Nukeproof Blackline Microbaffle JacketIf you're looking for a versatile jacket that works as a technical mid-layer but is just as good as a warm everyday jacket, the Nukeproof Microbaffle Jacket does it all. It's light, packable and resistant to the elements, perfect for cooler days.Filled with PrimaLoft® Insulation ThermoPlume® which is a 100% post-consumer insulation comprised of small, silky plumes of fibre that mimic the lightweight warmth, softness and compressibility of natural goose down. Made from 100% post-consumer recycled (PCN) polyester, this all-synthetic package features down comparable-performance insulating loft, wet weather protection and compressibility.Constructed with micro baffles for a slim profile that makes it perfect for layering, this jacket is super packable, folding into the internal pocket. Both shell and jacket lining are made from 100% Recycled Nylon, which is wind-resistant and synthetic down proof with a durable water-repellant (DWR) treatment. Two zipped hand pockets are ideal for all of your essentials, while elasticated cuffs and an adjustable lower hem are there to let you lock in as much warmth as possible. Plus, a YKK zipper with a silicone-grippy puller is easy to open and release heat even with gloves on.Features:Materials: Shell: Shell: 100% Recycled Polyamide: Insulation: 100% Post consumer-recycled polyesterPowered by PrimaLoft® ThermoPlume® 100% recycled bluesign® approved insulationWater-resistant ripstop outer fabricLightweight packable, ideal for layering in cold conditions or as an outer layerYKK zipper with insulated zipper guardTwo zipped hand pocketsZipper internal pocket doubles as a pack-away pouchAdjustable hem with glove-friendly toggle adjustersBuy Nukeproof Clothing from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Blackline Microbaffle JacketIf you're looking for a versatile jacket that works as a technical mid-layer but is just as good as a warm everyday jacket, the Nukeproof Microbaffle Jacket does it all. It's light, packable and resistant to the elements, perfect for cooler days.Filled with PrimaLoft® Insulation ThermoPlume® which is a 100% post-consumer insulation comprised of small, silky plumes of fibre that mimic the lightweight warmth, softness and compressibility of natural goose down. Made from 100% post-consumer recycled (PCN) polyester, this all-synthetic package features down comparable-performance insulating loft, wet weather protection and compressibility.Constructed with micro baffles for a slim profile that makes it perfect for layering, this jacket is super packable, folding into the internal pocket. Both shell and jacket lining are made from 100% Recycled Nylon, which is wind-resistant and synthetic down proof with a durable water-repellant (DWR) treatment. Two zipped hand pockets are ideal for all of your essentials, while elasticated cuffs and an adjustable lower hem are there to let you lock in as much warmth as possible. Plus, a YKK zipper with a silicone-grippy puller is easy to open and release heat even with gloves on.Features:Materials: Shell: Shell: 100% Recycled Polyamide: Insulation: 100% Post consumer-recycled polyesterPowered by PrimaLoft® ThermoPlume® 100% recycled bluesign® approved insulationWater-resistant ripstop outer fabricLightweight packable, ideal for layering in cold conditions or as an outer layerYKK zipper with insulated zipper guardTwo zipped hand pocketsZipper internal pocket doubles as a pack-away pouchAdjustable hem with glove-friendly toggle adjustersBuy Nukeproof Clothing from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Blackline Microbaffle JacketIf you're looking for a versatile jacket that works as a technical mid-layer but is just as good as a warm everyday jacket, the Nukeproof Microbaffle Jacket does it all. It's light, packable and resistant to the elements, perfect for cooler days.Filled with PrimaLoft® Insulation ThermoPlume® which is a 100% post-consumer insulation comprised of small, silky plumes of fibre that mimic the lightweight warmth, softness and compressibility of natural goose down. Made from 100% post-consumer recycled (PCN) polyester, this all-synthetic package features down comparable-performance insulating loft, wet weather protection and compressibility.Constructed with micro baffles for a slim profile that makes it perfect for layering, this jacket is super packable, folding into the internal pocket. Both shell and jacket lining are made from 100% Recycled Nylon, which is wind-resistant and synthetic down proof with a durable water-repellant (DWR) treatment. Two zipped hand pockets are ideal for all of your essentials, while elasticated cuffs and an adjustable lower hem are there to let you lock in as much warmth as possible. Plus, a YKK zipper with a silicone-grippy puller is easy to open and release heat even with gloves on.Features:Materials: Shell: Shell: 100% Recycled Polyamide: Insulation: 100% Post consumer-recycled polyesterPowered by PrimaLoft® ThermoPlume® 100% recycled bluesign® approved insulationWater-resistant ripstop outer fabricLightweight packable, ideal for layering in cold conditions or as an outer layerYKK zipper with insulated zipper guardTwo zipped hand pocketsZipper internal pocket doubles as a pack-away pouchAdjustable hem with glove-friendly toggle adjustersBuy Nukeproof Clothing from Chain Reaction Cycles, the World's Largest Online Bike Store.
Filled with PrimaLoft® Insulation ThermoPlume® which is a 100% post-consumer insulation comprised of small, silky plumes of fibre that mimic the lightweight warmth, softness and compressibility of natural goose down. Made from 100% post-consumer recycled (PCN) polyester, this all-synthetic package features down comparable-performance insulating loft, wet weather protection and compressibility. Constructed with micro baffles for a slim profile that makes it perfect for layering, this jacket is super packable, folding into the internal pocket. Both shell and jacket lining are made from 100% Recycled Nylon, which is wind-resistant and synthetic down proof with a durable water-repellant (DWR) treatment. Two zipped hand pockets are ideal for all of your essentials, while elasticated cuffs and an adjustable lower hem are there to let you lock in as much warmth as possible. Plus, a YKK zipper with a silicone-grippy puller is easy to open and release heat even with gloves on.
