LifeLine Speed & Cadence - Bluetooth 4.0 & ANT+Keep track of your speed and RPM (revolutions per minute) with the LifeLine Speed and Cadence Sensors which are both Bluetooth 4.0 and ANT+ compatible.The sensors are easy to install on to your bike’s frame. Simply mount the speed sensor to the centre of the rear wheel hub and the cadence sensor to the inside of the crank arm. You can then wirelessly connect the sensors to devices such as your GPS computer or smartphone computer which allows you to accurately record your speed and cadence data. Installation instructions are included.FeaturesIPX7 water resistant (waterproof up to 5ft)Operating range: 2-60mph/ 18-220 RPMCR2032 batteries fitted (1 in each)Size: 28mm diameterWeight: Each sensor weighs approximately 10g (inclusive of mount and elastic band)Battery Life: approximately 12 months based on 1 hour everyday useBuy LifeLine Cycle GPS from Chain Reaction Cycles, the World's Largest Online Bike Store.
◌LifeLine Adventure Seat Pack - Day PackThe Adventure Seat Pack - Day Pack from LifeLine is larger than the standard LifeLine saddle bag but smaller than the Adventure Seat Pack. This makes it ideal for long-distance day trips and off-road adventures when you want to keep your storage on the bike and not in your backpack. It is waterproof and durable and is the perfect cargo solution for your rolled-up jacket, snacks and spare bike parts.Made from 300D Polyester Ripstop with TPU coating, the bag is hard-wearing and 100% waterproof. The bag attaches securely to your seat post and saddle rails - seat post via the wide Velcro strap and saddle rails through the buckles on either side of the bag.The lashings on the top face of the bag allow for additional external attachments. It also features a roll-top closure that is simple and effective, allowing you to shrink the bag down when you're not utilising the full capacity.Features: Material: 300D Polyester Ripstop with TPU Coating Welded Construction Smaller brother to the Adventure Seat Pack Perfect for day tripping Waterproof and full taped seams Reflective logo and lashings for lights and additional out of the bag attachments Capacity: 5L Dimensions: 46cm x 16cm x 11cm Weight: 230gBuy LifeLine Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
We like to ride our bikes and we like to explore. We believe you don't need to pay over the odds for the privilege and so we created the Lifeline Adventure Series of bags- maximising quality and design at a sensible price. The bags are made from a Lightweight 300D Polyester Ripstop with TPU coating and feature a fully welded construction. The Adventure Handlebar Bag has two straps that mount to the handlebar that hold it securely in place whether your riding on the tarmac or on the trail. The bag unrolls from both ends providing easy access off the bike. Boasting an 11-litre volume and maximum 74cm width the bag provides extra storage for extended trips. Webbing on the top and down the front of the bag provides an ideal mount point for lights or other bits that join the adventure. We packed ours with camping food and a lightweight stove.
LifeLine Brake Hose KitThis brake hose kit is a replacement kit for road and mountain bike (MTB) hydraulic disc brakes. Choose the kit you require depending on the brake that you have. All hoses are constructed from a high tenacity braided yarn.There are several options to choose from the menu for this brake hose kit. Please see the below details for more information on each kit:Spec 1- Shimano Straight- Straight Kit- road bikes and entry level MTB with Shimano brakes. 3M x Black Hose- ID=2.1mm/ OD= 5mm 2 x M9 Flange Nuts (for road lever) 2 x M8x0.75 Stainless Nuts (MTB lever end or Road caliper end) 2 x M8x0.75 Forged Nuts 4 x Stainless Inserts 4 x Copper OliveSpec 2- Shimano Straight- 90 Degree Kit- regular MTB bikes with Shimano brakes. 