Fox Suspension Float DPS Factory Shock SVFeaturing a lightweight EVOL air spring, this mountain bike (MTB) rear shock delivers exceptional responsiveness and sensitivity as you charge from trail to trail. Fox Suspension has also equipped it with a Dual Piston valve design that improves both rebound and compression flow for a smoother ride. Part of the renowned Factory Series, this version has a genuine Kashima coating on its body and air sleeve, which offers enhanced lubrication and a harder wearing surface, resulting in increased shock smoothness and sensitivity on the trails.Factory Series MTB Rear Shock with DPS DamperReady for wherever your next trail-riding adventure takes you, this MTB rear shock comes kitted out with a DPS damper to keep your ride under control. Its damper features three positions of adjustment, where you can choose from Open, Medium and Firm modes to tailor how you want it to respond to the terrain conditions. Fox Suspension has also equipped it with an Open mode adjust tuning range (1, 2, 3) as well as adjustable rebound and air spring pressure. This gives you everything you need to dial-in your ideal settings for rear suspension performance that matches your riding style as well as the terrain.Exceptional Bump Compliance Meets Exceptional Efficiency With a lightweight chassis, EVOL air spring, and dual piston damper with 3-position switch, the Fox Suspension Float DPS Factory Shock SV creates a pedal-friendly shock that soaks up the bumps and delivers pedal power to the ground with utmost efficiency.Features: Body Finish: Genuine Kashima Coat Air Sleeve Finish: Genuine Kashima Coat Use: MTB Lever Actuated: Yes, 3-position lever Damper: DPS with three adjustment positions: Open/Medium/Firm modes Open mode adjust tuning range (1, 2, 3), Rebound and Air Spring Pressure Air Sleeve: One-piece EVOL air sleeve Piston Valve: Dual Piston valve Type: Standard Volume (SV)Technologies: Factory Series: “Factory” says it all - feature-packed and designed to exceed the demands of our Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. DPS damper with three positions - Open, Medium, Firm modes. Dual Piston valve design improves both rebound and compression flow. Lightweight, one-piece EVOL air sleeve improves responsiveness and sensitivity.Manufacturer's Part Numbers: 972-01-497 Black 6.5 x 1.5" 972-01-498 Black 7.25 x 1.75" 972-01-477 Black 7.875 x 2.0"Buy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fox Suspension Float DPS Factory 3Pos-Adj LV ShockWell-equipped for conquering your way around your local trails and beyond, this Factory Series mountain bike (MTB) rear shock features a DPS damper, an EVOL air spring and a three-position lever for easy adjustability. Coming feature-packed and designed to exceed the demands of Fox Suspension's Factory-level riders, this model boasts a genuine Kashima coating for fantastic durability, amazingly smooth performance and an eye-catching finish that complements any ride.DPS Damper, EVOL Air Spring and AdjustmentsEngineered for the rigours of modern trail riding, this MTB rear shock comes well-equipped with proven technologies to enhance your ride. Its dual piston system (DPS) damper features three positions of adjustment that can be controlled using a lever to choose between Open, Medium and Firm riding modes. Fox Suspension has also kitted out this version with a one-piece EVOL air spring that improves responsiveness and sensitivity, while its range of adjustment features allow you to easily fine-tune its suspension performance. Coming complete with an open mode adjust tuning range (1, 2, 3), rebound and air spring pressure adjustments, the Fox Suspension Float DPS Factory 3Pos-Adj LV Shock is a great choice of upgrade for fine-tuning your rear suspension to match your riding style as well as the terrain conditions.Features: Body Finish: Genuine Kashima coating Air Sleeve Finish: Genuine Kashima coating Use: MTB Spring Type: EVOL Air spring Damper: DPS Adjustments: Three-position lever actuated Open, Medium and Firm modes, Open mode adjust tuning range (1, 2, 3), rebound and air spring pressure Lever Actuated: Yes Remote Actuated: NoTechnologies: Factory Series: “Factory” says it all - feature-packed and designed to exceed the demands of our Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. Updated graphics. Dual Piston valve design improves both rebound and compression flow. Lightweight, one-piece EVOL air sleeve improves responsiveness and sensitivity.Buy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Part of the Performance Elite series, this suspension fork features the exact same adjustments, damper, weight and 7000 series aluminium upper tubes as the Factory Series. The only difference is this version has an anodised finish on its upper tubes for extra protection against wear and corrosion, making it perfect for all weather and terrain conditions. Coming equipped with stiff 15QR x 110mm Boost axle spacing, 160mm travel and a wide range of adjustments, this is a great choice of upgrade for reliable front-end suspension performance wherever your next mountain adventure takes you. Float EVOL Air Spring Optimises small bump sensitivity by increasing negative air spring volume. Its linear spring curve delivers plushness off the top, extra mid-stroke support, and a more tunable bottom-out progression. Fox Suspension GRIP Damper Fox Suspension's GRIP damper is the benchmark for unparalleled ride quality and convenient 3-position adjustability. GRIP includes the brand's Open/Medium/Firm external fine-tuning dial, so you can customise ride performance on-the-fly. The GRIP damper achieves with the twist of a knob when typically, this level of adjustability would require the time-consuming and complicated task of completely disassembling and reassembling the fork. Technologies: Lower Leg Arch: This suspension fork's lower leg design pulls out all the stops, shaving every possible gram while making sure not to compromise the stiffness or strength requirements of modern enduro and gravity-style riding. Lower Leg Bleeders: Allows for atmospheric pressure equalization for better fork performance, allowing full travel to be achieved and increasing small bump sensitivity and responsiveness. Lower Leg Bypass Channels: Increasing air volume within the lower legs reduces the amount of additional unintended pressure ramping. Lower leg bath oil also circulates to the upper reaches of the legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel. Kabolt X Axle: Kabolt X is a lightweight bolt-on floating axle to shave grams and increase torsional stiffness via a sleeveless, single-sided pinch bolt design.