All set for day-long trail riding adventures, this mountain bike (MTB) frame is specifically designed for kid's who want to progress into the world of mountain bike riding. It features a high-quality 6061 triple-butted aluminium build, which makes this frame more than capable of handling all the knocks and bumps associated with your kid practising and perfecting their skill. With its comfortable geometry, 20" wheel size and Kevlar chainstay protector, this is a great choice of upgrade for building confidence, wherever their next ride takes them. 20" Kid's MTB Frame The Cub-Scout 20” Race is not just another kids bike: taking inspiration from Nukeproof's award-winning Scout adult hardtail range, the Cub-Scout 20” has been designed from the ground-up as a proper mini-hardtail mountain bike. It has been designed to allow kids to learn the ropes of riding, inspire confidence on the trails and act as the perfect platform for progression. Developed and tested with the help of the brand's own children, Nukeproof have created a class-leading lightweight kids bike range to inspire and nurture budding future World Cup or EWS winners! The range of Cub-Scout Hardtail frames are available in 20”, 24” or 26” options; meaning that there should be a Cub-Scout to suit kids of all sizes from aged 5 and up. Each frame features a lightweight custom butted 6061 Alloy frameset with bang up to date long, low and slack kids specific geometry. Features: Material: Hydroformed 6061 Triple-Butted Aluminium Fork Travel: 80mm Axle to Crown: 385mm Fork Offset: 38mm Wheels Size: 20" Max Tyre Size: 2.6" Sizing: One Size Headtube: 44mm Semi-Integrated Headset: ZS44-28.6 - T2 / EX44/40 – B5 (For Tapered Steerer fork) Seatpost: 27.2mm Seat Clamp: 31.8mm BB: Threaded 68mm BSA Rear Hub: 142x12mm Rear Axle: M12*1.5 Thread x168mm (Thread Length 17mm) Brake Mount: 160mm Direct Post Protection: Kevlar Chainstay Protector Weight: 1.8kg Specification: Frame: Nukeproof Cub-Scout 20”, custom triple butted hydro-formed 6061 Alloy Threaded 68mm BB 142mm rear axle spacing Kevlar chainstay protector Headset: Nukeproof, 44IETS
Specifically engineered for kid's who want to dive into the world of mountain bike (MTB) riding, this trail-ready frame comes kitted out with a robust aluminium build for an excellent balance of strength, durability and performance. Nukeproof has also put this model through its hydroforming and triple-butting process, which makes it more than capable of handling the demands of learning to ride the trails. Another highlight is its comfortable kid's specific geometry and its internal routing that allows for a dropper seatpost to be used. This makes it a great choice for young riders who want to perfect their skills, wherever their next adventure leads them. Trail-Ready 24" Kid's MTB Frame The Cub-Scout 24” Race is not just another kids bike: taking inspiration from Nukeproof's award-winning Scout adult hardtail range, the Cub-Scout 24” has been designed from the ground-up as a proper mini-hardtail mountain bike. It has been designed to allow kids to learn the ropes of riding, inspire confidence on the trails and act as the perfect platform for progression. Developed and tested with the help of the brand's own children, Nukeproof have created a class-leading lightweight kids bike range to inspire and nurture budding future World Cup or EWS winners! The range of Cub-Scout Hardtail frames are available in 20”, 24” or 26” options; meaning that there should be a Cub-Scout to suit kids of all sizes from aged 5 and up. Each frame features a lightweight custom butted 6061 Alloy frameset with bang up to date long, low and slack kids specific geometry. Features: Material: Hydroformed 6061 Triple-Butted Aluminium Fork Travel: 100mm Axle to Crown: 455mm Fork Offset: 38mm Wheels Size: 24" Max Tyre Size: 2.6" Sizing: One Size Headtube: 44/56mm Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 (For Tapered fork) Seatpost: 27.2mm (Internal Routing for Dropper Seatpost) Seat Clamp: 31.8mm BB: Threaded 68mm BSA Rear Hub: 142x12mm Rear Axle: M12*1.5 Thread x168mm (Thread Length 17mm) Chain Guide: ISCG05 Brake Mount: 160mm Direct Post Protection: Kevlar Chainstay Protector Weight: 2.7kg Specification: Frame: Nukeproof Cub-Scout 24”, custom triple butted hydro-formed 6061 Alloy Internal routing for Dropper Seatpost Threaded 68mm BB 142mm rear axle spacing Kevlar chainstay protector Headset: Nukeproof, 44/56IITS
Nukeproof Cub-Scout 20 Mountain Bike FrameSpecifically designed for kid's who want to progress into the world of mountain bike riding, this mountain bike (MTB) frame is all set for day-long trail riding adventures. Featuring a high-quality 6061 triple-butted aluminium build, this model is more than capable of handling all the knocks and bumps associated with young rider's practising and perfecting their skills. With its comfortable geometry, 20" wheel size and Kevlar chainstay protector, this is a great choice of upgrade for building confidence, wherever their next ride takes them.20" Kid's MTB FrameThe Cub-Scout 20” Race is not just another kids bike: taking inspiration from Nukeproof's award-winning Scout adult hardtail range, the Cub-Scout 20” has been designed from the ground-up as a proper mini-hardtail mountain bike. It has been designed to allow kids to learn the ropes of riding, inspire confidence on the trails and act as the perfect platform for progression. Developed and tested with the help of the brand's own children, Nukeproof have created a class-leading lightweight kids bike range to inspire and nurture budding future World Cup or EWS winners!The range of Cub-Scout Hardtail frames are available in 20”, 24” or 26” options; meaning that there should be a Cub-Scout to suit kids of all sizes from aged 5 and up. Each frame features a lightweight custom butted 6061 alloy frameset with bang up to date long, low and slack kids specific geometry.Features: Material: Nukeproof Cub-Scout 20”, custom triple-butted hydro-formed 6061 Alloy Use: Kid's Mountain Bike (MTB) Frame Fork Travel: 80mm Axle to Crown: 385mm Fork Offset: 38mm Wheels Size: 20" Max Tyre Size: 2.6" Sizing: One Size Headtube: 44mm Semi-Integrated Headset: ZS44-28.6 - T2 / EX44/40 - B5 (For Tapered Steerer fork) Seatpost: 