This mountain bike (MTB) frame is specifically designed for kid's and it features a tough aluminium build for a fantastic combination of strength, durability and performance. Nukeproof has also put this model through a hydroforming and triple-butting process for an extra level of resilience as your young rider perfects their skills. Another benefit is this model's comfortable kid's specific geometry and its internal routing that allows it to be used with a dropper seatpost. Coming complete with a Kevlar chainstay protector, 142x12mm rear hub spacing and a sleek design, this is a perfect upgrade for building confidence on the trails. 26" Kid's MTB Frame The Cub-Scout 26” Race is not just another kids bike: taking inspiration from Nukeproof's award-winning Scout adult hardtail range, the Cub-Scout 26” has been designed from the ground-up as a proper mini-hardtail mountain bike. It has been designed to allow kids to learn the ropes of riding, inspire confidence on the trails and act as the perfect platform for progression. Developed and tested with the help of the brand's own children, Nukeproof have created a class leading lightweight kids bike range to inspire and nurture budding future World Cup or EWS winners! The range of Cub-Scout Hardtail frames are available in 20”, 24” or 26” options; meaning that there should be a Cub-Scout to suit kids of all sizes from aged 5 and up. Each frame features a lightweight custom butted 6061 Alloy frameset with bang up to date long, low and slack kids specific geometry. Features: Material: Hydroformed 6061 Triple-Butted Aluminium Fork Travel: 120mm Axle to Crown: 514mm Fork Offset: 46mm Wheels Size: 26" Max Tyre Size: 2.6" Sizing: One Size Headtube: 44mm Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 (For Tapered fork) Seatpost: 27.2mm (Internal routing for dropper seatpost) Seat Clamp: 31.8mm BB: Threaded 68mm BSA Rear Hub: 142x12mm Rear Axle: M12*1.5 Thread x168mm (Thread Length 17mm) Chain Guide: ISCG05 Brake Mount: 160mm Direct Post Protection: Kevlar Chainstay Protector Weight: 2.8kg Specification: Frame: Nukeproof Cub-Scout 26”, custom triple butted hydro-formed 6061 Alloy Internal routing for Dropper Seatpost Threaded 68mm BB 142mm rear axle spacing Kevlar chainstay protector Headset: Nukeproof, 44/56IITS
The Neutron V2 Rear Wheel from Nukeproof has been completely redesigned from the ground up and gives riders incredibly fast and smooth rolling performance on every ride. It features 36 points of engagement and comes in a range of freehub options. Nukeproof has also made freehubs available separately and easy to change if you choose to upgrade your drivetrain in the future.Rim Material: 6066 AlloyUse: MTB, Trail, All Mountain, Enduro and DHWheel Size: 27.5" or 29" options availableSpacing Options: 142x12mm, 148x12mm, 150/157x12mmConversion Options: 142x12mm can be converted to 135mm QR, 148x12mm HG / XD can be converted to 141mm Boost with end caps (sold separately)Rear Hub Engagement: 36 points of engagement (every 10°)Freehub Options: Shimano HG, Shimano Micro spline, or SRAM XDSpoke Type: J-BendSpoke Count: 32Lacing Pattern: 3xDisc Mount: 6-boltInner Rim Width: 28mmExternal Rim Width: 32mmRim Height: 18mmTubeless Ready: Yes Pre-taped and valve suppliedSingle or Pair: SingleBuild: Hand builtWeight: 15mm Boost Front: 905g including valve & tape; 148mm Boost HG Rear: 1045g including valve and tapeThe 142mm hub can be converted to 135mm QR and the 148mm HG / XD hub can be converted to 141mm using end caps. The hub has been machined to remove excess material and make it as strong and light as possible. Nukeproof have increased the thickness of pawl springs in these hubs to give secure engagement on every pedal stroke.The 6066 alloy rim has been extensively to ensure it is a rim which is light enough for aggressive trail riding but strong enough for DH. Nukeproof have used J-Bend spokes meaning tensioning and spoke replacement is much simpler than using a straight pull spoke.The wheels come taped with tubeless valve installed so all you need to do is add sealant and your tyre to get a finished tubeless setup. The valve supplied is Nukeproof's Horizon valve which also has a core remover built into the cap. This valve is also compatible with tyre inserts like Nukeproof ARD.
These flat pedals are engineered for aggressive trail-riding as they deliver an amazing strength to weight ratio. They feature a hard-wearing aluminium platform construction, which makes them ideal at withstanding all the intensity that comes with shredding the mountain bike trails. Nukeproof has also put these through a forging and CNC-machining process, which shaves off any unnecessary weight while also allowing them to maintain their rock-solid durability. Sam Hill MTB PedalsDeveloped by mountain bike legend Sam Hill and long-time mechanic Jacy Schumilak, these MTB pedals are designed for maximum off-road performance. Using all the proven internal parts of the Horizon Pro pedals, these signature enduro pedals spin on high-quality DU bushings with two sealed cartridge bearings. In addition, the Nukeproof Horizon Ti Sam Hill Enduro Race Pedals are also equipped with titanium axles, so you'll enjoy their incredible robustness without any excess weight. Key Features: Body Material: Forged and CNC-machined 6061-T6 Aluminium,Axle Material: Titanium,Use: MTB, Enduro,Axle: 9/16",Bushings: 2x DU bushings,Bearings: 4x sealed Z989 cartridge bearings (per pair),Spare Pins Included: No,Part Number: 102270558SH03PEDFLTIBLK,Weight: 337g (approx).
