The flat pedal from crankbrothers is engineered to provide the optimal interface between shoe and pedal.The 13mm external and 11mm internal thickness on the level 7 stamp provide a low profile concave pedal body that your feet sit into. Adjustable pins allow the rider to fine tune the feel.The outsole profiles of the top mountain bike show brands were analysed and the data used to create two distinct surface areas to optimise shoe/pedal contact across all of these different models. The small is designed for EU shoe sizes from 37-43, and 43-49 for large. Once the optimal sizes had been established the features required for the ideal flat pedal were also incorporated.Key Features:Concave pedal platform so that your shoe feels like it sits into the pedal and feels connected. 13mm external and 11mm internal thickness.,20 adjustable pins per pedal. 8mm in the centre of the pedal and 10mm on the outer edges.,Internals run on igus LL-glide bearing which has been exclusively formulated for crankbrothers. It performs in even the most adverse conditions out on the trails.,Small: 100mm x 100mm pedal body footprint,Large: 114mm x 111mm pedal body footprint,Available in red or black.Specification:Weight: 345g (Small), 375g (Large),Spindle: Forged scm 435 chromoly steel,Body: Forged 6061-T6,Inner bearing: Igus LL-glide bearing,Outer bearing: Igus LL-glide bearing,Body dimensions: 100mm x 100mm (Small), 114mm x 111m (Large),Pins: 10 adjustable pins per side,Warranty: 5 years.
The ultimate pedal for enduro racing and riding.The Mallet E was developed with the help of some well-known enduro athletes. 12% smaller than the Mallet DH pedals but with many of its well-loved features.There are 2 different axle lengths available 52mm or 57mm (the 57mm pedal is only available in a half black/half blue colour option). The 52mm will provide an engagement point and Q factor similar to other brands of pedals. If you have been previously using the Mallet DH pedal you may benefit from using the longer axle version. Riders who prefer a wider Q factor / have less crankarm / pedal clearance may also benefit from the longer axle pedals. Key Features:Concave pedal platform for a secure foothold. Like it's DH equivalent you get that flat pedal feel whilst running clipless.,49g lighter and 12% smaller pedal body than the crankbrothers Mallet DH pedal with a 52mm Q-Factor compared to 57mm on the DH equivalent.,Ribbed body allows for better traction when unclipped,Chamfered edges for a reduction in rock strikes,Excellent mud-shedding: the design is very open.,4-sided entry: clip in on all 4 sides of the pedal, by pushing forward or pulling backwards on the pedal.,Increased float: 6° of side-to-side rotational play. The float of the pedal allows for the rider to shift positions on the bike while keeping their feet clipped into the pedal. This allows for improved rider control and bike handling.,Fit adjustment: crankbrothers premium cleats can be adjusted for either 15° or 20° release angle. Zero-float cleats can be purchased separately (link to these).,Customise the fit between your shoe/pedal interface by using integrated traction pads. The pedals come with the 1mm tread pads fitted and include set of 2mm pads in the box.,Outer enduro cartridge bearing is designed specifically for pedals. Enduro use superior materials, grease and sealing on their bearings which are designed especially for use on a bike.,Inner Igus LL-glide bearing has been exclusively formulated for crankbrothers. It performs in even the most adverse conditions out on the trails.Double seal system combines a double lip internal seal and a new external seal to keep water and debris from entering the pedal.,Crank brothers pedals are fully re-buildable for simple maintenance. There is a consistency in parts across all pedal models, which allows for ease of servicing, this is easily done using the pedal refresh kit (CRB-16051)..
Choose to ride flat or clipped in. The new double shot is crankbrothers hybrid pedal designed half flat / half clip-in.Moulded traction pins and diamond plate area provide grip and support. Key Features:Excellent mud-shedding: machined pedal body helps further prevent mud clogging.,Fit adjustment: crankbrothers premium cleats can be adjusted for either 15° or 20° release angle. Zero-float cleats can be purchased separately (link to these).,Internals run on igus LL-glide bearing which has been exclusively formulated for crankbrothers. It performs in even the most adverse conditions out on the trails. ,Double seal system combines a double lip internal seal and a new external seal to keep water and debris from entering the pedal..Specification:Weight (per pair): 395g,Spindle: Forged SCM 435 chromoly steel,Body: A380 aluminum,Wings: Stamped steel,Spring: 300 series stainless steel,Inner bearing: Igus LL-glide bearing,Cleats: premium brass cleats included,Pins: Moulded traction pins,Release angle: 15° or 20°,Warranty: 5 years.