27.2mm Seat Clamp: 31.8mm Bottom Bracket: Threaded 68mm BSA Rear Axle: M12*1.5 Thread x168mm (Thread Length 17mm) Brake Mount: 160mm Direct Post Protection: Kevlar Chainstay Protector Weight: 1.8kgBuy Nukeproof Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Cub-Scout 24 Mountain Bike FrameComing kitted out with a robust aluminium build, this kid's mountain bike (MTB) frame offers an excellent balance of strength, durability and performance. Engineered for kid's who want to dive into the world of MTB riding, Nukeproof has also put this model through its hydroforming and triple-butting process, which makes it more than capable of handling the demands of learning to ride the trails. Another benefit is its comfortable kid's specific geometry and its internal routing that allows for a dropper seatpost to be used. This makes it a great choice for young riders who want to perfect their skills, wherever their next adventure leads them.Trail-Ready 24" Kid's MTB FrameThe Cub-Scout 24” Race is not just another kids bike: taking inspiration from Nukeproof's award-winning Scout adult hardtail range, the Cub-Scout 24” has been designed from the ground-up as a proper mini-hardtail mountain bike. It has been designed to allow kids to learn the ropes of riding, inspire confidence on the trails and act as the perfect platform for progression. Developed and tested with the help of the brand's own children, Nukeproof have created a class-leading lightweight kids bike range to inspire and nurture budding future World Cup or EWS winners!The range of Cub-Scout Hardtail frames are available in 20”, 24” or 26” options; meaning that there should be a Cub-Scout to suit kids of all sizes from aged 5 and up. Each frame features a lightweight custom butted 6061 alloy frameset with bang up to date long, low and slack kids specific geometry.Features: Material: Nukeproof Cub-Scout 24”, custom triple-butted hydro-formed 6061 Alloy Use: Kid's Mountain Bike (MTB) Frame Fork Travel: 100mm Axle to Crown: 455mm Fork Offset: 38mm Wheels Size: 24" Max Tyre Size: 2.6" Sizing: One Size Headtube: 44/56mm Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 (For Tapered fork) Seatpost: 27.2mm (Internal Routing for Dropper Seatpost) Seat Clamp: 31.8mm Bottom Bracket: Threaded 68mm BSA Rear Hub: 142x12mm Rear Axle: M12*1.5 Thread x168mm (Thread Length 17mm) Chain Guide: ISCG05 Brake Mount: 160mm Direct Post Protection: Kevlar Chainstay Protector Weight: 2.7kgBuy Nukeproof Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.
This rear wheel features 36 points of engagement and comes in a range of freehub options. Nukeproof has also made freehubs available separately and easy to change if you choose to upgrade your drivetrain in the future. The 142mm hub can be converted to 135mm QR and the 148mm HG / XD hub can be converted to 141mm using end caps. The hub has been machined to remove excess material and make it as strong and light as possible. Nukeproof have increased the thickness of pawl springs in these hubs to give secure engagement on every pedal stroke. The 6066 alloy rim has been extensively to ensure it is a rim which is light enough for aggressive trail riding but strong enough for DH. Nukeproof have used J-Bend spokes meaning tensioning and spoke replacement is much simpler than using a straight pull spoke. The wheels come taped with tubeless valve installed so all you need to do is add sealant and your tyre to get a finished tubeless setup. The valve supplied is Nukeproof's Horizon valve which also has a core remover built into the cap. This valve is also compatible with tyre inserts like Nukeproof ARD. Spoke lengths on the front wheels are the same regardless of spacing, the length changes with wheel size: Wheel Size Spacing Non Driveside Spoke Length Driveside Spoke Length 27.5" 142mm / 148mm x 12mm 274 272 27.5" 150mm / 157mm x 12mm 274 273 29" 142mm / 148mm x 12mm 292 290 29" 150mm / 157mm x 12mm 292 291 Conversion kits and replacement end caps available separately. Caps Nukeproof Part Number Replacement or Conversion Rear 135mm QR NUKNEUV2R135CAPS Convert Non Boost 142mm hub to QR Rear 141mm NUKNEUV2R141BCAPS Convert Boost 148mm HG / XD hub to 141mm QR (It is not possible to convert Nukeproof's 148mm microspline hubs to QR) Rear 142/148/157mm NUKNEUV2R148CAPS Replacement caps for 142mm, 148mm and 157mm Rear 150mm NUKNEUV2R150CAPS Replacement 150mm caps Full range of spare parts available.
Nukeproof Neutron V2 Rear Wheel 36tThis MTB rear wheel has been completely redesigned from the ground up and gives riders incredibly fast and smooth rolling performance on every ride. It features 36 points of engagement and comes in a range of freehub options. Nukeproof has also made freehubs available separately and easy to change if you choose to upgrade your drivetrain in the future.The 142mm hub can be converted to 135mm QR and the 148mm HG / XD hub can be converted to 141mm using end caps. The hub has been machined to remove excess material and make it as strong and light as possible. Nukeproof have increased the thickness of pawl springs in these hubs to give secure engagement on every pedal stroke.The 6066 alloy rim has been extensively to ensure it is a rim which is light enough for aggressive trail riding but strong enough for DH.Nukeproof have used J-Bend spokes meaning tensioning and spoke replacement is much simpler than using a straight pull spoke.The wheels come taped with tubeless valve installed so all you need to do is add sealant and your tyre to get a finished tubeless setup. The valve supplied is Nukeproof's Horizon valve which also has a core remover built into the cap. This valve is also compatible with tyre inserts like Nukeproof ARD.Full range of spare parts available.Features: Rim Material: 6066 Alloy Use: MTB, Trail, All Mountain, Enduro and DH Wheel Size: 27.5" or 29" options available Spacing Options: 142x12mm, 148x12mm, 150/157x12mm Conversion Options: 142x12mm can be converted to 135mm QR, 148x12mm HG / XD can be converted to 141mm Boost with end caps (sold separately) Rear Hub Engagement: 36 points of engagement (every 10°) Freehub Options: Shimano HG (9-11-Speed), Shimano Microspline (12-Speed) or SRAM XD (11 and 12-Speed) Spoke Type: J-Bend Spoke Count: 32 Lacing