The design for the original crankbrothers pedal began out of frustration. The founders of crankbrothers, Carl and Frank, were tired of getting stuck in mud-covered pedals with no way in or out. They realised that existing pedals were too complicated….It started with a simple question: what is the best way to attach a shoe to a crank? To answer this question, Carl and Frank created a system with only two moving parts hinging on a spring. This system became known as the eggbeater pedal, and later it was adapted into the candy pedal. The candy 7 pedal is a clipless pedal with a platform offering improved stability across a wide range of disciplines from all mountain / trail to cyclo-cross. The pedal body is 10% larger than the level 1, 2 and 3 pedal bodies. The chamfered edges help to minimise rock strikes.There is an ongoing debate amongst many riders about which is best, candy or eggbeater. The candy pedal provides an additional platform which is confidence inspiring and also gives some support or those moments when you’ve unclipped but are unsure if you need to get your foot down for a dab, jump off the bike or quickly get clipped in again and put the power down.Key Features:Excellent mud-shedding: the design is very open.,Ribbed body for extra traction when unclipped,4-sided entry: clip in on all 4 sides of the pedal, by pushing forward or pulling backwards on the pedal.,Increased float: 6° of side-to-side rotational play. The float of the pedal allows for the rider to shift positions on the bike, while keeping their feet clipped into the pedal. This allows for improved rider control and bike handling.,Fit adjustment: crankbrothers premium cleats can be adjusted for either 15° or 20° release angle. Zero-float cleats can be purchased separately (link to these).,Customise the fit between your shoe/pedal interface by using integrated traction pads. The pedals come with the 1mm tread pads fitted and include set of 2mm pads in the box.,Chamfered edges help reduce rock strikes,Outer enduro cartridge bearing is designed specifically for pedals. Enduro use superior materials, grease and sealing on their bearings which are designed especially for use on a bike.,Inner igus LL-glide bearing has been exclusively formulated for crankbrothers. It performs in even the most adverse conditions out on the trails. ,Double seal system combines a double lip internal seal and a new external seal to keep water and debris from entering the pedal.,crankbrothers pedals are fully re-buildable for simple maintenance. There is a consistency in parts across all pedal models, which allows for ease of servicing, this is easily done using the pedal refresh kit (CRB-16051)..Specifications:Weight (per pair): 320g,Spindle: Forged scm 435 chromoly steel,Body: 6061-T6 aluminium,Wings: 17-4PH stainless,Spring: 300 series stainless steel,Inner bearing: Igus LL-glide bearing,Outer bearing: Enduro cartridge bearing,Cleats: Premium brass cleats included,Release angle: 15° or 20°,Warranty: 5 years.
The flat pedal from crankbrothers is engineered to provide the optimal interface between shoe and pedal.The 13mm external and 11mm internal thickness on the level 7 stamp provide a low profile concave pedal body that your feet sit into. Adjustable pins allow the rider to fine tune the feel.The outsole profiles of the top mountain bike show brands were analysed and the data used to create two distinct surface areas to optimise shoe/pedal contact across all of these different models. The small is designed for EU shoe sizes from 37-43, and 43-49 for large. Once the optimal sizes had been established the features required for the ideal flat pedal were also incorporated.Key Features:Concave pedal platform so that your shoe feels like it sits into the pedal and feels connected. 13mm external and 11mm internal thickness.,20 adjustable pins per pedal. 8mm in the centre of the pedal and 10mm on the outer edges.,Internals run on igus LL-glide bearing which has been exclusively formulated for crankbrothers. It performs in even the most adverse conditions out on the trails.,Small: 100mm x 100mm pedal body footprint,Large: 114mm x 111mm pedal body footprint,Available in red or black.Specification:Weight: 345g (Small), 375g (Large),Spindle: Forged scm 435 chromoly steel,Body: Forged 6061-T6,Inner bearing: Igus LL-glide bearing,Outer bearing: Igus LL-glide bearing,Body dimensions: 100mm x 100mm (Small), 114mm x 111m (Large),Pins: 10 adjustable pins per side,Warranty: 5 years.
In keeping the original 22-pin layout used on our first LG1 Pedals, our new Plus aluminium pedals use the exact same 22-pin pattern in order to achieve the same biting traction our first pedals were so well known for. The 100 x 110mm machined aluminium platform houses the 22 pins (11 per side), a big inboard bearing and two outboard bearings, and a steel axle. Fully rebuildable.
