards on the downtube and chainstays.It’s not a bike for taking just any line, it’s a bike for taking the best line. A bike that tracks so accurately it rewards you with time. Time to line up the next obstacle and pick your route as the trail unfolds in front of you. This is the perfect foundation from which to build your dream Enduro bike.Key Features: Big hitting enduro frame with modern geometry 29" platform for flat out speed Adjustable flip chip to fine tune handling and your preferred feel Ultra-Smooth Fox Float X2 Factory Series shock Robust rubber downtube, seat stay and chainstay protection Durable clear protection film applied to high wear areasFeatures: Frame: Sommet T700 carbon front triangle, 6061-T6 alloy rear, Internal cable routing, post disc brake mounts, BSA threaded BB, Boost hub spacing - 148mm x 12mm thru axle. Axle Specifications: 180mm Length, 13mm Thread Length, M12xP1.0 Thread Pitch Rear Shock: Fox Float X2 Factory Series, Kashima coating, Grip2 air spring, 2 position lever, 205mm x 62.5mm, trunnion Headset: Acros AZX-212-CO R5, ZS44/28.6 upper and ZS56/40 lower to suit 1-1/8" upper tapered to 1.5" lower headtube Seat Screw: Vitus, 34.9mm Diameter Wheel Size: 29" Suspension Travel (MTB Only): 170mm Front, 162mm Rear Intended Use: Enduro Weight: 4.8kg (with shock)Buy Vitus Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
Vitus Sommet 275 Mountain Bike FrameThe Sommet 275 mountain bike (MTB) frame is every enduro racer and avid all-mountain rider’s dream. It features a carbon/alloy frame that strikes the perfect balance of strength, agility and weight and is equipped with a Kashima-coated Fox Float X2 Factory Series rear shock. This rear shock complements the Sommet Enduro Platform Modern geometry with an adjustable flip-chip suspension system gives you exceptional control and composure over all terrains and ensures outstanding rear-wheel traction anywhere.The big-hitting Vitus Sommet 275 MTB frame has been enhanced to deliver stability where all around there is chaos. With volume added to the carbon front triangle, the bike feels calm and predictable with no compromise on agility.So, whether flinging yourself through the most technical Enduro tape or shredding your steepest local trails you still get that unforgettable rush. The rush that pushes you to explore your limits without overstepping the mark. This is for the full-face thrill seekers and the diehards. This is why you do it.As the sport of Enduro moves forward, challenging both bike and rider with more technical descents and punchy climbs, so the Sommet CRX has been engineered to keep pace. Extensive work has been done to improve small bump sensitivity, smoothing out the trail to keep you firmly in control and reduce pedal bob when you need to lay down more power. There’s a flip-chip to help you refine a setup that best suits your style, internal cable routing to keep everything tidy and the frame is well protected with robust guards on the downtube and chainstays.It’s not a bike for taking just any line, it’s a bike for taking the best line. A bike that tracks so accurately it rewards you with time. Time to line up the next obstacle and pick your route as the trail unfolds in front of you. This is the perfect foundation from which to build your dream Enduro bike.Key Features: Big hitting enduro frame with modern geometry 27.5" platform for maximum agility Adjustable flip chip to fine tune handling and your preferred feel Ultra-Smooth Fox Float X2 Factory Series shock Robust rubber downtube, seat stay and chainstay protection Durable clear protection film applied to high wear areasFeatures: Frame: Sommet T700 carbon front triangle, 6061-T6 alloy rear, Internal cable routing, post disc brake mounts, BSA threaded BB, Boost hub spacing - 148mm x 12mm thru axle. Axle Specifications: 180mm Length, 13mm Thread Length, M12xP1.0 Thread Pitch Rear Shock: Fox Float X2 Factory Series, Kashima coating, Grip2 air spring, 2 position lever, 205mm x 65mm, trunnion Headset: Acros AZX-212-CO R5, ZS44/28.6 upper and ZS56/40 lower to suit 1-1/8" upper tapered to 1.5" lower headtube Seat Screw: Vitus, 34.9mm Diameter Wheel Size: 27.5" Suspension Travel (MTB Only): 170mm Front, 170mm Rear Intended Use: Enduro Weight: 4.7kg (with shock)Buy Vitus Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
