Nukeproof Digger 2022 Chainstay ProtectorThe Digger 2022 Chainstay Protector from Nukeproof is a durable and robust component for guarding your bike's chainstay against chain and rock strikes.For top-grade defence against bumps, scratches and dents on your framework, this tough frame protector will ensure your chainstay stay clean, nick-free and quieter on every ride.High Quality and Protective Chainstay CoversDesigned specifically to fit Digger 2022 models, these original Nukeproof covers offer great protection from their durable moulded silicone construction. Attaching to your chainstay via the 3M adhesive backing, it's the ideal barrier against bangs, dings and dirt.Features: Material: Moulded Silicone with 3M adhesive backing Compatibility: Digger 2022 Part Number: VLF-1362-NP-DG22Buy Nukeproof Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Kevlar Chainstay Protector The Nukeproof logo chainstay protector has evolved. The new Nukeproof Embossed logo chainstay protector is constructed from a mix of TKL (Kevlar) and neoprene; to produce a product which will provide quiet and long lasting chain slap protection for your frame.It is attached via a Velcro closure running the length of the material and to ensure it stays securely in place it has anti-slip rubber on the back. Due to the nature of the new material it is slightly less elastic than traditional neoprene chainstay protectors so you will need to order the correct size to fit your frame. Features: Medium - 24cm long x 12cm wide - Designed to fit the Nukeproof Mega TR, Scalp and Pre 2013 Mega. Large - 24cm long x 13.5cm wide - Designed to fit the Nukeproof Mega AM, Rook and Pulse.Once in place you will be amazed by how long it lasts, stays in place and how quiet your bike rides!Buy Nukeproof Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Nukeproof logo chainstay protector has evolved. The new Nukeproof Embossed logo chainstay protector is constructed from a mix of TKL (Kevlar) and neoprene; to produce a product which will give quiet and long lasting chain slap protection for your frame. It is attached via a Velcro closure running the length of the material and to ensure it stays securely in place it has anti-slip rubber on the back. Due to the nature of the new material it is slightly less elastic than traditional neoprene chainstay protectors so you will need to order the correct size to fit your frame.Nukeproof - Large Kevlar Chainstay Protector Features:Medium - 24cm long x 12cm wide - Designed to fit the Nukeproof Mega TR, Scalp and Pre 2013 Mega.,Large - 24cm long x 13.5cm wide - Designed to fit the Nukeproof Mega AM, Rook and Pulse..Once in place you will be amazed by how long it lasts, stays in place and how quiet your bike rides!
The Park Tool chainring wrench tool is very simple to use and can save valuable time during chainring changes.
The Park Tool CCP-22 uses a long comfortable handle and extra fine thread that provides the needed leverage to remove even the tightest cranks. The unique "floating tip" ensures smooth operation and long life. As with most Park Tool products, it also features a hole specifically designed for hanging on a tool wall.
The Park Tool CCP-44 is specifically designed to remove crank arms from splined Shimano® Octalink and ISIS Drive® bottom bracket spindles that do not use a self-extracting system.
The universal design of the Park Tool crank puller has a rotating tip pressed into each end of the tool (11.3mm and 16.3mm) so it will remove both square taper and splined (ISIS Drive™, Octalink®) crank arms. Also fits BNI cranks on Bosch® electric bikes (E-Bikes). The CWP-7 is made for the 22 x 1mm threading in common cranks.
Durable and lightweight for regular use, the Derailleur Screwdriver - DSD is constructed from CNC machined, hard anodised 6061 aluminium, with a 5mm precision ground flat blade for exact attachment to the components that hold your derailleur in place. The ergonomic handle makes twisting and turning as comfortable as possible when carrying out essential gear system maintenance. A well-crafted screwdriver from Park Tool, any toolkit would benefit from its addition.
This crank wrench will be of benefit to any profession or amatuer mechanics toolbox.
Made from a heat-treated alloy, the Park Tool cassette tool FR-5.2 allows for the removal of cones and locknuts. It has 12 splines that are approximately 23.4mm across, the one-inch base allows it to be used with a wench or a bench vice. Please Note: Always use a skewer or axle nut to hold tool firmly in place during removal and installation. The Park Tool FR-5.2 is designed for 12 spline 23.4mm diameter tool fittings - the most common tool fitting found on 7-12 speed cassette lockrings. It can also be found on some disc brake lockrings and Rock Shox® suspension fork top caps. Thin wall construction allows use without the removal of cones and locknuts.
Park Tool Chain Tool (CT3.3)A tough, workshop-level bike chain tool that’s fits nicely in the hand and is simple to operate, Park Tool has made its CT3.3 model with a hard-wearing investment cast steel. It’s suitable for use with all single and multi-speed chains, including modern SRAM 12-Speed and Campagnolo 13-Speed types. Certain to become your go-to tool for changing and repairing chains, this versatile tool has a replaceable pin, making it ideal for busy bike mechanics.Features:Comfortable T-handle Replaceable driving pin (replacement pins sold separately - Park Tool part number: CTP-C) Investment cast steel body Adjustable locating shelf Compatible with all 5 to 13-Speed chains, single speed 1/8", 3/16", and half link chains Please Note: The CT-3.3 will install, but not peen (flatten), Campagnolo 11, 12 and 13-speed chain rivets.Please Also Note: The shelf fastener sizing is preset to allow easy adjustment from one width chain to another - any attempt to lock the shelf in place will result in damage to the tool. Buy Park Tool Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
The all new Praxis Zayante Carbon X M30 road crank is the ultimate marriage of lightness, stiffness and versatility. Up your game with its rigid carbon arms and stout 30mm spindle. And enjoy the right gearing setup for every ride with its new X-Spider for double rings or direct-mount interface for singles.Weighing a feathery 615 grams (172.5 50/34) the Zayante Carbon M30 crank has come to play and is ready to disrupt the peloton.Key Features:4 Bolt Pattern.,160/104 BCD.,48/32, 50/34, 52/36, or 53/39 chain ring choice.,M30 Aluminium Spindle.,Requires Praxis M30 BB : BSA, BB86, BB30/PF30 (30mm Drive/28mm NonDrive).,Works with Shimano™ 10/11, Campy 10/11, SRAM 10/11.,Approximate weight 610g duo ring..