The Nukeproof Neutron V2 Rear Wheel 36t has been completely redesigned from the ground up and gives riders incredibly fast and smooth-rolling performance on every ride.This rear wheel features 36 points of engagement and comes in a range of freehub options. Nukeproof has also made freehubs available separately and easy to change if you choose to upgrade your drivetrain in the future.The 142mm hub can be converted to 135mm QR and the 148mm hub can be converted to 141mm using end caps. The hub has been machined to remove excess material and make it as strong and light as possible. Nukeproof have increased the thickness of pawl springs in these hubs to give secure engagement on every pedal stroke.The 6066 alloy rim has been extensively to ensure it is a rim which is light enough for aggressive trail riding but strong enough for DH.Nukeproof have used J-Bend spokes meaning tensioning and spoke replacement is much simpler than using a straight pull spoke.The wheels come taped with tubeless valve installed so all you need to do is add sealant and your tyre to get a finished tubeless setup. The valve supplied is Nukeproof's Horizon valve which also has a core remover built into the cap. This valve is also compatible with tyre inserts like Nukeproof ARD.Spoke length’s on the front wheels are the same regardless of spacing, the length changes with wheel size:Wheelsize: 27.5", Spacing: 142mm / 148mm x 12mm, Non-Driveside: 274, Driveside: 272Wheelsize: 27.5", Spacing: 150mm / 157mm x 12mm, Non-Driveside: 274, Driveside: 273Wheelsize: 29", Spacing: 142mm / 148mm x 12mm, Non-Driveside: 292, Driveside: 290Wheelsize: 29", Spacing: 150mm / 157mm x 12mm, Non-Driveside: 292, Driveside: 291Conversion kits and replacement end caps available separately.Key Features: Rim Material: 6066 Alloy, Use: MTB, Trail, All Mountain, Enduro and DH, Spacing Options: 142x12mm, 148x12mm, 150/157x12mm, Conversion Options: 142x12mm can be converted to 135mm QR; 148x12mm can be converted to 141mm Boost with end caps (sold separately), Rear Hub Engagement: 36 points of engagement (every 10 degrees), Freehub Options: Shimano HG, Shimano Microspline or SRAM XD, Spokes: Spoke Type: J-Bend; Spoke Count: 32; Lacing Pattern: 3x; Disc Mount: 6-bolt, Width: Inner Rim Width: 29mm; External Rim Width: 33mm; Rim Height: 18mm, Tubeless Ready: Yes - Pretaped and valve supplied; Single or Pair: Single, Weight: 15mm Boost Front: 905g including valve & tape; 148mm Boost HG Rear: 1045g including valve and tape.
The Nukeproof Neutron V2 Rear Wheel 36t has been completely redesigned from the ground up and gives riders incredibly fast and smooth-rolling performance on every ride.This rear wheel features 36 points of engagement and comes in a range of freehub options. Nukeproof has also made freehubs available separately and easy to change if you choose to upgrade your drivetrain in the future.The 142mm hub can be converted to 135mm QR and the 148mm hub can be converted to 141mm using end caps. The hub has been machined to remove excess material and make it as strong and light as possible. Nukeproof have increased the thickness of pawl springs in these hubs to give secure engagement on every pedal stroke.The 6066 alloy rim has been extensively to ensure it is a rim which is light enough for aggressive trail riding but strong enough for DH.Nukeproof have used J-Bend spokes meaning tensioning and spoke replacement is much simpler than using a straight pull spoke.The wheels come taped with tubeless valve installed so all you need to do is add sealant and your tyre to get a finished tubeless setup. The valve supplied is Nukeproof's Horizon valve which also has a core remover built into the cap. This valve is also compatible with tyre inserts like Nukeproof ARD.Spoke length’s on the front wheels are the same regardless of spacing, the length changes with wheel size:Wheelsize: 27.5", Spacing: 142mm / 148mm x 12mm, Non-Driveside: 274, Driveside: 272Wheelsize: 27.5", Spacing: 150mm / 157mm x 12mm, Non-Driveside: 274, Driveside: 273Wheelsize: 29", Spacing: 142mm / 148mm x 12mm, Non-Driveside: 292, Driveside: 290Wheelsize: 29", Spacing: 150mm / 157mm x 12mm, Non-Driveside: 292, Driveside: 291Conversion kits and replacement end caps available separately.Key Features: Rim Material: 6066 Alloy, Use: MTB, Trail, All Mountain, Enduro and DH, Spacing Options: 142x12mm, 148x12mm, 150/157x12mm, Conversion Options: 142x12mm can be converted to 135mm QR; 148x12mm can be converted to 141mm Boost with end caps (sold separately), Rear Hub Engagement: 36 points of engagement (every 10 degrees), Freehub Options: Shimano HG, Shimano Microspline or SRAM XD, Spokes: Spoke Type: J-Bend; Spoke Count: 32; Lacing Pattern: 3x; Disc Mount: 6-bolt, Width: Inner Rim Width: 29mm; External Rim Width: 33mm; Rim Height: 18mm, Tubeless Ready: Yes - Pretaped and valve supplied; Single or Pair: Single, Weight: 15mm Boost Front: 905g including valve & tape; 148mm Boost HG Rear: 1045g including valve and tape.
Extensively engineered to offer the optimum balance of impact strength and fatigue resistance, the Horizon CL's have an all-new SPD cleat engagement. With input and influence from Nukeproof's Pro team riders Matti Lehikoinen and Mike Jones, you can be sure your getting kit that's designed to get you on the podium. All New SPD Cleat System The SPD cleat engagement system is dual sided and unique to Nukeproof, but it does support all other brands of SPD devices too. Pedals are supplied with a cleat offering +4 degrees of float, with a +8 degree cleat available to purchase separately. Click here for a Step by Step Installation Guide
Nukeproof Horizon CL Ti Downhill Flat MTB PedalsThe Nukeproof Horizon CL Ti DH Pedals take inspiration from the hugely popular Horizon Pro flat pedal and feature a titanium axle for the ultimate in low weight and strength. Extensively engineered to offer the optimum balance of impact strength and fatigue resistance, the Horizon CL's have an all-new SPD cleat engagement. With input and influence from Nukeproof's Pro team riders Matti Lehikoinen and Mike Jones, you can be sure your getting kit that's designed to get you on the podium.All New SPD Cleat SystemThe SPD cleat engagement system is dual sided and unique to Nukeproof, but it does support all other brands of SPD devices too. Pedals are supplied with a cleat offering +4 degrees of float, with a +8 degree cleat available to purchase separately.Should you happen to prefer longer cleat bolts or simply to fine-tune your riding experience, you can find the Long Nukeproof Cleat Bolts HERE This pedal is fully serviceable. It can be stripped and rebuilt using the guide hereClick here for a Step by Step Installation GuideFeatures: Cold forged T1- 6061 alloy body with CNC finishing Tough and lightweight Titanium axle Proven axle system- 2 x high quality DU bushings & 4 x sealed cartridge bearings (Per Pair) Low profile contoured chassis with optimised leading edge Side Support Platform Dual Engagement Mechanism SPD compatible Weight: 462gClipless Pedal instructions available to download here (.pdf)Buy Nukeproof Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Nukeproof Horizon CS CroMo Pedals are the slightly smaller version of Nukeproof's the new SPD compatible range and take inspiration from the hugely successful Horizon Pro flat pedal. They offer the optimum balance of impact strength, fatigue resistance and low weight. With design input and influence from Nukeproof's Pro team riders Matti Lehikoinen and Mike Jones, you can be sure your getting a platform that's built to win.All New SPD Cleat SystemThe SPD cleat engagement system is dual sided and unique to Nukeproof, but it does support all other brands of SPD devices too. Pedals are supplied with a cleat offering +4 degrees of float, with a +8 degree cleat available to purchase separately.Key Features:Cold forged T1- 6061 alloy body with CNC finishing,Tough and lightweight CrMo axle,Proven axle system- 2 x high quality DU bushings & 4 x sealed cartridge bearings (Per Pair),Low profile contoured chassis with optimised leading edge,Side Support Platform,Dual Engagement Mechanism,SPD compatible,Weight: 352g.