New for 2022Features:Alloy body and resin cage pedals with rubber top for grip,Ideal for folding bikes,Folding mechanism,Loose bearings,112x74x36mm,576g per pair,9/16 inch thread,
The Slater 90 pedal features a 90x90mm platform that is optimal for smaller feet. Unlike most children's pedals (plastic body, steel axle, loose ball bearing and injected moulded pins that easily wear out in weeks), the Slater 90 pedal strikes a balance between those cheap disposable plastic pedals and the uber expensive machined aluminium ones.Key Features:90mm x 90mm Platform.,Cro-Mo Axle.,6 rear loading, replaceable steel pins.,Gripper profile for enhanced pedal traction.,Fully sealed and lightweight DU Bushing design.,Weight: 310g..
Features:One piece alloy body pedals with moulded pins,Suitable for BMX or MTB bicycles,Steel axle,Loose bearings,107x112x24mm,540g per pair,9/16 inch thread.
We know... another flat pedal.Starting with a non-offset, generous 110mm x 105mm profile, the COMP Pedals ensure plenty of real estate for your feet, especially larger ones. The Comp Pedals are totally flat which pairs perfectly with modern, flat pedal shoes with stiff soles. To maximize grip, the pedals feature 18 bottom loading pins, along with ramped and undercut gripper base to enhance traction further. Spinning on a machined Cro-Mo spindle with a rebuildable bearing & bushing system, the new Comp pedals are built tough and ready to take a beating. We offer the pedals in 6 different colour ways to help complete your SDG kit and colour match perfectly with our Bel-Air V3 saddle & Thrice grips.ENDLESS GRIPKeep your feet where you left them with the superb grip on the Comp pedals. Thanks to its large 110mm x 105mm platform, 9 pins per side, and proven ramped & undercut gripper profile, the Comp pedals will keep your feet planted regardless of how wild things get on the trail.FLAT PROFILE FOR FLAT SHOESFlat pedal shoes have stiff soles that best conform to a flat pedal profile, so that's why we chose to stick with a flat profile. This ensures the best bond between your pedal and shoe and allows for all-day comfort.FEATURESMaterial - Composite Body Cage & Machined Cro-Mo Spindle.,Flat 110mm x 105mm Profile - Maximum contact patch with a flat profile to ensure complete pedal control.,9x Bottom Loading Pins Per Side - Plenty of pins to dig into your shoes and bottom loading so they're easy to replace.,Ramped & Undercut Gripper Profile - This proven shape helps to provide even more fore and aft traction.,Proven Bearing & Bushing System - These have demonstrated excellent durability and are as easy as can be to replace when they finally wear out..SPECIFICATIONLength: 110mm.,Width: 105mm.,Height: 17.25mm.,Weight: 380g per pair..
Stay fully planted as you smash the mountain. The lightweight Smash pedal offers uncompromising performance with its strategically placed pins and bulletproof extended axle design. Available in a variety of colors to match your rig.Body: Reinforced Premium Thermopoly,Axle: CNC-machined Cro-Mo,Bearings: Ultralight self-lubricating sealed bushings,Replaceable pins,Weight: 180 grams (each),Dimensions: 11 x 20 x 7 cm.
Features:Alloy body pedals with steel cage,Suitable for MTB & ATB bicycles,Steel axle,Loose bearings,109x63x22mm,385g per pair,9/16 inch thread.
Features:Alloy body pedals,Fitted with universal resin toe clips and adjustable nylon straps for easy use,9/16 inch thread.
DMR does performance composite.Presenting the V11 pedal. For those that favour the durability, compliance and affordability of composite pedals, the new benchmark choice from DMR has arrived!The V11 is moulded with the same proven shape as the multi award-winning Vault pedal, providing a huge platform with DMR’s unique concave shape that allows your foot to sit deep into the centre for supreme grip.V11’s durable glass reinforced nylon body features eleven replaceable steel pins each side for rock solid grip. All pins are secured with captive locknuts for ultimate durability. Outer pins are Vault Moto pins that sink deep into your shoe, keeping your foot well and truly planted.V11 is fully rebuildable with the same proven internals as DMR Vault pedals, guaranteeing ride after ride with no-nonsense performance.
DMR does performance composite.Presenting the V11 pedal. For those that favour the durability, compliance and affordability of composite pedals, the new benchmark choice from DMR has arrived!The V11 is moulded with the same proven shape as the multi award-winning Vault pedal, providing a huge platform with DMR’s unique concave shape that allows your foot to sit deep into the centre for supreme grip.V11’s durable glass reinforced nylon body features eleven replaceable steel pins each side for rock solid grip. All pins are secured with captive locknuts for ultimate durability. Outer pins are Vault Moto pins that sink deep into your shoe, keeping your foot well and truly planted.V11 is fully rebuildable with the same proven internals as DMR Vault pedals, guaranteeing ride after ride with no-nonsense performance.