Performance Elite Transfer Posts retain the same internals, diameter options, drop options, shortened stack heights, new patent-pending head design and proven internals as the Factory Series but have a black anodized upper. Sizes: Diameter Sizes - 30.9/31.6mm Metric Sizes - 100mm/125mm/150mm/175mm Routing - Internal Only Lower Coating - Powdercoat Black Upper Coating - Black Anodized Specs and Family Features: Patent-pending clamp design dramatically reduces stack height Proven Transfer internals with even easier serviceability than 2020 model 25g lighter than 2020 Transfer NEW lightweight under-bar 1x lever design – or existing 2x lever - Purchased separately Updated design Reduced overall length and insertion depth: 175mm, 30.6mm shorter than 2020 Transfer, 8.6mm insertion depth reduction 150mm, 38.7mm shorter than 2020 Transfer, 15.5mm insertion depth reduction 125mm, 43.5mm shorter than 2020 Transfer, 20.3mm insertion depth reduction 100mm, 48.4mm shorter than 2020 Transfer, 25.2mm insertion depth reduction
Performance Elite Transfer Posts retain the same internals, diameter options, drop options, shortened stack heights, new patent-pending head design and proven internals as the Factory Series but have a black anodized upper. Sizes: Diameter Sizes - 30.9/31.6mm Metric Sizes - 100mm/125mm/150mm/175mm Routing - Internal Only Lower Coating - Powdercoat Black Upper Coating - Black Anodized Specs and Family Features: Patent-pending clamp design dramatically reduces stack height Proven Transfer internals with even easier serviceability than 2020 model 25g lighter than 2020 Transfer NEW lightweight under-bar 1x lever design – or existing 2x lever - Purchased separately Updated design Reduced overall length and insertion depth: 175mm, 30.6mm shorter than 2020 Transfer, 8.6mm insertion depth reduction 150mm, 38.7mm shorter than 2020 Transfer, 15.5mm insertion depth reduction 125mm, 43.5mm shorter than 2020 Transfer, 20.3mm insertion depth reduction 100mm, 48.4mm shorter than 2020 Transfer, 25.2mm insertion depth reduction
Fox Suspension Transfer Perf Elite Dropper SeatpostEngineered for maximum trail performance, this dropper seatpost offers smoother and more dependable operation as you take on every off-road challenge. It features a rock-solid aluminium construction with an anodised finish, making it more than capable of handling the toughest of rides in all-weather conditions. Fox Suspension has also equipped this model with a patented saddle clamp design that reduces its overall weight. Features:Material: AluminiumFinish: AnodisedUse: MTB, Cross CountrySetback: 0mmSeries: Performance EliteActuation: Mechanical handlebar remote (not included)Cable Routing: InternalClamp: 2-boltBuy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
This mountain bike rear shock features a Float DPS damper, which helps you perfect turns without cutting corners. Its DPS dual-piston system also combines exceptional bump compliance with smooth efficiency, so you can conserve your energy when you need it most. Coming complete with three positions of adjustment, this is a superb upgrade for a more rider-tuned feel. Technologies: DPS Damper: DPS damper with three positions - Open, Medium, Firm modes Dual Piston: Dual Piston valve design improves both rebound and compression flow EVOL LV Air Sleeve: Lightweight, one-piece EVOL air sleeve improves responsiveness and sensitivity
Fox Suspension Float DPS Factory Series Rear ShockEngineered for superb off-road performance, the Float DPS Factory Series Rear Shock from Fox Suspension offers excellent shock absorption and control on the toughest rides.This rear MTB shock features a Float DPS damper, which helps you perfect turns without cutting corners. Its DPS dual-piston system also combines exceptional bump compliance with smooth efficiency, so you can conserve your energy for when you need it most. Coming complete with three positions of adjustment, this is a superb upgrade for a more rider-tuned feel. Features: Finish: Genuine Kashima Coat Use: MTB Damper: DPS with three adjustment positions: Open/Medium/Firm modes Air Sleeve: One-piece EVOL LV air sleeve Piston Valve: Dual Piston valve Volume: Multiple options available Shock Actuation: Remote Mount: Trunnion Shock Size/Travel: 185x50mmTechnologies: DPS Damper: DPS damper with three positions - Open, Medium, Firm modes Dual Piston: Dual Piston valve design improves both rebound and compression flow EVOL LV Air Sleeve: Lightweight, one-piece EVOL air sleeve improves responsiveness and sensitivityBuy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Part of the Performance Elite series, this high-quality dropper seatpost is equipped with a black anodised upper coating that provides an additional level of protection against wear and corrosion wherever your adventure takes you. Fox Suspension has also kitted it out with a powdercoat lower coating that allows it to handle all of challenges associated with all-day epics on your favourite trails and day-long adventures on your gravel bike. Also benefitting from internal cable routing, this versatile model provides a sleek look on your ride while also minimising any risk of damage from dirt or debris. Super Light Done Right Meet the Transfer SL. At 128 grams (25%) lighter than the regular Transfer post, Fox Suspension has branded it as the lightest mainstream dropper post on the market. Period. With lever options for flat bars, drop bars, and 1x and 2x drivetrains it (finally) brings the word “shred” into the super-lightweight cross country (XC) and gravel conversation. Performance Elite Series Dropper Seatpost Performance Elite Transfer Posts retain the same internals, diameter options, drop options, shortened stack heights, patent-pending head design and proven internals as the Factory Series but they feature a black anodised upper instead of a genuine Kashima coating. This Performance Elite series model's anodised upper is ideal for riders who want increased strength and durability on their ride, while also benefitting from its lightweight and responsive actuation. Technologies: - Updated lightweight design. - Updated Windows in lower post allow cable clamp/slack to be pulled from post side for compatibility with GRX-style dropper levers and minimises extra cable housing length. - 2-position mechanical post that locks at the top and bottom only. - Longer travel configurations offer exposed length of 290mm for taller riders. - Shorter travel configurations offer shorter total length for smaller riders. - Coil spring for consistent return performance. - Internal routing only. - 27.2, 30.9 and 31.6mm diameter options to choose from. - 50, 70, 75, and 100mm drop options to choose from. - 70-85deg seat angles are supported. - 7mm and 7x9 saddle rails supported. - 1x lever is Matchmaker, Shimano GRX, and I-SPEC EV compatible (levers available separately). Manufacturer's Part Numbers: 925-01-203 350mm 27.2 x 50mm 925-01-202 370mm 27.2 x 70mm 925-01-210 355mm 30.9 x 75mm 925-01-208 380mm 30.9 x 100mm 925-01-211 355mm 31.6 x 75mm 925-01-209 380mm 31.6 x 100mm
Fox Suspension Transfer SL Perf Elite Dropper PostThis dropper seatpost is part of the renowned Performance Elite series and it features a black anodised upper coating for an extra level of protection against wear and corrosion wherever your next adventure leads you. Fox Suspension has also kitted it out with a powdercoat lower coating that allows it to handle all of challenges associated with all-day epics on your favourite trails and day-long adventures on your gravel bike. Also benefitting from internal cable routing, this versatile model provides a sleek look on your ride while also minimising any risk of damage from dirt or debris.Super Light Done RightMeet the Transfer SL. At 128 grams (25%) lighter than the regular Transfer post, Fox Suspension has branded it as the lightest mainstream dropper post on the market. Period. With lever options for flat bars, drop bars, and 1x and 2x drivetrains it (finally) brings the word “shred” into the super-lightweight cross country (XC) and gravel conversation.Performance Elite Series Dropper SeatpostPerformance Elite Transfer Posts retain the same internals, diameter options, drop