Fox Suspension 36 Float Performance Boost ForkAn ideal addition to your mountain bike's (MTB's) front end for taking on the toughest enduro trails in the World, the 36 Float Performance fork will soak up the biggest drops and hits as you dominate on all types of terrain.This high-quality mountain bike (MTB) suspension fork is trail-ready with anodised upper tubes for hard-wearing performance and durability wherever your next ride takes you. Engineered for everything from day long epics on your favourite trails, it's kitted out with Boost axle spacing for extra stiffness as you dominate your way around the mountain. Another highlight is its lightweight Float air spring and GRIP damper for excellent tuneability and control. As a result, it's easy to dial in your settings to match your riding style as well as the terrain. Equipped with some of Fox's finest technologies, this suspension fork is a great choice of upgrade for singletrack trail riding, bike park routes and enduro racing.Inspired from moto, the GRIP damper uses Fox Suspension's FIT sealed cartridge technology combined with a coil-sprung, independent floating piston. GRIP allows excess oil to purge through specially designed ports at the top of the damper to maintain consistent damping and increase durability.E-MTB Compatible Suspension ForkCompatible electric mountain bikes (E-MTB), this suspension fork is built to perform everywhere from big backcountry routes to the EWS circuit. No stranger to winning awards, accolades and Enduro World Series (EWS) races, it features a new design inside-and-out and it's part of Fox Suspension's Performance Series which includes an anodised finish on its upper tubes for extra protection against wear and corrosion. It's also equipped with Boost axle spacing for additional stiffness, making it ideal for modern enduro riding. Coming complete with a Float EVOL air spring and a GRIP damper with three-position on-the-fly adjustability, this E-bike-ready fork provides a wide range of customisation, so you can benefit from a more rider-tuned feel.Fox Suspension GRIP DamperFox Suspension's GRIP damper is the benchmark for unparalleled ride quality and convenient 3-position adjustability. GRIP includes the brand's Open/Medium/Firm external fine-tuning dial, so you can customise ride performance on-the-fly. The GRIP damper achieves with the twist of a knob when typically, this level of adjustability would require the time-consuming and complicated task of completely disassembling and reassembling the fork.Float Air SpringEVOL technology increases negative air spring volume, optimising small bump sensitivity. EVOL’s linear spring curve delivers plushness off the top, extra mid-stroke support, and more tunable bottom-out progression. The benefits of EVOL are further enhanced by Fox Suspension's updated Lower Leg channels, which functions to reduce air pressure captured in the lower legs, allowing the EVOL air spring to operate freely without unintended interference.Features: Upper Tube Finish: Black Anodized Intended Use: Trail Air Spring: FLOAT EVOL Damper: GRIP (Open/Medium/Firm) Travel: 160mm Wheel Size: 27.5" Axle: 15QR x 110mm Boost Steerer: 1.1.8" to 1.5" Tapered Offset: 44mm Air Channels: Yes Bleeders: Yes Floating Axle: Yes, Kabolt X Axle 15QR x 110mm Boost Rotor Size: 180mm direct Post Mount, Up to 230mm compatible Mud Guard Mount: Optional FOX 36/38 Mud Guard with sturdy 4-point direct-mount attachment (Sold separately)Technologies: Performance Series: Performance Series forks retain the same black anodized 7000 series aluminium upper tubes as Performance Elite, except paired with a GRIP damper. Push-button bleeders are not included but can be purchased separately Adjustments: Three on-the-fly compression damping positions Open, Medium, Firm. Additional micro-adjust between settings Detents. Low-speed rebound 10 clicks Floating Axle: Floating axles might look similar to other axles, but in fact they offer a distinct performance advantage due to their unique ability to match the exact width of the fork’s wheel mounting surface precisely to the front hub flange spacing, thus creating perfect chassis alignment and eliminating unwanted friction between the upper and lower fork legs. Floating axles provide much smoother suspension movement throughout the entire range of the fork’s travel, notably improving sensitivity and overall ride quality. The all-new 36 and 38 come equipped with a new quick-release lever operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release. With this system, spacing is locked in via a floating sleeve, allowing repeated front wheel removal and reinstallation while maintaining perfect fork alignment. Floating sleeve positioning comes preset from the factory so if you are unsure of how to operate the floating axle system or simply don’t want to bother with it, you can just install the front wheel and get on with your ride Lower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel Lower Leg Arch: Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. Fox Suspension's lower leg design pulls out all the stops, shaving every possible gram while making sure not to compromise stiffness or strength requirements of modern enduro and gravity style riding. Modern frame designs and geometry trends require modern suspension design solutions. The arch design of the all-new 36, 38, and 40 is designed to pair perfectly with modern Enduro and Downhill bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension's arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modelling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material Increased crown diameter to match modern frame shape profiles Optional mudguard with sturdy 4-point direct-mount attachment protects upper tubes and dust wipers from dirt and debris. (Available separately)Buy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fox Suspension 36 Float Performance Boost ForkAn ideal addition to your mountain bike's (MTB's) front end for taking on the toughest enduro trails in the World, the 36 Float Performance fork will soak up the biggest drops and hits as you dominate on all types of terrain.This high-quality mountain bike (MTB) suspension fork is trail-ready with anodised upper tubes for hard-wearing performance and durability wherever your next ride takes you. Engineered for everything from day long epics on your favourite trails, it's kitted out with Boost axle spacing for extra stiffness as you dominate your way around the mountain. Another highlight is its lightweight Float air spring and GRIP damper for excellent tuneability and control. As a result, it's easy to dial in your settings to match your riding style as well as the terrain. Equipped with some of