The SL is 25% lighter than our standard transfer post, making it the lightest mainstream dropper on the market. With lever options for drop bars, flat bars, and 2x front shifters, it's the perfect upgrade for Gravel riders and diehard xc racers who want the Performance of a dropper but not the extra heft. Levers sold separately. Features: NEW lightweight design. NEW Windows in lower post allow cable clamp/slack to be pulled from post side for compatibility with GRX-style dropper levers and minimises extra cable housing length. 2-position mechanical post that locks at the top and bottom only. Longer travel configurations offer exposed length of 290mm for taller riders. Shorter travel configurations offer shorter total length for smaller riders. Coil spring for consistent return performance. Internal routing only. 27.2, 30.9 and 31.6mm diameters. 50, 70, 75, and 100mm drop options. 70-85deg seat angles are supported. 7mm and 7x9 ‘Ob-round' saddle rails supported. 1x lever is Matchmaker, Shimano GRX, and I-SPEC EV compatible.
The hard charging do it all trail fork. Smoother, lighter, more tunable, and more capable than ever before; when it comes to a do-it-all trail fork the 34 is in a class of its own. Features ALL-NEW chassis. NEW air / oil channels. NEW arch shape offers improved head tube clearance with shorter rakes. NEW 58mm diameter crown. Updated EVOL air spring. Specification Wheel Size: 29 . Colours: Shiny Black / Shiny Orange. Travel: 130mm / 140mm. Offset: 44mm / 51mm. Damper: GRIP2. Axle to Crown: 554mm (140mm Travel). Max Tyre Size: 29 x 2.60 . Rotor Size: 180-230mm. Steertube: 1.5 Taper. Axle Options: 15 x 110 QR / Kabolt 110. Uppertube Finish: Kashima. Starting Weight: 1698g.
The all-new 36. The new enduro fork standard is anything but standard. With all new design inside-and-out, plus an unmatched combination of ride quality, tunability, stiffness, weight, and alignment - we took the award-winning, EWS favorite and made it even better. NEW Crown - Lighter by 20 grams, while increasing steerer-tube overlap at the CSU, the new crown design improves durability while our engineering maintains stiffness and drops weight. Axle - Kabolt, a lightweight bolt-on floating axle to shave grams and increase torsional stiffness via a sleeveless, single-sided pinch bolt design. Lower Leg Bypass Channels - Increasing air volume within the lower legs reduces the amount of additional unintended pressure ramping. Lower leg bath oil also circulates to the upper reaches of the legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel. Lower Leg Bleeders - Allows for atmospheric pressure equalization for better fork performance, allowing full travel to be achieved and increasing small bump sensitivity and responsiveness. Lower Leg Arch - Our new lower leg design pulls out all the stops, shaving every possible gram while making sure not to compromise stiffness or strength requirements of modern enduro and gravity-style riding. GRIP2 - Unparalleled ride quality and ultra-precise adjustability. Allows for external fine-tuning of suspension performance thanks to our patented Variable Valve Control (VVC) technology. Float EVOL - Optimizes small bump sensitivity by increasing negative air spring volume. Its linear spring curve delivers plushness off the top, extra mid-stroke support, and more tunable bottom-out progression. Specifications: Damper: GRIP2 w/ dual VVC (Variable Valve Control). Travel: 140 - 160mm. Offset Options: 44mm. 51mm. Wheel Size: 27.5 & 29 . Axle: 15QR x 110mm Boost. Steerer: 1.5 Tapered. Colour: Gloss Black. Upper leg finish: Genuine Kashima Coat.
Performance Elite Transfer Posts retain the same internals, diameter options, drop options, shortened stack heights, new patent-pending head design and proven internals as the Factory Series but have a black anodized upper. Sizes: Diameter Sizes - 30.9/31.6mm Metric Sizes - 100mm/125mm/150mm/175mm Routing - Internal Only Lower Coating - Powdercoat Black Upper Coating - Black Anodized Specs and Family Features: Patent-pending clamp design dramatically reduces stack height Proven Transfer internals with even easier serviceability than 2020 model 25g lighter than 2020 Transfer NEW lightweight under-bar 1x lever design – or existing 2x lever - Purchased separately Updated design Reduced overall length and insertion depth: 175mm, 30.6mm shorter than 2020 Transfer, 8.6mm insertion depth reduction 150mm, 38.7mm shorter than 2020 Transfer, 15.5mm insertion depth reduction 125mm, 43.5mm shorter than 2020 Transfer, 20.3mm insertion depth reduction 100mm, 48.4mm shorter than 2020 Transfer, 25.2mm insertion depth reduction
Built around a dual design, this lockout lever can be mounted on both sides of your handlebar for fast and reliable operation. Specifically designed for use with Fox racing forks and rear shocks which feature CTD settings from 2014 onwards.