Pattern: 3x Disc Mount: 6-bolt Inner Rim Width: 28mm External Rim Width: 32mm Rim Height: 18mm Tubeless Ready: Yes - Pretaped and valve supplied Single or Pair: Single Build: Handbuilt Weight: 15mm Boost Front: 905g including valve & tape; 148mm Boost HG Rear: 1045g including valve and tapeSpoke length’s on the front wheels are the same regardless of spacing, the length changes with wheel size: Wheel Size Spacing Non Driveside Spoke Length Driveside Spoke Length 27.5" 142mm / 148mm x 12mm 274 272 27.5" 150mm / 157mm x 12mm 274 273 29" 142mm / 148mm x 12mm 292 290 29" 150mm / 157mm x 12mm 292 291 Conversion kits and replacement end caps available separately Caps Nukeproof Part Number Replacement or Conversion Rear 135mm QR NUKNEUV2R135CAPS Convert Non Boost 142mm hub to QR Rear 141mm NUKNEUV2R141BCAPS Convert Boost 148mm HG / XD hub to 141mm QR (It is not possible to convert Nukeproof's 148mm microspline hubs to QR) Rear 142/148/157mm NUKNEUV2R148CAPS Replacement caps for 142mm, 148mm and 157mm Rear 150mm NUKNEUV2R150CAPS Replacement 150mm caps Buy Nukeproof Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Neutron V2 Rear Wheel 36tThis MTB rear wheel has been completely redesigned from the ground up and gives riders incredibly fast and smooth rolling performance on every ride. It features 36 points of engagement and comes in a range of freehub options. Nukeproof has also made freehubs available separately and easy to change if you choose to upgrade your drivetrain in the future.The 142mm hub can be converted to 135mm QR and the 148mm HG / XD hub can be converted to 141mm using end caps. The hub has been machined to remove excess material and make it as strong and light as possible. Nukeproof have increased the thickness of pawl springs in these hubs to give secure engagement on every pedal stroke.The 6066 alloy rim has been extensively to ensure it is a rim which is light enough for aggressive trail riding but strong enough for DH.Nukeproof have used J-Bend spokes meaning tensioning and spoke replacement is much simpler than using a straight pull spoke.The wheels come taped with tubeless valve installed so all you need to do is add sealant and your tyre to get a finished tubeless setup. The valve supplied is Nukeproof's Horizon valve which also has a core remover built into the cap. This valve is also compatible with tyre inserts like Nukeproof ARD.Full range of spare parts available.Features: Rim Material: 6066 Alloy Use: MTB, Trail, All Mountain, Enduro and DH Wheel Size: 27.5" or 29" options available Spacing Options: 142x12mm, 148x12mm, 150/157x12mm Conversion Options: 142x12mm can be converted to 135mm QR, 148x12mm HG / XD can be converted to 141mm Boost with end caps (sold separately) Rear Hub Engagement: 36 points of engagement (every 10°) Freehub Options: Shimano HG (9-11-Speed), Shimano Microspline (12-Speed) or SRAM XD (11 and 12-Speed) Spoke Type: J-Bend Spoke Count: 32 Lacing Pattern: 3x Disc Mount: 6-bolt Inner Rim Width: 28mm External Rim Width: 32mm Rim Height: 18mm Tubeless Ready: Yes - Pretaped and valve supplied Single or Pair: Single Build: Handbuilt Weight: 15mm Boost Front: 905g including valve & tape; 148mm Boost HG Rear: 1045g including valve and tapeSpoke length’s on the front wheels are the same regardless of spacing, the length changes with wheel size: Wheel Size Spacing Non Driveside Spoke Length Driveside Spoke Length 27.5" 142mm / 148mm x 12mm 274 272 27.5" 150mm / 157mm x 12mm 274 273 29" 142mm / 148mm x 12mm 292 290 29" 150mm / 157mm x 12mm 292 291 Conversion kits and replacement end caps available separately Caps Nukeproof Part Number Replacement or Conversion Rear 135mm QR NUKNEUV2R135CAPS Convert Non Boost 142mm hub to QR Rear 141mm NUKNEUV2R141BCAPS Convert Boost 148mm HG / XD hub to 141mm QR (It is not possible to convert Nukeproof's 148mm microspline hubs to QR) Rear 142/148/157mm NUKNEUV2R148CAPS Replacement caps for 142mm, 148mm and 157mm Rear 150mm NUKNEUV2R150CAPS Replacement 150mm caps Buy Nukeproof Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Neutron V2 Rear Wheel 36tThis MTB rear wheel has been completely redesigned from the ground up and gives riders incredibly fast and smooth rolling performance on every ride. It features 36 points of engagement and comes in a range of freehub options. Nukeproof has also made freehubs available separately and easy to change if you choose to upgrade your drivetrain in the future.The 142mm hub can be converted to 135mm QR and the 148mm HG / XD hub can be converted to 141mm using end caps. The hub has been machined to remove excess material and make it as strong and light as possible. Nukeproof have increased the thickness of pawl springs in these hubs to give secure engagement on every pedal stroke.The 6066 alloy rim has been extensively to ensure it is a rim which is light enough for aggressive trail riding but strong enough for DH.Nukeproof have used J-Bend spokes meaning tensioning and spoke replacement is much simpler than using a straight pull spoke.The wheels come taped with tubeless valve installed so all you need to do is add sealant and your tyre to get a finished tubeless setup. The valve supplied is Nukeproof's Horizon valve which also has a core remover built into the cap. This valve is also compatible with tyre inserts like Nukeproof ARD.Full range of spare parts available.Features: Rim Material: 6066 Alloy Use: MTB, Trail, All Mountain, Enduro and DH Wheel Size: 27.5" or 29" options available Spacing Options: 142x12mm, 148x12mm, 150/157x12mm Conversion Options: 142x12mm can be converted to 135mm QR, 148x12mm HG / XD can be converted to 141mm Boost with end caps (sold separately) Rear Hub Engagement: 36 points of engagement (every 10°) Freehub Options: Shimano HG (9-11-Speed), Shimano Microspline (12-Speed) or SRAM XD (11 and 12-Speed) Spoke Type: J-Bend Spoke Count: 32 Lacing Pattern: 3x Disc Mount: 6-bolt Inner Rim Width: 28mm External Rim Width: 32mm Rim Height: 18mm Tubeless Ready: Yes - Pretaped and valve supplied Single or Pair: Single Build: Handbuilt Weight: 15mm Boost Front: 905g including valve & tape; 148mm Boost HG Rear: 1045g including valve and tapeSpoke length’s on the front wheels are the same regardless of spacing, the length changes with