The Atmos 7k aluminium riser bar series feature a 9° back sweep and 760mm width that is trimmable by 30mm at each end for a possible width of 700mm. The bar is available in 3 rise variants: 0mm, 10mm and 20mm. Made from tough 7050 Lightweight aluminium, the bar weighs just 250g at full width.760mm wideWide to start and trimmable by 30mm each sideMade from tough 7050 lightweight aluminiumSpecifications:Clamp diameter: 31.8mmWidth: 760mmMaterial (HB): Al-7050Colour/finish (HB): Blast BlackRise (HB): 0mm, 10mm or 20mmApplication (HB): XCType (bar): RiserBack sweep (degrees): 9Upsweep (degree): 5
Clamps onto the mounting bracket of Dual Touch or Two Up stands to hold handlebars straight.
Topeak Ridecase Handlebar & Stem MountCompatible with RideCase, SmartPhone DryBag and Topeak Phone Packs. Allow RideCase or SmartPhone DryBag to be used on your another bike.Features:Material: Machined Aluminum/ Engineering Grade Plastic.Added Features: Angle Adjustable Rotates for Landscape or Portrait Viewing. Compatible with all Topeak Phone Packs.Size (L x W x H): 9.6 x 3.2 x 2.4cm/3.8” x 1.3” x 0.9” (stem cap mount).3.2 x 3.2 x 2.4cm/1.3” x 1.3” x 0.9” (handlebar mount adapter).Weight: 48g/1.69oz (stemcap mount).20g/0.70oz (handlebar mount adapter).Buy Topeak Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Topeak Bar X-Tender Gain more room or find the perfect position for lights, computers, MP3 GPS, whatever with the BarXtender. Attaches securely to the handlebars or stem and adjusts for optimum positioning. Topeak Bar X-Tender Features: Material: Engineering Grade Plastic and Steel Mount: Handlebar, Handlebar Stem Size: L x W x H 18 x 3 x 3cm (folded) 13 x 10 x 3cm (open) Weight: 116g Clamp: Fits Ø22~38mm BuyTopeak Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Topeak Handlebar Stabilizer DTHandlebar Stabilizer DT Secures front wheel and handlebar when in Dual-Touch bike stand.Features:• Weight: 130g • Size: (L x W x H) 24.6 x 3.1 x 9.9cm • Material: Aluminium/Plastic Buy Topeak Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Prepare to ride any terrain with this handlebar stabiliser.
800mm wide, offering 10mm and 20mm of centre rise together with a 9° backsweep and 5° upsweep. Built for strength with enough flex built in for all day comfort. Strong enough for all mountain/trail riding and light enough for racing.The bars are made with three different fibre types with different tensile strength and tensile modulus, including high strength carbon fibres. This helps to allocate stiffness and flex where needed.The bars are moulded with an EPS mandrel inside to avoid wrinkles inside the layup during moulding. Most other bars are moulded over inflated nylon bladders.All carbon fibre material is produced by Toray and uses tailor made nano Epoxy Resin for very high impact resistance. Toray is the main supplier of carbon fibre to Boeing and Airbus.1.5K woven impact ends help prevent damage to unidirectional fibres from shortening the bar or impact with the ground. With a lightweight and precision tolerance clamp sections, it’s the best bar for your Thomson X4 stem. It’s also certified to EN, tested to DIN+.Key Features: Centre Rise: 10mm and 20mm options., Backsweep: 9 degrees., Upsweep: 5 degrees., Toray Triple Carbon blend., Moulded with EPS mandrel, improves internal layup., Nano Epoxy Resin for very high impact resistance..
Our new 35mm x 800mm wide bar comes in 3 rise options: a centre rise 10mm, 20mm, or 35mm rise options. All 35mm bars feature a 9° backsweep and 5° upsweep. They’re built using 7050 Aluminium alloy for strength and longevity.The Elite 35mm Handlebars are butted and tapered in many steps for optimal fatigue life. Unlike most companies, Thomson produced our bars by using advanced hydraulic press forming to ensure close tolerances, precise wall thicknesses and a smooth appearance in the bends and tapered sections.Together with a 35mm Thomson X4 stem, it’s the best Aluminium cockpit in the industry.Key Features: Centre Rise: 10mm, 20mm and 25mm., Backsweep: 9 degrees., Upsweep: 5 degrees., 7050 Aluminium., Butted & tapered for optimal fatigue life., Advanced Hydraulic Press forming..
Titanium is a wonderful material for a handlebar. Not as light as carbon but for a little weight you get an unparralled ride. Strength and beauty count for something as well. This bar will look good and ride well on your bike for years. Built for 31.8mm stems, no shims are used for clamping the Thomson Titanium bar. The very best bar you can buy for a rigid MTB
Thomsons road bar features a mild wing shape on top, clamping area wide enough for aero bars, mid-compact reach and drop. This is the modern bar for the modern road bike. Monococque construction for safety and comfort. Thomsons Road bar wing section is small enough not to restrict hand movement when riding on the top and allows bar angle adjustment with out locking out your wrists. Shaping on the bottom side of the wing allows housing to be taped out of the way without the use of narrow housing channels or internal routing, both of which shorten bar life Layup uses 3 different fiber types with different tensile strengths and tensile modulus, including High Strength carbon fiber. This helps allocate stiffness and flex where needed. All carbon fiber is produced by Toray and uses tailor made Nano Epoxy Resin for very high impact resistance. Toray is the main supplier of carbon fiber for Boeing and Airbus. The Bars are molded over an EPS mandrel to avoid wrinkles inside the layup during molding. Most other bars are molded over inflatable nylon bladders
The Thomson Carbon Fibre drop bars bring the performance and dependability you have come to expect from Thomson. The line-up is available in 3 profiles and varying widths, each made from Carbon Fibre produced by Toray and uses tailor-made Nano Epoxy Resin for very high impact resistance. Available in 44cm and 46cm widths130mm Drop90mm Reach31.8mm Clamp25 degree FlareToray grade Carbon FibreThe wing section is small enough not to restrict hand movements when riding on the top and allows bar angle adjustment without locking out your wrists. Shaping on the bottom side of the wing allows housing to be taped out of the way. The Dirt Drop shares a similar top to the round road bar, measuring 31.8 as wide as possible. Each profile has exceeded the ISO 4210-2:2015 requirement.The Dirt Drop is available in 44cm, and 46cm, with 25° flare, Drop 130mm, Reach 90mm ready for your next adventure, regardless of the road you choose.
The Thomson Carbon Fibre drop bars bring the performance and dependability you have come to expect from Thomson. The line-up is available in 3 profiles and varying widths, each made from Carbon Fibre produced by Toray and uses tailor-made Nano Epoxy Resin for very high impact resistance. Available in 44cm and 46cm widths130mm Drop90mm Reach31.8mm Clamp25 degree FlareToray grade Carbon FibreThe wing section is small enough not to restrict hand movements when riding on the top and allows bar angle adjustment without locking out your wrists. Shaping on the bottom side of the wing allows housing to be taped out of the way. The Dirt Drop shares a similar top to the round road bar, measuring 31.8 as wide as possible. Each profile has exceeded the ISO 4210-2:2015 requirement.The Dirt Drop is available in 44cm, and 46cm, with 25° flare, Drop 130mm, Reach 90mm ready for your next adventure, regardless of the road you choose.