Choose to ride flat or clipped in. The new double shot is crankbrothers hybrid pedal designed half flat / half clip-in. Key Features:Moulded traction pins and diamond plate area provide grip and support. ,Excellent mud-shedding: machined pedal body helps further prevent mud clogging. ,Fit adjustment: crankbrothers premium cleats can be adjusted for either 15° or 20° release angle. Zero-float cleats can be purchased separately (link to these). ,Internals run on igus LL-glide bearing which has been exclusively formulated for crankbrothers and Enduro bearings. It performs in even the most adverse conditions out on the trails. ,Double seal system combines a double lip internal seal and a new external seal to keep water and debris from entering the pedal..Specifications:Weight (per pair): 331g,Spindle: Forged scm 435 chromoly steel,Body: Composite,Wings: Stamped steel,Spring: 300 series stainless steel,Inner bearing: Igus LL-glide bearing,Outer bearing: Enduro cartridge bearing,Cleats: Premium brass cleats included,Pins: Moulded traction pins,Release angle: 15° or 20°,Warranty: 5 years.
Steel pedal washers designed to help protect your aluminium crank arms from scratches and damage during pedal installation..Fits most aluminium cranks.
The DMR V8 Classic is reborn. Featuring the much-loved original V8 shape, the V8 Classic now runs on dual DU bushes to give long lasting, super smooth performance.The new V8 Classic also features our original DMR logo.Corner pins can still be tuned for preferred grip (terror pins available separately) and service kits are available.Specification:90mm length x 94mm width platform area.,20mm depth.,CroMo axle.,Dual DU bush.,20 pins per pedal (8 removable).,520g per pair.,.
King-Pins are the longest pins available for the Vault Pedals.They offer further grip tuneability for your ride.Experiment alongside the Flip Pins and Moto Pins to get your ideal set up.44 steel DMR flip pins,16 x short pins (for use in the centre section of your pedals) overall length 8.5mm, thread is M4x0.7x4, stud is 4.5mm using either a 5mm spanner or 2mm allen Wrench to secure.,28 x long pins (for use in the outside edge of your pedals) overall length 14.5mm, thread is M4x0.7x10, stud is 4.5mm using either a 5mm spanner or 2mm allen Wrench to secure.,2mm allen Wrench included..
The TRAIL FUSION pedals give you superior control of your mountain bike and far greater performance than traditional flat pedals. Their wide composite platform offers increased stability, better power transmission and ultimate comfort, allowing you to pedal with confidence and get the most out of your ride. And worry no longer when the trail gets technical: each pedal face features eight replaceable pins for maximum grip. Customize your look with one of the 5 available colors and forget your limits out on the trail!WHY YOU'LL LOVE IT ?A wide platform pedal that offers a secure foothold and improved stability for improved control when riding.,The perfect upgrade for your mountain bike: wider (25%), more stable and more grip than a classic or OEM pedal.,A lightweight composite body with 8 replaceable pins for maximum comfort and grip.,5 available colors to express your personality: lime green, ice blue, red or purple to color your ride, black to keep it understated.,Infused with LOOK craftsmanship and Made in France quality..INCREDIBLE GRIP!The 8 replaceable pins offer optimal grip and traction whilst ensuring ultimate comfort and ease of use when pedaling. The concave design of the platform and its reduced profile height (just 18mm) give you the utmost efficiency and confidence as you lean into bends.RIDE WITH CONFIDENCEThe TRAIL FUSION's wide composite platform provides excellent stability and control, even if your foot is not perfectly placed in the center of the pedal. It offers a 25% greater contact area than traditional pedals, immediately giving you more confidence on technical sections and better control through curves.SIMPLE YET STYLISHWith a sleek design and 5 colors to choose from, the TRAIL FUSION pedals make matching and styling your kit and bike child’s play. Choose your perfect color and enjoy the ride!BUILT TO LASTThe TRAIL FUSION pedals are Made in France and designed to last. Their straightforward yet advanced design comes with a promise of reliability thanks to quality components that can easily be replaced when necessary to increase the lifespan of your pedals.FRENCH SAVOIR-FAIREFrom design to production, our TRAIL FUSION pedal is Made in France in our very own workshops in Nevers. The development process included several prototypes as well as numerous lab and field tests, illustrating the full extent of LOOK Cycle’s R&D expertise. Our commitment to pushing our products beyond current norms and market standards ensures we deliver uncompromising quality, performance and design.
