crankbrothers Mallet 3 Clipless Mountain Bike PedalsThe crankbrothers Mallet 3 Pedals are now even more durable with a lightweight aluminium inner body and premium bearings.Features:Flat pedal feel with clipped-in controlAluminium platform for enhanced durability6 adjustable pins per side for grip 4-sided entry / superior mud sheddingCustomisable float & release anglePremium bearings & double seal systemSpecifications:Spindle Material: Forged SCM 435 CrMo steelBody Material: AluminiumWing Material: 17-4PH stainlessSpring Material: 300 series stainless steelQ-factor: 52mmInner Bearing type: Igus LL-glide bearingOuter Bearing type: Enduro cartridge bearingCleat: Premium brass cleats with shims includedWeight: 499g per pairBuy crankbrothers Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
crankbrothers Mallet E PedalsDesigned with Enduro racing in mind, the Mallet E Pedals from crankbrothers feature a unique concave platform that gives you a stable and secure foothold for optimum control when tackling tough trails. PerformanceThe concave pedal platform offers a more secure foothold. Like it's Downhill (DH) equivalent you get that flat pedal feel whilst running clipless. 49g lighter and 12% smaller pedal body than the crankbrothers Mallet DH pedal with a 52mm Q-Factor compared to 57mm on the DH equivalent. The ribbed body allows for better traction when unclipped whilst chamfered edges allow a reduction in rock strikes. The open design also provides excellent mud shedding. 4-sided entry: clip in on all 4 sides of the pedal, by pushing forward or pulling backwards on the pedal.FitIncreased float: 6° of side-to-side rotational play. The float of the pedal allows for the rider to shift positions on the bike while keeping their feet clipped into the pedal. This allows for improved rider control and bike handling.Fit adjustment: crankbrothers premium cleats can be adjusted for either 15° or 20° release angle. Zero-float cleats can be purchased separately.Customise the fit between your shoe/pedal interface by using integrated traction pads. The pedals come with the 1mm tread pads fitted and include set of 2mm pads in the box.DurabilityOuter enduro cartridge bearing is designed specifically for pedals. Enduro use superior materials, grease and sealing on their bearings which are designed especially for use on a bike. Inner igus LL-glide bearing has been exclusively formulated for crankbrothers. It performs in even the most adverse conditions out on the trails.The double seal system combines a double lip internal seal and a new external seal to keep water and debris from entering the pedal.MaintenanceCrankbrothers pedals are fully re-buildable for simple maintenance. There is a consistency in parts across all pedal models, which allows for ease of servicing, this is easily done using the pedal refresh kit.Features:Spindle Material: Forged SCM 435 Chromoly (CrMo) steelBody Material: 6061-T6 aluminiumWing Material: 17-4PH stainlessPins: 12 pins per pedalSpring Material: 300 series stainless steelQ-factor: 52mmInner Bearing Type: Igus LL-glide bearingOuter Bearing Type: Enduro cartridge bearingEndcap: Hex alloyCleat: Premium brass cleats with shims includedWeight: 419g per pairBuy crankbrothers Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
crankbrothers Mallet E PedalsDesigned with Enduro racing in mind, the Mallet E Pedals from crankbrothers feature a unique concave platform that gives you a stable and secure foothold for optimum control when tackling tough trails. PerformanceThe concave pedal platform offers a more secure foothold. Like it's Downhill (DH) equivalent you get that flat pedal feel whilst running clipless. 49g lighter and 12% smaller pedal body than the crankbrothers Mallet DH pedal with a 52mm Q-Factor compared to 57mm on the DH equivalent. The ribbed body allows for better traction when unclipped whilst chamfered edges allow a reduction in rock strikes. The open design also provides excellent mud shedding. 