The Crank Brothers Eggbeater 3 clipless pedal provides the form and function of Crank Brother's exclusive four-sided entry, at a price that allows you to outfit any bike. Four-sided open design ensures quick and easy engagement every time as well as shedding mud build up fast making it perfect for XC, trail riding and cyclo-cross, be it racing or training.Key Features:Minimal & lightweight, the lightest Mountain Bike pedals in the world,Customizable float and release angle, to suit any rider,Premium bearings and Hex alloy endcap, make it easy to service the pedals,Double seal system,Traction pad compatible (1mm set included),Weight: 278g per pair,.
Crank Brothers new Stamp 7 pedal takes their individual style and forms it perfectly into a thin, crisply designed flat pedal that is uniquely available in two sizes, depending on which size shoe you shred in. Lightweight and tough forged aluminium body with 10 grippy pins per side & forged chromoly steel axleIgus LL-Glide and Enduro cartridge bearings are extremely durable5 Year warranty gives you piece of mindLightweight at just 345g per pair (small size)Small suitable for 37-43 EU shoes (100x100mm Platform)Large Suitable for 43-49 EU shoes (114x111mm Platform)With a super low profile 13mm thin platform and 10 pins per side, the Stamp 7 provides an optimal interface between shoe and pedal, helping to drop your centre of gravity while also offering improved clearance in rocky terrain. Featuring Crank Brothers latest Igus/Enduro bearings and forged Chromoly steel axle, these pedals are built to laugh in the face of adverse weather conditions and are backed up with Crank Brothers 5 Year Warranty. Lightweight, durable and with killer looks and superb quality, the Crank Brothers Stamp 7 is perfect for riders who want the ultimate thin flat pedal!
Crank Brothers new Stamp 7 pedal takes their individual style and forms it perfectly into a thin, crisply designed flat pedal that is uniquely available in two sizes, depending on which size shoe you shred in. Lightweight and tough forged aluminium body with 10 grippy pins per side & forged chromoly steel axleIgus LL-Glide and Enduro cartridge bearings are extremely durable5 Year warranty gives you piece of mindLightweight at just 345g per pair (small size)Small suitable for 37-43 EU shoes (100x100mm Platform)Large Suitable for 43-49 EU shoes (114x111mm Platform)With a super low profile 13mm thin platform and 10 pins per side, the Stamp 7 provides an optimal interface between shoe and pedal, helping to drop your centre of gravity while also offering improved clearance in rocky terrain. Featuring Crank Brothers latest Igus/Enduro bearings and forged Chromoly steel axle, these pedals are built to laugh in the face of adverse weather conditions and are backed up with Crank Brothers 5 Year Warranty. Lightweight, durable and with killer looks and superb quality, the Crank Brothers Stamp 7 is perfect for riders who want the ultimate thin flat pedal!
Crank Brothers new Stamp 7 pedal takes their individual style and forms it perfectly into a thin, crisply designed flat pedal that is uniquely available in two sizes, depending on which size shoe you shred in. Lightweight and tough forged aluminium body with 10 grippy pins per side & forged chromoly steel axleIgus LL-Glide and Enduro cartridge bearings are extremely durable5 Year warranty gives you piece of mindLightweight at just 345g per pair (small size)Small suitable for 37-43 EU shoes (100x100mm Platform)Large Suitable for 43-49 EU shoes (114x111mm Platform)With a super low profile 13mm thin platform and 10 pins per side, the Stamp 7 provides an optimal interface between shoe and pedal, helping to drop your centre of gravity while also offering improved clearance in rocky terrain. Featuring Crank Brothers latest Igus/Enduro bearings and forged Chromoly steel axle, these pedals are built to laugh in the face of adverse weather conditions and are backed up with Crank Brothers 5 Year Warranty. Lightweight, durable and with killer looks and superb quality, the Crank Brothers Stamp 7 is perfect for riders who want the ultimate thin flat pedal!