The Nukeproof Horizon CL Ti Pedals have been extensively engineered to exact standards and take inspiration from the hugely successful Horizon Pro flat pedal. They offer the optimum balance of impact strength, fatigue resistance, low weight, and now feature an all-new SPD cleat engagement. With input and influence from Nukeproof's Pro team riders Matti Lehikoinen and Mike Jones, you can be sure your getting a platform that's designed to win.All New SPD Cleat SystemThe SPD cleat engagement system is dual sided and unique to Nukeproof, but it does support all other brands of SPD devices too. Pedals are supplied with a cleat offering +4 degrees of float, with a +8 degree cleat available to purchase separately.Key Features:Cold forged T1- 6061 alloy body with CNC finishing.Tough and lightweight Titanium axle.Proven axle system- 2 x high quality DU bushings & 4 x sealed cartridge bearings (Per Pair).Low profile contoured chassis with optimised leading edge.Side Support Platform.Dual Engagement Mechanism.SPD compatible.Weight: 430g.
Nukeproof Horizon V2 Rear Wheel 102tThis MTB rear wheel features a revised design, which gives you fast and smooth-rolling performance as you shred the trails. Coming equipped with Nukeproof's extensively trailed and tested alloy blend, its rim construction is specifically made to meet the demands of both enduro and DH riders. Producing a hardness similar to 7-series alloy but with the ductility and yield properties of a 6-series, this rear wheel gives you the best of both worlds in terms of strength, stiffness and weight.Nukeproof has ensured this rear wheel's rim profile is the same as the front (sold separately), with the only difference being that the rear has a thicker sidewall for added strength on the trails. Another benefit is it comes equipped with J-bend spokes, which means that tensioning and spoke replacement is quick and easy.Enduro ABEC 5 BearingsAfter extensive testing with various brands of bearings, Nukeproof chose to use Enduro ABEC 5 bearings in this rear wheel. These bearings have the “LLU/LLB” seal type, which uses two lips that make light contact in a groove to create a labyrinth where the water or dirt has a more difficult time to penetrate. LLU seals are similar, only the contact pressure or interference fit is greater to seal better. Enduro bearings have 80% grease fill on both sides whereas most other bearings have 35% grease fill on one side. This delivers full coverage, so there are no dry areas as well as avoiding metal on metal contact or wear. This means that the axle feels tight out of the box and after a couple of rides it will become free.Nukeproof Horizon V2 HubThis MTB rear wheel features a revised Nukeproof Horizon V2 hub that now has 102 points of engagement and comes in a range of freehub options. Freehubs are also available separately and easily changeable if you choose upgrade your drivetrain in the future. Nukeproof's 142mm hub can be converted to 135mm QR and the 148mm HG / XD hub can be converted to 141mm using end caps. The hub has also been machined to remove excess material and make it as strong and light as possible. Nukeproof has fitted these hubs with our louder pawls & springs, this gives the wheel a nice buzz as you head down the trail. If you prefer the quiet life, you can get the quieter ones which are available separately. What's Included?Wheels come taped with tubeless valve installed so all you need to do is fit your tyre and add sealant. The tubeless valve supplied is the new Nukeproof Horizon valve which is compatible with Nukeproof ARD and other tyre inserts aswell as the cap having a core remover built in. A full range of spares are available to service your hub in the future. Spoke length's on Nukeproof wheels are the same regardless of spacing, the length changes with wheel size: Wheel Wheel Size Non Drive Side Spoke Length Driveside Spoke Length Rear 27.5" 271 268 Rear 29" 289 286 Conversion kits and replacement end caps available separately. Caps Nukeproof Part Number Replacement or Conversion Rear 135mm QR NUKHORV2R135CAPS Convert Non Boost 142mm hub to QR Rear 141mm NUKHORV2R141BCAPS Convert Boost 148mm HG / XD hub to 141mm QR (It is not possible to convert Nukeproof's 148mm microspline hubs to QR) Rear 142/148/157mm NUKHORV2R148CAPS Replacement caps for 142mm, 148mm and 157mm Rear 150mm NUKHORV2R150CAPS Replacement 150mm caps Features: Rim Material: Alloy Nukeproof Blend Use: MTB, All Mountain, Enduro and DH Spacing Options: 142x12mm; 148x12mm and 150/157x12mm Conversion Options: 142x12mm can be converted to 135mm QR, 148x12mm HG / XD can be converted to 141mm Boost with end caps (sold separately) Freehub Options: Shimano HG, Shimano Microspline and SRAM XD Rear Hub Engagement: 102 points of engagement (every 3.52°) Wheel Size: 27.5" or 29" options Inner Rim Width: 30mm Outer Rim Width: 35mm Rim Height: 21.6mm Tubeless Ready: Yes, pre-taped and valve supplied Spoke Count: 32 Spoke Type: J-Bend Disc Mount: 6-Bolt Lacing Pattern: 3x Build: Hand built Single or Pair: Single Weight: 27.5” 148x12mm HG: 1093g; 27.5” 150x12mm HG: 1116g, 29” 148mm x 12mm XD: 1146g (All weights include tape & valve)Buy Nukeproof Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Ready for fast-paced and aggressive trail-riding, this rear wheel has gone through extensive testing to meet the demands of both Enduro and DH riders. It features a special blend of alloy material, which produces a hardness similar to 7-series alloy, but with the ductility and yield properties of a 6-series. This gives you the best of both worlds in terms of stiffness, strength and weight. Nukeproof has also ensured this rear wheel's rim profile is the same as the front (sold separately), the only difference is the rear has a thicker sidewall for added strength on the trails. One final highlight is it comes equipped with J-bend spokes, which means that tensioning and spoke replacement is as simple as possible. Enduro ABEC 5 Bearings After extensive testing with various brands of bearings, Nukeproof chose to use Enduro ABEC 5 bearings in this rear wheel. These bearings have the “LLU/LLB” seal type, which uses two lips that make light contact in a groove to create a labyrinth where the water or dirt has a more difficult time to penetrate. LLU seals are similar, only the contact pressure or interference fit is greater to seal better. Enduro bearings have 80% grease fill on both sides whereas most other bearings have 35% grease fill on one side. This delivers full coverage, so there are no dry areas as well as avoiding metal