This MTB dropper seatpost features a rock-solid aluminium construction with an anodised finish, making it more than capable of handling the toughest of rides in all-weather conditions. Fox Suspension has also equipped this model with a patented saddle clamp design that reduces its overall weight.
This MTB dropper seatpost features a hard-wearing alloy construction, which makes it more than capable of handling all the abuse that's associated with trail-riding. Fox Suspension has also equipped this Factory Series model with a genuine Kashima coating, which offers exceptional smooth performance and a stunning finish. Coming complete with Fox's patented saddle clamp design, this version provides a secure hold and a reduced overall weight.
Designed to minimise friction, increase wear and improve the overall performance of your front fork, this pack of seals is an excellent addition to your fork's air spring. Manufacturer Part Numbers: Black n/a n/a: 803-00-963
Designed to reduce friction and enhance the overall performance of your Fox 36 fork, this Fox low friction seal kit is perfect for use as spare or replacement set for keeping your front suspension in check. Easy to install, this kit also increases the durability of your forks and prevents moisture from getting into your tubes. Manufacturer Part Numbers: Black 36mm Option: 803-00-933 Black 34mm: Option 803-00-945 Black 40mm: Option 803-00-946 Black 32mm: Option 803-00-944
This Fox Float DPX2 Factory MTB shock features a completely revised base valve design with 10 clicks of compression adjustability that's combined with an EVOL air sleeve for superior responsiveness and sensitivity. Coming complete with a stunning genuine Kashima coating and updated graphics, this is a perfect upgrade for smoother and more reliable performance. Technologies: Float DPX2 Damper: X2 small bump sensitivity meets DPS lightweight and simplicity. Three-position lever with adjustable Open Mode offers 10 clicks to fine-tune compression. Recirculating oil damper design for more control. EVOL Air Sleeve: Lightweight, one-piece EVOL air sleeve improves responsiveness and sensitivity. Manufacturer Part Numbers: 190mm, 45mm Stroke: 973-01-314 210mm, 50mm Stroke: 973-01-315 210mm, 52.5mm Stroke: 973-01-316 210mm, 55mm Stroke: 973-01-317 230mm, 65mm Stroke: 973-01-312 230mm, 60mm Stroke: 973-01-313 185mm, 44mm Stroke: 973-01-318 190mm, 50mm Stroke: 973-01-304 200mm, 50mm Stroke: 973-01-305 200mm, 57mm Stroke: 973-01-306 215mm, 65mm Stroke: 973-01-307
Part of Fox Suspension's renowned Factory Series, this mountain bike (MTB) rear shock is equipped with a stunning genuine Kashima coating that offers slippery smooth performance, increased durability on the more demanding of terrains, and also complements your ride with its eye-catching finish. Adjustable Rear Shock with Variable Valve Control (VVC) Coming feature-packed with a design that's intended to exceed the demands of Fox Suspension's Factory-level riders, this rear shock is kitted out with a two-position lever. Developed for ease of use, its lever makes it simple to switch between open and firm modes to suit the terrain or course conditions on your ride. Another highlight is its range of adjustment features that include high and low-speed compression as well as high and low-speed rebound. This version is also equipped with Variable Valve Control (VVC) for improved high-speed rebound tunability. As a result, you'll be able to dial in your ideal settings to match your riding style and enjoy more rider-tuned rear suspension performance. Technologies: Factory Series: “Factory” says it all – feature-packed and designed to exceed the demands of our Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. Updated Damper: The Float X2's 4-way adjustable, twin-tube architecture now features patented Variable Valve Control (VVC) technology on the high-speed rebound circuit for unrivalled external fine-tuning. Updated compression ratios and a MCU bumper deliver improved progressivity and bottom-out control with fewer volume spacers. Independent Firm Mode Circuit: A 2-position switch operates on an independent circuit, providing a notably firmer lockout than before, allowing for efficient climbing and wide-open descending. Updated Chassis: Float X2's entirely revised chassis features an ultra-low friction hard chrome damper shaft, updated low-friction bushings and seals, and genuine Kashima coated outer body for smoother performance than ever before. High-flow main piston. Improved bearing ratio for metric sizes. Increased control and decreased harshness via linear damping. Reduced length reservoir for better fit on more frames. Finned inner body for improved structural rigidity and reduced hysteresis. Matching 8-click HSC and HSR adjustment on GRIP2 forks and X2 shocks. Updated compression ratios, 300psi max.
