Fox Suspension 36 Float Factory Fit4 ForkThis race-ready enduro suspension fork features a revised design both inside and out for smooth and reliable front end suspension performance. No stranger to winning awards, accolades and Enduro World Series (EWS) races, this model is prepared for everything from big backcountry routes to the EWS circuit. Fox Suspension has equipped it with Boost axle spacing, making it ideal for modern enduro thanks to its extra stiffness. It also offers a wide range of adjustability from its lightweight Float EVOL air spring and its FIT4 damper that enable you to easily set it up to match your riding style. Part of the brand's renowned Factory Series, it includes the best-of-the-best technologies and it comes complete with a genuine Kashima coating on its upper tubes for slippery smooth, ultra-durable performance.Enduro Fork with Float EVOL Air SpringEVOL technology increases negative air spring volume, optimising small bump sensitivity. EVOL's linear spring curve delivers plushness off the top, extra mid-stroke support, and more tuneable bottom-out progression. The benefits of EVOL are further enhanced by Fox Suspension's Lower Leg channels and Bleeders, which both function to reduce air pressure captured in the lower legs, allowing the EVOL air spring to operate freely without unintended interference.FIT4 DamperIn its fourth generation, Fox Suspension's patented FIT4 closed cartridge system provides three on-the-fly compression damping positions (Open, Medium, and Firm) to adapt to varying trail conditions. Factory Series forks feature an additional 22 clicks of low-speed compression adjust in the Open mode, allowing riders to fine-tune their exact damping preferences.Features: Upper Tubes Finish: Genuine Kashima Coat Use: MTB Axle: 15QRx110mm Boost Steerer Diameter: 1.5" tapered Air Spring: Float EVOL Damper: FIT4 (Quick on-the-fly 3-position adjust) Brake Rotor Compatibility: 180mm direct Post Mount, up to 230mm compatible Starting Weight: 1965gTechnologies: Factory Series: “Factory” says it all - feature-packed and designed to exceed the demands of Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. Adjustments: Three on-the-fly compression damping positions Open, Medium, Firm. Additional low-speed compression (Open mode adjust) 22 clicks. Low-speed rebound 10 clicks. Floating Axle: Floating axles might look similar to other axles, but in fact they offer a distinct performance advantage due to their unique ability to match the exact width of the fork's wheel mounting surface precisely to the front hub flange spacing, thus creating perfect chassis alignment and eliminating unwanted friction between the upper and lower fork legs. Floating axles provide much smoother suspension movement throughout the entire range of the fork's travel, notably improving sensitivity and overall ride quality. The all-new 36 and 38 come equipped with a new quick-release lever operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release. With this system, spacing is locked in via a floating sleeve, allowing repeated front wheel removal and reinstallation while maintaining perfect fork alignment. Floating sleeve positioning comes preset from the factory so if you are unsure of how to operate the floating axle system or simply don't want to bother with it, you can just install the front wheel and get on with your ride. Lower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel. Bleeders: Fox Suspension's lower leg bleeders allow for atmospheric pressure equalization at the simple press of a button. Pressure build-up in the lower legs dramatically decreases fork performance, preventing full travel from being achieved, and diminishing small bump sensitivity and responsiveness. Lower Leg Arch: Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. Fox Suspension's lower leg design pulls out all the stops, shaving every possible gram while making sure not to compromise stiffness or strength requirements of modern enduro and gravity style riding. Modern frame designs and geometry trends require modern suspension design solutions. The arch design of the all-new 36, 38, and 40 is designed to pair perfectly with modern Enduro and Downhill bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension's new arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modeling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material. Increased crown diameter to match modern frame shape profiles. Optional mudguard with sturdy 4-point direct-mount attachment protects upper tubes and dust wipers from dirt and debris. (available separately).Manufacturer's Part Numbers: 910-20-243 Black 27.5" QR110 160mm 44mm 910-20-238 Black 29" QR110 150mm 51mm 910-20-237 Black 29" QR110 150mm 44mmBuy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fox Suspension 36 Float Factory Grip 2 ForkThis mountain bike (MTB) suspension fork is engineered for the demands of modern trail riding. It's part of Fox Suspension's renowned Factory Series, which means that it comes feature-packed and is designed to exceed the demands of Factory-level riders. Another highlight is its genuine Kashima coating on its upper tubes that provides slippery smooth and ultra-durable performance as you carve your way around the mountain. Boasting a wide range of adjustments from its Float EVOL air spring and GRIP2 damper with dual Variable Valve Control (VVC), this model makes it simple to dial in your ideal settings for smooth shock absorption and control on your ride.MTB Fork with Float EVOL Air SpringEVOL technology increases negative air spring volume, optimising small bump sensitivity. EVOL's linear spring curve delivers plushness off the top, extra mid-stroke support, and more tuneable bottom-out progression. The benefits of EVOL are further enhanced by Fox Suspension's Lower Leg channels and Bleeders, which both function to reduce air pressure captured in the lower legs, allowing the EVOL air spring to operate freely without unintended