Renthal Integra 35 Direct Mount MTB StemRenthal's challenge with the Integra stem was to keep the strength, stiffness and durability of the larger 35mm diameter package at the same weight as the 31.8mm equivalent. The strength, stiffness and durability were all matched to the 31.8mm equivalent, with an average of just 1.5g added to the Integra.The new Integra 35 Direct Mount stems feature the same lightweight, 6-bolt design as the original Integra II and Renthal have improved the structure of the stem.The Integra 35 uses the same C-shape clamping system as the Apex stem range, which has been increased in size to cope with the demands of top level DH racing. The use of two independent, C-shape handlebar clamps allows the stem body material to be reduced to a minimum, whilst maintaining an incredibly stiff and strong structure.The ultra-wide, 64mm handlebar clamping area increases torsional rigidity and the use of just six bolts vastly reduces overall weight. In addition, the uninterrupted clamp on the underside of the handlebar eliminates stress risers found on most other clamps, which can lead to handlebar failure.Features: Material: CNC machined 2014 aluminium body and 7075 aluminium clamps Clamp Diameter: 35mm Weight: 157g (50mm x 0mm)Buy Renthal Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Renthal Apex 35 StemThe Renthal Apex stem is a 31.8mm stem with all the quality of a 35mm stem. With the strength matched to the 31.8mm equivalent, you may think that the the 35mm diameter package would weigh far more than the average of 7g extra. This 35mm stem is also as rigid and durable as a 31.8mm stem. The Apex balances the need for a strong and durable 35mm stem without compromising its weight. This all-new Renthal Apex stem covers all sectors of mountain bike. Light enough for XC racing, stiff and strong enough for a 780mm handlebar.The Renthal Apex stem features their unique new clamping system. This allows much of the stem body material to be removed, whilst retaining the strength and stiffness demanded by modern, wide handlebars. The clamps are inserted over the small diameter section of the handlebar and slid into the centre, giving a 240deg wrap of the handlebar.The Renthal Apex construction comprises a fully CNC machined 2014 aluminium body and 7075 aluminium clamps. An oversize centre bore, extensive 3-D machining and external webbing maximise structural strength and stiffness and minimise weight.Features:Material: CNC machined 2014 aluminium body and 7075 aluminium clampsSteerer Clamp Size: 1.1/8"Clamp Diameter: 35mmWeight: 136g (50mm)Buy Renthal Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Renthal Integra II Direct Mount MTB StemThe new Integra II Direct Mount stems feature the same lightweight, 6-bolt design as the original Integra and Renthal have improved the structure of the stem. The Integra II uses the same C-shape clamping system as the Apex stem range, which has been increased in size to cope with the demands of top level DH racing.The size range has also now increased to include 45mm and 50mm lengths. Both of which are available in either zero rise or +10mm rise giving you four options.Buy Renthal Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Renthal Integra II Direct Mount MTB StemThe new Integra II Direct Mount stems feature the same lightweight, 6-bolt design as the original Integra and Renthal have improved the structure of the stem. The Integra II uses the same C-shape clamping system as the Apex stem range, which has been increased in size to cope with the demands of top level DH racing.The size range has also now increased to include 45mm and 50mm lengths. Both of which are available in either zero rise or +10mm rise giving you four options.Buy Renthal Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Renthal Apex Mountain Bike StemReady for fast cross country (XC) racing and the toughest enduro and all-mountain trails, the Apex mountain bike (MTB) stem brings you the strength, durability and firm hold you need when you’re riding at your limits. Ideal for use with modern bikes, it will instantly enhance how your bike handles by stiffening up your front end and reducing its overall weight too.Strong and Light MTB StemWith unique 240-degree handlebar clamps that allow much of the stem body material to be removed - meaning this MTB stem weighs in at 118 grams, the Apex Stem retains the strength and stiffness demanded by modern, wide handlebars. Fully CNC machined and featuring an oversize centre bore, extensive 3-D machining and external webbing to maximise structural strength and stiffness, the Renthal Apex Stem is a big upgrade to a small component.Features: Material: CNC machined from a solid billet of 2014 aluminium with 7075 aluminium clamps 3D Machined: Extensive 3D machining and external webbing increase the torsional stiffness of the stem, whilst keeping weight to a minimumHigh Quality Finish: After CNC machining, the stem is anodised and laser marked to give a very high quality and durable finish 240-Degree Clamps: The clamps are inserted over the small diameter section of the handlebar and slid into the centre, giving a 240-degree wrap of the handlebar Oversize Centre Bore: The unique handlebar clamping system opens up the front of the stem, allowing an oversize centre bore, to increase stiffness and strengthRise: +/- 6° Invertible: YesClamp Width: 46mmStack Height: 40mmClamp Diameter: 31.8mm Steerer Clamp Diameter: 28.6mm (1 1/8") Stem Cap Included: No Compatibility: 31.8mm handlebars and 1 1/8" fork steerer tubes Weight: 118g (40mm)Buy Renthal Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The strength, stiffness and durability were all matched to the 31.8mm equivalent, with an average of just 1.5g added to the Integra. The new Integra 35 Direct Mount stems feature the same lightweight, 6-bolt design as the original Integra II and Renthal have improved the structure of the stem. The Integra 35 uses the same C-shape clamping system as the Apex stem range, which has been increased in size to cope with the demands of top level DH racing. The use of two independent, C-shape handlebar clamps allows the stem body material to be reduced to a minimum, whilst maintaining an incredibly stiff and strong structure. The ultra-wide, 64mm handlebar clamping area increases torsional rigidity and the use of just six bolts vastly reduces overall weight. In addition, the uninterrupted clamp on the underside of the handlebar eliminates stress risers found on most other clamps, which can lead to handlebar failure.
