The Stay Strong Top Line Race Stem blends traditional BMX stem design with race specific features to create this lighter weight, sturdy stem. Fully CNC machined alloy construction with cut-out/through design to shave excess weight. Laser etched Stay Strong logos add the finishing touches. ###section### Product Specs TYPE: 22.2mm REACH: 35mm/40mm/45mm/50mm/53mm/57mm/60mm Options RISE: TBC CLAMPING DIAMETER: Top Load WEIGHT: 290g (10.2oz)
A revised version of Fly Bikes Volcano Stem that's lighter and slimmer than the original without sacrificing any strength or durability. It still features those chunky anti-slip grooves from the original to keep your bars locked in place and that same minimalist, clean design. It's now aimed more towards transition and ramp style riders. ###section### Product Specs TYPE: 22.2mm REACH: 50mm RISE: 25mm CLAMPING DIAMETER: Top Load WEIGHT: 281g (9.9oz)
Fly talked with the team riders running the original Volcano front load stem, and came up with a refined design to lower the weight and give it a slimmer overall size. The Volcano FL2 Stem still features a 7mm rise and 50mm reach with Anti-Slip grooves to ensure exceptional clamping power at just the right size. ###section### Product Specs TYPE: 22.2mm REACH: 50mm RISE: 7mm CLAMPING DIAMETER: Front Load WEIGHT: 281g (9.9oz)
The Fly Volcano 25 Stem is a refined version of their Volcano TT Stem, CNC machined 6061-T6 aluminium creates a strong, durable stem while heat-treated 4130 chromo bolts keep the stem and your bars locked in place. Anti-slip grooves add extra grip to ensure your bars don't slip, a recessed top for the fork cap create a real clean look with a subtle Fly logo on the face adding the finishing touch. ###section### Product Specs TYPE: 22.2mm REACH: 50mm RISE: 25mm CLAMPING DIAMETER: Top Load WEIGHT: 281g (9.9oz)
The Volcano 25L stem is for the riders looking for a longer stem to accommodate their height or just give them some extra room to work with! Based on our popular Volcano TT stem, the Volcano 25 Large is made from fully CNC machined 6061-T6, has a 25mm rise, a long 57mm reach and a 50mm width with Anti-Slip Grooves, strong heat-treated 4130 bolts, a recessed top for a flush fork cap, beveled edges and small Flybikes logo on the top cap! This stem is ideal for the taller transitions and trails rider that wants a little extra room to work with! ###section### Product Specs TYPE: Top Load REACH: 57mm RISE: 25mm CLAMPING DIAMETER: 22.2mm WEIGHT: TBC
The Fly Volcano 35 Stem is the bigger refined version of Fly's Volcano ST Stem, CNC machined 6061-T6 aluminium makes the Volcano 35 Stem a truly burly piece built for exceptional durability and strength. The 35 model comes with a shorter 48mm reach and a taller, more street friendly 35mm rise making your ride not only ultra responsive, but also amazing looking too. ###section### Product Specs TYPE: 22.2mm REACH: 48mm RISE: 35mm CLAMPING DIAMETER: Top Load WEIGHT: 366g (12.9oz)
Premium's Sub-10 V3 Top Load stem is made from 6061 alloy with a nicely machined faceplate. Countersunk top cap recess for the flush look ###section### Product Specs TYPE: Top Load REACH: 53mm RISE: 33mm CLAMPING DIAMETER: 22.2mm WEIGHT: 295g
The Ultimate Race has been designed to be a light weight, ultra-stiff option for road racers or XC racers. Constructed from forged aerospace 7075 aluminium that is then CNC d to ensure that it is strong enough to go through the rigorous FEA testing. The Race stem sets the benchmark for all others to follow; ultra stiff, light-weight, user friendly, conventional clamping system and carbon friendly.Material: 7075 AluminiumLength: 80mmRise: 8 DegreeClamp Diameter: 31.8mmStack Height: 38mmApprox. Weight: 150g (100mm Length)
Finished off perfectly with a high end gloss finish.
The Renthal Apex stem features a unique clamping system. This allows much of the stem body material to be removed, whilst retaining the strength and stiffness demanded by modern, wide handlebars. The clamps are inserted over the small diameter section of the handlebar and slid into the centre, giving a 240-degree wrap of the handlebar. MTB Stem with an Advanced Construction The construction on the Renthal Apex 31.8mm model comprises a fully CNC machined 2014 aluminium body and 7075 aluminium clamps. An oversize centre bore, extensive 3D machining and external webbing maximise structural strength and stiffness and minimise weight. Continuing Renthal's philosophy of giving you the choice in your set-up, the stem is available in 40, 50, 60 and 70mm lengths. Each of these sizes can be flipped to give either a +/-6-degree of rise. This gives options for riders and bikes of all size, type and style.