on metal contact or wear. This means that the axle feels tight out of the box and after a couple of rides it will become free. Nukeproof Horizon V2 Hub This MTB rear wheel features a revised Nukeproof Horizon V2 hub that now has 102 points of engagement and comes in a range of freehub options. Freehubs are also available separately and easily changeable if you choose upgrade your drivetrain in the future. Nukeproof's 142mm hub can be converted to 135mm QR and the 148mm HG / XD hub can be converted to 141mm using end caps. The hub has also been machined to remove excess material and make it as strong and light as possible. Nukeproof has fitted these hubs with our louder pawls & springs, this gives the wheel a nice buzz as you head down the trail. If you prefer the quiet life, you can get the quieter ones which are available separately. What's Included? Wheels come taped with tubeless valve installed so all you need to do is fit your tyre and add sealant. The tubeless valve supplied is the new Nukeproof Horizon valve which is compatible with Nukeproof ARD and other tyre inserts as well as the cap having a core remover built in. A full range of spares are available to service your hub in the future. Spoke length’s on Nukeproof wheels are the same regardless of spacing, the length changes with wheel size: Wheel Size Non Drive Side Spoke Length Driveside Spoke Length 27.5" 271 268 29" 289 286 Conversion kits and replacement end caps available separately Caps Nukeproof Part Number Replacement or Conversion Rear 135mm QR NUKHORV2R135CAPS Convert Non Boost 142mm hub to QR Rear 141mm NUKHORV2R141BCAPS Convert Boost 148mm HG / XD hub to 141mm QR (It is not possible to convert Nukeproof's 148mm microspline hubs to QR) Rear 142/148/157mm NUKHORV2R148CAPS Replacement caps for 142mm, 148mm and 157mm Rear 150mm NUKHORV2R150CAPS Replacement 150mm caps
Nukeproof Horizon V2 Rear Wheel 102tThis MTB rear wheel features a revised design, which gives you fast and smooth-rolling performance as you shred the trails. Coming equipped with Nukeproof's extensively trailed and tested alloy blend, its rim construction is specifically made to meet the demands of both enduro and DH riders. Producing a hardness similar to 7-series alloy but with the ductility and yield properties of a 6-series, this rear wheel gives you the best of both worlds in terms of strength, stiffness and weight.Nukeproof has ensured this rear wheel's rim profile is the same as the front (sold separately), with the only difference being that the rear has a thicker sidewall for added strength on the trails. Another benefit is it comes equipped with J-bend spokes, which means that tensioning and spoke replacement is quick and easy.Enduro ABEC 5 BearingsAfter extensive testing with various brands of bearings, Nukeproof chose to use Enduro ABEC 5 bearings in this rear wheel. These bearings have the “LLU/LLB” seal type, which uses two lips that make light contact in a groove to create a labyrinth where the water or dirt has a more difficult time to penetrate. LLU seals are similar, only the contact pressure or interference fit is greater to seal better. Enduro bearings have 80% grease fill on both sides whereas most other bearings have 35% grease fill on one side. This delivers full coverage, so there are no dry areas as well as avoiding metal on metal contact or wear. This means that the axle feels tight out of the box and after a couple of rides it will become free.Nukeproof Horizon V2 HubThis MTB rear wheel features a revised Nukeproof Horizon V2 hub that now has 102 points of engagement and comes in a range of freehub options. Freehubs are also available separately and easily changeable if you choose upgrade your drivetrain in the future. Nukeproof's 142mm hub can be converted to 135mm QR and the 148mm HG / XD hub can be converted to 141mm using end caps. The hub has also been machined to remove excess material and make it as strong and light as possible. Nukeproof has fitted these hubs with our louder pawls & springs, this gives the wheel a nice buzz as you head down the trail. If you prefer the quiet life, you can get the quieter ones which are available separately. What's Included?Wheels come taped with tubeless valve installed so all you need to do is fit your tyre and add sealant. The tubeless valve supplied is the new Nukeproof Horizon valve which is compatible with Nukeproof ARD and other tyre inserts aswell as the cap having a core remover built in. A full range of spares are available to service your hub in the future. Spoke length's on Nukeproof wheels are the same regardless of spacing, the length changes with wheel size: Wheel Wheel Size Non Drive Side Spoke Length Driveside Spoke Length Rear 27.5" 271 268 Rear 29" 289 286 Conversion kits and replacement end caps available separately. Caps Nukeproof Part Number Replacement or Conversion Rear 135mm QR NUKHORV2R135CAPS Convert Non Boost 142mm hub to QR Rear 141mm NUKHORV2R141BCAPS Convert Boost 148mm HG / XD hub to 141mm QR (It is not possible to convert Nukeproof's 148mm microspline hubs to QR) Rear 142/148/157mm NUKHORV2R148CAPS Replacement caps for 142mm, 148mm and 157mm Rear 150mm NUKHORV2R150CAPS Replacement 150mm caps Features: Rim Material: Alloy Nukeproof Blend Use: MTB, All Mountain, Enduro and DH Spacing Options: 142x12mm; 148x12mm and 150/157x12mm Conversion Options: 142x12mm can be converted to 135mm QR, 148x12mm HG / XD can be converted to 141mm Boost with end caps (sold separately) Freehub Options: Shimano HG, Shimano Microspline and SRAM XD Rear Hub Engagement: 102 points of engagement (every 3.52°) Wheel Size: 27.5" or 29" options Inner Rim Width: 30mm Outer Rim Width: 35mm Rim Height: 21.6mm Tubeless Ready: Yes, pre-taped and valve supplied Spoke Count: 32 Spoke Type: J-Bend Disc Mount: 6-Bolt Lacing Pattern: 3x Build: Hand built Single or Pair: Single Weight: 27.5” 148x12mm HG: 1093g; 27.5” 150x12mm HG: 1116g, 29” 148mm x 12mm XD: 1146g (All weights include tape & valve)Buy Nukeproof Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Horizon V2 Rear Wheel 102tThis MTB rear wheel features a revised design, which gives you fast and smooth-rolling performance as you shred the trails. Coming equipped with Nukeproof's extensively trailed and tested alloy blend, its rim construction is specifically made to meet the demands of both enduro and DH riders. Producing a hardness similar to 7-series alloy but with the ductility and yield properties of a 6-series, this rear wheel gives you the best of both worlds in terms of strength, stiffness and