Fox's finest technologies, this suspension fork is a great choice of upgrade for singletrack trail riding, bike park routes and enduro racing.Inspired from moto, the GRIP damper uses Fox Suspension's FIT sealed cartridge technology combined with a coil-sprung, independent floating piston. GRIP allows excess oil to purge through specially designed ports at the top of the damper to maintain consistent damping and increase durability.E-MTB Compatible Suspension ForkCompatible electric mountain bikes (E-MTB), this suspension fork is built to perform everywhere from big backcountry routes to the EWS circuit. No stranger to winning awards, accolades and Enduro World Series (EWS) races, it features a new design inside-and-out and it's part of Fox Suspension's Performance Series which includes an anodised finish on its upper tubes for extra protection against wear and corrosion. It's also equipped with Boost axle spacing for additional stiffness, making it ideal for modern enduro riding. Coming complete with a Float EVOL air spring and a GRIP damper with three-position on-the-fly adjustability, this E-bike-ready fork provides a wide range of customisation, so you can benefit from a more rider-tuned feel.Fox Suspension GRIP DamperFox Suspension's GRIP damper is the benchmark for unparalleled ride quality and convenient 3-position adjustability. GRIP includes the brand's Open/Medium/Firm external fine-tuning dial, so you can customise ride performance on-the-fly. The GRIP damper achieves with the twist of a knob when typically, this level of adjustability would require the time-consuming and complicated task of completely disassembling and reassembling the fork.Float Air SpringEVOL technology increases negative air spring volume, optimising small bump sensitivity. EVOL’s linear spring curve delivers plushness off the top, extra mid-stroke support, and more tunable bottom-out progression. The benefits of EVOL are further enhanced by Fox Suspension's updated Lower Leg channels, which functions to reduce air pressure captured in the lower legs, allowing the EVOL air spring to operate freely without unintended interference.Features: Upper Tube Finish: Black Anodized Intended Use: Trail Air Spring: FLOAT EVOL Damper: GRIP (Open/Medium/Firm) Travel: 160mm Wheel Size: 27.5" Axle: 15QR x 110mm Boost Steerer: 1.1.8" to 1.5" Tapered Offset: 44mm Air Channels: Yes Bleeders: Yes Floating Axle: Yes, Kabolt X Axle 15QR x 110mm Boost Rotor Size: 180mm direct Post Mount, Up to 230mm compatible Mud Guard Mount: Optional FOX 36/38 Mud Guard with sturdy 4-point direct-mount attachment (Sold separately)Technologies: Performance Series: Performance Series forks retain the same black anodized 7000 series aluminium upper tubes as Performance Elite, except paired with a GRIP damper. Push-button bleeders are not included but can be purchased separately Adjustments: Three on-the-fly compression damping positions Open, Medium, Firm. Additional micro-adjust between settings Detents. Low-speed rebound 10 clicks Floating Axle: Floating axles might look similar to other axles, but in fact they offer a distinct performance advantage due to their unique ability to match the exact width of the fork’s wheel mounting surface precisely to the front hub flange spacing, thus creating perfect chassis alignment and eliminating unwanted friction between the upper and lower fork legs. Floating axles provide much smoother suspension movement throughout the entire range of the fork’s travel, notably improving sensitivity and overall ride quality. The all-new 36 and 38 come equipped with a new quick-release lever operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release. With this system, spacing is locked in via a floating sleeve, allowing repeated front wheel removal and reinstallation while maintaining perfect fork alignment. Floating sleeve positioning comes preset from the factory so if you are unsure of how to operate the floating axle system or simply don’t want to bother with it, you can just install the front wheel and get on with your ride Lower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel Lower Leg Arch: Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. Fox Suspension's lower leg design pulls out all the stops, shaving every possible gram while making sure not to compromise stiffness or strength requirements of modern enduro and gravity style riding. Modern frame designs and geometry trends require modern suspension design solutions. The arch design of the all-new 36, 38, and 40 is designed to pair perfectly with modern Enduro and Downhill bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension's arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modelling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material Increased crown diameter to match modern frame shape profiles Optional mudguard with sturdy 4-point direct-mount attachment protects upper tubes and dust wipers from dirt and debris. (Available separately)Buy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Featuring a lightweight EVOL air spring, this mountain bike (MTB) rear shock offers fantastic responsiveness and sensitivity as you charge through the more demanding of terrain conditions. Fox Suspension has also equipped it with a Dual Piston valve design that improves both rebound and compression flow for a smoother ride. Part of the renowned Factory Series, this version has a genuine Kashima coating on its body and air sleeve, which offers enhanced lubrication and a harder wearing surface, resulting in increased shock smoothness and sensitivity on the trails. Factory Series MTB Rear Shock with DPS Damper Ready for wherever your next trail-riding adventure takes you, this MTB rear shock comes kitted out with a DPS damper to keep your ride under control. Its damper features three positions of adjustment, where you can choose from Open, Medium and Firm modes to tailor how you want it to respond to the terrain conditions. Fox Suspension has also equipped it with an Open mode adjust tuning range (1, 2, 3) as well as adjustable rebound and air spring pressure. This gives you everything you need to dial-in your ideal settings for rear suspension performance that matches your riding style as well as the terrain. Exceptional Bump Compliance Meets Exceptional Efficiency With a lightweight chassis, EVOL air spring, and dual piston damper with 3-position switch, the Fox Suspension Float DPS Factory Shock SV creates a pedal-friendly shock that soaks up the bumps and delivers pedal power to the ground with utmost efficiency. Technologies: Factory Series: “Factory” says it all – feature-packed and designed to exceed the demands of our Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. DPS damper with three positions - Open, Medium, Firm modes. Dual Piston valve design improves both rebound and compression flow. Lightweight, one-piece EVOL air sleeve improves responsiveness and sensitivity. Manufacturer's Part Numbers: 972-01-475 Black 7.875 x 2.0" 972-01-476 Black 7.875 x 2.25" 972-01-474 Black 7.5 x 2.0"