options, shortened stack heights, patent-pending head design and proven internals as the Factory Series but they feature a black anodised upper instead of a genuine Kashima coating. This Performance Elite series model's anodised upper is ideal for riders who want increased strength and durability on their ride, while also benefitting from its lightweight and responsive actuation.Features: Upper Coating: Black Anodised Lower Coating: Powdercoat Black Use: Mountain Bike (MTB), Cross Country (XC) and Gravel Cable Routing: Internal only Remote Included: No, available separately Weight: 27.2x50mm Option: 327g; 27.2x70mm Option: 338g; 30.9x75mm Option: 342g; 30.9x100mm Option: 347g; 31.6x75mm Option: 352g; 31.6x100mm Option: 359gTechnologies: Updated lightweight design. Updated Windows in lower post allow cable clamp/slack to be pulled from post side for compatibility with GRX-style dropper levers and minimises extra cable housing length. 2-position mechanical post that locks at the top and bottom only. Longer travel configurations offer exposed length of 290mm for taller riders. Shorter travel configurations offer shorter total length for smaller riders. Coil spring for consistent return performance. Internal routing only. 27.2, 30.9 and 31.6mm diameter options to choose from. 50, 70, 75, and 100mm drop options to choose from. 70-85deg seat angles are supported. 7mm and 7x9 saddle rails supported. 1x lever is Matchmaker, Shimano GRX, and I-SPEC EV compatible (levers available separately).Manufacturer's Part Numbers: 925-01-203 350mm 27.2 x 50mm 925-01-202 370mm 27.2 x 70mm 925-01-210 355mm 30.9 x 75mm 925-01-208 380mm 30.9 x 100mm 925-01-211 355mm 31.6 x 75mm 925-01-209 380mm 31.6 x 100mmBuy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The SL is 25% lighter than our standard transfer post, making it the lightest mainstream dropper on the market. With lever options for drop bars, flat bars, and 2x front shifters, it's the perfect upgrade for Gravel riders and diehard xc racers who want the Performance of a dropper but not the extra heft. Levers sold separately. Features: NEW lightweight design. NEW Windows in lower post allow cable clamp/slack to be pulled from post side for compatibility with GRX-style dropper levers and minimises extra cable housing length. 2-position mechanical post that locks at the top and bottom only. Longer travel configurations offer exposed length of 290mm for taller riders. Shorter travel configurations offer shorter total length for smaller riders. Coil spring for consistent return performance. Internal routing only. 27.2, 30.9 and 31.6mm diameters. 50, 70, 75, and 100mm drop options. 70-85deg seat angles are supported. 7mm and 7x9 ‘Ob-round' saddle rails supported. 1x lever is Matchmaker, Shimano GRX, and I-SPEC EV compatible.
Performance Elite Transfer Posts retain the same internals, diameter options, drop options, shortened stack heights, new patent-pending head design and proven internals as the Factory Series but have a black anodized upper. Sizes: Diameter Sizes - 30.9/31.6mm Metric Sizes - 100mm/125mm/150mm/175mm Routing - Internal Only Lower Coating - Powdercoat Black Upper Coating - Black Anodized Specs and Family Features: Patent-pending clamp design dramatically reduces stack height Proven Transfer internals with even easier serviceability than 2020 model 25g lighter than 2020 Transfer NEW lightweight under-bar 1x lever design – or existing 2x lever - Purchased separately Updated design Reduced overall length and insertion depth: 175mm, 30.6mm shorter than 2020 Transfer, 8.6mm insertion depth reduction 150mm, 38.7mm shorter than 2020 Transfer, 15.5mm insertion depth reduction 125mm, 43.5mm shorter than 2020 Transfer, 20.3mm insertion depth reduction 100mm, 48.4mm shorter than 2020 Transfer, 25.2mm insertion depth reduction
This MTB dropper seatpost features a rock-solid aluminium construction with an anodised finish, making it more than capable of handling the toughest of rides in all-weather conditions. Fox Suspension has also equipped this model with a patented saddle clamp design that reduces its overall weight.