weight.Nukeproof has ensured this rear wheel's rim profile is the same as the front (sold separately), with the only difference being that the rear has a thicker sidewall for added strength on the trails. Another benefit is it comes equipped with J-bend spokes, which means that tensioning and spoke replacement is quick and easy.Enduro ABEC 5 BearingsAfter extensive testing with various brands of bearings, Nukeproof chose to use Enduro ABEC 5 bearings in this rear wheel. These bearings have the “LLU/LLB” seal type, which uses two lips that make light contact in a groove to create a labyrinth where the water or dirt has a more difficult time to penetrate. LLU seals are similar, only the contact pressure or interference fit is greater to seal better. Enduro bearings have 80% grease fill on both sides whereas most other bearings have 35% grease fill on one side. This delivers full coverage, so there are no dry areas as well as avoiding metal on metal contact or wear. This means that the axle feels tight out of the box and after a couple of rides it will become free.Nukeproof Horizon V2 HubThis MTB rear wheel features a revised Nukeproof Horizon V2 hub that now has 102 points of engagement and comes in a range of freehub options. Freehubs are also available separately and easily changeable if you choose upgrade your drivetrain in the future. Nukeproof's 142mm hub can be converted to 135mm QR and the 148mm HG / XD hub can be converted to 141mm using end caps. The hub has also been machined to remove excess material and make it as strong and light as possible. Nukeproof has fitted these hubs with our louder pawls & springs, this gives the wheel a nice buzz as you head down the trail. If you prefer the quiet life, you can get the quieter ones which are available separately. What's Included?Wheels come taped with tubeless valve installed so all you need to do is fit your tyre and add sealant. The tubeless valve supplied is the new Nukeproof Horizon valve which is compatible with Nukeproof ARD and other tyre inserts aswell as the cap having a core remover built in. A full range of spares are available to service your hub in the future. Spoke length's on Nukeproof wheels are the same regardless of spacing, the length changes with wheel size: Wheel Wheel Size Non Drive Side Spoke Length Driveside Spoke Length Rear 27.5" 271 268 Rear 29" 289 286 Conversion kits and replacement end caps available separately. Caps Nukeproof Part Number Replacement or Conversion Rear 135mm QR NUKHORV2R135CAPS Convert Non Boost 142mm hub to QR Rear 141mm NUKHORV2R141BCAPS Convert Boost 148mm HG / XD hub to 141mm QR (It is not possible to convert Nukeproof's 148mm microspline hubs to QR) Rear 142/148/157mm NUKHORV2R148CAPS Replacement caps for 142mm, 148mm and 157mm Rear 150mm NUKHORV2R150CAPS Replacement 150mm caps Features: Rim Material: Alloy Nukeproof Blend Use: MTB, All Mountain, Enduro and DH Spacing Options: 142x12mm; 148x12mm and 150/157x12mm Conversion Options: 142x12mm can be converted to 135mm QR, 148x12mm HG / XD can be converted to 141mm Boost with end caps (sold separately) Freehub Options: Shimano HG, Shimano Microspline and SRAM XD Rear Hub Engagement: 102 points of engagement (every 3.52°) Wheel Size: 27.5" or 29" options Inner Rim Width: 30mm Outer Rim Width: 35mm Rim Height: 21.6mm Tubeless Ready: Yes, pre-taped and valve supplied Spoke Count: 32 Spoke Type: J-Bend Disc Mount: 6-Bolt Lacing Pattern: 3x Build: Hand built Single or Pair: Single Weight: 27.5” 148x12mm HG: 1093g; 27.5” 150x12mm HG: 1116g, 29” 148mm x 12mm XD: 1146g (All weights include tape & valve)Buy Nukeproof Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Horizon V2 Rear Wheel 102tThis MTB rear wheel features a revised design, which gives you fast and smooth-rolling performance as you shred the trails. Coming equipped with Nukeproof's extensively trailed and tested alloy blend, its rim construction is specifically made to meet the demands of both enduro and DH riders. Producing a hardness similar to 7-series alloy but with the ductility and yield properties of a 6-series, this rear wheel gives you the best of both worlds in terms of strength, stiffness and weight.Nukeproof has ensured this rear wheel's rim profile is the same as the front (sold separately), with the only difference being that the rear has a thicker sidewall for added strength on the trails. Another benefit is it comes equipped with J-bend spokes, which means that tensioning and spoke replacement is quick and easy.Enduro ABEC 5 BearingsAfter extensive testing with various brands of bearings, Nukeproof chose to use Enduro ABEC 5 bearings in this rear wheel. These bearings have the “LLU/LLB” seal type, which uses two lips that make light contact in a groove to create a labyrinth where the water or dirt has a more difficult time to penetrate. LLU seals are similar, only the contact pressure or interference fit is greater to seal better. Enduro bearings have 80% grease fill on both sides whereas most other bearings have 35% grease fill on one side. This delivers full coverage, so there are no dry areas as well as avoiding metal on metal contact or wear. This means that the axle feels tight out of the box and after a couple of rides it will become free.Nukeproof Horizon V2 HubThis MTB rear wheel features a revised Nukeproof Horizon V2 hub that now has 102 points of engagement and comes in a range of freehub options. Freehubs are also available separately and easily changeable if you choose upgrade your drivetrain in the future. Nukeproof's 142mm hub can be converted to 135mm QR and the 148mm HG / XD hub can be converted to 141mm using end caps. The hub has also been machined to remove excess material and make it as strong and light as possible. Nukeproof has fitted these hubs with our louder pawls & springs, this gives the wheel a nice buzz as you head down the trail. If you prefer the quiet life, you can get the quieter ones which are available separately. What's Included?Wheels come taped with tubeless valve installed so all you need to do is fit your tyre and add sealant. The tubeless valve supplied is the new Nukeproof Horizon valve which is compatible with Nukeproof ARD and other tyre inserts aswell as the cap having a core remover built in. A full range of spares are available to service your hub in the future. Spoke length's on Nukeproof wheels are the same regardless of spacing, the length changes with wheel size: Wheel Wheel Size Non Drive Side Spoke Length Driveside Spoke Length Rear 27.5" 271 268 Rear 29" 289 286 Conversion kits and replacement