Fox Suspension Float X2 Factory 2-Position Adjust ShockFeaturing an updated chassis and damper, this high-quality mountain bike (MTB) rear shock delivers game-changing performance as you conquer the most demanding of trail conditions. Part of Fox Suspension's renowned Factory Series, this model is packed with features and includes a genuine Kashima coating for increased durability as well as slippery smooth operation on your ride. Coming equipped with a two-position open/firm lever for easy adjustment, Variable Valve Control (VVC) for improved high-speed rebound tunability and a lightweight air spring that provides coil-like comfort, this model is a perfect upgrade for smooth and reliable rear-end suspension.Features: Finish: Genuine Kashima coating Use: MTB Spring Type: Air spring Adjustment Lever: 2-position Open/Firm lever (retains high and low speed compression adjustment) Adjustment Features: High and low speed compression, high and low speed rebound Variable Valve Control (VVC) Rebound: Yes Max PSI: 300psiTechnologies: Factory Series: “Factory” says it all - feature-packed and designed to exceed the demands of our Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. Updated Damper: The Float X2's 4-way adjustable, twin-tube architecture now features patented Variable Valve Control (VVC) technology on the high-speed rebound circuit for unrivalled external fine-tuning. Updated compression ratios and a MCU bumper deliver improved progressivity and bottom out control with fewer volume spacers. Independent Firm Mode Circuit: A 2-position switch operates on an independent circuit, providing a notably firmer lockout than before, allowing for efficient climbing and wide-open descending. Updated Chassis: Float X2's entirely revised chassis features an ultra-low friction hard chrome damper shaft, updated low-friction bushings and seals, and genuine Kashima coated outer body for smoother performance than ever before. High-flow main piston. Improved bearing ratio for metric sizes. Improved high-speed rebound tunability via addition of VVC (Variable Valve Control). Increased control and decreased harshness via linear damping. Reduced length reservoir for better fit on more frames. Finned inner body for improved structural rigidity and reduced hysteresis. Matching 8-click HSC and HSR adjustment on GRIP2 forks and X2 shocks. Updated compression ratios, 300psi max.Buy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Designed to exceed the demands of Fox Suspension's Factory-level riders, this Factory Series mountain bike (MTB) rear shock is kitted out with a genuine Kashima coating that provides increased durability, silky smooth operation and an eye-catching finish that complements any ride. EVOL Air Spring and Adjustments The Float DPS helps you make perfect turns without cutting corners by using a dual-piston system that pairs exceptional bump compliance with efficiency to conserve energy for when you need it most. It's also kitted out with a one-piece EVOL air spring that improves responsiveness and sensitivity, while its range of adjustment features allow you to easily fine-tune its suspension performance. Thanks to its remote actuation, you can effortlessly switch between open and firm modes to match the terrain conditions. This model is also equipped with adjustable rebound and air spring pressure, so you can dial-in your ideal settings for a more rider-tuned feel. The Fox Suspension Float DPS Factory Remote Shock's lightweight chassis, EVOL air spring, and dual-piston (DPS) damper create a pedal-friendly shock that soaks up the bumps and delivers pedal power to the ground with utmost efficiency. Technologies: Factory Series: “Factory” says it all – feature-packed and designed to exceed the demands of our Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. Updated graphics. Dual Piston valve design improves both rebound and compression flow. Lightweight, one-piece EVOL air sleeve improves responsiveness and sensitivity. Manufacturer's Part Numbers: 972-01-509 Black 6.5x1.5" 972-01-512 Black 7.25x1.75" 972-01-508 Black 7.5x2.0"
Coming feature-packed and designed to exceed the demands of Fox Suspension's Factory-level riders, this Factory Series mountain bike (MTB) rear shock boasts a genuine Kashima coating for fantastic durability, amazingly smooth performance and an eye-catching finish that complements your ride. DPS Damper, EVOL Air Spring and Adjustments Engineered for the rigours of modern trail riding, this MTB rear shock comes well-equipped with proven technologies to enhance your ride. Its dual piston system (DPS) damper features three positions of adjustment that can be controlled using a lever to choose between Open, Medium and Firm riding modes. Fox Suspension has also kitted out this version with a one-piece EVOL air spring that improves responsiveness and sensitivity, while its range of adjustment features allow you to easily fine-tune its suspension performance. Coming complete with an open mode adjust tuning range (1, 2, 3), rebound and air spring pressure adjustments, the Fox Suspension Float DPS Factory 3Pos-Adj Shock is a great choice of upgrade for fine-tuning your rear suspension to match your riding style as well as the terrain conditions. Technologies: Factory Series: “Factory” says it all – feature-packed and designed to exceed the demands of our Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. Updated graphics. Dual Piston valve design improves both rebound and compression flow. Lightweight, one-piece EVOL air sleeve improves responsiveness and sensitivity. Manufacturer's Part Numbers: 972-01-467 Black 190x40mm Metric 972-01-468 Black 190x42.5mm Metric 972-01-469 Black 190x45mm Metric 972-01-470 Black 210x50mm Metric 972-01-471 Black 210x55mm Metric