This Factory Series mountain bike (MTB) rear shock is built for long days on your local trails with your riding buddies as well as exploring new routes on your own adventures by providing coil performance for the trail and beyond. It features a hard-wearing chromoly (CrMo) steel shaft coating that has ultra-low friction properties and is highly durable as you tackle demanding terrain conditions on your ride. Packed with many of Fox Suspension's proven technologies, this model is also part of the renowned Factory Series family that's designed to exceed the demands of Factory-level riders. Coil Spring and Adjustments Ready for wherever your next trail ride leads you, this rear shock is kitted out with a coil spring ready design and a range of adjustment features to help you dial in your ideal settings. Fitted with an independent two-position lever, you'll benefit from being able to easy switch between open and firm modes to suit the terrain conditions. In addition, its low-speed compression and rebound adjustments make it simple to fine-tune its suspension performance to match your riding style for a more rider-tuned feel. Coil performance for the trail and beyond. Answering the call of riders seeking the ultimate in plush suspension, the Fox Suspension DHX Factory 2Pos-Adj Shock brings coil-sprung, magic-carpet, trail smoothing performance in a wide range of configurations to the trails and beyond. Technologies: Factory Series: “Factory” says it all – feature-packed and designed to exceed the demands of Fox Suspension's Factory-level riders. What we sell is what they race. Updated chassis and damper. High-flow main piston. Numbered Tool-free 12 position single-turn LSC (Low Speed Compression) adjuster. Independent firm mode circuit – 2 position adjuster. Optimised reservoir lengths per shock size. Hydraulic top out feature. Reduced damper noise. MCU bottom-out bumper. Single-turn rebound adjuster with a variety of access modes (Tool-free, 3mm hex (direct access), 2mm hex or similar (side access). Spring preload collar with detents and max / min number of clicks and direction arrow. Full diameter spring retainer with wire ring (like DHX2). Spring scuff guard on body (like DHX2). Manufacturer's Part Numbers: 978-01-029 Black 210x50mm Metric 978-01-031 Black 210x52.5mm Metric 978-01-033 Black 210x55mm Metric 978-01-035 Black 230x57.5mm Metric 978-01-037 Black 230x60mm Metric 978-01-039 Black 230x65mm Metric 978-01-041 Black 185x52.5mm Trunnion 978-01-043 Black 185x55mm Trunnion 978-01-045 Black 205x60mm Trunnion 978-01-047 Black 205x62.5mm Trunnion
Designed to exceed the demands of Fox Suspension's Factory-level riders, this Factory Series mountain bike (MTB) rear shock is kitted out with a genuine Kashima coating that provides increased durability, silky smooth operation and an eye-catching finish that complements any ride. EVOL Air Spring and Adjustments The Float DPS helps you make perfect turns without cutting corners by using a dual-piston system that pairs exceptional bump compliance with efficiency to conserve energy for when you need it most. It's also kitted out with a one-piece EVOL air spring that improves responsiveness and sensitivity, while its range of adjustment features allow you to easily fine-tune its suspension performance. Thanks to its remote actuation, you can effortlessly switch between open and firm modes to match the terrain conditions. This model is also equipped with adjustable rebound and air spring pressure, so you can dial-in your ideal settings for a more rider-tuned feel. The Fox Suspension Float DPS Factory Remote Shock's lightweight chassis, EVOL air spring, and dual-piston (DPS) damper create a pedal-friendly shock that soaks up the bumps and delivers pedal power to the ground with utmost efficiency. Technologies: Factory Series: “Factory” says it all – feature-packed and designed to exceed the demands of our Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. Updated graphics. Dual Piston valve design improves both rebound and compression flow. Lightweight, one-piece EVOL air sleeve improves responsiveness and sensitivity. Manufacturer's Part Numbers: 972-01-509 Black 6.5x1.5" 972-01-512 Black 7.25x1.75" 972-01-508 Black 7.5x2.0"