Featuring a six-bolt design, a sturdy connection is assured between your bars and steerer tube, with the C-shaped clamp system providing a firm grasp around the bar, improving handling and steering on every run. Available in two lengths and with the choice of zero or 10mm rise, this superb stem is a great addition to any adventurous MTB cockpit.
Designed for use in all types of mountain biking, the Renthal Apex 35 mountain bike (MTB) stem is light enough for cross-country racing and strong enough for use with 780mm wide enduro handlebars. It also features a unique 240-degree wrap on its bar clamping section. This is designed to be inserted over the smaller section of the bar and then the bar is slid into place for a super-snug wrap and secure hold. 35mm MTB Stem with an Advanced Construction With its fully CNC machined 2014 alloy body, extensive 3-D machining and external webbing, the Renthal Apex 35 stem offers maximum structural strength with minimal weight. Also, the 7075 aluminium clamps provide a super-durable and flex-free hold no matter how hard you thrash your ride.
Details: The stem is horizontally divided down the centre which allows it to be CNC machined in two pieces. This method allows unrestricted access to the core of the stem which enables weight to be reduced to the absolute minimum without compromising strength. In addition this provides an uninterrupted U shape clamping area, which eliminates the stress risers found on most other clamps which can lead to handlebar failure. For your consideration: Have you considered purchasing the Renthal Fatbar Lite Carbon Handlebars to complete the package?
The Renthal Apex stem features a unique clamping system. This allows much of the stem body material to be removed, whilst retaining the strength and stiffness demanded by modern, wide handlebars. The clamps are inserted over the small diameter section of the handlebar and slid into the centre, giving a 240-degree wrap of the handlebar. MTB Stem with an Advanced Construction The construction on the Renthal Apex 31.8mm model comprises a fully CNC machined 2014 aluminium body and 7075 aluminium clamps. An oversize centre bore, extensive 3D machining and external webbing maximise structural strength and stiffness and minimise weight. Continuing Renthal's philosophy of giving you the choice in your set-up, the stem is available in 40, 50, 60 and 70mm lengths. Each of these sizes can be flipped to give either a +/-6-degree of rise. This gives options for riders and bikes of all size, type and style.
The Apex stem is designed for use across all varieties of riding, from XC through to all mountain and Gravity Enduro racing, the Apex stem can cut the mustard in all disciplines. The stem is lightweight and features Renthal's new 7075 series aluminium twin clamps which wrap around the bar by an impressive 240 degrees and provides a super firm grip which will never let your bar slip. The stem has been designed to be compatible with the new wide bar generation and will compliment you Carbon Renthal handlebars perfectly. No matter what your bike or your riding style, the Apex will match your style with ease.Bar Clamp: 31.8 OversizedRise: + / - 6 Degrees (Can Be Flipped)Stack Height: 40mmClamp Width: 46mm
It was only a matter of time before Renthal joined the 35mm bar clamp market and the new Integra 35 stem takes the proven Integra model and jumbo sizes it! The Integra 35 combines lightweight with an ultra-wide 64mm handlebar clamping area to offer massive strength and stiffness. There ll be no flex at all from the front end of your bike, leaving the steering feeling super precise and offering rich feedback to the bars. Fitting one of these to the front of your bike is like fitting a laser sight, just point and shoot! In typical Renthal style the Integra 35 is machined from solid aluminium, giving it that signature industrial style that Renthal is known for. Tough, stiff, light and great looking, what s not to like 35mm Clamp Version Of The Popular Integra Direct Mount Stem CNC Machined From 6082 Aluminium With 7075 Aluminium Clamps6 Bolt Configuration Reduces Hardware To Keep Weight LowUltra-Wide Bar Clamp Gives Superior StrengthWeight From 159g