Fox Suspension Float DPS Factory Remote Rear MTB ShockCombining an EVOL air spring, remote actuated open and firm modes as well as rebound and air spring pressure adjustments, this Factory Series mountain bike (MTB) rear shock is a perfect upgrade for uncompromised performance on your ride. Packed with features that are designed to exceed the demands of Fox Suspension's Factory-level riders, this model is kitted out with a genuine Kashima coating that provides increased durability, silky smooth operation and an eye-catching finish that complements any ride.EVOL Air Spring and AdjustmentsThe Float DPS helps you make perfect turns without cutting corners by using a dual piston system that pairs exceptional bump compliance with efficiency to conserve energy for when you need it most. It's also kitted out with a one-piece EVOL air spring that improves responsiveness and sensitivity, while its range of adjustment features allow you to easily fine-tune its suspension performance. Thanks to its remote actuation, you can effortlessly switch between open and firm modes to match the terrain conditions. This model is also equipped with adjustable rebound and air spring pressure, so you can dial-in your ideal settings for a more rider-tuned feel.The Fox Suspension Float DPS Factory Remote Shock's lightweight chassis, EVOL air spring, and dual piston (DPS) damper create a pedal-friendly shock that soaks up the bumps and delivers pedal power to the ground with utmost efficiency.Features: Body Finish: Genuine Kashima coating Air Sleeve Finish: Genuine Kashima coating Use: MTB Spring Type: EVOL Air spring Damper: DPS Adjustments: Two-position remote actuated Open and Firm modes, rebound and air spring pressure Remote Actuated: Yes Remote Included: No, available separatelyTechnologies: Factory Series: “Factory” says it all - feature-packed and designed to exceed the demands of our Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. Updated graphics. Dual Piston valve design improves both rebound and compression flow. Lightweight, one-piece EVOL air sleeve improves responsiveness and sensitivity.Buy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fox Suspension Float DPS Factory 3-Position Adj ShockAll set for hitting your favourite local trails, this Factory Series mountain bike (MTB) rear shock combines a DPS damper, an EVOL air spring and a three-position lever for easy adjustability. Coming feature-packed and designed to exceed the demands of Fox Suspension's Factory-level riders, this model boasts a genuine Kashima coating for fantastic durability, amazingly smooth performance and an eye-catching finish that complements any ride.DPS Damper, EVOL Air Spring and AdjustmentsEngineered for the rigours of modern trail riding, this MTB rear shock comes well-equipped with proven technologies to enhance your ride. Its dual piston system (DPS) damper features three positions of adjustment that can be controlled using a lever to choose between Open, Medium and Firm riding modes. Fox Suspension has also kitted out this version with a one-piece EVOL air spring that improves responsiveness and sensitivity, while its range of adjustment features allow you to easily fine-tune its suspension performance. Coming complete with an open mode adjust tuning range (1, 2, 3), rebound and air spring pressure adjustments, the Fox Suspension Float DPS Factory 3Pos-Adj Shock is a great choice of upgrade for fine-tuning your rear suspension to match your riding style as well as the terrain conditions.Features: Body Finish: Genuine Kashima coating Air Sleeve Finish: Genuine Kashima coating Use: MTB Spring Type: EVOL Air spring Damper: DPS Adjustments: Three-position lever actuated Open, Medium and Firm modes, Open mode adjust tuning range (1, 2, 3), rebound and air spring pressure Lever Actuated: Yes Remote Actuated: NoTechnologies: Factory Series: “Factory” says it all - feature-packed and designed to exceed the demands of our Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. Updated graphics. Dual Piston valve design improves both rebound and compression flow. Lightweight, one-piece EVOL air sleeve improves responsiveness and sensitivity.Buy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
This mountain bike (MTB) rear shock features a lightweight EVOL air spring, which offers fantastic responsiveness and sensitivity as you charge through the more demanding of terrain conditions. Fox Suspension has also equipped it with a Dual Piston valve design that improves both rebound and compression flow for a smoother ride. Part of the renowned Factory Series, this version has a genuine Kashima coating on its body and air sleeve, which offers enhanced lubrication and a harder wearing surface, resulting in increased shock smoothness and sensitivity on the trails. Factory Series MTB Rear Shock with DPS Damper Ready for wherever your next trail-riding adventure takes you, this MTB rear shock comes kitted out with a DPS damper to keep your ride under control. Its damper features three positions of adjustment, where you can choose from Open, Medium and Firm modes to tailor how you want it to respond to the terrain conditions. Fox Suspension has also equipped it with an Open mode adjust tuning range (1, 2, 3) as well as adjustable rebound and air spring pressure. This gives you everything you need to dial-in your ideal settings for rear suspension performance that matches your riding style as well as the terrain. Exceptional Bump Compliance Meets Exceptional Efficiency With a lightweight chassis, EVOL air spring, and dual piston damper with 3-position switch, the Fox Suspension Float DPS Factory Shock SV creates a pedal-friendly shock that soaks up the bumps and delivers pedal power to the ground with utmost efficiency. Technologies: Factory Series: “Factory” says it all – feature-packed and designed to exceed the demands of our Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. DPS damper with three positions - Open, Medium, Firm modes. Dual Piston valve design improves both rebound and compression flow. Lightweight, one-piece EVOL air sleeve improves responsiveness and sensitivity. Manufacturer's Part Numbers: 972-01-497 Black 6.5 x 1.5" 972-01-498 Black 7.25 x 1.75" 972-01-477 Black 7.875 x 2.0"
This trail-ready rear shock is well-equipped for the most demanding of terrain conditions. Part of Fox Suspension's prestigious Factory Series, this model is kitted out with proven technologies and is designed to exceed the demands of Factory-level riders. Adjustable Coil Spring Rear Shock Benefitting from Fox Suspension's finest technologies for modern mountain bike riding, this rear shock is equipped with a high-quality coil spring ready design and an updated damper. The updated X2 damper maintains a twin-tube architecture, employing a proven dual-shim stack main piston for improved damping and more precise tuning than ever before. Fox Suspension also added its patented Variable Valve Control (VVC) technology to the high-speed rebound (HSR) circuit, which allows for easy, external fine-tuning of your suspension performance. Just like GRIP2 forks, the X2 family of shocks also feature identical 8 clicks of adjustment on high-speed compression (HSC) and high-speed rebound (HSR). This allows you to make consistent adjustments between their front and rear suspension. Nothing sticks to the ground quite like a coil