wheel size: Wheel Size Spacing Non Driveside Spoke Length Driveside Spoke Length 27.5" 142mm / 148mm x 12mm 274 272 27.5" 150mm / 157mm x 12mm 274 273 29" 142mm / 148mm x 12mm 292 290 29" 150mm / 157mm x 12mm 292 291 Conversion kits and replacement end caps available separately Caps Nukeproof Part Number Replacement or Conversion Rear 135mm QR NUKNEUV2R135CAPS Convert Non Boost 142mm hub to QR Rear 141mm NUKNEUV2R141BCAPS Convert Boost 148mm HG / XD hub to 141mm QR (It is not possible to convert Nukeproof's 148mm microspline hubs to QR) Rear 142/148/157mm NUKNEUV2R148CAPS Replacement caps for 142mm, 148mm and 157mm Rear 150mm NUKNEUV2R150CAPS Replacement 150mm caps Buy Nukeproof Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Neutron V2 Rear Wheel 36tThis MTB rear wheel has been completely redesigned from the ground up and gives riders incredibly fast and smooth rolling performance on every ride. It features 36 points of engagement and comes in a range of freehub options. Nukeproof has also made freehubs available separately and easy to change if you choose to upgrade your drivetrain in the future.The 142mm hub can be converted to 135mm QR and the 148mm HG / XD hub can be converted to 141mm using end caps. The hub has been machined to remove excess material and make it as strong and light as possible. Nukeproof have increased the thickness of pawl springs in these hubs to give secure engagement on every pedal stroke.The 6066 alloy rim has been extensively to ensure it is a rim which is light enough for aggressive trail riding but strong enough for DH.Nukeproof have used J-Bend spokes meaning tensioning and spoke replacement is much simpler than using a straight pull spoke.The wheels come taped with tubeless valve installed so all you need to do is add sealant and your tyre to get a finished tubeless setup. The valve supplied is Nukeproof's Horizon valve which also has a core remover built into the cap. This valve is also compatible with tyre inserts like Nukeproof ARD.Full range of spare parts available.Features: Rim Material: 6066 Alloy Use: MTB, Trail, All Mountain, Enduro and DH Wheel Size: 27.5" or 29" options available Spacing Options: 142x12mm, 148x12mm, 150/157x12mm Conversion Options: 142x12mm can be converted to 135mm QR, 148x12mm HG / XD can be converted to 141mm Boost with end caps (sold separately) Rear Hub Engagement: 36 points of engagement (every 10°) Freehub Options: Shimano HG (9-11-Speed), Shimano Microspline (12-Speed) or SRAM XD (11 and 12-Speed) Spoke Type: J-Bend Spoke Count: 32 Lacing Pattern: 3x Disc Mount: 6-bolt Inner Rim Width: 28mm External Rim Width: 32mm Rim Height: 18mm Tubeless Ready: Yes - Pretaped and valve supplied Single or Pair: Single Build: Handbuilt Weight: 15mm Boost Front: 905g including valve & tape; 148mm Boost HG Rear: 1045g including valve and tapeSpoke length’s on the front wheels are the same regardless of spacing, the length changes with wheel size: Wheel Size Spacing Non Driveside Spoke Length Driveside Spoke Length 27.5" 142mm / 148mm x 12mm 274 272 27.5" 150mm / 157mm x 12mm 274 273 29" 142mm / 148mm x 12mm 292 290 29" 150mm / 157mm x 12mm 292 291 Conversion kits and replacement end caps available separately Caps Nukeproof Part Number Replacement or Conversion Rear 135mm QR NUKNEUV2R135CAPS Convert Non Boost 142mm hub to QR Rear 141mm NUKNEUV2R141BCAPS Convert Boost 148mm HG / XD hub to 141mm QR (It is not possible to convert Nukeproof's 148mm microspline hubs to QR) Rear 142/148/157mm NUKNEUV2R148CAPS Replacement caps for 142mm, 148mm and 157mm Rear 150mm NUKNEUV2R150CAPS Replacement 150mm caps Buy Nukeproof Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Neutron V2 Rear Wheel 36tThis MTB rear wheel has been completely redesigned from the ground up and gives riders incredibly fast and smooth rolling performance on every ride. It features 36 points of engagement and comes in a range of freehub options. Nukeproof has also made freehubs available separately and easy to change if you choose to upgrade your drivetrain in the future.The 142mm hub can be converted to 135mm QR and the 148mm HG / XD hub can be converted to 141mm using end caps. The hub has been machined to remove excess material and make it as strong and light as possible. Nukeproof have increased the thickness of pawl springs in these hubs to give secure engagement on every pedal stroke.The 6066 alloy rim has been extensively to ensure it is a rim which is light enough for aggressive trail riding but strong enough for DH.Nukeproof have used J-Bend spokes meaning tensioning and spoke replacement is much simpler than using a straight pull spoke.The wheels come taped with tubeless valve installed so all you need to do is add sealant and your tyre to get a finished tubeless setup. The valve supplied is Nukeproof's Horizon valve which also has a core remover built into the cap. This valve is also compatible with tyre inserts like Nukeproof ARD.Full range of spare parts available.Features: Rim Material: 6066 Alloy Use: MTB, Trail, All Mountain, Enduro and DH Wheel Size: 27.5" or 29" options available Spacing Options: 142x12mm, 148x12mm, 150/157x12mm Conversion Options: 142x12mm can be converted to 135mm QR, 148x12mm HG / XD can be converted to 141mm Boost with end caps (sold separately) Rear Hub Engagement: 36 points of engagement (every 10°) Freehub Options: Shimano HG (9-11-Speed), Shimano Microspline (12-Speed) or SRAM XD (11 and 12-Speed) Spoke Type: J-Bend Spoke Count: 32 Lacing Pattern: 3x Disc Mount: 6-bolt Inner Rim Width: 28mm External Rim Width: 32mm Rim Height: 18mm Tubeless Ready: Yes - Pretaped and valve supplied Single or Pair: Single Build: Handbuilt Weight: 15mm Boost Front: 905g including valve & tape; 148mm Boost HG Rear: 1045g including valve and tapeSpoke length’s on the front wheels are the same regardless of spacing, the length changes with wheel size: Wheel Size Spacing Non Driveside Spoke Length Driveside Spoke Length 27.5" 142mm / 148mm x 12mm 274 272 27.5" 150mm / 157mm x 12mm 274 273 29" 142mm / 148mm x 12mm 292 290 29" 150mm / 157mm x 12mm 292 291 Conversion kits and replacement end caps available separately Caps Nukeproof Part Number Replacement or Conversion Rear 135mm QR NUKNEUV2R135CAPS Convert Non Boost 