Vitus Sommet 290 Mountain Bike FrameEngineered and optimised to offer exceptional speed and all-terrain control, the Sommet 290 mountain bike (MTB) frame is a superb foundation on which to build your next high-performance enduro race bike. It features a durable and lightweight front triangle and a reliable and stiff alloy rear triangle, giving you the perfect balance of strength, agility and control at a low weight. Vitus has equipped it with a top-level Kashima-coated Fox Float X2 Factory Series rear shock that pairs well with the Sommet's adjustable flip-chip suspension system.The big-hitting Vitus Sommet 290 Mountain Bike frame has been enhanced to deliver stability where all around there is chaos. With volume added to the carbon front triangle, the bike feels calm and predictable with no compromise on agility.So, whether flinging yourself through the most technical Enduro tape or shredding your steepest local trails you still get that unforgettable rush. The rush that pushes you to explore your limits without overstepping the mark. This is for the full-face thrill seekers and the diehards. This is why you do it.As the sport of Enduro moves forward, challenging both bike and rider with more technical descents and punchy climbs, so the Sommet CRX has been engineered to keep pace. Extensive work has been done to improve small bump sensitivity, smoothing out the trail to keep you firmly in control and reduce pedal bob when you need to lay down more power. There’s a flip-chip to help you refine a setup that best suits your style, internal cable routing to keep everything tidy and the frame is well protected with robust guards on the downtube and chainstays.It’s not a bike for taking just any line, it’s a bike for taking the best line. A bike that tracks so accurately it rewards you with time. Time to line up the next obstacle and pick your route as the trail unfolds in front of you. This is the perfect foundation from which to build your dream Enduro bike.Key Features: Big hitting enduro frame with modern geometry 29" platform for flat out speed Adjustable flip chip to fine tune handling and your preferred feel Ultra-Smooth Fox Float X2 Factory Series shock Robust rubber downtube, seat stay and chainstay protection Durable clear protection film applied to high wear areasFeatures: Frame: Sommet T700 carbon front triangle, 6061-T6 alloy rear, Internal cable routing, post disc brake mounts, BSA threaded BB, Boost hub spacing - 148mm x 12mm thru axle. Axle Specifications: 180mm Length, 13mm Thread Length, M12xP1.0 Thread Pitch Rear Shock: Fox Float X2 Factory Series, Kashima coating, Grip2 air spring, 2 position lever, 205mm x 62.5mm, trunnion Headset: Acros AZX-212-CO R5, ZS44/28.6 upper and ZS56/40 lower to suit 1-1/8" upper tapered to 1.5" lower headtube Seat Screw: Vitus, 34.9mm Diameter Wheel Size: 29" Suspension Travel (MTB Only): 170mm Front, 162mm Rear Intended Use: Enduro Weight: 4.8kg (with shock)Buy Vitus Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Sommet 290 frame features a durable and lightweight front triangle and a reliable and stiff alloy rear triangle, giving you the perfect balance of strength, agility and control at a low weight. Vitus has as equipped it with a top-level Kashima-coated Fox Float X2 Factory Series rear shock that pairs well with the Sommet's adjustable flip-chip suspension system. The big-hitting Vitus Sommet 290 MTB frame has been enhanced to deliver stability where all around there is chaos. With volume added to the carbon front triangle, the bike feels calm and predictable with no compromise on agility. So, whether flinging yourself through the most technical Enduro tape or shredding your steepest local trails you still get that unforgettable rush. The rush that pushes you to explore your limits without overstepping the mark. This is for the full-face thrill-seekers and the diehards. This is why you do it. As the sport of Enduro moves forward, challenging both bike and rider with more technical descents and punchy climbs, the Sommet has been engineered to keep pace. Extensive work has been done to improve small bump sensitivity, smoothing out the trail to keep you firmly in control and reduce pedal bob when you need to lay down more power. There’s a flip-chip to help you refine a setup that best suits your style, internal cable routing to keep everything tidy and the frame is well protected with robust guards on the downtube and chainstays. It’s not a bike for taking just any line, it’s