Coming kitted out with a Super Light Steel (SLS) construction, this mountain bike (MTB) rear shock spring is lighter than titanium springs and more affordable. It's equipped with a proprietary surface treatment and stress relief process that removes residual stresses from the spring, allowing it to withstand higher stresses. Each spring is also optimised by using a smaller wire diameter and fewer coils, creating a lighter spring. Compatible with Fox DHX2 and Van RC rear shocks from 2016 onwards. All SLS springs are orange and are marked with their spring rate in lbs/in (in 25lb increments) and the maximum travel of the shock that they are designed to be paired with. Please note: This model is intended for Fox DHX2 and Van RC rear shocks from 2016 onwards. If you have a rear shock that's from before 2016, an SLS spring retainer is required (available separately). Manufacturer's Part Numbers: 033-22-046 Orange 375lb 033-22-047 Orange 400lb 033-22-048 Orange 425lb 033-22-049 Orange 450lb 033-22-050 Orange 475lb 033-22-051 Orange 500lb 033-22-063 Orange 525lb 033-22-052 Orange 550lb
Fox Suspension SLS MTB Rear Shock Spring (3.15" Travel)This mountain bike (MTB) rear shock spring comes kitted out with a Super Light Steel (SLS) construction that's lighter than titanium springs and more affordable. It's equipped with a proprietary surface treatment and stress relief process that removes residual stresses from the spring, allowing it to withstand higher stresses. Each spring is also optimised by using a smaller wire diameter and fewer coils, creating a lighter spring. Compatible with Fox DHX2 and Van RC rear shocks from 2016 onwards. All SLS springs are orange and are marked with their spring rate in lbs/in (in 25lb increments) and the maximum travel of the shock that they are designed to be paired with.Please note: This model is intended for Fox DHX2 and Van RC rear shocks from 2016 onwards. If you have a rear shock that's from before 2016, an SLS spring retainer is required (available separately).Features: Material: Super Light Steel (SLS) Use: MTB Type: Rear Shock Spring Spring Travel: 3.15" Inner Diameter: 1.385 inches (35mm)) Compatibility: Fox DHX2 and Van RC rear shocks (2016+) Size: Multiple options available to selectManufacturer's Part Number: 033-22-046 Orange 375lb 033-22-047 Orange 400lb 033-22-048 Orange 425lb 033-22-049 Orange 450lb 033-22-050 Orange 475lb 033-22-051 Orange 500lb 033-22-063 Orange 525lb 033-22-052 Orange 550lbBuy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fox Suspension SLS MTB Rear Shock Spring (3.15" Travel)This mountain bike (MTB) rear shock spring comes kitted out with a Super Light Steel (SLS) construction that's lighter than titanium springs and more affordable. It's equipped with a proprietary surface treatment and stress relief process that removes residual stresses from the spring, allowing it to withstand higher stresses. Each spring is also optimised by using a smaller wire diameter and fewer coils, creating a lighter spring. Compatible with Fox DHX2 and Van RC rear shocks from 2016 onwards. All SLS springs are orange and are marked with their spring rate in lbs/in (in 25lb increments) and the maximum travel of the shock that they are designed to be paired with.Please note: This model is intended for Fox DHX2 and Van RC rear shocks from 2016 onwards. If you have a rear shock that's from before 2016, an SLS spring retainer is required (available separately).Features: Material: Super Light Steel (SLS) Use: MTB Type: Rear Shock Spring Spring Travel: 3.15" Inner Diameter: 1.385 inches (35mm)) Compatibility: Fox DHX2 and Van RC rear shocks (2016+) Size: Multiple options available to selectManufacturer's Part Number: 033-22-046 Orange 375lb 033-22-047 Orange 400lb 033-22-048 Orange 425lb 033-22-049 Orange 450lb 033-22-050 Orange 475lb 033-22-051 Orange 500lb 033-22-063 Orange 525lb 033-22-052 Orange 550lbBuy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fox Suspension SLS MTB Rear Shock Spring (2.65" Travel)This mountain bike (MTB) rear shock spring features a Super Light Steel (SLS) construction that's lighter than titanium springs and more affordable. It's equipped with a proprietary surface treatment and stress relief