shock. With an entirely updated chassis and damper, enhanced tunability, smoother action, and a MCU bumper for progressivity and end-stroke control - the Fox Suspension DHX2 Factory 2Pos-Adj Shock is ready to race straight out of the gate. Please note: A coil spring is not included with this model but is available to purchase separately. Technologies: Factory Series: “Factory” says it all – feature-packed and designed to exceed the demands of Fox Suspension's Factory-level riders. What we sell is what they race. Updated Chassis: The outer body on the DHX2 features steel construction with finned inner tubes for reduced hysteresis. DHX2 features an updated low-friction hard chrome coating on the shaft with new seals designed to pair perfectly to the new shaft coating, reducing frictions and increasing seal life. Updated Damper: The updated X2 damper maintains a twin-tube architecture, employing a proven dual-shim stack main piston for improved damping and more precise tuning than ever before. Fox Suspension added its patented VVC technology to the HSR circuit. VVC is a proprietary variable valve technology that allows for easy, external fine-tuning of suspension performance. Just like GRIP2 forks, the X2 family of shocks also feature identical 8 clicks of adjustment on HSC and HSR. This allows the rider to make consistent adjustments between front and rear suspension. MCU Bumper: The updated MCU bumper is designed to allow for supple beginning and mid-stroke, seamlessly transitioning to a bottomless end-stroke. Independent Firm Mode Circuit: This version's 2-position switch operates on an independent circuit, resulting in a firmer lockout. Revised Spring Changes: The coil-sprung DHX2 now uses a full spring collar, held in place with a C-clip, and a new preload collar with indexed notches to allow for light preload without the collar backing off. Manufacturer's Part Numbers: 978-01-054 Black 8.5 x 2.5" 978-01-053 Black 7.875 x 2.0"
Fox Suspension DHX2 Factory 2-Position Adjust ShockFeaturing a coil spring ready design, an updated chassis and damper plus a high-flow main piston for precise and controlled handling, this trail-ready rear shock is well-equipped for the most demanding of terrain conditions. Part of Fox Suspension's prestigious Factory Series, this model is kitted out with proven technologies and is designed to exceed the demands of Factory-level riders.Adjustable Coil Spring Rear ShockBenefitting from Fox Suspension's finest technologies for modern mountain bike riding, this rear shock is equipped with a coil spring ready design and an updated damper. The updated X2 damper maintains a twin tube architecture, employing a proven dual-shim stack main piston for improved damping and more precise tuning than ever before. Fox Suspension also added its patented Variable Valve Control (VVC) technology to the high-speed rebound (HSR) circuit, which allows for easy, external fine-tuning of your suspension performance. Just like GRIP2 forks, the X2 family of shocks also feature identical 8 clicks of adjustment on high-speed compression (HSC) and high-speed rebound (HSR). This allows you to make consistent adjustments between their front and rear suspension. Nothing sticks to the ground quite like a coil shock. With an entirely updated chassis and damper, enhanced tunability, smoother action, and a MCU bumper for progressivity and end-stroke control - the Fox Suspension DHX2 Factory 2Pos-Adj Shock is ready to race straight out of the gate.Please note: A coil spring is not included with this model but is available to purchase separately.Features: Shaft Coating: Chromoly (CrMo) Steel Use: MTB Spring Type: Coil spring Adjustment Lever: 2-position Open/Firm lever (retains high and low speed compression adjustment) Adjustment Features: High and low speed compression, high and low speed rebound Variable Valve Control (VVC) Rebound: Yes Detents on Spring Collar: Yes Spring Included: No, available separatelyTechnologies: Factory Series: “Factory” says it all - feature-packed and designed to exceed the demands of Fox Suspension's Factory-level riders. What we sell is what they race. Updated Chassis: The outer body on the DHX2 features steel construction with finned inner tubes for reduced hysteresis. DHX2 features an updated low-friction hard chrome coating on the shaft with new seals designed to pair perfectly to the new shaft coating, reducing frictions and increasing seal life. Updated Damper: The updated X2 damper maintains a twin tube architecture, emplying a proven dual-shim stack main piston for improved damping and more precise tuning than ever before. Fox Suspension added its patented VVC technology to the HSR circuit. VVC is a proprietary variable valve technology that allows for easy, external fine-tuning of suspension performance. Just like GRIP2 forks, the X2 family of shocks also feature identical 8 clicks of adjustment on HSC and HSR. This allows the rider to make consistent adjustments between front and rear suspension. MCU Bumper: The updated MCU bumper is designed to allow for supple beginning and mid-stroke, seamlessly transitioning to a bottomless end-stroke. Independent Firm Mode Circuit: This version's 2-position switch operates on an independent circuit, resulting in a firmer lockout. Revised Spring Changes: The coil-sprung DHX2 now uses a full spring collar, held in place with a C-clip, and a new preload collar with indexed notches to allow for light preload without the collar backing off.Buy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Specifically developed for the demands of modern E-MTB riding, this suspension fork is equipped with hard-wearing anodised upper tubes for a fantastic balance of strength and durability as well as extra protection against corrosion during wetter rides. Its combination of a lightweight Float EVOL air spring and a RAIL damper smoothen out your ride, so you can stay in full control as you conquer your way from trail to trail. Benefitting from Boost axle spacing and 160mm to 230mm disc brake rotor compatibility, this model is designed prepared for fast and fun adventures, wherever your next ride takes you. AWL: Adventure Without Limits Designed to bring highly evolved, broadly tuneable, super capable, ultra-reliable suspension to the cycling SUV market. Whether you are racing the clock to fit in another lap, or riding further than you have ever before, AWL suspension is here to make every ride limitless. Race Pedigree Leveraging FOX’s extensive experience with building the world’s highest-performance off-road suspension systems, the AWL fork is based around the acclaimed FOX 34 chassis. Featuring lightweight but stiff 34mm stanchions and a precision cast magnesium lower, the AWL tracks precisely