a bike for taking the best line. A bike that tracks so accurately it rewards you with time. Time to line up the next obstacle and pick your route as the trail unfolds in front of you. This is the perfect foundation from which to build your dream Enduro bike. Key Features: Frame Material: T700 carbon fibre front triangle, 6061-T6 aluminium rear Big-hitting enduro frame with modern geometry 29" platform for flat out speed Adjustable flip-chip to fine-tune handling and your preferred feel Ultra-Smooth Fox Float X2 Factory Series shock Robust rubber downtube, seat stay and chainstay protection Durable clear protection film applied to high wear areas Carbon Sommet Enduro Platform Modern geometry with the adjustable flip-chip, improved suspension kinematics and a smile-inducing ride Features: Frame: Sommet T700 carbon front triangle, 6061-T6 alloy rear, Internal cable routing, post disc brake mounts, BSA threaded BB, Boost hub spacing – 148mm x 12mm thru axle. Axle Specifications: 180mm Length, 13mm Thread Length, M12xP1.0 Thread Pitch Rear Shock: Fox Float X2 Factory Series, Kashima coating, 2 position lever, 205mm x 62.5mm, trunnion Headset: Acros AZX-212-CO R5, ZS44/28.6 upper and ZS56/40 lower to suit 1-1/8" upper tapered to 1.5" lower headtube Seat Screw: Vitus, 36.4mm Diameter Wheel Size: 29" Suspension Travel: 170mm Front, 162mm Rear Intended Use: Enduro Weight: 4.8kg (with shock)
Vitus Sommet 290 Mountain Bike FrameEngineered and optimised to offer exceptional speed and all-terrain control, the Sommet 290 mountain bike (MTB) frame is a superb foundation on which to build your next high-performance enduro race bike. It features a durable and lightweight front triangle and a reliable and stiff alloy rear triangle, giving you the perfect balance of strength, agility and control at a low weight. Vitus has equipped it with a top-level Kashima-coated Fox Float X2 Factory Series rear shock that pairs well with the Sommet's adjustable flip-chip suspension system.The big-hitting Vitus Sommet 290 Mountain Bike frame has been enhanced to deliver stability where all around there is chaos. With volume added to the carbon front triangle, the bike feels calm and predictable with no compromise on agility.So, whether flinging yourself through the most technical Enduro tape or shredding your steepest local trails you still get that unforgettable rush. The rush that pushes you to explore your limits without overstepping the mark. This is for the full-face thrill seekers and the diehards. This is why you do it.As the sport of Enduro moves forward, challenging both bike and rider with more technical descents and punchy climbs, so the Sommet CRX has been engineered to keep pace. Extensive work has been done to improve small bump sensitivity, smoothing out the trail to keep you firmly in control and reduce pedal bob when you need to lay down more power. There’s a flip-chip to help you refine a setup that best suits your style, internal cable routing to keep everything tidy and the frame is well protected with robust guards on the downtube and chainstays.It’s not a bike for taking just any line, it’s a bike for taking the best line. A bike that tracks so accurately it rewards you with time. Time to line up the next obstacle and pick your route as the trail unfolds in front of you. This is the perfect foundation from which to build your dream Enduro bike.Key Features: Big hitting enduro frame with modern geometry 29" platform for flat out speed Adjustable flip chip to fine tune handling and your preferred feel Ultra-Smooth Fox Float X2 Factory Series shock Robust rubber downtube, seat stay and chainstay protection Durable clear protection film applied to high wear areasFeatures: Frame: Sommet T700 carbon front triangle, 6061-T6 alloy rear, Internal cable routing, post disc brake mounts, BSA threaded BB, Boost hub spacing - 148mm x 12mm thru axle. Axle Specifications: 180mm Length, 13mm Thread Length, M12xP1.0 Thread Pitch Rear Shock: Fox Float X2 Factory Series, Kashima coating, Grip2 air spring, 2 position lever, 205mm x 62.5mm, trunnion Headset: Acros AZX-212-CO R5, ZS44/28.6 upper and ZS56/40 lower to suit 1-1/8" upper tapered to 1.5" lower headtube Seat Screw: Vitus, 34.9mm Diameter Wheel Size: 29" Suspension Travel (MTB Only): 170mm Front, 162mm Rear Intended Use: Enduro Weight: 4.8kg (with shock)Buy Vitus Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.