process that removes residual stresses from the spring, allowing it to withstand higher stresses. Each spring is also optimised by using a smaller wire diameter and fewer coils, creating a lighter spring. Compatible with Fox DHX2 and Van RC rear shocks from 2016 onwards. All SLS springs are orange and are marked with their spring rate in lbs/in (in 25lb increments) and the maximum travel of the shock that they are designed to be paired with.Please note: This model is intended for Fox DHX2 and Van RC rear shocks from 2016 onwards. If you have a rear shock that's from before 2016, an SLS spring retainer is required (available separately).Features: Material: Super Light Steel (SLS) Use: MTB Type: Rear Shock Spring Spring Travel: 2.65" Inner Diameter: 1.385 inches (35mm)) Compatibility: Fox DHX2 and Van RC rear shocks (2016+) Size: Multiple options available to selectManufacturer's Part Number: 033-22-021 Orange 450lb 033-22-022 Orange 475lb 033-22-023 Orange 500lb 033-22-024 Orange 550lb 033-22-025 Orange 600lb 033-22-026 Orange 650lb 033-22-027 Orange 700lbBuy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fox Suspension SLS MTB Rear Shock Spring (2.9" Travel)This mountain bike (MTB) rear shock spring features a Super Light Steel (SLS) construction that's lighter than titanium springs and more affordable. It's equipped with a proprietary surface treatment and stress relief process that removes residual stresses from the spring, allowing it to withstand higher stresses. Each spring is also optimised by using a smaller wire diameter and fewer coils, creating a lighter spring. Compatible with Fox DHX2 and Van RC rear shocks from 2016 onwards.All SLS springs are orange and are marked with their spring rate in lbs/in (in 25lb increments) and the maximum travel of the shock that they are designed to be paired with.Please note: This model is intended for Fox DHX2 and Van RC rear shocks from 2016 onwards. If you have a rear shock that's from before 2016, an SLS spring retainer is required (available separately).Features: Material: Super Light Steel (SLS) Use: MTB Type: Rear Shock Spring Spring Travel: 2.9" Inner Diameter: 1.385 inches (35mm)) Compatibility: Fox DHX2 and Van RC rear shocks (2016+) Size: Multiple options available to selectManufacturer's Part Number: 033-22-030 Orange 350lb 033-22-031 Orange 375lb 033-22-032 Orange 400lb 033-22-033 Orange 425lb 033-22-034 Orange 450lb 033-22-035 Orange 475lb 033-22-036 Orange 500lb 033-22-037 Orange 550lb 033-22-038 Orange 600lbBuy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Featuring a Super Light Steel (SLS) construction, this mountain bike (MTB) rear shock spring is lighter than titanium springs and more affordable. It's equipped with a proprietary surface treatment and stress relief process that removes residual stresses from the spring, allowing it to withstand higher stresses. Each spring is also optimised by using a smaller wire diameter and fewer coils, creating a lighter spring. Compatible with Fox DHX2 and Van RC rear shocks from 2016 onwards. All SLS springs are orange and are marked with their spring rate in lbs/in (in 25lb increments) and the maximum travel of the shock that they are designed to be paired with. Please note: This model is intended for Fox DHX2 and Van RC rear shocks from 2016 onwards. If you have a rear shock that's from before 2016, an SLS spring retainer is required (available separately). Manufacturer's Part Numbers: 033-22-021 Orange 450lb 033-22-022 Orange 475lb 033-22-023 Orange 500lb 033-22-024 Orange 550lb 033-22-025 Orange 600lb 033-22-026 Orange 650lb 033-22-027 Orange 700lb