Choose to ride flat or clipped in. The new double shot 1 is Crank Brothers hybrid pedal designed half flat / half clip-in. Excellent mud shedding for when you re shredding. Moulded traction pins and diamond plate area provide grip and supportExcellent mud-shedding: machined pedal body helps further prevent mud cloggingFit adjustment: Crank Brothers premium cleats can be adjusted for either 15° or 20° release angle. Zero-float cleats can be purchased separately (link to these)Internals run on igus LL-glide bearing which has been exclusively formulated for Crank Brothers and Enduro bearings. It performs in even the most adverse conditions out on the trails.Double seal system combines a double lip internal seal and a new external seal to keep water and debris from entering the pedal.Weight (per pair): 331g Spindle: Forged scm 435 chromoly steel Body: Composite Wings: Stamped steel Spring: 300 series stainless steel Inner bearing: Igus LL-glide bearing Outer bearing: Enduro cartridge bearing Cleats: premium brass cleats included Pins: Moulded traction pins Release angle: 15° or 20° Warranty: 5 years
The Crank Brothers Candy 1 Pedals are an iconic pedal designed by Carl and Frank, the original founders of Crank Brothers, they were tired of getting stuck in mud-covered pedals with no way in or out. They realised that existing pedals were too complicated .It started with a simple question: what is the best way to attach a shoe to a crank To answer this question, Carl and Frank created a system with only two moving parts hinging on a spring. This system became known as the eggbeater pedal, and later it was adapted into the candy pedal. Cleat: Premium brass cleats includedShims: IncludedRelease Angle: 15° to 20°Warranty: 2 yearsWeight: 272g per pairSpindle: Forged scm435 chromoly steelBody: one piece compositeWings: Stamped steelSpring: 300 series stainless steelInner bearing: BushingOuter bearing: CartridgeMaximum rider weight: No restrictionsColours: Black, Blue, Red or Neon GreenThe Candy 1 is really diverse and is used by a wide range of riders. We have seen them out on the trail, at cyclocross races and even on commuter bikes. The cage around the 4-point engagement system inspires confidence and offers a great alternative to the eggbeater pedal if you want more of a pedal body surface area. As with the rest of the Crank Brothers range the pedals are fully serviceable with a level 1 / 2 service kit (product code CRB-11729). Servicing is simple and does not require any specialist tools, just a flat head screwdriver, socket wrench and 8mm allen key to hold the pedal by the axle. We recommend that the pedal is cleaned and greased every 30 hours of riding and the bearings are inspected for wear.
The Double Shot is the latest addition to Crank Brothers huge range of class-leading pedals. Unsure whether to clip in or stick flats The Double Shot has got you covered. Taking Crank Brothers Egg Beater design and basically cutting it in half, you have the awesome signature crank brothers mud shedding clip mechanism on one side and a large flat platform pedal on the other side. Ideal for beginners or those just looking for a versatile shoe for all conditions, the Double Shot is a worthy addition to the Crank Brothers range.A380 Aluminium bodyStainless steel springs/wingsForged chromoly steel axle15/20 Degree release angle52mm Q factorIgus LL-Glide & Enduro cartridge bearingsPremium brass cleats with shims included395g per pair5 Year warranty
The Double Shot is the latest addition to Crank Brothers huge range of class-leading pedals. Unsure whether to clip in or stick flats The Double Shot has got you covered. Taking Crank Brothers Egg Beater design and basically cutting it in half, you have the awesome signature crank brothers mud shedding clip mechanism on one side and a large flat platform pedal on the other side. Ideal for beginners or those just looking for a versatile shoe for all conditions, the Double Shot is a worthy addition to the Crank Brothers range.A380 Aluminium bodyStainless steel springs/wingsForged chromoly steel axle15/20 Degree release angle52mm Q factorIgus LL-Glide & Enduro cartridge bearingsPremium brass cleats with shims included395g per pair5 Year warranty
Crank Brothers new Stamp 3 pedal takes their individual style and forms it perfectly into a thin, crisply designed flat pedal that is uniquely available in two sizes, depending on which size shoe you shred in. Lightweight and tough magnesium alloy body with 10 grippy pins per side & forged chromoly steel axleIgus LL-Glide and Enduro cartridge bearings are extremely durable5 Year warranty gives you piece of mindLightweight at just 351g per pair (small size)Small suitable for 32-43 EU shoes (100x100mm Platform)Large Suitable for 43-49 EU shoes (114x111mm Platform)With a low profile 16mm thin platform and 10 pins per side, the Stamp 3 provides an optimal interface between shoe and pedal, helping to drop your centre of gravity while also offering improved clearance in rocky terrain. Featuring Crank Brothers latest Igus/Enduro bearings and forged Chromoly steel axle, these pedals are built to laugh in the face of adverse weather conditions and are backed up with Crank Brothers 5 Year Warranty. Lightweight, durable and with killer looks and superb quality, the Crank Brothers Stamp 3 is perfect for riders who want a lightweight and durable flat pedal!