Deda Elementi Pista StemDeda Elementi's Pista Stem is the best stem for track racing. It's constructed from full 3D forged alloy 2014 with a 70° angle and it's used by many of the best track cyclists in the world.Features: Material: 3D Forged 2014 Alloy Screws: CrMo Finish: Black anodised with white logo Angle: 70° Handlebar Clamp: 31.7 mm Fork Steerer: 1 1/8” (28.6mm) Clamp Height: 40mm Weight: 126g (110 mm)Buy Deda Elementi Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Spank SPIKE 800 MTB Race Bar with Race 2 StemWhether you're exploring or racing, this riser bar and stem bundle is engineered for more reliable and controlled off-road performance. It features a Spank Spike 800 Race Bar with 15mm rise and a Spank Race 2 Stem for stronger and safer performance on the most demanding mountain bike (MTB) terrains. This makes it an ideal combination for both downhill (DH) racers and mountain bike (MTB) trail-riders.Spank Spike 800 Race BarWith a Downhill (DH) World Cup tested and approved design, the Spike 800 Race riser bar uses its unique combination of Super-6 aluminium, patented CNC bending, and Dual-Extreme-Gradual Taper (XGT) technology to deliver superior durability and control on every off-road ride. It's equipped with four degrees of up-sweep and 8 degrees of back-sweep, so riders can benefit from performance-optimised geometry. Spank has also put this model through its shot peening and anodising finishing process, which gives it additional robustness as well as protection against corrosion. This makes it perfect for aggressive all-mountain, enduro or downhill racing in all-weather conditions.Spank Race 2 StemThis MTB stem features a 2D-forged MGR alloy construction, which allows it to handle all of the intensity that comes with long days in the mountains. Its four-bolt clamp securely holds your handlebar in place, while its tough steerer-end provides a reliable fit to your fork. Coming equipped with zero rise as standard, this mountain bike stem is a great choice of upgrade for safely connecting your handlebars to your fork's steerer tube. Features: Material: Handlebar: MGR Super Six Alloy; Stem: 2D Forged MGR Alloy, CNC weight optimised Finish: Shot-peening and Anodising Use: MTB, DH Handlebar Rise: 15mm Handlebar Length: 800mm (adjustable to 740mm) Handlebar Geometry: Upsweep: 4 degrees; Backsweep: 8 degrees Stem Length: Multiple options available to select Stem Stack Height: 35mm Diameter: 31.8mm Weight: Handlebar: 310g; Stem: 150g (35mm), 180g (50mm)Technologies: Dual XGT (Extreme Gradual Taper) Technology: This is a proprietary tube drawing process that tapers the bars from the thickest area at the bar clamping zone, slowly and gradually through the bend zones, to the thinnest areas at the control zones and back to thicker reinforced bar end zones, or “Impact Ends”. Spank has utilized FEA (Finite Element Analysis), laboratory, and rigorous real-world testing to optimise the spread of material to where it is needed to withstand the specific forces at work in each zone while offering better protection against crashes than ever before! The extreme precision enabled by Dual XGT drawing processes also eliminates the need for heavy hand grinding, which can result in imperfections and inconsistency in wall thickness. Impact Ends: The Impact Ends reduce the chance of collapse in areas where the wall is thinner and in heavy impacts. These can also be used to support bar ends in the relevant disciplines. CNC Bending: The precision of 3D CNC Bending in a single fixture allows Spank to optimise their designs further and to eliminate the heavy grinding process, making their bars lighter, stronger, and safer! Spank has also taken extra work hardening steps to ensure the stem clamping area of the bar is uniformly cylindrical and true, and as tough as possible. Super-6 Aluminium: This is a specially blended, highly magnesium-silicon enriched, work-hardened alloy. Super-6 offers the perfect mix of hardness, yield, fatigue life, and a superior ultimate tensile strength to standard 6 series alloys. It is ideal for the creation of thin-walled, super-stiff handlebars. Through recent adoption of Super-6 materials, Spank's Spike, Subrosa, and Oozy handlebars are now stronger and show greater resistance to deformation than ever before.Manufacturer's Part Numbers: F99E03E06000SPK Black/Grey 80cmx10mm 80cm x 15mm 35mm F99E03E06001SPK Black/Grey 80cmx10mm 80cm x 15mm 50mm Buy Spank Components from Chain Reaction Cycles, the World's Largest Online Bike Store.