1.8M x Black Hose with banjo pre-assembled- ID=2.1mm/ OD= 5mm 1M x Black Hose with banjo pre-assembled- ID=2.1mm/ OD= 5mm 2 x M8x0.75 Stainless Nuts (MTB lever end) 2 x Stainless Inserts 2 x Copper OliveSpec 3- Avid/SRAM Straight- 90 Degree Kit- Fitment for SRAM Guide Ultimate fitment and Level (remove banjos) 1.8M x Black Hose with banjo pre-assembled- ID=2.1mm/ OD= 5mm 1M x Black Hose with banjo pre-assembled- ID=2.1mm/ OD= 5mm 2 x M8x0.75 Stainless Nuts (MTB lever end) 4 x Stainless Inserts 4 x Alloy Threaded OlivesSpec 4- Avid/SRAM Straight- Straight Kit- Fitment for SRAM Guide R, RS, RSC 1.8M x Black Hose with M6 male adapter pre-assembled- ID=2.1mm/ OD= 5mm 1M x Black Hose with male adapter pre-assembled- ID=2.1mm/ OD= 5mm 2 x M8x0.75 Stainless Nuts (MTB lever end) 4 x Stainless Inserts 4 x Alloy Threaded OlivesSpec 5- Avid/SRAM Straight- 90 Deg Kit MONOBLOCK- Fitment for SRAM Code, Red & Force 1.8M x Black Hose with monoblock banjo pre-assembled- ID=2.1mm/ OD= 5mm 1M x Black Hose with monoblock banjo pre-assembled- ID=2.1mm/ OD= 5mm 2 x M8x0.75 Stainless Nuts (MTB lever end) 2 x Stainless Inserts 2 x Alloy Threaded OlivesSpec 6- Tektro Straight- Straight Kit 1.8M x Black Hose with banjo pre-assembled- ID=2.5mm/ OD= 5.5mm 1M x Black Hose with banjo pre-assembled- ID=2.5mm/ OD= 5.5mm 2 x M8x0.75 Forged Nuts 2 x Copper Inserts 2 x Copper OlivesFeatures: Type: Replacement Brake Hose Kit for hydraulic brakes All hoses are constructed from a high tenacity braided yarnBuy LifeLine Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
LifeLine Pro BB Tool 16 Notch 49mm ODThe 16-notch Pro BB Tool from Lifeline has been precision CNC machined for accurate and efficient removal of 16 notch 49mm outer diameter (OD) external bottom bracket cups. Features: For use with 24mm or 1/2" socket fitting Fits Nukeproof 30mm, Wheels Mfg Thread Together, FSA MegaEvo & any other 16 notch 49mm OD cupBuy LifeLine Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Indoor training is a great way to maintain strength and stamina during the off-season, or a convenient way to supplement your regular training as you increase your distances and lower your times. The LifeLine TT-01 cycle trainer fits 26” mtb wheels, through to 700c road wheels and is supplied with a riser block to keep your front wheel level for a natural riding stance. The resistance dial mounts to your handlebar for instant control of your workout intensity, combine it with your bikes gears to simulate him climbs and sprints. The skewer mount fits both 130mm road bike rear spacing and 135mm mountain bike (MTB) spacing for use with a wide variety of bikes. The trainer is not compatible with bikes that use 12mm thru-axles. The folding a-frame design is ideal for storage and transport, so you can pack it away after use or take it with you to warm up before your event. The Lifeline TT-01 is now in the Zwift classic trainer hardware list. The Zwift team have configured the power curve to Zwift software and so with the addition of a speed and cadence sensor and ANT+ stick (sold separately) you can now ride the trainer on Zwift with improved accuracy. Click here to view the Lifeline Magnetic Turbo Trainer Instructions (.pdf) Additional options have recently been added to the Lifeline TT-01 page- the Klarfit Trainer in Grey and Black. This trainer comes with the same resistance unit as the TT-01 and has the same frame. The only difference is the axle mounting mechanism is slightly different. Please refer to image 6. Please Note: This is not a smart turbo trainer, to connect to training programs such as Zwift, Bluetooth/ANT+ speed and cadence sensors much be purchased separately
The wrenches have a toughened open end and a ratcheting ring at the opposite end. Made from chrome vanadium and with a nickel chrome coating, the wrenches are made to last.
The Lifeline Alloy Pannier Rack is a universal solution for both calliper and disc brake bikes. It can be fitted to accommodate narrowly spaced chainstays on road/ hybrid framesets or wider spaced chainstays on mountain bike framesets compatible with wheel sizes from 26" to 700c Note that rack mounting eyelets are required for installation of this product, please ensure they are present on the frame prior to installation.