Refresh your crankbrothers stamp 7 or 11 internal components to keep them running box fresh. Includes: Inner bearing o-ring x 2, Spindle seal x 2, Outer Igus solid bearing x 2, Inner Igus solid bearing half x 4, Bearing Retainer Bolt x 4, Outer o-ring x 2, Grease port screw x 2.
The crankbrothers candy is an iconic pedal designed by Carl and Frank, the original founders of crankbrothers, they were tired of getting stuck in mud-covered pedals with no way in or out. They realised that existing pedals were too complicated….It started with a simple question: what is the best way to attach a shoe to a crank? To answer this question, Carl and Frank created a system with only two moving parts hinging on a spring. This system became known as the eggbeater pedal, and later it was adapted into the candy pedal. The Candy is really diverse and is used by a wide range of riders. We have seen them out on the trail, at cyclocross races and even on commuter bikes. The cage around the 4 point engagement system inspires confidence and offers a great alternative to the eggbeater pedal if you want more of a pedal body surface area.Key Features:Cleat: Premium brass cleats included,Shims: Included,Release Angle: 15° to 20°,Warranty: 2 years,Weight: 272g per pair,Spindle: Forged scm435 chromoly steel,Body: one piece composite,Wings: Stamped steel,Spring: 300 series stainless steel,Inner bearing: Bushing,Outer bearing: Cartridge,Maximum rider weight: No restrictions,Colours: Black, Blue, Red or Neon Green.As with the rest of the crankbrothers range the pedals are fully serviceable with a level 1 / 2 service kit (product code CRB-11729). Servicing is simple and does not require any specialist tools, just a flat head screwdriver, socket wrench and 8mm allen key to hold the pedal by the axle. We recommend that the pedal is cleaned and greased every 30 hours of riding and the bearings are inspected for wear.
Leave The Roads Behind Technology: X-Track, Tention: X-Track, Body: Aluminium, Spindle: Chromoly + Platform, Material: Aluminium, Platform Area: 350mm² Platform, Width: 57mm, Stack Height + Cleats: 16,8 mm (10,7+6,1mm), Weight Pedal: 195g, Weight Pair + Cleat: 494g,.
Features:Alloy body and resin cage pedals with rubber top for grip,Suitable for commuting & leisure cyclists,Steel axle,Loose bearings,105x70x25mm,340g per pair,9/16 inch thread.
Outstanding value, cast alloy platform pedals with integrated grip studs. Cr-Mo axle and adjustable looseball bearings.Do you need more?Specifications:Pins Integrated (non replaceable),Axle Cr-mo,Material Cast Alloy,Bearings adjustable loose ball bearings,.
The S2 is the latest development on our pedal line up. We spent a long time developing the platform shape and pin placement for the best feel underfoot and the new double bush axle system is hassle free, long lasting and easy to service.Specifications:Precision engineered custom extruded 6061 alloy body,9 own design custom pin with flanged base,Chromo Axle,Sealed bearings with DU bushings,100 x 100 pedal face,1.25mm body concave which creates 2.3mm concave at the pins,Black,381g.
The Merge pedal blends a hard wearing and durable nylon reinforced material with metal pins for optimised performance.SpecificationsPins: Metal pins,Axle: Chromo Axle,Material: Nylon reinforced composite,Bearings: Sealed bearings with DU bushings,Dimensions: 100 x 95 x 18mm,Colour: Black.