The Thomson Carbon fibre road racing handlebar features a mild wing shape on top, clamping area wide enough for aero bars and mid-compact reach and drop. This is the modern road racing handlebar for the modern road bike. The wing section is small enough not to restrict hand movements when riding on the top and allows bar angle adjustment without locking out your wrists. Shaping on the bottom side of the wing allows housing to be taped out of the way without the use of narrow housing channels or internal routing, both of which shorten bar life. Certified to EN, tested to DIN+.Available in 40cm, 42cm, 44cm and 46cm widths78.5mm Reach137mm, 140mm, 143mm Drop, proportional to widthsToray Triple Carbon blendMoulded with EPS mandrel, improves internal layupNano Epoxy Resin for very high impact resistanceThe layup uses 3 different fibre types with different tensile strengths and tensile modulus, including High Strength carbon fibre. This helps allocate stiffness and flex where needed. All carbon fibre is produced by Toray and uses tailor-made Nano Epoxy Resin for very high impact resistance. Toray is the main supplier of carbon fibre for Boeing and Airbus.The Road bars are made in one piece, not three pieces co-moulded and glued together. The bars are moulded over an EPS mandrel to avoid wrinkles inside the layup during moulding. Most other bars are moulded over inflatable nylon bladders. 1.5K woven impact ends help prevent damage to unidirectional fibres from impact.Reach for the Road bars is 78.5mm. Drop is proportional.The road drops are:40cm - 137mm42cm - 140mm44cm - 140mm46cm - 143mm
Developed with our Oval Tech construction the T1 Carbon Handlebars are ready for any trail. 5° Upsweep and 7° Backsweep offers stable comfort for all types of riding. Available in 10, 20, 30 & 40mm rises all our carbon bars are 800m wide.Key Features: 35mm diameter, Width 800mm, 5 Degree Upsweep, 7 Degree back sweep, Available in 10mm, 20mm , 30mm and 40mm rises, Bar width cut guide markings, TAG Oval Tech Construction, Matte black finish with gloss black graphics, TAG Speed Adjust markings for levers, shifters, grips and stem, Weight – 228g (10) | 227g (20) | 232g (30) | 230g (40).
Our T1 MTB handlebars are made from 7 series aluminium and are available in both 31.8mm and 35mm diameter. They are all 800mm wide and feature a handy cutting guide, taking away the guesswork if you want to make them shorter. Match the T1 Aluminium handlebars with our Braap or Section grips and a TAG T1 Stem to fully utilise the benefits of the Speed Align System. Our aluminum mountain bike handlebars are shot-peened to give a hard-wearing and slightly textured finish that will look great on any trail, downhill, or enduro bike. Key Features:Available in 31.mm and 35mm diameter,Bar-width cutting guide markings,Anodized and shot-peened finish for maximum durability,TAG Speed Adjust markings for levers, shifters, grips, and stem.Specifications:7 Series Aluminium ,Upsweep: 5 Degree ,Width: 800mm,Rise Options: 20mm/30mm/40mm,Back-sweep: 7 Degree ,Weight - 346g (35mm dia./20mm rise) | 348g (35mm dia./30mm & 40mm rise) | 341g (31.8mm dia./20mm rise) | 352g (31.8mm dia./30mm & 40mm rise).
We took our hugely popular Hixon iC SL carbon fibre handlebar and stem combo and extended the rise from 12mm to 20mm and the width to 800mm for more aggressive trail and enduro riders.
A wider version of our hugely popular Hixon integrated cockpit trail bar now extended to a 780mm width. The same great ergonomics and a similar light weight.
RR1.0 Aero SL are crafted from a Super Light high modulus carbon fiber to ensure precise steering in a highly lightweight, race worthy design. The all-in-one combo design offers clean lines from the drop to the steerer clamping area. The ergonomic bend provides you comfortable hand positions to mitigate fatigue, keeping you both confident and in control.Specifications:Designed with focus on aerodynamic and lightweight,Aero top section with compact drop and reach,Full cable and wire integration,Integrated accessory mounting threads,Stem Angle: 84 degree,Material: Carbon monocoque with forged alloy steerer clamp,1 1/8" Steerer.
Reversible crossbar pad! Pick a side, rep Sunday, look cool.
Stolen Trap BMX HandlebarThese Trap BMX Handlebars from Stolen feature a 4-piece design using multi-butted 4130 CrMo, a 19mm crossbar and are P2 post-production heat treated. The width of the handlebars are 28" and have an 11° backsweep with a 2° upsweep.Features:4-piece designMulti-butted 4130 CrMo19mm crossbarP2 post-production heat treatedSize: 9.25″ (28.0″ wide)Sweep: 11° backsweep, 2° upsweepWeight: 978gBuy Stolen Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Stolen Roll BMX HandlebarsThis stunning bar is engineered for BMX use as it delivers the highest standard of steering and control. Ready to lead you up and over the vert ramps and around the flat surfaces of your local skatepark, this brilliant bar is multi-butted and heat-treated from a 4130 CrMo construction for maximum strength. Lightweight BMX Bar This superb model weighs in at only 928g (approx), so you'll not have to worry about adding any excess weight to your ride. This is the ultimate choice of upgrade for gravity-defying thrill-seekers who want a simple, super-strong component for tackling all the challenges that come with BMX riding.Features: Material: Multi-butted and heat-treated 4130 CrMo Use: BMX Cross Bar: 19mm Up Sweep: 3° Back Sweep: 10° Weight: 928g (approx)Buy Stolen Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Stolen Roll BMX HandlebarsThis stunning bar is engineered for BMX use as it delivers the highest standard of steering and control. Ready to lead you up and over the vert ramps and around the flat surfaces of your local skatepark, this brilliant bar is multi-butted and heat-treated from a 4130 CrMo construction for maximum strength. Lightweight BMX Bar This superb model weighs in at only 928g (approx), so you'll not have to worry about adding any excess weight to your ride. This is the ultimate choice of upgrade for gravity-defying thrill-seekers who want a simple, super-strong component for tackling all the challenges that come with BMX riding.Features: Material: Multi-butted and heat-treated 4130 CrMo Use: BMX Cross Bar: 19mm Up Sweep: 3° Back Sweep: 10° Weight: 928g (approx)Buy Stolen Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Stolen Roll BMX HandlebarsThis stunning bar is engineered for BMX use as it delivers the highest standard of steering and control. Ready to lead you up and over the vert ramps and around the flat surfaces of your local skatepark, this brilliant bar is multi-butted and heat-treated from a 4130 CrMo construction for maximum strength. Lightweight BMX Bar This superb model weighs in at only 928g (approx), so you'll not have to worry about adding any excess weight to your ride. This is the ultimate choice of upgrade for gravity-defying thrill-seekers who want a simple, super-strong component for tackling all the challenges that come with BMX riding.Features: Material: Multi-butted and heat-treated 4130 CrMo Use: BMX Cross Bar: 19mm Up Sweep: 3° Back Sweep: 10° Weight: 928g (approx)Buy Stolen Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The eTap Blip Clamps are the answer to easy shifting whilst your hands are on the tops, placing the blips perfectly in reach of your thumbs or index fingers allowing you to easy shift gears whilst sprinting or climbing. The clamps are fitted on the round portion of the drop bar and sit outside of the tape zone for easy access and tidy cable routing. The Blip Clamps are the best way to get the most out of your Blips.Fits 31.8mm round portion of drop barMounts directly to bar outside of tape zonesRight and left specificFits eTap red blips (sold separately)Material: PolypropyleneWeight: 12g (pair)