interference.GRIP2 DamperFox Suspension's GRIP2 damper is the benchmark for unparalleled ride quality and ultra-precise adjustability. GRIP2 includes the brand's patented Variable Valve Control (VVC) technology which allows for external fine-tuning of suspension performance. GRIP2 achieves with the twist of a knob what typically requires the time-consuming and complicated task of completely disassembling and reassembling the fork.Features: Upper Tube Finish: Genuine Kashima Coat Use: MTB Axle: 15QRx110mm Air Spring: Float EVOL Damper: GRIP2 with dual Variable Valve Control (VVC) Adjustments: High-speed compression (with VVC) 8 clicks. Low-speed compression 16 clicks. High-speed rebound (with VVC) 8 clicks. Low-speed rebound 16 clicks Steerer Diameter: 1.5" tapered Compatible Rotor Size: 180mm direct Post Mount, Up to 230mm compatible Starting Weight: 1965gTechnologies: Factory Series: “Factory” says it all - feature-packed and designed to exceed the demands of Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. Adjustments: High-speed compression (with VVC) 8 clicks. Low-speed compression 16 clicks. High-speed rebound (with VVC) 8 clicks. Low-speed rebound 16 clicks. Floating Axle: Floating axles might look similar to other axles, but in fact they offer a distinct performance advantage due to their unique ability to match the exact width of the fork's wheel mounting surface precisely to the front hub flange spacing, thus creating perfect chassis alignment and eliminating unwanted friction between the upper and lower fork legs. Floating axles provide much smoother suspension movement throughout the entire range of the fork's travel, notably improving sensitivity and overall ride quality. The all-new 36 and 38 come equipped with a new quick-release lever operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release. With this system, spacing is locked in via a floating sleeve, allowing repeated front wheel removal and reinstallation while maintaining perfect fork alignment. Floating sleeve positioning comes preset from the factory so if you are unsure of how to operate the floating axle system or simply don't want to bother with it, you can just install the front wheel and get on with your ride. Lower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension's lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel. Bleeders: Fox Suspension's lower leg bleeders allow for atmospheric pressure equalization at the simple press of a button. Pressure build-up in the lower legs dramatically decreases fork performance, preventing full travel from being achieved, and diminishing small bump sensitivity and responsiveness. Lower Leg Arch: Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. Fox Suspension's all-new lower leg design pulls out all the stops, shaving every possible gram while making sure not to compromise stiffness or strength requirements of modern enduro and gravity style riding. Modern frame designs and geometry trends require modern suspension design solutions. The arch design of the all-new 36, 38, and 40 is designed to pair perfectly with modern Enduro and Downhill bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension's new arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modeling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material.Manufacturer's Part Numbers@ 910-20-235 Black 29" QR110 160mm 51mm 910-20-234 Orange 29" QR110 160mm 44mm 910-20-233 Black 29" QR110 160mm 44mm 910-20-242 Black 27.5" QR110 160mm 44mm 910-20-241 Black 27.5" QR110 160mm 37mm 910-20-240 Orange 27.5" QR110 160mm 44mm 910-20-236 Black 29" QR110 150mm 44mmBuy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fox Suspension 32 Float SC Factory Fit4 Remote ForkThis mountain bike (MTB) suspension fork is specifically tailored for the rigours of cross country racing and features Fox Suspension's prestigious Step Cast chassis. Its Step Cast design offers a pioneering lower leg shape that isn't just for looks, its narrow stance and stepped design saves weight, decreases frontal area, and provides clearance for the spokes and brake rotor. Ready for the most demanding of cross country (XC) racing situations, this version is also kitted out with a lightweight Float EVOL air spring and a FIT4 2-position remote actuated damper (remote sold separately) for easy adjustment and fine-tuning to match your riding style. Part of the brand's renowned Factory Series, this model comes complete with a genuine Kashima finish on its upper tubes for slippery smooth, ultra-durable performance as you race for the podium.FIT4 2-Position RemoteIn its fourth generation, Fox Suspension's patented FIT4 closed cartridge system provides two on-the-fly compression damping positions (Open and Firm) to adapt to varying trail conditions. Factory Series forks feature an additional 22 clicks of low-speed compression adjust in the Open mode, allowing riders to fine-tune their exact damping preferences.Lightweight Float Air Spring SystemThis model's Float EVOL air spring automatically equalises the positive and negative air chambers for increased sensitivity and traction, regardless of the air pressure setting. Riders can fine-tune the characteristics of the positive air spring by using volume spacers.Please note: A remote is sold separately for this product.Features: Upper Tubes Finish: Genuine Kashima Coat Use: Cross Country (XC) Axle: Kabolt (multiple options available) Steerer Diameter: 1.5" tapered Air Spring: Float EVOL Damper: FIT4 2-Position Remote with adjustment Remote Included: No, available separately Travel: 100mm Brake Rotor Compatibility: 160mm Direct Post Mount (27.5" Option up to 180mm compatible; 29" Option up to 203mm compatible) Starting Weight: 1387gTechnologies: Factory Series: “Factory” says it all - feature-packed and designed to exceed the demands of Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. Adjustments: Two on-the-fly compression damping positions Open, Firm. Additional low-speed compression (Open mode adjust) 22 clicks. Low-speed rebound 10 clicks. Lightweight FIT4 Closed Cartridge System: Lightweight version of Fox Suspension's patented FIT4 closed cartridge system. The weight-optimised design uses a detailed aluminium piston, intricate material removal and consolidated parts design to make it lighter. Narrow Chassis: The chassis is 10mm narrower than the typical 32 design. Shorter Upper Tube Length: The shorter upper tube length raises the floor of the magnesium lower leg, creating a hollow lower section and a lighter overall system.Manufacturer's Part Numbers: 910-21-041 Black 27.5" KB100 100mm 44mm 910-21-040 Black 27.5" KB110 100mm 44mm 910-21-038 Black 29" KB110 100mm 44mm 910-21-036 Black 29" KB110 100mm 51mm 910-21-035 Orange 29" KB110 100mm 44mm 910-21-034 Orange 29" KB110 100mm 51mm 910-21-039 Black 29" KB100 100mm 44mm 910-21-037 Black 29" KB100 100mm 51mmBuy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fox Suspension Float DPX2 Factory 3Pos-Adjust LV ShockBringing together the ride quality and tunability of Fox Suspension’s Float X2 and the lightweight simplicity of its dual piston system (DPS), the DPX2 Factory 3 Position Adjustable LV Rear Shock is one of its most advanced trail models. It features a completely revised base valve design with 10 clicks of compression adjustability that's combined with an EVOL air sleeve for superior responsiveness and sensitivity. Coming complete with a stunning genuine Kashima coating and updated graphics, this is a perfect upgrade to add smoother and more reliable performance to your trail-ready mountain bike (MTB).Features: Finish: Genuine Kashima Coat with updated graphics Mount Type: Eyelets Compatibility: Frames with standard eyelet mounts Use: All-Mountain (AM), Trail Damper: Float DPX2 with 3-position lever with adjustable open mode offers 10 clicks to fine-tune compression, recirculating oil damper design for more control Air Sleeve: One-piece extra volume (EVOL) air sleeve Volume: Large volume Sizes: Imperial and metric sizes Shock Adjustment: Lever on shock or remote (optional remote sold separately) Full Lockout: No Shock Pump Included: No Mounting Kit Included: No (mounting hardware is bike frame specific)Manufacturer's Part Number: 190mm, 45mm Stroke: 973-01-314; 210mm, 50mm Stroke: 973-01-315; 210mm, 52.5mm Stroke: 973-01-316; 210mm, 55mm Stroke: 973-01-317; 230mm, 65mm Stroke: 973-01-312; 230mm, 60mm Stroke: 973-01-313; 185mm, 44mm Stroke: 973-01-318; 190mm, 50mm Stroke: 973-01-304; 200mm, 50mm Stroke: 973-01-305; 200mm, 57mm Stroke: 973-01-306; 215mm, 65mm Stroke: 973-01-307Technologies: Float DPX2 Damper: X2 small bump sensitivity meets DPS lightweight and simplicity. A three-position lever with adjustable open mode offers 10 clicks to fine-tune compression. There's also a recirculating oil damper design for more control EVOL Air Sleeve: This lightweight, one-piece EVOL air sleeve improves responsiveness and sensitivityBuy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fox Suspension Float DPX2 Factory 3Pos-Adjust LV ShockBringing together the ride quality and tunability of Fox Suspension’s Float X2 and the lightweight simplicity of its dual piston system (DPS), the DPX2 Factory 3 Position Adjustable LV Rear Shock is one of its most advanced trail models. It features a completely revised base valve design with 10 clicks of compression adjustability that's combined with an EVOL air sleeve for superior responsiveness and sensitivity. Coming complete with a stunning genuine Kashima coating and updated graphics, this is a perfect upgrade to add smoother and more reliable performance to your trail-ready mountain bike (MTB).Features: Finish: Genuine Kashima Coat with updated graphics Mount Type: Eyelets Compatibility: Frames with standard eyelet mounts Use: All-Mountain (AM), Trail Damper: Float DPX2 with 3-position lever with adjustable open mode offers 10 clicks to fine-tune compression, recirculating oil damper design for more control Air Sleeve: One-piece extra volume (EVOL) air sleeve Volume: Large volume Sizes: Imperial and metric sizes Shock Adjustment: Lever on shock or remote (optional remote sold separately) Full Lockout: No Shock Pump Included: No Mounting Kit Included: No (mounting hardware is bike frame specific)Manufacturer's Part Number: 190mm, 45mm Stroke: 973-01-314; 210mm, 50mm Stroke: 973-01-315; 210mm, 52.5mm Stroke: 973-01-316; 210mm, 55mm Stroke: 973-01-317; 230mm, 65mm Stroke: 973-01-312; 230mm, 60mm Stroke: 973-01-313; 185mm, 44mm Stroke: 973-01-318; 190mm, 50mm Stroke: 973-01-304; 200mm, 50mm Stroke: 973-01-305; 200mm, 57mm Stroke: 973-01-306; 215mm, 65mm Stroke: 973-01-307Technologies: Float DPX2 Damper: X2 small bump sensitivity meets DPS lightweight and simplicity. A three-position lever with adjustable open mode offers 10 clicks to fine-tune compression. There's also a recirculating oil damper design for more control EVOL Air Sleeve: This lightweight, one-piece EVOL air sleeve improves responsiveness and sensitivityBuy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fox Suspension Float DPX2 Factory 3Pos-Adjust LV ShockBringing together the ride quality and tunability of Fox Suspension’s Float X2 and the lightweight simplicity of its dual piston system (DPS), the DPX2 Factory 3 Position Adjustable LV Rear Shock is one of its most advanced trail models. It features a completely revised base valve design with 10 clicks of compression adjustability that's combined with an EVOL air sleeve for superior responsiveness and sensitivity. Coming complete with a stunning genuine Kashima coating and updated graphics, this is a perfect upgrade to add smoother and more reliable performance to your trail-ready mountain bike (MTB).Features: Finish: Genuine Kashima Coat with updated graphics Mount Type: Eyelets Compatibility: Frames with standard eyelet mounts Use: All-Mountain (AM), Trail Damper: Float DPX2 with 3-position lever with adjustable open mode offers 10 clicks to fine-tune compression, recirculating