end caps available separately. Caps Nukeproof Part Number Replacement or Conversion Rear 135mm QR NUKHORV2R135CAPS Convert Non Boost 142mm hub to QR Rear 141mm NUKHORV2R141BCAPS Convert Boost 148mm HG / XD hub to 141mm QR (It is not possible to convert Nukeproof's 148mm microspline hubs to QR) Rear 142/148/157mm NUKHORV2R148CAPS Replacement caps for 142mm, 148mm and 157mm Rear 150mm NUKHORV2R150CAPS Replacement 150mm caps Features: Rim Material: Alloy Nukeproof Blend Use: MTB, All Mountain, Enduro and DH Spacing Options: 142x12mm; 148x12mm and 150/157x12mm Conversion Options: 142x12mm can be converted to 135mm QR, 148x12mm HG / XD can be converted to 141mm Boost with end caps (sold separately) Freehub Options: Shimano HG, Shimano Microspline and SRAM XD Rear Hub Engagement: 102 points of engagement (every 3.52°) Wheel Size: 27.5" or 29" options Inner Rim Width: 30mm Outer Rim Width: 35mm Rim Height: 21.6mm Tubeless Ready: Yes, pre-taped and valve supplied Spoke Count: 32 Spoke Type: J-Bend Disc Mount: 6-Bolt Lacing Pattern: 3x Build: Hand built Single or Pair: Single Weight: 27.5” 148x12mm HG: 1093g; 27.5” 150x12mm HG: 1116g, 29” 148mm x 12mm XD: 1146g (All weights include tape & valve)Buy Nukeproof Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Horizon V2 Rear Wheel 102tThis MTB rear wheel features a revised design, which gives you fast and smooth-rolling performance as you shred the trails. Coming equipped with Nukeproof's extensively trailed and tested alloy blend, its rim construction is specifically made to meet the demands of both enduro and DH riders. Producing a hardness similar to 7-series alloy but with the ductility and yield properties of a 6-series, this rear wheel gives you the best of both worlds in terms of strength, stiffness and weight.Nukeproof has ensured this rear wheel's rim profile is the same as the front (sold separately), with the only difference being that the rear has a thicker sidewall for added strength on the trails. Another benefit is it comes equipped with J-bend spokes, which means that tensioning and spoke replacement is quick and easy.Enduro ABEC 5 BearingsAfter extensive testing with various brands of bearings, Nukeproof chose to use Enduro ABEC 5 bearings in this rear wheel. These bearings have the “LLU/LLB” seal type, which uses two lips that make light contact in a groove to create a labyrinth where the water or dirt has a more difficult time to penetrate. LLU seals are similar, only the contact pressure or interference fit is greater to seal better. Enduro bearings have 80% grease fill on both sides whereas most other bearings have 35% grease fill on one side. This delivers full coverage, so there are no dry areas as well as avoiding metal on metal contact or wear. This means that the axle feels tight out of the box and after a couple of rides it will become free.Nukeproof Horizon V2 HubThis MTB rear wheel features a revised Nukeproof Horizon V2 hub that now has 102 points of engagement and comes in a range of freehub options. Freehubs are also available separately and easily changeable if you choose upgrade your drivetrain in the future. Nukeproof's 142mm hub can be converted to 135mm QR and the 148mm HG / XD hub can be converted to 141mm using end caps. The hub has also been machined to remove excess material and make it as strong and light as possible. Nukeproof has fitted these hubs with our louder pawls & springs, this gives the wheel a nice buzz as you head down the trail. If you prefer the quiet life, you can get the quieter ones which are available separately. What's Included?Wheels come taped with tubeless valve installed so all you need to do is fit your tyre and add sealant. The tubeless valve supplied is the new Nukeproof Horizon valve which is compatible with Nukeproof ARD and other tyre inserts aswell as the cap having a core remover built in. A full range of spares are available to service your hub in the future. Spoke length's on Nukeproof wheels are the same regardless of spacing, the length changes with wheel size: Wheel Wheel Size Non Drive Side Spoke Length Driveside Spoke Length Rear 27.5" 271 268 Rear 29" 289 286 Conversion kits and replacement end caps available separately. Caps Nukeproof Part Number Replacement or Conversion Rear 135mm QR NUKHORV2R135CAPS Convert Non Boost 142mm hub to QR Rear 141mm NUKHORV2R141BCAPS Convert Boost 148mm HG / XD hub to 141mm QR (It is not possible to convert Nukeproof's 148mm microspline hubs to QR) Rear 142/148/157mm NUKHORV2R148CAPS Replacement caps for 142mm, 148mm and 157mm Rear 150mm NUKHORV2R150CAPS Replacement 150mm caps Features: Rim Material: Alloy Nukeproof Blend Use: MTB, All Mountain, Enduro and DH Spacing Options: 142x12mm; 148x12mm and 150/157x12mm Conversion Options: 142x12mm can be converted to 135mm QR, 148x12mm HG / XD can be converted to 141mm Boost with end caps (sold separately) Freehub Options: Shimano HG, Shimano Microspline and SRAM XD Rear Hub Engagement: 102 points of engagement (every 3.52°) Wheel Size: 27.5" or 29" options Inner Rim Width: 30mm Outer Rim Width: 35mm Rim Height: 21.6mm Tubeless Ready: Yes, pre-taped and valve supplied Spoke Count: 32 Spoke Type: J-Bend Disc Mount: 6-Bolt Lacing Pattern: 3x Build: Hand built Single or Pair: Single Weight: 27.5” 148x12mm HG: 1093g; 27.5” 150x12mm HG: 1116g, 29” 148mm x 12mm XD: 1146g (All weights include tape & valve)Buy Nukeproof Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Horizon V2 Rear Wheel 102tThis MTB rear wheel features a revised design, which gives you fast and smooth-rolling performance as you shred the trails. Coming equipped with Nukeproof's extensively trailed and tested alloy blend, its rim construction is specifically made to meet the demands of both enduro and DH riders. Producing a hardness similar to 7-series alloy but with the ductility and yield properties of a 6-series, this rear wheel gives you the best of both worlds in terms of strength, stiffness and weight.Nukeproof has ensured this rear wheel's rim profile is the same as the front (sold separately), with the only difference being that the rear has a thicker sidewall for added strength on the trails. Another benefit is it comes equipped with J-bend spokes, which means that tensioning and spoke replacement is quick and easy.Enduro ABEC 5 BearingsAfter extensive testing with various brands of bearings, Nukeproof chose to use Enduro ABEC 5 bearings in this rear wheel. These bearings have the “LLU/LLB” seal type, which uses two lips that make light contact in a groove to create a labyrinth where the