The crankbrothers candy is an iconic pedal designed by Carl and Frank the original founders of crankbrothers they were tired of getting stuck in mud-covered pedals with no way in or out. They realised that existing pedals were too complicated….It started with a simple question: what is the best way to attach a shoe to a crank? To answer this question Carl and Frank created a system with only two moving parts hinging on a spring. This system became known as the eggbeater pedal and later it was adapted into the candy pedal. The Candy is really diverse and is used by a wide range of riders. We have seen them out on the trail at cyclocross races and even on commuter bikes. The cage around the 4 point engagement system inspires confidence and offers a great alternative to the eggbeater pedal if you want more of a pedal body surface area. The trade up from level 1 pedals is the 2 piece machined aluminium pedal body and increased warranty to 5 years. Cleat: Premium brass cleats included Shims: Included Release Angle: 15° to 20° Warranty: 5 years Weight: 324g per pair Spindle: Forged scm435 chromoly steel Body: 2 piece machined aluminium Wings: Stamped steel Spring: 300 series stainless steel Inner bearing: Bushing Outer bearing: Cartridge Maximum rider weight: No restrictions Colours: Orange/Silver or Silver You can customise the fit and feel of your pedal using crankbrothers tread contact sleeves (CRB-13282). These shims come with 3 different thicknesses enabling the rider to ensure good contact between their shoes and the pedal axle (as the tread wears down the contact can move away from the axle and onto the wings of the pedal). As with the rest of the crankbrothers range the pedals are fully serviceable with a level 1 / 2 service kit (product code CRB-11729). Servicing is simple and does not require any specialist tools just a flat head screwdriver socket wrench and 8mm allen key to hold the pedal by the axle. We recommend that the pedal is cleaned and greased every 30 hours of riding and the bearings are inspected for wear.
The crankbrothers eggbeater is an iconic pedal designed by Carl and Frank the original founders of crankbrothers they were tired of getting stuck in mud-covered pedals with no way in or out. They realised that existing pedals were too complicated….It started with a simple question: what is the best way to attach a shoe to a crank? To answer this question Carl and Frank created a system with only two moving parts hinging on a spring. This system became known as the eggbeater pedal and later it was adapted into the candy pedal. The eggbeater's simple design gives the advantage of amazing mud shedding and 4 points of entry making it perfect for XC trail riding and cyclo cross. Cleat: Premium brass cleats included Shims: Included Release Angle: 15° to 20° Warranty: 5 years Weight: 280g per pair Spindle: Forged scm435 chromoly steel Body: cast stainless steel Wings: stamped stainless steel Spring: 300 series stainless steel Inner bearing: Bushing Outer bearing: Cartridge Maximum rider weight: No restrictions Special edition colours: Silver/Black You can customise the fit and feel of your pedal using crankbrothers tread contact sleeves (CRB-13282). They come with 3 different thicknesses enabling the rider to ensure good contact between their shoes and the pedal axle (as the tread wears down the contact can move away from the axle and onto the wings of the pedal). You may also like to run the pedals on your road / commuter bike. Buy a set of Quattro cleats (CRB-15289) to use on your road shoes. It makes pulling off from junctions a breeze as you have 4 points of entry to the pedals. As with the rest of the crankbrothers range the pedals are fully serviceable with a level 1 / 2 service kit (product code CRB-11729). Servicing is simple and does not require any specialist tools just a flat head screwdriver socket wrench and 8mm allen key to hold the pedal by the axle. We recommend that the pedal is cleaned and greased every 30 hours of riding and the bearings are inspected for wear.