This mountain bike (MTB) rear shock is part of Fox Suspension's Performance Series and features a hard-wearing anodised finish for excellent durability and corrosion resistance on your ride. This model is also equipped with a lightweight one-piece EVOL air spring, which ensures you'll benefit from its improved responsiveness and sensitivity as it absorbs the sudden knocks and bumps associated with trail-riding. DPS Damper and Adjustments This trail-ready rear shock is kitted out with a dual-piston system (DPS) damper that pairs exceptional bump compliance with efficiency, helping you conserve energy for when you need it most. Its damper uses a three-position lever to allow you to easily switch between its open, medium and firm modes. Fox Suspension has also equipped this model with an open mode adjust tuning range (1, 2, 3), rebound and air spring pressure adjustments, so you can fine-tune your rear suspension to fit in with your riding style as well as the terrain conditions. Technologies: DPS damper with three positions - Open, Medium, Firm modes. Dual Piston valve design improves both rebound and compression flow. Lightweight, one-piece EVOL air sleeve improves responsiveness and sensitivity. Manufacturer's Part Numbers: 972-01-489 Black 7.5x2.0" 972-01-490 Black 7.875x2.0" 972-01-491 Black 7.875x2.25"
Featuring a Super Light Steel (SLS) construction, this mountain bike (MTB) rear shock spring is lighter than titanium springs and more affordable. It's equipped with a proprietary surface treatment and stress relief process that removes residual stresses from the spring, allowing it to withstand higher stresses. Each spring is also optimised by using a smaller wire diameter and fewer coils, creating a lighter spring. Compatible with Fox DHX2 and Van RC rear shocks from 2016 onwards. All SLS springs are orange and are marked with their spring rate in lbs/in (in 25lb increments) and the maximum travel of the shock that they are designed to be paired with. Please note: This model is intended for Fox DHX2 and Van RC rear shocks from 2016 onwards. If you have a rear shock that's from before 2016, an SLS spring retainer is required (available separately). Manufacturer's Part Numbers: 033-22-030 Orange 350lb 033-22-031 Orange 375lb 033-22-032 Orange 400lb 033-22-033 Orange 425lb 033-22-034 Orange 450lb 033-22-035 Orange 475lb 033-22-036 Orange 500lb 033-22-037 Orange 550lb 033-22-038 Orange 600lb
Coming kitted out with a Super Light Steel (SLS) construction, this mountain bike (MTB) rear shock spring is lighter than titanium springs and more affordable. It's equipped with a proprietary surface treatment and stress relief process that removes residual stresses from the spring, allowing it to withstand higher stresses. Each spring is also optimised by using a smaller wire diameter and fewer coils, creating a lighter spring. Compatible with Fox DHX2 and Van RC rear shocks from 2016 onwards. All SLS springs are orange and are marked with their spring rate in lbs/in (in 25lb increments) and the maximum travel of the shock that they are designed to be paired with. Please note: This model is intended for Fox DHX2 and Van RC rear shocks from 2016 onwards. If you have a rear shock that's from before 2016, an SLS spring retainer is required (available separately). Manufacturer's Part Numbers: 033-22-046 Orange 375lb 033-22-047 Orange 400lb 033-22-048 Orange 425lb 033-22-049 Orange 450lb 033-22-050 Orange 475lb 033-22-051 Orange 500lb 033-22-063 Orange 525lb 033-22-052 Orange 550lb
This mountain bike (MTB) rear shock spring features a Super Light Steel (SLS) construction, which is lighter than titanium springs and more affordable. It's equipped with a proprietary surface treatment and stress relief process that removes residual stresses from the spring, allowing it to withstand higher stresses. Each spring is also optimised by using a smaller wire diameter and fewer coils, creating a lighter spring. Compatible with Fox DHX2 and Van RC rear shocks from 2016 onwards. All SLS springs are orange and are marked with their spring rate in lbs/in (in 25lb increments) and the maximum travel of the shock that they are designed to be paired with. Please note: This model is intended for Fox DHX2 and Van RC rear shocks from 2016 onwards. If you have a rear shock that's from before 2016, an SLS spring retainer is required (available separately). Manufacturer's Part Numbers: 033-22-007 Orange 475lb 033-22-008 Orange 500lb 033-22-009 Orange 550lb 033-22-010 Orange 600lb 033-22-002 Orange 350lb 033-22-003 Orange 375lb 033-22-004 Orange 400lb 033-22-005 Orange 425lb 033-22-006 Orange 450lb
Ready to conquer every trail-riding adventure, this mountain bike (MTB) rear shock spring features a hard-wearing steel construction for excellent strength and durability on your ride. All standard steel springs are black and are marked with their spring rate in lbs/in (in 50lb increments) and the total travel of the spring itself. Standard black springs should only be paired with shocks having less travel than the travel marked on the spring itself. Manufacturer's Part Numbers: 039-03-019 Black 650lb 1.385x4.954" 039-03-100 Black 700lb 1.375x5.200" 039-03-101 Black 800lb 1.375x5.280"