oil damper design for more control Air Sleeve: One-piece extra volume (EVOL) air sleeve Volume: Large volume Sizes: Imperial and metric sizes Shock Adjustment: Lever on shock or remote (optional remote sold separately) Full Lockout: No Shock Pump Included: No Mounting Kit Included: No (mounting hardware is bike frame specific)Manufacturer's Part Number: 190mm, 45mm Stroke: 973-01-314; 210mm, 50mm Stroke: 973-01-315; 210mm, 52.5mm Stroke: 973-01-316; 210mm, 55mm Stroke: 973-01-317; 230mm, 65mm Stroke: 973-01-312; 230mm, 60mm Stroke: 973-01-313; 185mm, 44mm Stroke: 973-01-318; 190mm, 50mm Stroke: 973-01-304; 200mm, 50mm Stroke: 973-01-305; 200mm, 57mm Stroke: 973-01-306; 215mm, 65mm Stroke: 973-01-307Technologies: Float DPX2 Damper: X2 small bump sensitivity meets DPS lightweight and simplicity. A three-position lever with adjustable open mode offers 10 clicks to fine-tune compression. There's also a recirculating oil damper design for more control EVOL Air Sleeve: This lightweight, one-piece EVOL air sleeve improves responsiveness and sensitivityBuy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fox Suspension Float DPS Factory Remote Rear MTB ShockCombining an EVOL air spring, remote actuated open and firm modes as well as rebound and air spring pressure adjustments, this Factory Series mountain bike (MTB) rear shock is a perfect upgrade for uncompromised performance on your ride. Packed with features that are designed to exceed the demands of Fox Suspension's Factory-level riders, this model is kitted out with a genuine Kashima coating that provides increased durability, silky smooth operation and an eye-catching finish that complements any ride.EVOL Air Spring and AdjustmentsThe Float DPS helps you make perfect turns without cutting corners by using a dual piston system that pairs exceptional bump compliance with efficiency to conserve energy for when you need it most. It's also kitted out with a one-piece EVOL air spring that improves responsiveness and sensitivity, while its range of adjustment features allow you to easily fine-tune its suspension performance. Thanks to its remote actuation, you can effortlessly switch between open and firm modes to match the terrain conditions. This model is also equipped with adjustable rebound and air spring pressure, so you can dial-in your ideal settings for a more rider-tuned feel.The Fox Suspension Float DPS Factory Remote Shock's lightweight chassis, EVOL air spring, and dual piston (DPS) damper create a pedal-friendly shock that soaks up the bumps and delivers pedal power to the ground with utmost efficiency.Features: Body Finish: Genuine Kashima coating Air Sleeve Finish: Genuine Kashima coating Use: MTB Spring Type: EVOL Air spring Damper: DPS Adjustments: Two-position remote actuated Open and Firm modes, rebound and air spring pressure Remote Actuated: Yes Remote Included: No, available separatelyTechnologies: Factory Series: “Factory” says it all - feature-packed and designed to exceed the demands of our Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. Updated graphics. Dual Piston valve design improves both rebound and compression flow. Lightweight, one-piece EVOL air sleeve improves responsiveness and sensitivity.Buy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fox Suspension Float DPS Performance SV Rear MTB ShockFeaturing a hard-wearing anodised finish, this Performance Series mountain bike (MTB) rear shock offers fantastic durability and corrosion resistance as you conquer your local trails in all-weather conditions. This model is also equipped with a lightweight one-piece EVOL air spring, which ensures you'll benefit from its improved responsiveness and sensitivity as it absorbs the sudden knocks and bumps associated with trail-riding.DPS Damper and AdjustmentsThis trail-ready rear shock is kitted out with a dual piston system (DPS) damper that pairs exceptional bump compliance with efficiency, helping you conserve energy for when you need it most. Its damper uses a three position lever to allow you to easily switch between its open, medium and firm modes. Fox Suspension has also equipped this model with an open mode adjust tuning range (1, 2, 3), rebound and air spring pressure adjustments, so you can fine-tune your rear suspension to fit in with your riding style as well as the terrain conditions.Features: Finish: Anodised Use: MTB Spring Type: EVOL Air Spring Damper Type: DPS damper with three positions (Open, Medium and Firm modes) Lever Actuated: Yes Remote Actuated: No Valve Design: Dual piston Adjustments: Lever actuated Open, Medium and Firm modes, Open mode adjust tuning range (1, 2, 3), rebound and air spring pressureTechnologies: DPS damper with three positions - Open, Medium, Firm modes. Dual Piston valve design improves both rebound and compression flow. Lightweight, one-piece EVOL air sleeve improves responsiveness and sensitivity.Buy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fox Suspension Float X2 Factory 2-Position Adjust ShockFeaturing an updated chassis and damper, this high-quality mountain bike (MTB) rear shock delivers game-changing performance as you conquer the most demanding of trail conditions. Part of Fox Suspension's renowned Factory Series, this model is packed with features and includes a genuine Kashima coating for increased durability as well as slippery smooth operation on your ride. Coming equipped with a two-position open/firm lever for easy adjustment, Variable Valve Control (VVC) for improved high-speed rebound tunability and a lightweight air spring that provides coil-like comfort, this model is a perfect upgrade for smooth and reliable rear-end suspension.Features: Finish: Genuine Kashima coating Use: MTB Spring Type: Air spring Adjustment Lever: 2-position Open/Firm lever (retains high and low speed compression adjustment) Adjustment Features: High and low speed compression, high and low speed rebound Variable Valve Control (VVC) Rebound: Yes Max PSI: 300psiTechnologies: Factory Series: “Factory” says it all - feature-packed and designed to exceed the demands of our Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. Updated Damper: The Float X2's 4-way adjustable, twin-tube architecture now features patented Variable Valve Control (VVC) technology on the high-speed rebound circuit for unrivalled external fine-tuning. Updated compression ratios and a MCU bumper deliver improved progressivity and bottom out control with fewer volume spacers. Independent Firm Mode Circuit: A 2-position switch operates on an independent circuit, providing a notably firmer lockout than before, allowing for efficient climbing and wide-open descending. Updated Chassis: Float X2's entirely revised chassis features an ultra-low friction hard chrome damper shaft, updated low-friction bushings and seals, and genuine Kashima coated outer body for smoother performance than ever before. High-flow main piston. Improved bearing ratio for metric sizes. Improved high-speed rebound tunability via addition of VVC (Variable Valve Control). Increased control and decreased harshness via linear damping. Reduced length reservoir for better fit on more frames. Finned inner body for improved structural rigidity and reduced hysteresis. Matching 8-click HSC and HSR adjustment on GRIP2 forks and X2 shocks. Updated compression ratios, 300psi max.Buy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fox Suspension Float X2 Factory 2-Position Adjust ShockFeaturing an updated chassis and damper, this high-quality mountain bike (MTB) rear shock delivers game-changing performance as you conquer the most demanding of trail conditions. Part of Fox Suspension's renowned Factory Series, this model is packed with features and includes a genuine Kashima coating for increased durability as well as slippery smooth operation on your ride. Coming equipped with a two-position open/firm lever for easy adjustment, Variable Valve Control (VVC) for improved high-speed rebound tunability and a lightweight air spring that provides coil-like comfort, this model is a perfect upgrade for smooth and reliable rear-end suspension.Features: Finish: Genuine Kashima coating Use: MTB Spring Type: Air spring Adjustment Lever: 2-position Open/Firm lever (retains high and low speed compression adjustment) Adjustment Features: High and low speed compression, high and low speed rebound Variable Valve Control (VVC) Rebound: Yes Max PSI: 300psiTechnologies: Factory Series: “Factory” says it all - feature-packed and designed to exceed the demands of our Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. Updated Damper: The Float X2's 4-way adjustable, twin-tube architecture now features patented Variable Valve Control (VVC) technology on the high-speed rebound circuit for unrivalled external fine-tuning. Updated compression ratios and a MCU bumper deliver improved progressivity and bottom out control with fewer volume spacers. Independent Firm Mode Circuit: A 2-position switch operates on an independent circuit, providing a notably firmer lockout than before, allowing for efficient climbing and wide-open descending. Updated Chassis: Float X2's entirely revised chassis features an ultra-low friction hard chrome damper shaft, updated low-friction bushings and seals, and genuine Kashima coated outer body for smoother performance than ever before. High-flow main piston. Improved bearing ratio for metric sizes. Improved high-speed rebound tunability via addition of VVC (Variable Valve Control). Increased control and decreased harshness via linear damping. Reduced length reservoir for better fit on more frames. Finned inner body for improved structural rigidity and reduced hysteresis. Matching 8-click HSC and HSR adjustment on GRIP2 forks and X2 shocks. Updated compression ratios, 300psi max.Buy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fox Suspension Float X2 Factory 2-Position Adjust ShockFeaturing an updated chassis and damper, this high-quality mountain bike (MTB) rear shock delivers game-changing performance as you conquer the most demanding of trail conditions. Part of Fox Suspension's renowned Factory Series, this model is packed with features and includes a genuine Kashima coating for increased durability as well as slippery smooth operation on your ride. Coming equipped with a two-position open/firm lever for easy adjustment, Variable Valve Control (VVC) for improved high-speed rebound tunability and a lightweight air spring that provides coil-like comfort, this model is a perfect upgrade for smooth and reliable rear-end suspension.Features: Finish: Genuine Kashima coating Use: MTB Spring Type: Air spring Adjustment Lever: 2-position Open/Firm lever (retains high and low speed compression adjustment) Adjustment Features: High and low speed compression, high and low speed rebound Variable Valve Control (VVC) Rebound: Yes Max PSI: 300psiTechnologies: Factory Series: “Factory” says it all - feature-packed and designed to exceed the demands of our Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. Updated Damper: The Float X2's 4-way adjustable, twin-tube architecture now features patented Variable Valve Control (VVC) technology on the high-speed rebound circuit for unrivalled external fine-tuning. Updated compression ratios and a MCU bumper deliver improved progressivity and bottom out control with fewer volume spacers. Independent Firm Mode Circuit: A 2-position switch operates on an independent circuit, providing a notably firmer lockout than before, allowing for efficient climbing and wide-open descending. Updated Chassis: Float X2's entirely revised chassis features an ultra-low friction hard chrome damper shaft, updated low-friction bushings and seals, and genuine Kashima coated outer body for smoother performance than ever before. High-flow main piston. Improved bearing ratio for metric sizes. Improved high-speed rebound tunability via addition of VVC (Variable Valve Control). Increased control and decreased harshness