Fox Suspension SLS MTB Rear Shock Spring (2.65" Travel)This mountain bike (MTB) rear shock spring features a Super Light Steel (SLS) construction that's lighter than titanium springs and more affordable. It's equipped with a proprietary surface treatment and stress relief process that removes residual stresses from the spring, allowing it to withstand higher stresses. Each spring is also optimised by using a smaller wire diameter and fewer coils, creating a lighter spring. Compatible with Fox DHX2 and Van RC rear shocks from 2016 onwards. All SLS springs are orange and are marked with their spring rate in lbs/in (in 25lb increments) and the maximum travel of the shock that they are designed to be paired with.Please note: This model is intended for Fox DHX2 and Van RC rear shocks from 2016 onwards. If you have a rear shock that's from before 2016, an SLS spring retainer is required (available separately).Features: Material: Super Light Steel (SLS) Use: MTB Type: Rear Shock Spring Spring Travel: 2.65" Inner Diameter: 1.385 inches (35mm)) Compatibility: Fox DHX2 and Van RC rear shocks (2016+) Size: Multiple options available to selectManufacturer's Part Number: 033-22-021 Orange 450lb 033-22-022 Orange 475lb 033-22-023 Orange 500lb 033-22-024 Orange 550lb 033-22-025 Orange 600lb 033-22-026 Orange 650lb 033-22-027 Orange 700lbBuy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
◌Fox Suspension Steel 2.8" Travel Rear Shock SpringFeaturing a hard-wearing steel construction, this mountain bike (MTB) rear shock spring offers durable and reliable performance as you conquer every trail-riding adventure. All standard steel springs are black and are marked with their spring rate in lbs/in (in 50lb increments) and the total travel of the spring itself. Standard black springs should only be paired with shocks having less travel than the travel marked on the spring itself. Features: Material: Steel Use: MTB Type: Rear Shock Spring Spring Travel: 2.8" Inner Diameter: 1.385 inches (35mm) Compatibility: All Fox coil rear shocks Size: Multiple options available to selectManufacturer's Part Numbers: 039-00-600 Black 550lb 039-03-001 Black 350lb 039-03-002 Black 400lb 039-03-003 Black 450lb 039-03-004 Black 500lb 039-03-010 Black 700lbBuy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Featuring a Super Light Steel (SLS) construction, this mountain bike (MTB) rear shock spring is lighter than titanium springs and more affordable. It's equipped with a proprietary surface treatment and stress relief process that removes residual stresses from the spring, allowing it to withstand higher stresses. Each spring is also optimised by using a smaller wire diameter and fewer coils, creating a lighter spring. Compatible with Fox DHX2 and Van RC rear shocks from 2016 onwards. All SLS springs are orange and are marked with their spring rate in lbs/in (in 25lb increments) and the maximum travel of the shock that they are designed to be paired with. Please note: This model is intended for Fox DHX2 and Van RC rear shocks from 2016 onwards. If you have a rear shock that's from before 2016, an SLS spring retainer is required (available separately). Manufacturer's Part Numbers: 033-22-030 Orange 350lb 033-22-031 Orange 375lb 033-22-032 Orange 400lb 033-22-033 Orange 425lb 033-22-034 Orange 450lb 033-22-035 Orange 475lb 033-22-036 Orange 500lb 033-22-037 Orange 550lb 033-22-038 Orange 600lb
Fox Suspension SLS MTB Rear Shock Spring (2.9" Travel)This mountain bike (MTB) rear shock spring features a Super Light Steel (SLS) construction that's lighter than titanium springs and more affordable. It's equipped with a proprietary surface treatment and stress relief process that removes residual stresses from the spring, allowing it to withstand higher stresses. Each spring is also optimised by using a smaller wire diameter and fewer coils, creating a lighter spring. Compatible with Fox DHX2 and Van RC rear shocks from 2016 onwards.All SLS springs are orange and are marked with their spring rate in lbs/in (in 25lb increments) and the maximum travel of the shock that they are designed to be paired with.Please note: This model is intended for Fox DHX2 and Van RC rear shocks from 2016 onwards. If you have a rear shock that's from before 2016, an SLS spring retainer is required (available separately).Features: Material: Super Light Steel (SLS) Use: MTB Type: Rear Shock Spring Spring Travel: 2.9" Inner Diameter: 1.385 inches (35mm)) Compatibility: Fox DHX2 and Van RC rear shocks (2016+) Size: Multiple options available to selectManufacturer's Part Number: 033-22-030 Orange 350lb 033-22-031 Orange 375lb 033-22-032 Orange 400lb 033-22-033 Orange 425lb 033-22-034 Orange 450lb 033-22-035 Orange 475lb 033-22-036 Orange 500lb 033-22-037 Orange 550lb 033-22-038 Orange 600lbBuy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.