LifeLine CRV Ratchet WrenchesWell-crafted and highly durable, this eight-piece ratchet wrench set is ideal for any home bike mechanic or workshop professional. Ranging from 8mm to 15mm in size, each wrench has its own slot in the handy carry pouch for immediate identification, so you can work on a variety of jobs with efficiency and speed. Featuring an open wrench head at one end and a ratcheting ring at the other, all of the chrome-vanadium tools are covered in a nickel-chrome coating for a long-lasting finish. Features: Sizes: 8mm-15mm Material: Chrome-vanadium with nickel-chrome coating Storage: Roll-up pouch Buy LifeLine Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
The inner ring nut removal tool allows you to service your ratchet-style hubs like the DT Swiss 240s, 350 and Prime SR1 hubs. Usually, ratchet hub tools require you to put the tool into a vice and then spin the wheel to loosen but not everyone has a vice, so LifeLine has also added a 24mm Hex which allows you to use a 24mm socket to remove. Not compatible with DT Swiss EXP Ratchet hubs or Pawl drive hubs.
Removing the crown race is an essential step when changing forks and headsets. Without the proper equipment, removing a crown race from a fork steerer can be a difficult and even damaging process. The LifeLine crown race remover features four sharp blades to reach behind the crown race and provide evenly distributed clamping force when the jaws are tightened. On the reverse, there are four recesses to securely place a screwdriver for alternate striking, allowing you to work the crown race free in a gentle and precise manner, and leaving the crown race and steerer intact. Essential for workshops and home mechanics working on fork/headset upgrades and bike refurbishments.
LifeLine Adventure Handlebar BagThe Adventure Handlebar Bag from LifeLine is made from a Lightweight 300D Polyester Ripstop with TPU coating and features a fully welded construction. It provides you with extra space for stashing overnight essentials that conveniently packs between the drops of your handlebars.The Adventure Handlebar Bag has two straps that mount to the handlebar that hold it securely in place whether your riding on the tarmac or on the trail.11-litre Volume for Convenient StorageThe bag unrolls from both ends providing easy access off the bike. Boasting an 11-litre volume and maximum 74cm width the bag provides extra storage for extended trips. Webbing on the top and down the front of the bag provides an ideal mount point for lights or other bits that join the adventure. Features: Material: 300D Polyester Ripstop with TPU Coating Welded Construction Volume: 11L Size: 74 x 31cm Weight: 520gBuy LifeLine Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
LifeLine X-Tools Pro Crown Race Remover ToolThis tool enables the removal of your forks headset crown race from your fork safely and conveniently. The LifeLine Crown Race Remover provides a secure, even grip and an accurate striking surface for easy, damage-free crown race removal. Essential for fork and headset upgrades. Steerer Tube Compatibility: 1", 1-1/8", 1-1/4" and 1-1/2"Instructions: Position the headset crown race remover around the head cup bottom. Drive the nuts of both sides of the remover evenly to ensure balance.*Note: Apply equal pressure by pushing the nuts with the same number of threads.Buy LifeLine Crown Race Remover Tool from Chain Reaction Cycles, the World's Largest Online Bike Store.
The LifeLine quick release skewer set offers a weight saving advantage and adds a premium aesthetic to your wheelset. The elliptical cam provides secure, durable wheel retention with a smooth action and the knurled drive-side bolt provides ample traction for quick entry and exit in cold or wet conditions. Available in anodized black and silver finishes, LifeLine quick release skewers are the ideal upgrade for discerning riders.
LifeLine Tubeless Tyre SealantThe LifeLine Tubeless Tyre Sealant is a top of the range tubeless application that can effectively seal holes and gashes in the tyre up to 5mm. This unique sealant features a blend of a DuPont Kevlar additive for additional sealing effectiveness and reliability. This fast-acting sealant is non-toxic, will not freeze or boil (tested to -17°C and +45°C) and is fully compatible with alloy, steel and composite wheel/rim constructions. No Mess, No Hassle SystemBoth the 80ml and 150ml bottles feature an applicator, which is a no mess, no hassle nozzle system that is perfect for Presta Valves and has a built-in valve removal tool. The bottles also have a clear measuring window, enabling you to gauge the precise quantity of tubeless sealant you require when setting up your tubeless system. As a bonus, the Eco-friendly bottle is refillable.Features: Applicator bottle is reusable and includes built-in Presta Valve removal tool (80ml and 150ml bottle) Clear measuring window Mess free application Seals punctures up to 5mm DuPont Kevlar additive Non-toxic and non-staining Extended one-year shelf-life Application instructions on sealant bottle Recommended Amount: 1"/25mm to 1.5"/38mm width: 60-80ml; 2" to 4" width: 100-150mlBuy LifeLine Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Adventure Handlebar Bag from LifeLine is made from a Lightweight 300D Polyester Ripstop with TPU coating and features a fully welded construction. It provides you with extra space for stashing overnight essentials that conveniently packs between the drops of your handlebars.Material: 300D Polyester Ripstop with TPU Coating Welded ConstructionVolume: 11LSize: 74 x 31cmWeight: 520gThe Adventure Handlebar Bag has two straps that mount to the handlebar and a third to attach to your head tube. The bag unrolls from both ends providing easy access off the bike. Boasting an 11-litre volume and maximum 74cm width the bag provides extra storage for extended trips. Webbing on the top and down the front of the bag provides an ideal mount point for lights or other bits that join the adventure.