142mm hub to QR Rear 141mm NUKNEUV2R141BCAPS Convert Boost 148mm HG / XD hub to 141mm QR (It is not possible to convert Nukeproof's 148mm microspline hubs to QR) Rear 142/148/157mm NUKNEUV2R148CAPS Replacement caps for 142mm, 148mm and 157mm Rear 150mm NUKNEUV2R150CAPS Replacement 150mm caps Buy Nukeproof Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Neutron V2 Rear Wheel 36tThis MTB rear wheel has been completely redesigned from the ground up and gives riders incredibly fast and smooth rolling performance on every ride. It features 36 points of engagement and comes in a range of freehub options. Nukeproof has also made freehubs available separately and easy to change if you choose to upgrade your drivetrain in the future.The 142mm hub can be converted to 135mm QR and the 148mm HG / XD hub can be converted to 141mm using end caps. The hub has been machined to remove excess material and make it as strong and light as possible. Nukeproof have increased the thickness of pawl springs in these hubs to give secure engagement on every pedal stroke.The 6066 alloy rim has been extensively to ensure it is a rim which is light enough for aggressive trail riding but strong enough for DH.Nukeproof have used J-Bend spokes meaning tensioning and spoke replacement is much simpler than using a straight pull spoke.The wheels come taped with tubeless valve installed so all you need to do is add sealant and your tyre to get a finished tubeless setup. The valve supplied is Nukeproof's Horizon valve which also has a core remover built into the cap. This valve is also compatible with tyre inserts like Nukeproof ARD.Full range of spare parts available.Features: Rim Material: 6066 Alloy Use: MTB, Trail, All Mountain, Enduro and DH Wheel Size: 27.5" or 29" options available Spacing Options: 142x12mm, 148x12mm, 150/157x12mm Conversion Options: 142x12mm can be converted to 135mm QR, 148x12mm HG / XD can be converted to 141mm Boost with end caps (sold separately) Rear Hub Engagement: 36 points of engagement (every 10°) Freehub Options: Shimano HG (9-11-Speed), Shimano Microspline (12-Speed) or SRAM XD (11 and 12-Speed) Spoke Type: J-Bend Spoke Count: 32 Lacing Pattern: 3x Disc Mount: 6-bolt Inner Rim Width: 28mm External Rim Width: 32mm Rim Height: 18mm Tubeless Ready: Yes - Pretaped and valve supplied Single or Pair: Single Build: Handbuilt Weight: 15mm Boost Front: 905g including valve & tape; 148mm Boost HG Rear: 1045g including valve and tapeSpoke length’s on the front wheels are the same regardless of spacing, the length changes with wheel size: Wheel Size Spacing Non Driveside Spoke Length Driveside Spoke Length 27.5" 142mm / 148mm x 12mm 274 272 27.5" 150mm / 157mm x 12mm 274 273 29" 142mm / 148mm x 12mm 292 290 29" 150mm / 157mm x 12mm 292 291 Conversion kits and replacement end caps available separately Caps Nukeproof Part Number Replacement or Conversion Rear 135mm QR NUKNEUV2R135CAPS Convert Non Boost 142mm hub to QR Rear 141mm NUKNEUV2R141BCAPS Convert Boost 148mm HG / XD hub to 141mm QR (It is not possible to convert Nukeproof's 148mm microspline hubs to QR) Rear 142/148/157mm NUKNEUV2R148CAPS Replacement caps for 142mm, 148mm and 157mm Rear 150mm NUKNEUV2R150CAPS Replacement 150mm caps Buy Nukeproof Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Nukeproof Horizon V2 Front WheelThis MTB front wheel features a revised design, which gives you fast and smooth-rolling performance as you shred the trails. Coming equipped with Nukeproof's extensively trailed and tested alloy blend, its rim construction is specifically made to meet the demands of both enduro and DH riders. Producing a hardness similar to 7-series alloy but with the ductility and yield properties of a 6-series, this front wheel gives you the best of both worlds in terms of strength, stiffness and weight.Nukeproof has ensured this front wheel's rim profile is the same as the rear (sold separately), with the only difference being that the front has a thinner sidewall for greater weight savings. Another benefit is it comes equipped with J-bend spokes, which means that tensioning and spoke replacement is quick and easy.Enduro ABEC 5 BearingsAfter extensive testing with various brands of bearings, Nukeproof chose to use Enduro ABEC 5 bearings in this front wheel. These bearings have the “LLU/LLB” seal type, which uses two lips that make light contact in a groove to create a labyrinth where the water or dirt has a more difficult time to penetrate. LLU seals are similar, only the contact pressure or interference fit is greater to seal better. Enduro bearings have 80% grease fill on both sides whereas most other bearings have 35% grease fill on one side. This delivers full coverage, so there are no dry areas as well as avoiding metal on metal contact or wear. This means that the axle feels tight out of the box and after a couple of rides it will become free.Nukeproof Horizon V2 HubThis MTB front wheel features a revised Nukeproof Horizon V2 hub, which is available for both 15mm & 20mm spacings in both boost & non boost. We also sell end caps for QR separately. What's Included?Wheels come taped with tubeless valve installed so all you need to do is fit your tyre and add sealant. The tubeless valve supplied is the revised Nukeproof Horizon valve, which is compatible with Nukeproof ARD and other tyre inserts, as well as the cap having a core remover built in. Spoke lengths on Nukeproof wheels are the same regardless of spacing, the length changes with wheel size: Wheel Wheel Size Non Drive Side Spoke Length Driveside Spoke Length Front 27.5" 269 270 Front 29" 288 289 Conversion kits and replacement end caps available separately. Cap Nukeproof Part Number Usage Front 9mm QR NUKHORV2F9QRCAPS Convert 15mm non boost hub to QR Not compatible with the 20mm non boost hub shell Front 15mm Caps NUKHORV2F15CAPS Replacement 15mm end caps Not compatible with the 20mm hub shell Front 20mm Caps NUKHORV2F20CAPS Replacement 20mm end caps Not compatible with the 15mm hub shell Front 15mm Rockshox Torque caps NUKHORV2ENDB15T Convert 15mm boost hub for Rockshox Torque dropouts Front 20mm to 15mm boost conversion NUKHORV2END2015B Convert 20mm boost hub to 15mm boost Front 20mm to 15mm non boost conversion NUKHORV2END2015NB Convert 