without any unwanted flex and ensures optimal long-term performance, regardless of the weather and dirt you plough through. Performance and adjustability are paramount thanks to our infinitely tuneable EVOL air spring and proven Rail damper. Externally adjustable rebound and compression damping are tool-free and easily accessible, while the Rail’s sealed damper system delivers exceptional performance, bomber reliability, and hassle-free maintenance. Everyday Adventure Ready AWL’s stout chassis is available in both 27.5” and 29” wheel sizes and is rigorously tested to withstand a 169kg total weight rating. Fender, rack and light mounts are integrated into the fork for optimal compatibility, durability and versatility. Adverse conditions, rocks and roots will no longer harm your zip tied fenders. The AWL also comes with a special mount for a soon to be available, next level safety feature. Designed to handle whatever you load it up with and track smoothly and precisely across whatever terrain you point it at, the AWL can unlock your bike’s electric potential, open up new landscapes, and bring adventure to your everyday ride. Technologies: E-SUV Optimised: The explosion of electric assist technology has radically altered the cycling landscape. Not only are dedicated mountain bikers exploring new terrain and carrying more momentum over bigger obstacles, but capabilities across the entire e-cycling continuum have ramped up massively. This has put a whole new set of performance – and safety – demands on bikes and their components. People are riding farther, faster, and hauling more gear across more varied terrain than ever before and they need proven, high-performance suspension that can handle this new range of needs. RAIL Damper: RAIL damper is a simplified version of Fox Suspension's renowned GRIP damper. It offers an unmatched ride feel combined with bombproof durability and easy-to-use on-the-fly adjustment ranging from wide open to fully locked out. Manufacturer's Part Numbers: 910-20-210 Black 29" QR110 100mm 51mm 910-21-045 Black 29" QR110 140mm 51mm 910-20-211 Black 27.5" QR110 120mm 44mm
Coming feature-packed and designed to exceed the demands of Fox Suspension's Factory-level riders, this model boasts a genuine Kashima coating for fantastic durability, amazingly smooth performance and an eye-catching finish that complements any ride. DPS Damper, EVOL Air Spring and Adjustments Engineered for the rigours of modern trail riding, this MTB rear shock comes well-equipped with proven technologies to enhance your ride. Its dual piston system (DPS) damper features three positions of adjustment that can be controlled using a lever to choose between Open, Medium and Firm riding modes. Fox Suspension has also kitted out this version with a one-piece EVOL air spring that improves responsiveness and sensitivity, while its range of adjustment features allow you to easily fine-tune its suspension performance. Coming complete with an open mode adjust tuning range (1, 2, 3), rebound and air spring pressure adjustments, the Fox Suspension Float DPS Factory 3Pos-Adj LV Shock is a great choice of upgrade for fine-tuning your rear suspension to match your riding style as well as the terrain conditions. Technologies: - Factory Series: “Factory” says it all – feature-packed and designed to exceed the demands of our Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. - Updated graphics. - Dual Piston valve design improves both rebound and compression flow. - Lightweight, one-piece EVOL air sleeve improves responsiveness and sensitivity.
Fox Suspension Float DPS Factory 3Pos-Adj LV ShockWell-equipped for conquering your way around your local trails and beyond, this Factory Series mountain bike (MTB) rear shock features a DPS damper, an EVOL air spring and a three-position lever for easy adjustability. Coming feature-packed and designed to exceed the demands of Fox Suspension's Factory-level riders, this model boasts a genuine Kashima coating for fantastic durability, amazingly smooth performance and an eye-catching finish that complements any ride.DPS Damper, EVOL Air Spring and AdjustmentsEngineered for the rigours of modern trail riding, this MTB rear shock comes well-equipped with proven technologies to enhance your ride. Its dual piston system (DPS) damper features three positions of adjustment that can be controlled using a lever to choose between Open, Medium and Firm riding modes. Fox Suspension has also kitted out this version with a one-piece EVOL air spring that improves responsiveness and sensitivity, while its range of adjustment features allow you to easily fine-tune its suspension performance. Coming complete with an open mode adjust tuning range (1, 2, 3), rebound and air spring pressure adjustments, the Fox Suspension Float DPS Factory 3Pos-Adj LV Shock is a great choice of upgrade for fine-tuning your rear suspension to match your riding style as well as the terrain conditions.Features: Body Finish: Genuine Kashima coating Air Sleeve Finish: Genuine Kashima coating Use: MTB Spring Type: EVOL Air spring Damper: DPS Adjustments: Three-position lever actuated Open, Medium and Firm modes, Open mode adjust tuning range (1, 2, 3), rebound and air spring pressure Lever Actuated: Yes Remote Actuated: NoTechnologies: Factory Series: “Factory” says it all - feature-packed and designed to exceed the demands of our Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. Updated graphics. Dual Piston valve design improves both rebound and compression flow. Lightweight, one-piece EVOL air sleeve improves responsiveness and sensitivity.Buy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
This Factory Series mountain bike (MTB) rear shock is built for long days on your local trails with your riding buddies as well as exploring new routes on your own adventures by providing coil performance for the trail and beyond. It features a hard-wearing chromoly (CrMo) steel shaft coating that has ultra-low friction properties and is highly durable as you tackle demanding terrain conditions on your ride. Packed with many of Fox Suspension's proven technologies, this model is also part of the renowned Factory Series family that's designed to exceed the demands of Factory-level riders. Coil Spring and Adjustments Ready for wherever your next trail ride leads you, this rear shock is kitted out with a coil spring ready design and a range of adjustment features to help you dial in your ideal settings. Fitted with an independent two-position lever, you'll benefit from being able to easy switch between open and firm modes to suit the terrain conditions. In addition, its low-speed compression and rebound adjustments make it simple to fine-tune its suspension