water or dirt has a more difficult time to penetrate. LLU seals are similar, only the contact pressure or interference fit is greater to seal better. Enduro bearings have 80% grease fill on both sides whereas most other bearings have 35% grease fill on one side. This delivers full coverage, so there are no dry areas as well as avoiding metal on metal contact or wear. This means that the axle feels tight out of the box and after a couple of rides it will become free.Nukeproof Horizon V2 HubThis MTB rear wheel features a revised Nukeproof Horizon V2 hub that now has 102 points of engagement and comes in a range of freehub options. Freehubs are also available separately and easily changeable if you choose upgrade your drivetrain in the future. Nukeproof's 142mm hub can be converted to 135mm QR and the 148mm HG / XD hub can be converted to 141mm using end caps. The hub has also been machined to remove excess material and make it as strong and light as possible. Nukeproof has fitted these hubs with our louder pawls & springs, this gives the wheel a nice buzz as you head down the trail. If you prefer the quiet life, you can get the quieter ones which are available separately. What's Included?Wheels come taped with tubeless valve installed so all you need to do is fit your tyre and add sealant. The tubeless valve supplied is the new Nukeproof Horizon valve which is compatible with Nukeproof ARD and other tyre inserts aswell as the cap having a core remover built in. A full range of spares are available to service your hub in the future. Spoke length's on Nukeproof wheels are the same regardless of spacing, the length changes with wheel size: Wheel Wheel Size Non Drive Side Spoke Length Driveside Spoke Length Rear 27.5" 271 268 Rear 29" 289 286 Conversion kits and replacement end caps available separately. Caps Nukeproof Part Number Replacement or Conversion Rear 135mm QR NUKHORV2R135CAPS Convert Non Boost 142mm hub to QR Rear 141mm NUKHORV2R141BCAPS Convert Boost 148mm HG / XD hub to 141mm QR (It is not possible to convert Nukeproof's 148mm microspline hubs to QR) Rear 142/148/157mm NUKHORV2R148CAPS Replacement caps for 142mm, 148mm and 157mm Rear 150mm NUKHORV2R150CAPS Replacement 150mm caps Features: Rim Material: Alloy Nukeproof Blend Use: MTB, All Mountain, Enduro and DH Spacing Options: 142x12mm; 148x12mm and 150/157x12mm Conversion Options: 142x12mm can be converted to 135mm QR, 148x12mm HG / XD can be converted to 141mm Boost with end caps (sold separately) Freehub Options: Shimano HG, Shimano Microspline and SRAM XD Rear Hub Engagement: 102 points of engagement (every 3.52°) Wheel Size: 27.5" or 29" options Inner Rim Width: 30mm Outer Rim Width: 35mm Rim Height: 21.6mm Tubeless Ready: Yes, pre-taped and valve supplied Spoke Count: 32 Spoke Type: J-Bend Disc Mount: 6-Bolt Lacing Pattern: 3x Build: Hand built Single or Pair: Single Weight: 27.5” 148x12mm HG: 1093g; 27.5” 150x12mm HG: 1116g, 29” 148mm x 12mm XD: 1146g (All weights include tape & valve)Buy Nukeproof Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Completely redesigned from the ground up, the Nukeproof Horizon V2 Rear Wheel 102t delivers fast and smooth-rolling performance across every inch of the mountain.Ready for fast-paced and aggressive trail-riding, this rear wheel has gone through extensive testing to meet the demands of both Enduro and DH riders. It features a special blend of alloy material, which produces a hardness similar to 7-series alloy, but with the ductility and yield properties of a 6-series.This gives you the best of both worlds in terms of stiffness, strength and weight. Nukeproof has also ensured this rear wheel's rim profile is the same as the front (sold separately), the only difference is the rear has a thicker sidewall for added strength on the trails. One final highlight is it comes equipped with J-bend spokes, which means that tensioning and spoke replacement is as simple as possible. Enduro ABEC 5 BearingsAfter extensive testing with various brands of bearings, Nukeproof chose to use Enduro ABEC 5 bearings in this rear wheel. These bearings have the “LLU/LLB” seal type, which uses two lips that make light contact in a groove to create a labyrinth where the water or dirt has a more difficult time to penetrate. LLU seals are similar, only the contact pressure or interference fit is greater to seal better.Enduro bearings have 80% grease fill on both sides whereas most other bearings have 35% grease fill on one side. This delivers full coverage, so there are no dry areas as well as avoiding metal on metal contact or wear. This means that the axle feels tight out of the box and after a couple of rides it will become free.Nukeproof Horizon V2 Hub This MTB rear wheel features a revised Nukeproof Horizon V2 hub that now has 102 points of engagement and comes in a range of freehub options. Freehubs are also available separately and easily changeable if you choose upgrade your drivetrain in the future.Nukeproof's 142mm hub can be converted to 135mm QR and the 148mm hub can be converted to 141mm using end caps. The hub has also been machined to remove excess material and make it as strong and light as possible. Nukeproof has fitted these hubs with our louder pawls & springs, this gives the wheel a nice buzz as you head down the trail. If you prefer the quiet life, you can get the quieter ones which are available separately.What's Included? Wheels come taped with tubeless valve installed so all you need to do is fit your tyre and add sealant. The tubeless valve supplied is the new Nukeproof Horizon valve which is compatible with Nukeproof ARD and other tyre inserts aswell as the cap having a core remover built in.A full range of spares are available to service your hub in the future.Spoke length’s on Nukeproof wheels are the same regardless of spacing, the length changes with wheel size:Rear 27.5" Wheel: Non-Drive Side: 271, Driveside: 268 Rear 29" Wheel: Non-Drive Side: 289, Driveside: 286 Key Features: Rim Material: Alloy Nukeproof Blend,Use: Trail / All Mountain / Enduro / DH,Rim Width: Inner: 30mm; External: 35mm; Rim Height: 21.6mm,Spacing Options: 142x12mm; 148x12mm; 150/157x12mm,Conversion options: 142x12mm can be converted to 135mm QR, 148x12mm can be converted to 141mm Boost with end caps (sold separately),Rear hub engagement: 102 points of engagement (every 3.52 degrees),Freehub options: Shimano HG, Shimano Microspline, SRAM XD,Spoke Type: J-Bend; Spoke count: 32; Lacing pattern: 3x,Disc Mount: 6-Bolt,Tubeless Ready: Yes - Pre-taped and valve supplied;,Build: Handbuilt .