20mm non boost hub to 15mm non boost Features: Rim Material: Alloy Nukeproof Blend Use: MTB, All Mountain, Enduro and DH Spacing Options: 15x100mm; 15x110mm; 20x110mm Non Boost and 20x110mm Boost Wheel Size: 27.5" or 29" options Inner Rim Width: 30mm Outer Rim Width: 35mm Rim Height: 21.6mm Tubeless Ready: Yes, pre-taped and valve supplied Spoke Count: 32 Spoke Type: J-Bend Disc Mount: 6-Bolt Lacing Pattern: 3x Build: Hand built Single or Pair: Single Weight: 27.5” 15mm Boost: 884g; 27.5” 20mm Boost: 946g; 29” 15mm Boost: 897g (All weights include tape & valve)Buy Nukeproof Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Nukeproof Horizon V2 Front Wheel has been completely redesigned from the ground up and delivers fast and smooth-rolling performance across every inch of the mountain.Rim Material: Alloy Nukeproof BlendUse: MTB, All Mountain, Enduro and DHSpacing Options: 15x100mm; 15x110mm; 20x110mm Non Boost and 20x110mm BoostWheel Size: 27.5" or 29" optionsInner Rim Width: 30mmOuter Rim Width: 35mmRim Height: 21.6mmTubeless Ready: Yes, pre-taped and valve suppliedSpoke Count: 32Spoke Type: J-BendDisc Mount: 6-BoltLacing Pattern: 3xBuild: Hand builtSingle or Pair: SingleWeight: 27.5 15mm Boost: 884g; 27.5 20mm Boost: 946g; 29 15mm Boost: 897g (All weights include tape & valve)This MTB front wheel features a revised design, which gives you fast and smooth-rolling performance as you shred the trails. Coming equipped with Nukeproof's extensively trailed and tested alloy blend, its rim construction is specifically made to meet the demands of both enduro and DH riders. Producing a hardness similar to 7-series alloy but with the ductility and yield properties of a 6-series, this front wheel gives you the best of both worlds in terms of strength, stiffness and weight.Nukeproof has ensured this front wheel's rim profile is the same as the rear (sold separately), with the only difference being that the front has a thinner sidewall for greater weight savings. Another benefit is it comes equipped with J-bend spokes, which means that tensioning and spoke replacement is quick and easy.Enduro ABEC 5 Bearings - After extensive testing with various brands of bearings, Nukeproof chose to use Enduro ABEC 5 bearings in this front wheel. These bearings have the LLU/LLB seal type, which uses two lips that make light contact in a groove to create a labyrinth where the water or dirt has a more difficult time to penetrate. LLU seals are similar, only the contact pressure or interference fit is greater to seal better. Enduro bearings have 80% grease fill on both sides whereas most other bearings have 35% grease fill on one side. This delivers full coverage, so there are no dry areas as well as avoiding metal on metal contact or wear. This means that the axle feels tight out of the box and after a couple of rides it will become free.Nukeproof Horizon V2 Hub - This MTB front wheel features a revised Nukeproof Horizon V2 hub, which is available for both 15mm & 20mm spacings in both boost & non boost. We also sell end caps for QR separately.What's Included - Wheels come taped with tubeless valve installed so all you need to do is fit your tyre and add sealant. The tubeless valve supplied is the revised Nukeproof Horizon valve, which is compatible with Nukeproof ARD and other tyre inserts, as well as the cap having a core remover built in. Conversion kits and replacement end caps available separately.
Completely redesigned from the ground up, the Nukeproof Horizon V2 Front Wheel delivers fast and smooth-rolling performance across every inch of the mountain.Ready for fast-paced and aggressive trail-riding, this front wheel has gone through extensive testing to meet the demands of both Enduro and DH riders.It features a special blend of alloy material, which produces a hardness similar to 7-series alloy, but with the ductility and yield properties of a 6-series. This gives you the best of both worlds in terms of stiffness, strength and weight.Nukeproof has also ensured this front wheel's rim profile is the same as the rear (sold separately), the only difference is the front has a thinner sidewall for greater weight savings. One final highlight is it comes equipped with J-bend spokes, which means that tensioning and spoke replacement is as simple as possible. Enduro ABEC 5 BearingsAfter extensive testing with various brands of bearings, Nukeproof chose to use Enduro ABEC 5 bearings in this front wheel. These bearings have the “LLU/LLB” seal type, which uses two lips that make light contact in a groove to create a labyrinth where the water or dirt has a more difficult time to penetrate.LLU seals are similar, only the contact pressure or interference fit is greater to seal better. Enduro bearings have 80% grease fill on both sides whereas most other bearings have 35% grease fill on one side.This delivers full coverage, so there are no dry areas as well as avoiding metal on metal contact or wear. This means that the axle feels tight out of the box and after a couple of rides it will become free. Nukeproof Horizon V2 HubThis MTB front wheel features a revised Nukeproof Horizon V2 hub, which is available for both 15mm & 20mm spacings in both boost & non boost. We also sell end caps for QR separately. What's Included?Wheels come taped with tubeless valve installed so all you need to do is fit your tyre and add sealant. The tubeless valve supplied is the new Nukeproof Horizon valve which is compatible with Nukeproof ARD and other tyre inserts as well as the cap having a core remover built-in.Spoke length’s on Nukeproof wheels are the same regardless of spacing, the length changes with wheel size:27.5" Front Wheel: Non-Drive Side: 269, Driveside: 27029" Front Wheel: Non-Drive Side: 288, Driveside: 289 Conversion kits and replacement end caps available separately Key Features: Rim Material: Alloy Nukeproof Blend,Use: Trail, All Mountain, Enduro and DH,Spacing Options: 15x100mm; 15x110mm; 20x110mm Non Boost and 20x110mm Boost,Rim Width: Inner Width: 30mm; External Width: 35mm,Rim Height: 21.6mm,Tubeless Ready: Yes - Pretaped and valve supplied,Spoke Count: 32; Spoke Type: J-Bend; Lacing Pattern: 3x,Disc Mount: 6-Bolt,Build: Handbuilt,Weight: 27.5" 15mm Boost: 884g; 27.5" 20mm Boost: 946g.