4-sided entry: clip in on all 4 sides of the pedal, by pushing forward or pulling backwards on the pedal.FitIncreased float: 6° of side-to-side rotational play. The float of the pedal allows for the rider to shift positions on the bike while keeping their feet clipped into the pedal. This allows for improved rider control and bike handling.Fit adjustment: crankbrothers premium cleats can be adjusted for either 15° or 20° release angle. Zero-float cleats can be purchased separately.Customise the fit between your shoe/pedal interface by using integrated traction pads. The pedals come with the 1mm tread pads fitted and include set of 2mm pads in the box.DurabilityOuter enduro cartridge bearing is designed specifically for pedals. Enduro use superior materials, grease and sealing on their bearings which are designed especially for use on a bike. Inner igus LL-glide bearing has been exclusively formulated for crankbrothers. It performs in even the most adverse conditions out on the trails.The double seal system combines a double lip internal seal and a new external seal to keep water and debris from entering the pedal.MaintenanceCrankbrothers pedals are fully re-buildable for simple maintenance. There is a consistency in parts across all pedal models, which allows for ease of servicing, this is easily done using the pedal refresh kit.Features:Spindle Material: Forged SCM 435 Chromoly (CrMo) steelBody Material: 6061-T6 aluminiumWing Material: 17-4PH stainlessPins: 12 pins per pedalSpring Material: 300 series stainless steelQ-factor: 52mmInner Bearing Type: Igus LL-glide bearingOuter Bearing Type: Enduro cartridge bearingEndcap: Hex alloyCleat: Premium brass cleats with shims includedWeight: 419g per pairBuy crankbrothers Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
crankbrothers Candy 7 Clip-In PedalsDesigned to increase your pedalling power, these Clip-In Pedals by crankbrothers offer a stable platform that is suitable for use with a variety of cycling disciplines including Mountain Bike (MTB), trail and cyclocross (CX).There is an ongoing debate amongst many riders about which is best, candy or eggbeater. The candy pedal provides an additional platform that is confidence-inspiring and also gives some support for those moments when you’ve unclipped but is unsure if you need to get your foot down for a dab, jump off the bike or quickly get clipped in again and put the power down.Crankbrothers pedals are fully re-buildable for simple maintenance. There is a consistency in parts across all pedal models, which allows for ease of servicing, this is easily done using the pedal refresh kit.Features:Spindle Material: Forged SCM 435 Chromoly (CrMo) steelBody Material: 6061-T6 aluminiumWing Material: 17-4PH stainlessSpring Material: 300 series stainless steelQ-factor: 52mmCleat Type: Premium brass cleats with shims includedInner Bearing Type: Igus LL-glide bearingOuter Bearing Type: Enduro cartridge bearingEndcap: Hex alloyWeight: 320g per pairBuy crankbrothers Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
crankbrothers Candy 7 Clip-In PedalsDesigned to increase your pedalling power, these Clip-In Pedals by crankbrothers offer a stable platform that is suitable for use with a variety of cycling disciplines including Mountain Bike (MTB), trail and cyclocross (CX).There is an ongoing debate amongst many riders about which is best, candy or eggbeater. The candy pedal provides an additional platform that is confidence-inspiring and also gives some support for those moments when you’ve unclipped but is unsure if you need to get your foot down for a dab, jump off the bike or quickly get clipped in again and put the power down.Crankbrothers pedals are fully re-buildable for simple maintenance. There is a consistency in parts across all pedal models, which allows for ease of servicing, this is easily done using the pedal refresh kit.Features:Spindle Material: Forged SCM 435 Chromoly (CrMo) steelBody Material: 6061-T6 aluminiumWing Material: 17-4PH stainlessSpring Material: 300 series stainless steelQ-factor: 52mmCleat Type: Premium brass cleats with shims includedInner Bearing Type: Igus LL-glide bearingOuter Bearing Type: Enduro cartridge bearingEndcap: Hex alloyWeight: 320g per pairBuy crankbrothers Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
crankbrothers Candy 11 Clipless Mountain Bike PedalsAs one of the lightest available, the Candy 11 is an excellent pedal for competitive cross country or cyclocross. With four sided entry it delivers mud shedding capabilities that are second to none. From design to construction of the Candy 11, crankbrothers really have thought of everything.To reduce weight without compromising on strength, the Candy 11 is constructed from ultra-lightweight titanium components. crankbrothers' new Integrated Traction Pad technology allows customisation of the pedal interface for a more refined fit and ruthlessly efficient power transfer. The float and release angle are customisable, to suit your individual needs.For improved traction when unclipped, the pedal body is ribbed. A hex alloy endcap and bashguard, together with chamfered edges