performance to match your riding style for a more rider-tuned feel. Coil performance for the trail and beyond. Answering the call of riders seeking the ultimate in plush suspension, the Fox Suspension DHX Factory 2Pos-Adj Shock brings coil-sprung, magic-carpet, trail smoothing performance in a wide range of configurations to the trails and beyond. Technologies: Factory Series: “Factory” says it all – feature-packed and designed to exceed the demands of Fox Suspension's Factory-level riders. What we sell is what they race. Updated chassis and damper. High-flow main piston. Numbered Tool-free 12 position single-turn LSC (Low Speed Compression) adjuster. Independent firm mode circuit – 2 position adjuster. Optimised reservoir lengths per shock size. Hydraulic top out feature. Reduced damper noise. MCU bottom-out bumper. Single-turn rebound adjuster with a variety of access modes (Tool-free, 3mm hex (direct access), 2mm hex or similar (side access). Spring preload collar with detents and max / min number of clicks and direction arrow. Full diameter spring retainer with wire ring (like DHX2). Spring scuff guard on body (like DHX2). Manufacturer's Part Numbers: 978-01-029 Black 210x50mm Metric 978-01-031 Black 210x52.5mm Metric 978-01-033 Black 210x55mm Metric 978-01-035 Black 230x57.5mm Metric 978-01-037 Black 230x60mm Metric 978-01-039 Black 230x65mm Metric 978-01-041 Black 185x52.5mm Trunnion 978-01-043 Black 185x55mm Trunnion 978-01-045 Black 205x60mm Trunnion 978-01-047 Black 205x62.5mm Trunnion
Fox Suspension DHX Factory 2-Position Adjust ShockBuilt for long days on your local trails with your riding buddies as well as exploring new routes on your own adventures, this high-quality Factory Series mountain bike (MTB) rear shock delivers coil performance for the trail and beyond. It features a hard-wearing chromoly (CrMo) steel shaft coating that has ultra-low friction properties and is highly durable as you tackle demanding terrain conditions on your ride. Packed with many of Fox Suspension's proven technologies, this model is also part of the renowned Factory Series family that's designed to exceed the demands of Factory-level riders.Coil Spring Ready and AdjustmentsReady for wherever your next trail ride leads you, this rear shock is kitted out with a coil spring ready design and a range of adjustment features to help you dial in your ideal settings. Fitted with an independent two-position lever, you'll benefit from being able to easy switch between open and firm modes to suit the terrain conditions. In addition, its low-speed compression and rebound adjustments make it simple to fine-tune its suspension performance to match your riding style for a more rider-tuned feel.Coil performance for the trail and beyond. Answering the call of riders seeking the ultimate in plush suspension, the Fox Suspension DHX Factory 2Pos-Adj Shock brings coil-sprung, magic-carpet, trail smoothing performance in a wide range of configurations to the trails and beyond.Features: Shaft Coating: Chromoly (CrMo) Steel Use: MTB Spring Type: Coil spring Adjustment Lever: Independent two-position Open/Firm lever Adjustment Features: Low-speed compression and rebound Coil Spring Preload: Detents on spring collar Spring Included: Not included. Available separatelyTechnologies: Factory Series: “Factory” says it all - feature-packed and designed to exceed the demands of Fox Suspension's Factory-level riders. What we sell is what they race. Updated chassis and damper. High-flow main piston. Numbered Tool-free 12 position single-turn LSC (Low Speed Compression) adjuster. Independent firm mode circuit - 2 position adjuster. Optimised reservoir lengths per shock size. Hydraulic top out feature. Reduced damper noise. MCU bottom out bumper. Single-turn rebound adjuster with a variety of access modes (Tool-free, 3mm hex (direct access), 2mm hex or similar (side access). Spring preload collar with detents and max / min number of clicks and direction arrow. Full diameter spring retainer with wire ring (like DHX2). Spring scuff guard on body (like DHX2).Buy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fox Suspension DHX Factory 2-Position Adjust ShockBuilt for long days on your local trails with your riding buddies as well as exploring new routes on your own adventures, this high-quality Factory Series mountain bike (MTB) rear shock delivers coil performance for the trail and beyond. It features a hard-wearing chromoly (CrMo) steel shaft coating that has ultra-low friction properties and is highly durable as you tackle demanding terrain conditions on your ride. Packed with many of Fox Suspension's proven technologies, this model is also part of the renowned Factory Series family that's designed to exceed the demands of Factory-level riders.Coil Spring Ready and AdjustmentsReady for wherever your next trail ride leads you, this rear shock is kitted out with a coil spring ready design and a range of adjustment features to help you dial in your ideal settings. Fitted with an independent two-position lever, you'll benefit from being able to easy switch between open and firm modes to suit the terrain conditions. In addition, its low-speed compression and rebound adjustments make it simple to fine-tune its suspension performance to match your riding style for a more rider-tuned feel.Coil performance for the trail and beyond. Answering the call of riders seeking the ultimate in plush suspension, the Fox Suspension DHX Factory 2Pos-Adj Shock brings coil-sprung, magic-carpet, trail smoothing performance in a wide range of configurations to the trails and beyond.Features: Shaft Coating: Chromoly (CrMo) Steel Use: MTB Spring Type: Coil spring Adjustment Lever: Independent two-position Open/Firm lever Adjustment Features: Low-speed compression and rebound Coil Spring Preload: Detents on spring collar Spring Included: Not included. Available separatelyTechnologies: Factory Series: “Factory” says it all - feature-packed and designed to exceed the demands of Fox Suspension's Factory-level riders. What we sell is what they race. Updated chassis and damper. High-flow main piston. Numbered Tool-free 12 position single-turn LSC (Low Speed Compression) adjuster. Independent firm mode circuit - 2 position adjuster. Optimised reservoir lengths per shock size. Hydraulic top out feature. Reduced damper noise. MCU bottom out bumper. Single-turn rebound adjuster with a variety of access modes (Tool-free, 3mm hex (direct access), 2mm hex or similar (side access). Spring preload collar with detents and max / min number of clicks and direction arrow. Full diameter spring retainer with wire ring (like DHX2). Spring scuff guard on body (like DHX2).Buy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.