via linear damping. Reduced length reservoir for better fit on more frames. Finned inner body for improved structural rigidity and reduced hysteresis. Matching 8-click HSC and HSR adjustment on GRIP2 forks and X2 shocks. Updated compression ratios, 300psi max.Buy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fox Suspension Float X2 Factory 2-Position Adjust ShockFeaturing an updated chassis and damper, this high-quality mountain bike (MTB) rear shock delivers game-changing performance as you conquer the most demanding of trail conditions. Part of Fox Suspension's renowned Factory Series, this model is packed with features and includes a genuine Kashima coating for increased durability as well as slippery smooth operation on your ride. Coming equipped with a two-position open/firm lever for easy adjustment, Variable Valve Control (VVC) for improved high-speed rebound tunability and a lightweight air spring that provides coil-like comfort, this model is a perfect upgrade for smooth and reliable rear-end suspension.Features: Finish: Genuine Kashima coating Use: MTB Spring Type: Air spring Adjustment Lever: 2-position Open/Firm lever (retains high and low speed compression adjustment) Adjustment Features: High and low speed compression, high and low speed rebound Variable Valve Control (VVC) Rebound: Yes Max PSI: 300psiTechnologies: Factory Series: “Factory” says it all - feature-packed and designed to exceed the demands of our Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. Updated Damper: The Float X2's 4-way adjustable, twin-tube architecture now features patented Variable Valve Control (VVC) technology on the high-speed rebound circuit for unrivalled external fine-tuning. Updated compression ratios and a MCU bumper deliver improved progressivity and bottom out control with fewer volume spacers. Independent Firm Mode Circuit: A 2-position switch operates on an independent circuit, providing a notably firmer lockout than before, allowing for efficient climbing and wide-open descending. Updated Chassis: Float X2's entirely revised chassis features an ultra-low friction hard chrome damper shaft, updated low-friction bushings and seals, and genuine Kashima coated outer body for smoother performance than ever before. High-flow main piston. Improved bearing ratio for metric sizes. Improved high-speed rebound tunability via addition of VVC (Variable Valve Control). Increased control and decreased harshness via linear damping. Reduced length reservoir for better fit on more frames. Finned inner body for improved structural rigidity and reduced hysteresis. Matching 8-click HSC and HSR adjustment on GRIP2 forks and X2 shocks. Updated compression ratios, 300psi max.Buy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fox Suspension Float X2 Factory 2 Position Adjust ShockFeaturing an award-winning and gravity-defying design, this mountain bike (MTB) rear shock holds nothing back, especially not you as you dominate on your favourite local trails. Part of Fox Suspension's renowned Factory Series, this model is equipped with a stunning genuine Kashima coating that offers slippery smooth performance, increased durability on the more demanding of terrains, and also complements your ride with its eye-catching finish. Adjustable Rear Shock with Variable Valve Control (VVC)Coming feature-packed with a design that's intended to exceed the demands of Fox Suspension's Factory-level riders, this rear shock is kitted out with a two-position lever. Developed for ease of use, its lever makes it simple to switch between open and firm modes to suit the terrain or course conditions on your ride. Another highlight is its range of adjustment features that include high and low speed compression as well as high and low speed rebound. This version is also equipped with Variable Valve Control (VVC) for improved high-speed rebound tunability. As a result, you'll be able to dial in your ideal settings to match your riding style and enjoy more rider-tuned rear suspension performance. Features: Finish: Genuine Kashima coating Use: MTB Spring Type: Air spring Adjustment Lever: 2-position Open/Firm lever (retains high and low speed compression adjustment) Adjustment Features: High and low speed compression, high and low speed rebound Variable Valve Control (VVC) Rebound: Yes Max PSI: 300psiTechnologies: Factory Series: “Factory” says it all - feature-packed and designed to exceed the demands of our Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. Updated Damper: The Float X2's 4-way adjustable, twin-tube architecture now features patented Variable Valve Control (VVC) technology on the high-speed rebound circuit for unrivalled external fine-tuning. Updated compression ratios and a MCU bumper deliver improved progressivity and bottom out control with fewer volume spacers. Independent Firm Mode Circuit: A 2-position switch operates on an independent circuit, providing a notably firmer lockout than before, allowing for efficient climbing and wide-open descending. Updated Chassis: Float X2's entirely revised chassis features an ultra-low friction hard chrome damper shaft, updated low-friction bushings and seals, and genuine Kashima coated outer body for smoother performance than ever before. High-flow main piston. Improved bearing ratio for metric sizes. Increased control and decreased harshness via linear damping. Reduced length reservoir for better fit on more frames. Finned inner body for improved structural rigidity and reduced hysteresis. Matching 8-click HSC and HSR adjustment on GRIP2 forks and X2 shocks. Updated compression ratios, 300psi max.Buy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fox Suspension Float X2 Factory Rear ShockCombining ultra-plush coil-like comfort with incredible damping expertise, this trail-ready mountain bike (MTB) rear shock brings new levels of control and performance to every terrain imaginable. Coming packed with many of Fox Suspension's proven technologies, this model is part