provide protection from rock strikes. Premium bearings and a double seal system make the Candy 11 a durable pedal. With the excellent build quality, comes a 5 year crankbrothers warranty.Features: Performance pedal, ideal for competitive cross country or cyclocross One of the lightest pedals on the market 4 sided entry with superior mud shedding capabilities Lightweight and strong titanium components Premium bearings and double seal system make this a durable pedal Premium brass cleats with shims included Chamfered edges reduce rock strikes Release angle: 15°/20° Q-Factor: 52mm Weight: 249g per pair Maximum rider weight: 90kg/200lbBuy crankbrothers Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
crankbrothers Premium SPD Cleat PairMade from a very durable brass material, this pair Premium SPD Cleats are compatible with all crankbrothers clipless mountain bike (MTB) pedals. Easy to connect and disconnect from the pedals, they offer 6° of float to allow your knee to pivot naturally - a very useful feature as you’re shifting your balance on the trails.Features: Material: Premium strength brass Float: 6° Release Angle: 15° Compatibility: Eggbeater, Candy, Smarty, Acid and Mallet Shoe Compatibility: Mountain Bike (MTB) SPD type Bolt Pattern: 2-hole Adjustment: 2.2mm left/right Bolt Length: 9.5mm and 12mm bolts included Shims Included: Yes Sold as a pair (two cleats in pack) Weight: 30g per pairBuy crankbrothers Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Designed for intense mountain bike rides, these pedals feature a forged aluminium platform construction. This makes them more than capable of handling all the abuse associated with all-day epics on your MTB. Crankbrothers has also equipped these with forged CrMo (Chromoly Steel) spindles, which provide a secure connection to your cranks. This means you'll benefit from a reliable pedal stroke as you weave between the MTB trails. Spinning on premium bearings with a seal system, these MTB flat pedals are perfect for smooth and dependable off-road pedalling. Manufacturer Part Numbers: Black, Large: CRB-16366 Grey, Large: CRB-16367 Grey, Small: CRB-16369 Black, Small: CRB-16368
Instant Engagement, Exceptional Stability Featuring instant engagement, exceptional stability thanks to the high-grip platform, which is precisely concaved in design to ensure a secure foothold. It is equipped with 8 adjustable pins on each side for additional traction and confidence while the high-end premium bearings and double seal system guarantee smooth operation, and excellent durability when landing huge jumps and riding through the roughest of conditions. Exceptional Performance and Ease-Of-Use The central cleat engagement spring has 4-sided entry to ensure you will always find the clip-in point with no hassle while shedding mud efficiently. Along the central ridge, this pedal features a traction pad on both sides, which has a customisable interface and overall, the platform has a ribbed surface for customised grip while the chamfered outer edges reduce rock strikes by providing a lower pedal profile. This pedal is designed with speed in mind will help you to achieve it by providing exceptional performance and ease-of-use.
The design for the original crank brothers pedal began out of frustration. The founders of crank brothers, Carl and Frank, were tired of getting stuck in mud-covered pedals with no way in or out. They realised that existing pedals were too complicated It started with a simple question: what is the best way to attach a shoe to a crank? To answer this question, Carl and Frank created a system with only two moving parts hinging on a spring. This system became known as the eggbeater pedal, and later it was adapted into the candy pedal. A word on maintenance In order to keep your crank brothers pedals running smoothly, they recommend the following: clean pedals every 30 hours of ridingremove the pedal body from the spindle and wipe it clean of any dirty greaseapply fresh grease to the inside of the pedal before re-installing the spindle
With a variety of top features, it's not difficult to see why this is the case. These crankbrothers Mallet DH pedals provide instant engagement, a stable and high grip platform, smooth operation, and excellent durability when landing huge jumps.
It features a composite body and CrMo axle, smooth and efficient bearings, diamond plate pads and moulded pins and ribs for enhanced grip. Additionally, these come complete with an easy release cleat kit making them perfect for propelling you along your preferred route.