Completely redesigned from the ground up, the Nukeproof Horizon V2 Front Wheel delivers fast and smooth-rolling performance across every inch of the mountain.Ready for fast-paced and aggressive trail-riding, this front wheel has gone through extensive testing to meet the demands of both Enduro and DH riders.It features a special blend of alloy material, which produces a hardness similar to 7-series alloy, but with the ductility and yield properties of a 6-series. This gives you the best of both worlds in terms of stiffness, strength and weight.Nukeproof has also ensured this front wheel's rim profile is the same as the rear (sold separately), the only difference is the front has a thinner sidewall for greater weight savings. One final highlight is it comes equipped with J-bend spokes, which means that tensioning and spoke replacement is as simple as possible. Enduro ABEC 5 BearingsAfter extensive testing with various brands of bearings, Nukeproof chose to use Enduro ABEC 5 bearings in this front wheel. These bearings have the “LLU/LLB” seal type, which uses two lips that make light contact in a groove to create a labyrinth where the water or dirt has a more difficult time to penetrate.LLU seals are similar, only the contact pressure or interference fit is greater to seal better. Enduro bearings have 80% grease fill on both sides whereas most other bearings have 35% grease fill on one side.This delivers full coverage, so there are no dry areas as well as avoiding metal on metal contact or wear. This means that the axle feels tight out of the box and after a couple of rides it will become free. Nukeproof Horizon V2 HubThis MTB front wheel features a revised Nukeproof Horizon V2 hub, which is available for both 15mm & 20mm spacings in both boost & non boost. We also sell end caps for QR separately. What's Included?Wheels come taped with tubeless valve installed so all you need to do is fit your tyre and add sealant. The tubeless valve supplied is the new Nukeproof Horizon valve which is compatible with Nukeproof ARD and other tyre inserts as well as the cap having a core remover built-in.Spoke length’s on Nukeproof wheels are the same regardless of spacing, the length changes with wheel size:27.5" Front Wheel: Non-Drive Side: 269, Driveside: 27029" Front Wheel: Non-Drive Side: 288, Driveside: 289 Conversion kits and replacement end caps available separately Key Features: Rim Material: Alloy Nukeproof Blend,Use: Trail, All Mountain, Enduro and DH,Spacing Options: 15x100mm; 15x110mm; 20x110mm Non Boost and 20x110mm Boost,Rim Width: Inner Width: 30mm; External Width: 35mm,Rim Height: 21.6mm,Tubeless Ready: Yes - Pretaped and valve supplied,Spoke Count: 32; Spoke Type: J-Bend; Lacing Pattern: 3x,Disc Mount: 6-Bolt,Build: Handbuilt,Weight: 27.5" 15mm Boost: 884g; 27.5" 20mm Boost: 946g.
Nukeproof Cub-Scout 26 Mountain Bike FrameSpecifically developed for kid's, this mountain bike (MTB) frame boasts a tough aluminium construction for a fantastic balance of strength, durability and performance. Offering extra toughness on the most demanding of terrain conditions, Nukeproof has also put this model through a hydroforming and triple-butting process for additional resilience as your young rider perfects their skills. Another highlight is its comfortable kid's specific geometry and its internal routing that allows it to be used with a dropper seatpost. Coming complete with a Kevlar chainstay protector, 142x12mm rear hub spacing and a sleek design, this is a perfect upgrade for building confidence on the trails.26" Kid's MTB FrameThe Cub-Scout 26” Race is not just another kids bike: taking inspiration from Nukeproof's award-winning Scout adult hardtail range, the Cub-Scout 26” has been designed from the ground-up as a proper mini-hardtail mountain bike. It has been designed to allow kids to learn the ropes of riding, inspire confidence on the trails and act as the perfect platform for progression. Developed and tested with the help of the brand's own children, Nukeproof have created a class leading lightweight kids bike range to inspire and nurture budding future World Cup or EWS winners!The range of Cub-Scout Hardtail frames are available in 20”, 24” or 26” options; meaning that there should be a Cub-Scout to suit kids of all sizes from aged 5 and up. Each frame features a lightweight custom butted 6061 alloy frameset with bang up to date long, low and slack kids specific geometry.Features: Material: Nukeproof Cub-Scout 26”, custom triple-butted hydro-formed 6061 Alloy Use: Kid's Mountain Bike (MTB) Frame Fork Travel: 120mm Axle to Crown: 514mm Fork Offset: 46mm Wheels Size: 26" Max Tyre Size: 2.6" Sizing: One Size Headtube: 44mm Semi-Integrated Headset: ZS44-28.6 - T2 / ZS56/40 - B8 (For Tapered fork) Seatpost: 27.2mm (Internal routing for dropper seatpost) Seat Clamp: 31.8mm Bottom Bracket: Threaded 68mm BSA Rear Hub: 142x12mm Rear Axle: M12*1.5 Thread x168mm (Thread Length 17mm) Chain Guide: ISCG05 Brake Mount: 160mm Direct Post Protection: Kevlar Chainstay Protector Weight: 2.8kgBuy Nukeproof Frames & Forks from Chain Reaction Cycles, the World's Largest Online Bike Store.