of the renowned Factory Series and is equipped with a genuine Kashima coating for increased durability, smooth performance and an eye-catching finish. Boasting an updated chassis, damper and compression ratios, it's specially developed to exceed the demands of Factory-level riders.Air Spring Rear Shock with Variable Valve Control (VVC)Benefitting from the lightweight of its air spring and an unmatched level of tunability, this rear shock is ready for the rigours of modern trail riding. It's kitted out with high and low speed compression as well as high and low speed rebound adjustments, so you can fine-tune its suspension performance to match your riding style as well as the terrain conditions. Delivering a more rider-tuned feel, this version is also equipped with Fox Suspension's patented Variable Valve Control (VVC) technology on the high-speed rebound circuit for unrivalled external fine-tuning. The X2 changes everything, including the game. This award-winning, gravity-defying air shock holds nothing back, especially not you. With a laundry list of advanced features, the Fox Suspension Float x2 Factory Shock is ready to clean house.Features: Finish: Genuine Kashima coating Use: MTB Spring Type: Air spring Adjustment Features: High and low speed compression, high and low speed rebound Variable Valve Control (VVC) Rebound: Yes Max PSI: 300psi Lever Actuated: Yes, 2-position climb lever Remote Actuated: NoTechnologies: Factory Series: “Factory” says it all - feature-packed and designed to exceed the demands of our Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. Updated Damper: The Float X2's 4-way adjustable, twin-tube architecture now features patented Variable Valve Control (VVC) technology on the high-speed rebound circuit for unrivalled external fine-tuning. Updated compression ratios and a MCU bumper deliver improved progressivity and bottom out control with fewer volume spacers. Updated Chassis: Float X2's entirely revised chassis features an ultra-low friction hard chrome damper shaft, updated low-friction bushings and seals, and genuine Kashima coated outer body for smoother performance than ever before. High-flow main piston. Improved bearing ratio for metric sizes. Increased control and decreased harshness via linear damping. Reduced length reservoir for better fit on more frames. Finned inner body for improved structural rigidity and reduced hysteresis. Matching 8-click HSC and HSR adjustment on GRIP2 forks and X2 shocks. Updated compression ratios, 300psi max.Buy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fox Suspension DHX2 Factory 2-Position Adjust ShockFeaturing a coil spring ready design, an updated chassis and damper plus a high-flow main piston for precise and controlled handling, this trail-ready rear shock is well-equipped for the most demanding of terrain conditions. Part of Fox Suspension's prestigious Factory Series, this model is kitted out with proven technologies and is designed to exceed the demands of Factory-level riders.Adjustable Coil Spring Rear ShockBenefitting from Fox Suspension's finest technologies for modern mountain bike riding, this rear shock is equipped with a coil spring ready design and an updated damper. The updated X2 damper maintains a twin tube architecture, employing a proven dual-shim stack main piston for improved damping and more precise tuning than ever before. Fox Suspension also added its patented Variable Valve Control (VVC) technology to the high-speed rebound (HSR) circuit, which allows for easy, external fine-tuning of your suspension performance. Just like GRIP2 forks, the X2 family of shocks also feature identical 8 clicks of adjustment on high-speed compression (HSC) and high-speed rebound (HSR). This allows you to make consistent adjustments between their front and rear suspension. Nothing sticks to the ground quite like a coil shock. With an entirely updated chassis and damper, enhanced tunability, smoother action, and a MCU bumper for progressivity and end-stroke control - the Fox Suspension DHX2 Factory 2Pos-Adj Shock is ready to race straight out of the gate.Please note: A coil spring is not included with this model but is available to purchase separately.Features: Shaft Coating: Chromoly (CrMo) Steel Use: MTB Spring Type: Coil spring Adjustment Lever: 2-position Open/Firm lever (retains high and low speed compression adjustment) Adjustment Features: High and low speed compression, high and low speed rebound Variable Valve Control (VVC) Rebound: Yes Detents on Spring Collar: Yes Spring Included: No, available separatelyTechnologies: Factory Series: “Factory” says it all - feature-packed and designed to exceed the demands of Fox Suspension's Factory-level riders. What we sell is what they race. Updated Chassis: The outer body on the DHX2 features steel construction with finned inner tubes for reduced hysteresis. DHX2 features an updated low-friction hard chrome coating on the shaft with new seals designed to pair perfectly to the new shaft coating, reducing frictions and increasing seal life. Updated Damper: The updated X2 damper maintains a twin tube architecture, emplying a proven dual-shim stack main piston for improved damping and more precise tuning than ever before. Fox Suspension added its patented VVC technology to the HSR circuit. VVC is a proprietary variable valve technology that allows for easy, external fine-tuning of suspension performance. Just like GRIP2 forks, the X2 family of shocks also feature identical 8 clicks of adjustment on HSC and HSR. This allows the rider to make consistent adjustments between front and rear suspension. MCU Bumper: The updated MCU bumper is designed to allow for supple beginning and mid-stroke, seamlessly transitioning to a bottomless end-stroke. Independent Firm Mode Circuit: This version's 2-position switch operates on an independent circuit, resulting in a firmer lockout. Revised Spring Changes: The coil-sprung DHX2 now uses a full spring collar, held in place with a