You simply clamp the hydraulic hose in place and then drive the barb into place with this Pro Hydraulic Hose Needle Driver.
LifeLine Essential Armour Commuter Road TyreLifeLine Essential Armour Commuter Tyres combine the highest level of puncture protection with excellent speed and handling characteristics to excel on your daily urban commute. The tyre also boasts a reflective strip on the side wall for improved night time visibility. Effective Puncture Protection A 5mm high-elasticity compound rubber breaker sits beneath the tread to shield the inner tube from sharp objects such as glass shards, thorns and other road debris. In the event that the tread is pierced, the breaker distributes the pressure to help prevent the inner tube from being punctured. The tread pattern features deep channels to shift surface water away from the center of the tyre for increased grip in wet conditions. The raised, textured shoulders add further grip in tight corners for a stable and confident feel as you dodge the potholes and sprint for the lights before they change. The aramid folding beads provide a secure interface with the rim whilst also allowing easy installation. Size Matters The 32mm and 35mm options offer a smooth cushioned feel, increased contact with the road and added grip. They will fit on the vast majority of hybrid and cyclocross / gravel bikes. Both options will also fit on 29er mountain bike wheels so you can take you off-road rig up to speed on the tarmac.Features:Reflective strip around the casing for added visibilitySmooth rolling center tread with shoulder ramps for cornering stabilityGrooved arrowhead tread channels water away from the center for wet weather tractionReflective strip on the tyre side wall helping to improve night time visibility32mm and 35mm width options for a smooth cushioned feel, increased contact with the road5mm high-elasticity rubber breaker for outstanding puncture protectionLightweight 120 TPI CasingWeight: 595gPSI: 50-85Sizes: 700 x 32c/35cBuy LifeLine tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
LifeLine Essential Armour Commuter Tyres combine the highest level of puncture protection with excellent speed and handling characteristics to excel on your daily urban commute. The tyre also boasts a reflective strip on the side wall for improved night time visibility. Effective Puncture Protection A 5mm high-elasticity compound rubber breaker sits beneath the tread to shield the inner tube from sharp objects such as glass shards, thorns and other road debris. In the event that the tread is pierced, the breaker distributes the pressure to help prevent the inner tube from being punctured. The tread pattern features deep channels to shift surface water away from the center of the tyre for increased grip in wet conditions. The raised, textured shoulders add further grip in tight corners for a stable and confident feel as you dodge the potholes and sprint for the lights before they change. The aramid folding beads provide a secure interface with the rim whilst also allowing easy installation. Size Matters The 32mm and 35mm options offer a smooth cushioned feel, increased contact with the road and added grip. They will fit on the vast majority of hybrid and cyclocross / gravel bikes. Both options will also fit on 29er mountain bike wheels so you can take you off-road rig up to speed on the tarmac.
LifeLine Internal Cable Routing ToolThis cable routing tool removes the pain of feeding internal cables through frames. Boasting a series of magnets, adapters and a guide cable, this handy tool allows you to feed inner cables, Di2 wiring and hydraulic hose through your frame effortlessly.Simple Internal Cable RoutingTo use, feed the guide cable through your frame using the magnet on your multi-tool and the magnet on the guide cable to pass from the exit to insert point. Next, attach the correct adaptor from the multi-tool to your cable which requires routing. Attach the magnet adaptor to this cable and connect the guide cable to the routing cable. Finally, simply drag the routing cable back through the frame by pulling on the guide cable.Features: Main magnet 1.3m guide cable Hydraulic hose adaptor Brake hose adaptor Di2 E-Tube adaptorBuy LifeLine Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.