The Machine Stem from Stranger, CNC machined from a block of 6061-T6 aluminium that results in a stem that means business. It's tough and fairly lightweight with a minimal, recessed top plate. Stranger's logo is debossed into the top cap plate and to keep the overall look clean the stem has a recessed Fork Cap area so the top cap sits flush inside the stem. ###section### Product Specs TYPE: 22.2mm REACH: 50mm RISE: 30mm CLAMPING DIAMETER: Top Load WEIGHT: 305g (10.76oz)
The Miki Flack signature stem from United. A fully CNC 6061 Ali block much like the Purge stem but front loading with a 48mm Reach and an 8mm rise you can rest assured you're safe up front. ###section### Product Specs TYPE: Front Load REACH: 48mm RISE: 8mm CLAMPING DIAMETER: 22.2mm WEIGHT: TBC
Working on the design of the Odin Stem with Mark Burnett, Shadow wanted it to really cater to the modern rider . Rider’s are going taller and taller with their handlebar heights so it was only appropriate to design a stem that would allow riders to sustain this taller handlebar preference. Mark Burnett also added to the design by requesting a shorter overall reach. Not only catering to his preference, this allows the stem to be much shorter and stout. Creating an overall stronger design. Taking these two details and encompassing them into a 11.5oz stem, we are confident that we are on the forefront of modern BMX feel and ride quality. ###section### Product Specs TYPE: Top Load REACH: 48mm RISE: 36mm CLAMPING DIAMETER: 22.2mm WEIGHT: 326g
The Stay Strong V1 Pro Race Stem is built from fully machined alloy for the perfect balance between strength, durability and weight. Heat-treated M6 bolts and 31mm CNC'd compression bolt recess. CNC machined Stay Strong logos on the sides complete the stem. ###section### Product Specs TYPE: 22.2mm REACH: 45-60mm RISE: TBC CLAMPING DIAMETER: Top Load WEIGHT: TBC
The Stay Strong V1 Pro Race Stem is built from fully machined alloy for the perfect balance between strength, durability and weight. Heat-treated M6 bolts and 31mm CNC'd compression bolt recess. CNC machined Stay Strong logos on the sides complete the stem. ###section### Product Specs TYPE: 22.2mm REACH: 35-45mm RISE: TBC CLAMPING DIAMETER: Top Load WEIGHT: TBC
With a flip-flop design that allows you to fit the stem either way for a more upright seating position, this Pro model is aluminium-made to stay durable and strong through the hardest of rides. With a four-bolt, detachable clamp design, your bar is held securely in place without compromising manoeuvrability, adding further strength to your cockpit. Designed to protect composite-made bars from stresses and impacts, it is sized to fit most common bars and steerers, making it a versatile choice for the avid rider.
Click here to see what Staff Rider Steve thought of the USE Race Stem. Created from forged aerospace 7075 aluminium is then CNC’d to ensure strong enough to go through the rigorous FEA testing, simple to install as conventionally clamped to 31.8mm bars and Carbon friendly. –
ULTIMATE USE Race StemULTIMATE USE's Race Stem is crafted from aerospace-grade 7075 aluminium and is CNC machined to reduce weight and make sure it is strong, rigid and lightweight. It has gone through rigorous FEA testing to ensure it is race ready and can handle the stresses of the most powerful sprinters and late breaking on the steepest descents. Carbon and aluminium handlebar friendly, it uses the common 31.8mm clamp standard.Features: Material: Aerospace-grade 7075 Aluminium Bar Clamp Size: 31.8mm CNC Machined FEA testedBuy ULTIMATE USE Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
K-Edge Garmin Integrated Handlebar System MountThe Garmin Integrated Handlebar System Mount from K-Edge ensures a durable and aerodynamic mount for your Garmin cycle computer. Suited for use with integrated handlebar systems, this Garmin-approved mount is adjustable, low-profile and lightweight.World Tour tested and proven. The ultimate one-piece bar/stem systems call for an elite level mount that positions your computer solidly out-front and aero. Compatibility: All Garmin cycling computers Most Canyon integrated handlebar-stem systems (not compatible with Canyon H36 integrated bar). **M4x20mm 0.7 thread pitch hardware not included.** Combo Adapter (K13-580-BLK) is NOT compatible and will void lifetime warranty. NOT COMPATIBLE WITH: CERVELO WISHBONE SYSTEM (ABO8, CS028 V-STEM), VENTUM INTEGRATED HANDLEBARS, COLNAGO R41 STEM.Features: For Integrated Handlebar (one piece) bar/stem Pro level mount with -7 degree articulation for custom computer positioning Lifetime warranty. CNC Machined. Black Anodized GARMIN approved replaceable computer insert protects computer tabs Not combo compatible (choose K13-2500iC mount for Combo use) M5 hardware included. If smaller bolt required, use 8.4mm washer to ensure secure fit Weight: 42 g Dimensions: 14.5 × 14.5 × 4 cm Made in house. Boise, Idaho USABuy K-Edge Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
K-Edge Wahoo Integrated Handlebar System MountThe Wahoo Integrated Handlebar System Mount from K-Edge ensures a durable and aerodynamic mount for your Wahoo cycle computer. Suited for use with integrated handlebar systems, this Wahoo-approved mount is adjustable, low-profile and lightweight.World Tour tested and proven. The ultimate one-piece bar/stem systems call for an elite level mount that positions your computer solidly out-front and aero. Compatibility: All Wahoo cycling computers Most Canyon integrated handlebar-stem systems (not compatible with Canyon H36 integrated bar). **M4x20mm 0.7 thread pitch hardware not included.** Combo Adapter (K13-580-BLK) is NOT compatible and will void lifetime warranty. NOT COMPATIBLE WITH: CERVELO WISHBONE SYSTEM (ABO8, CS028 V-STEM), VENTUM INTEGRATED HANDLEBARS, COLNAGO R41 STEM.Features: For Integrated Handlebar (one piece) bar/stem Pro level mount with -7 degree articulation for custom computer positioning Lifetime warranty. CNC Machined. Black Anodized Wahoo approved replaceable computer insert protects computer tabs Not combo compatible (choose K13-2600iC mount for Combo use) M5 hardware included. If smaller bolt required, use 8.4mm washer to ensure secure fit Weight: 42 g Dimensions: 14.5 × 14.5 × 4 cm Made in house. Boise, Idaho USABuy K-Edge Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
A new year and new graphics for the famous Deda Pista stem, Full 3D forged alloy with a 70 degree angle, makes this stem the first choice on anyones list for their Track bike. Finished off perfectly with a high end gloss finish. Features: Material: Alloy 2014 3D Forged Angle: 70deg Handlebar dia: 31.7mm Weight: 126g (110mm)
The Defy 35+ has a low stack height, a low 5-degree rise and with its stubby 35mm length, it combines well with modern bike frame's longer top tubes to give you precise control. For ease of installation there’s a “Top Close” clamp design and to prevent your knees knocking on external bolts, the steerer clamp bolts sit internally.