Mallet pedals feature a double sided open design allowing for quick and reliable engagement with minimal mud clogging. A two piece body keeps the weight down whilst providing a strong and durable platform. Release angle: 15° to 20° Cleat: Premium brass cleats included Warranty: 5 years Weight: 428g per pair Platform: Two piece aluminium + composite Wings: Stamped steel Spring: 300 series stainless steel Spindle: Forged scm435 chromoly steel Inner bearing: Bushing Outer bearing: Cartridge Traction pins: 8mm adjustable
Size specific enthusiast-level platform pedal provides optimal shoe/pedal interface. Details Optimal surface area Minimal profile 16mm thin 10 adjustable pins per side for grip Premium bearings & seal system Stamp small recommended for shoe sizes: 4-9 (UK) // 37-43 (eu) Stamp large recommended for shoe sizes: 9-14 (UK) // 43-49 (eu) Specs adjustable pins 10 per side body material A380 Aluminum endcap T15 footprint small size footprint large size 100mm x 100mm 114mm x 111m inner bearing type Igus Bearing max rider weight No restriction outer bearing type Double Cartridge Bearing shoe size US 5-10 // EU 37-43 spindle material Forged SCM 415 Chromoly Steel warranty 5 years weight small weight large 439g per pair 494g per pair
Size specific enthusiast-level platform pedal provides optimal shoe/pedal interface. Details Optimal surface area Minimal profile 16mm thin 10 adjustable pins per side for grip Premium bearings & seal system Stamp small recommended for shoe sizes: 4-9 (UK) // 37-43 (eu) Stamp large recommended for shoe sizes: 9-14 (UK) // 43-49 (eu) Specs adjustable pins 10 per side body material A380 Aluminum endcap T15 footprint small size footprint large size 100mm x 100mm 114mm x 111m inner bearing type Igus Bearing max rider weight No restriction outer bearing type Double Cartridge Bearing shoe size US 5-10 // EU 37-43 spindle material Forged SCM 415 Chromoly Steel warranty 5 years weight small weight large 439g per pair 494g per pair
CASUAL VIBES WITH CONFIDENT GRIP The design brief was clear: Create a comfortable capable flat pedal shoe with the grip and support that recreational adventure and e-bike riders need to be confident over all kinds of terrain. The Tracker™ Fastlace fits on all points. It starts by putting the foot closer to the pedal and features a flat profile for an optimal contact patch with the pedal surface and pins. A dual-layer EVA midsole provides comfort for off the bike hikes. Finally the Tack™ Rubber outsole’s highly elastic compound allows it to stretch and form around pedal pins for excellent grip while riding rough rugged terrain making the Tracker Fastlace an ideal shoe for everyday rides and epic adventures. UPPER Textile upper Thermo-bonded PU overlays CLOSURE Single-pull Fastlace system with cordlock high-friction laces and lace keeper FOOTBED Die-cut footbed OUTSOLE Tack™ Rubber outsole Dual-layer EVA Gamma tread design optimized for pedal pins CLEAT COMPATIBILITY Flat pedal only / no cleat WEIGHT 359 grams (size 43) SIZING 39 – 50 whole sizes only
CASUAL VIBES WITH CONFIDENT GRIP The design brief was clear: Create a comfortable capable flat pedal shoe with the grip and support that recreational adventure and e-bike riders need to be confident over all kinds of terrain. The women’s Tracker™ W Fastlace fits on all points. It starts by putting the foot closer to the pedal and featuring a flat profile for an optimal contact patch with the pedal surface and pins. A dual-layer EVA midsole provides comfort for off the bike hikes. Finally the Tack™ Rubber outsole’s highly elastic compound allows it to stretch and form around pedal pins for excellent grip while riding rough rugged terrain making the Tracker Fastlace an ideal shoe for everyday rides and epic adventures. UPPER Textile upper Thermo-bonded PU overlays CLOSURE Single-pull Fastlace System with cordlock high-friction laces and lace keeper FOOTBED Die-cut footbed OUTSOLE Tack™ Rubber outsole Dual-layer EVA Gamma tread design optimized for pedal pins CLEAT COMPATIBILITY Flat pedal only / no cleat WEIGHT 323 grams (size 39) SIZING Women’s 36 – 43 whole sizes only
Engineered to be the perfect ebike shoe with maximum pedalling efficiency and walking comfort Lace closure with Mini Power Strap for a secure fit Breathable upper material for all-day comfort Toe box protection and reflective details for rider safety 3-PART PROPRIETARY SOLE CONSTRUCTION 1) POWER TRANSFER BLADE Semi-rigid midsole plate for more efficient and comfortable pedalling Reduce power loss by up to 50% compared to non-cycling shoes 2) ADAPTIVE CONTROL 360° traction with Shimano-developed block pattern engineered to interface with wide variety of pedal cages and pins 3) TRACTION CONTROL Smooth curved trekking outsole design supports a natural heel strike and foot roll Toe and heel block pattern designed to offer optimum traction on variable terrain Weight: 357g (size 42) Stiffness rating: 3
The new Vault Mag MTB pedal is here, born from our quest for production methods that are more environmentally friendly and less wasteful. Thanks to the unique use of pressure die casting technology, the Vault Magnesium achieves these goals. Best of all, it is now available at a more obtainable price. When performance is paramount, the Vault Mag flat pedal delivers at just 404g. Key Features:ED Painted black finish only.,Tried and tested at pro level.,17mm concave footbed.,Cro-Mo Axle.,High Load DU bush system.,Cartridge Bearings.,404g per pair.,Replaceable steel pins..