Completely redesigned from the ground up, the Nukeproof Horizon V2 Rear Wheel 102t delivers fast and smooth-rolling performance across every inch of the mountain.Ready for fast-paced and aggressive trail-riding, this rear wheel has gone through extensive testing to meet the demands of both Enduro and DH riders. It features a special blend of alloy material, which produces a hardness similar to 7-series alloy, but with the ductility and yield properties of a 6-series.This gives you the best of both worlds in terms of stiffness, strength and weight. Nukeproof has also ensured this rear wheel's rim profile is the same as the front (sold separately), the only difference is the rear has a thicker sidewall for added strength on the trails. One final highlight is it comes equipped with J-bend spokes, which means that tensioning and spoke replacement is as simple as possible. Enduro ABEC 5 BearingsAfter extensive testing with various brands of bearings, Nukeproof chose to use Enduro ABEC 5 bearings in this rear wheel. These bearings have the “LLU/LLB” seal type, which uses two lips that make light contact in a groove to create a labyrinth where the water or dirt has a more difficult time to penetrate. LLU seals are similar, only the contact pressure or interference fit is greater to seal better.Enduro bearings have 80% grease fill on both sides whereas most other bearings have 35% grease fill on one side. This delivers full coverage, so there are no dry areas as well as avoiding metal on metal contact or wear. This means that the axle feels tight out of the box and after a couple of rides it will become free.Nukeproof Horizon V2 Hub This MTB rear wheel features a revised Nukeproof Horizon V2 hub that now has 102 points of engagement and comes in a range of freehub options. Freehubs are also available separately and easily changeable if you choose upgrade your drivetrain in the future.Nukeproof's 142mm hub can be converted to 135mm QR and the 148mm hub can be converted to 141mm using end caps. The hub has also been machined to remove excess material and make it as strong and light as possible. Nukeproof has fitted these hubs with our louder pawls & springs, this gives the wheel a nice buzz as you head down the trail. If you prefer the quiet life, you can get the quieter ones which are available separately.What's Included? Wheels come taped with tubeless valve installed so all you need to do is fit your tyre and add sealant. The tubeless valve supplied is the new Nukeproof Horizon valve which is compatible with Nukeproof ARD and other tyre inserts aswell as the cap having a core remover built in.A full range of spares are available to service your hub in the future.Spoke length’s on Nukeproof wheels are the same regardless of spacing, the length changes with wheel size:Rear 27.5" Wheel: Non-Drive Side: 271, Driveside: 268 Rear 29" Wheel: Non-Drive Side: 289, Driveside: 286 Key Features: Rim Material: Alloy Nukeproof Blend,Use: Trail / All Mountain / Enduro / DH,Rim Width: Inner: 30mm; External: 35mm; Rim Height: 21.6mm,Spacing Options: 142x12mm; 148x12mm; 150/157x12mm,Conversion options: 142x12mm can be converted to 135mm QR, 148x12mm can be converted to 141mm Boost with end caps (sold separately),Rear hub engagement: 102 points of engagement (every 3.52 degrees),Freehub options: Shimano HG, Shimano Microspline, SRAM XD,Spoke Type: J-Bend; Spoke count: 32; Lacing pattern: 3x,Disc Mount: 6-Bolt,Tubeless Ready: Yes - Pre-taped and valve supplied;,Build: Handbuilt .
The Nukeproof Horizon V2 Rear Wheel features a revised design, which gives you fast and smooth-rolling performance as you shred the trails. Coming equipped with Nukeproof's extensively trailed and tested alloy blend, its rim construction is specifically made to meet the demands of both enduro and DH riders. Producing a hardness similar to 7-series alloy but with the ductility and yield properties of a 6-series, this rear wheel gives you the best of both worlds in terms of strength, stiffness and weight.Rim Material: Alloy Nukeproof BlendUse: MTB, All Mountain, Enduro and DHSpacing Options: 142x12mm; 148x12mm and 150/157x12mmConversion Options: 142x12mm can be converted to 135mm QR, 148x12mm HG / XD can be converted to 141mm Boost with end caps (sold separately)Freehub Options: Shimano HG, Shimano Micro spline and SRAM XDRear Hub Engagement: 102 points of engagement (every 3.52°)Wheel Size: 27.5" or 29" optionsInner Rim Width: 30mmOuter Rim Width: 35mmRim Height: 21.6mmTubeless Ready: Yes, pre-taped and valve suppliedSpoke Count: 32Spoke Type: J-BendDisc Mount: 6-BoltLacing Pattern: 3xBuild: Hand builtSingle or Pair: SingleWeight: 27.5 148x12mm HG: 1093g; 27.5 150x12mm HG: 1116g, 29 148mm x 12mm XD: 1146g (All weights include tape & valve)Nukeproof has ensured this rear wheel's rim profile is the same as the front (sold separately), with the only difference being that the rear has a thicker sidewall for added strength on the trails. Another benefit is it comes equipped with J-bend spokes, which means that tensioning and spoke replacement is quick and easy.Enduro ABEC 5 Bearings - After extensive testing with various brands of bearings, Nukeproof chose to use Enduro ABEC 5 bearings in this rear wheel. These bearings have the LLU/LLB seal type, which uses two lips that make light contact in a groove to create a labyrinth where the water or dirt has a more difficult time to penetrate. LLU seals are similar, only the contact pressure or interference fit is greater to seal better. Enduro bearings have 80% grease fill on both sides whereas most other bearings have 35% grease fill on one side. This delivers full coverage, so there are no dry areas as well as avoiding metal on metal contact or wear. This means that the axle feels tight out of the box and after a couple of rides it will become free.Nukeproof Horizon V2 Hub - This MTB rear wheel features a revised Nukeproof Horizon V2 hub that now has 102 points of engagement and comes in a range of freehub options. Freehubs are also available separately and easily changeable if you choose to upgrade your drivetrain in the future.Nukeproof's 142mm hub can be converted to 135mm QR and the 148mm HG / XD hub can be converted to 141mm using end caps. The hub has also been machined to remove excess material and make it as strong and light as possible. Nukeproof has fitted these hubs with our louder pawls & springs, this gives the wheel a nice buzz as you head down the trail. If you prefer the quiet life, you can get the quieter ones which are available separately.What's Included - Wheels come taped with tubeless valve installed so all you need to do is fit your tyre and add sealant. The tubeless valve supplied is the new Nukeproof Horizon valve which is compatible with Nukeproof ARD and other tyre inserts as well as the cap having a core remover built in. A full range of spares are available to service your hub in the future.
The Solum 260 frame features a robust and lightweight alloy frame that is ideal for 100mm-travel suspension forks and has modern geometry that's optimised for use with 26" wheels and offers tyre clearance for wide 2.3" tyres. Re-introducing the Solum! Originally introduced to the Nukeproof range back in 2013; the 4130 Steel Solum was Nukeproof's first dirt jump specific frame offering that was designed to bridge the gap between BMX and MTB. The brand new solum picks up where the old one left off but brings the idea bang-up to date. With revised geometry and an all-new lightweight yet bombproof aluminium chassis, the Solum is ready for anything at your local pump track, sessioning your dirt jump spot or racing dual slalom and 4-Cross. Features: All new hydroformed 6061-T6 Custom Triple-Butted Aluminium tube set One Piece Chain Stay Yoke Reinforced Seat Stay bridge Single-speed Specific 44-56 Tapered Headtube Integrated Chain Tugs with Horizontal Drop Out External Cable routing for easy maintenance 135x10mm hub spacing Threaded 73mm Bottom Bracket Max Chainring Size: 32T Max Tyre Clearance: 2.3” 160IS Brake Mount Headset and seat clamp included