Part of the brand's renowned Factory Series, this mountain bike (MTB) rear shock is engineered for maximum rear-end suspension performance on the most demanding of trail conditions. It features a wide range of adjustment features including an independent two-position Open/Firm lever, which allows you to easily dial-in your ideal settings to match your riding style as well as the terrain. Fox Suspension has also kitted out this model with 16 clicks of Low Speed Rebound and 11 clicks of Low Speed Compression, so you can benefit from a more rider-tuned feel with high-performance damping wherever your ride takes you. Coming complete with a genuine Kashima coating, this high-quality Factory Series version delivers enhanced lubrication and a harder wearing surface, which results in increased shock smoothness and sensitivity on the trails. Heavyweight Features in a Lightweight Package Designed specifically to meet the demands of aggressive trail riders, the Float X combines sophisticated damping and fade-free performance with incredible light weight and outstanding structural integrity. Technologies: Factory Series: “Factory” says it all – feature-packed and designed to exceed the demands of Factory-level riders. What we sell is what they race. - Updated chassis and damper. - High-flow main piston. - Air seal package. - Volume spacers with smaller increments. - MCU bottom out bumper. - Numbered tool-free 12 position single-turn LSC (Low Speed Compression) adjuster. - Independent firm mode circuit – Clockable 2 position adjuster. - Increased rebound adjuster range (over DPX2). - Optimized reservoir lengths per shock size. - Hydraulic top out feature. - Reduced damper noise. - Larger air sleeve bore reduces average rider pressure by 40 psi vs. DPX2. - Bearing hardware compatible both sides. - Air valve location offers improved frame fitment and pump access. Manufacturer's Part Numbers: 979-01-053 230 x 65mm Metric 979-01-054 185 x 52.5mm Trunnion 979-01-056 185 x 55mm Trunnion 979-01-058 205 x 60mm Trunnion 979-01-059 205 x 62.5mm Trunnion 979-01-041 190 x 45mm Metric 979-01-043 210 x 50mm Metric 979-01-045 210 x 52.5mm Metric 979-01-047 210 x 55mm Metric 979-01-049 230 x 57.5mm Metric 979-01-051 230 x 60mm Metric
Part of the Performance Elite series, this high-quality dropper seatpost is equipped with a black anodised upper coating that provides an additional level of protection against wear and corrosion wherever your adventure takes you. Fox Suspension has also kitted it out with a powdercoat lower coating that allows it to handle all of challenges associated with all-day epics on your favourite trails and day-long adventures on your gravel bike. Also benefitting from internal cable routing, this versatile model provides a sleek look on your ride while also minimising any risk of damage from dirt or debris. Super Light Done Right Meet the Transfer SL. At 128 grams (25%) lighter than the regular Transfer post, Fox Suspension has branded it as the lightest mainstream dropper post on the market. Period. With lever options for flat bars, drop bars, and 1x and 2x drivetrains it (finally) brings the word “shred” into the super-lightweight cross country (XC) and gravel conversation. Performance Elite Series Dropper Seatpost Performance Elite Transfer Posts retain the same internals, diameter options, drop options, shortened stack heights, patent-pending head design and proven internals as the Factory Series but they feature a black anodised upper instead of a genuine Kashima coating. This Performance Elite series model's anodised upper is ideal for riders who want increased strength and durability on their ride, while also benefitting from its lightweight and responsive actuation. Technologies: - Updated lightweight design. - Updated Windows in lower post allow cable clamp/slack to be pulled from post side for compatibility with GRX-style dropper levers and minimises extra cable housing length. - 2-position mechanical post that locks at the top and bottom only. - Longer travel configurations offer exposed length of 290mm for taller riders. - Shorter travel configurations offer shorter total length for smaller riders. - Coil spring for consistent return performance. - Internal routing only. - 27.2, 30.9 and 31.6mm diameter options to choose from. - 50, 70, 75, and 100mm drop options to choose from. - 70-85deg seat angles are supported. - 7mm and 7x9 saddle rails supported. - 1x lever is Matchmaker, Shimano GRX, and I-SPEC EV compatible (levers available separately). Manufacturer's Part Numbers: 925-01-203 350mm 27.2 x 50mm 925-01-202 370mm 27.2 x 70mm 925-01-210 355mm 30.9 x 75mm 925-01-208 380mm 30.9 x 100mm 925-01-211 355mm 31.6 x 75mm 925-01-209 380mm 31.6 x 100mm