The S2 is the latest development on our pedal line up. We spent a long time developing the platform shape and pin placement for the best feel underfoot and the new double bush axle system is hassle free, long lasting and easy to service.Specifications:Precision engineered custom extruded 6061 alloy body,9 own design custom pin with flanged base,Chromo Axle,Sealed bearings with DU bushings,100 x 100 pedal face,1.25mm body concave which creates 2.3mm concave at the pins,Black,381g.
Key Features:XT trekking SPDs are designed for recreational riders who commute and tour,This XT trekking pedal combines SPD mechanism on one side and a stable platform pedal body and pins on the other, you can ride with cleats or normal shoes,SPD has low profile platform height with large platform contact area for excellent support and stability,Lightweight and high performance using a forged alloy body and chrome-moly axle,8 mm hex wrench mounting system,Sealed cartridge axle system for reliability and simplified low maintenance,Easy entry system with tension adjustment provides plenty of support and holds the cleat firmly in place,built in reflectors,Includes SM-SH56 multi release cleat,Weight: 392 g per pair.
Look X-Track Race Carbon Clipless MTB PedalsWith a heavy-duty engagement mechanism, the Look X-Track Race Carbon MTB Pedals have been made to handle the abuses of rocks, roots and mud, providing durable, dependable performance in a lightweight, easy-to-use package. The spindle is equipped with a double weather resitant seal to stand up to the worst conditions that you're likely to encounter on the bike and the platform size has been optimised to provide the best power to weight ratio on the market.Features: Body Material: Carbon Spindle Material: CrMo Intended Use: XC competion and leisure Pedal Stack Height: 16.8mm with cleats Platform Width: 60mm Platform Area: 515mm² Tension: 6Nm to 14Nm adjustable spring Cleats: Supplied with cleats Float: 6° Weight: Pedal: 170g; Pair with Cleats: 444gTechnologies:Optimal Power to Weight Ratio: All the energy you produce is transferred to your MTB through your pedals so their role is absolutely crucial. Look’s objective with the X-Track Race Carbon pedals was to find solutions that would enable the most efficient transfer of rider power possible. That is why Look has chosen to place the weight/contact surface ratio as the primary factor when defining the product. Generally speaking, the greater the contact surface, the more efficiently energy is transferred. On the other hand, the greater the contact surface, the more the pedal will weigh. The challenge faced by Look's engineers was to identify the zones that are useful for energy transmission and then optimise the pedal design in order to limit any that are unused. This task allowed Look to engineer a pedal with the best weight/contact surface ratio on the market.Lateral Contact Support: Lateral contact support guides your foot in finding your pedal and provides you a point of contact even if you have not yet engaged the cleat. This wide contact area prevents your foot from sliding on the pedal body and offers consistent and reassuring support.Mechanism Geometry: The forces experienced when riding in wet conditions varies greatly compared to riding in the dry but the highest performance is always expected regardless of weather conditons. The mechanism in the Look X-Track Race Carbon pedals works regardless of external conditions and more space allows for the shedding of mud, dirt and grit. These zones give the user a constant and stable feeling of being securely clipped in, in all conditions.Adjustable Spring Tension: An adjustable tension screw allows you to fine-tune the entry/release resistance of the spring mechanism to suit your personal skill level and preferred feel.Buy Look Components from Chain Reaction Cycles, the World's Largest Online Bike Store.