C-clip, and a new preload collar with indexed notches to allow for light preload without the collar backing off.Buy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fox Suspension DHX2 Factory 2-Position Adjust ShockFeaturing a coil spring ready design, an updated chassis and damper plus a high-flow main piston for precise and controlled handling, this trail-ready rear shock is well-equipped for the most demanding of terrain conditions. Part of Fox Suspension's prestigious Factory Series, this model is kitted out with proven technologies and is designed to exceed the demands of Factory-level riders.Adjustable Coil Spring Rear ShockBenefitting from Fox Suspension's finest technologies for modern mountain bike riding, this rear shock is equipped with a coil spring ready design and an updated damper. The updated X2 damper maintains a twin tube architecture, employing a proven dual-shim stack main piston for improved damping and more precise tuning than ever before. Fox Suspension also added its patented Variable Valve Control (VVC) technology to the high-speed rebound (HSR) circuit, which allows for easy, external fine-tuning of your suspension performance. Just like GRIP2 forks, the X2 family of shocks also feature identical 8 clicks of adjustment on high-speed compression (HSC) and high-speed rebound (HSR). This allows you to make consistent adjustments between their front and rear suspension. Nothing sticks to the ground quite like a coil shock. With an entirely updated chassis and damper, enhanced tunability, smoother action, and a MCU bumper for progressivity and end-stroke control - the Fox Suspension DHX2 Factory 2Pos-Adj Shock is ready to race straight out of the gate.Please note: A coil spring is not included with this model but is available to purchase separately.Features: Shaft Coating: Chromoly (CrMo) Steel Use: MTB Spring Type: Coil spring Adjustment Lever: 2-position Open/Firm lever (retains high and low speed compression adjustment) Adjustment Features: High and low speed compression, high and low speed rebound Variable Valve Control (VVC) Rebound: Yes Detents on Spring Collar: Yes Spring Included: No, available separatelyTechnologies: Factory Series: “Factory” says it all - feature-packed and designed to exceed the demands of Fox Suspension's Factory-level riders. What we sell is what they race. Updated Chassis: The outer body on the DHX2 features steel construction with finned inner tubes for reduced hysteresis. DHX2 features an updated low-friction hard chrome coating on the shaft with new seals designed to pair perfectly to the new shaft coating, reducing frictions and increasing seal life. Updated Damper: The updated X2 damper maintains a twin tube architecture, emplying a proven dual-shim stack main piston for improved damping and more precise tuning than ever before. Fox Suspension added its patented VVC technology to the HSR circuit. VVC is a proprietary variable valve technology that allows for easy, external fine-tuning of suspension performance. Just like GRIP2 forks, the X2 family of shocks also feature identical 8 clicks of adjustment on HSC and HSR. This allows the rider to make consistent adjustments between front and rear suspension. MCU Bumper: The updated MCU bumper is designed to allow for supple beginning and mid-stroke, seamlessly transitioning to a bottomless end-stroke. Independent Firm Mode Circuit: This version's 2-position switch operates on an independent circuit, resulting in a firmer lockout. Revised Spring Changes: The coil-sprung DHX2 now uses a full spring collar, held in place with a C-clip, and a new preload collar with indexed notches to allow for light preload without the collar backing off.Buy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fox Suspension Float DPS Factory Shock SVFeaturing a lightweight EVOL air spring, this mountain bike (MTB) rear shock delivers exceptional responsiveness and sensitivity as you charge from trail to trail. Fox Suspension has also equipped it with a Dual Piston valve design that improves both rebound and compression flow for a smoother ride. Part of the renowned Factory Series, this version has a genuine Kashima coating on its body and air sleeve, which offers enhanced lubrication and a harder wearing surface, resulting in increased shock smoothness and sensitivity on the trails.Factory Series MTB Rear Shock with DPS DamperReady for wherever your next trail-riding adventure takes you, this MTB rear shock comes kitted out with a DPS damper to keep your ride under control. Its damper features three positions of adjustment, where you can choose from Open, Medium and Firm modes to tailor how you want it to respond to the terrain conditions. Fox Suspension has also equipped it with an Open mode adjust tuning range (1, 2, 3) as well as adjustable rebound and air spring pressure. This gives you everything you need to dial-in your ideal settings for rear suspension performance that matches your riding style as well as the terrain.Exceptional Bump Compliance Meets Exceptional Efficiency With a lightweight chassis, EVOL air spring, and dual piston damper with 3-position switch, the Fox Suspension Float DPS Factory Shock SV creates a pedal-friendly shock that soaks up the bumps and delivers pedal power to the ground with utmost efficiency.Features: Body Finish: Genuine Kashima Coat Air Sleeve Finish: Genuine Kashima Coat Use: MTB Lever Actuated: Yes, 3-position lever Damper: DPS with three adjustment positions: Open/Medium/Firm modes Open mode adjust tuning range (1, 2, 3), Rebound and Air Spring Pressure Air Sleeve: One-piece EVOL air sleeve Piston Valve: Dual Piston valve Type: Standard Volume (SV)Technologies: Factory Series: “Factory” says it all - feature-packed and designed to exceed the demands of our Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. DPS damper with three positions - Open, Medium, Firm modes. Dual Piston valve design improves both rebound and compression flow. Lightweight, one-piece EVOL air sleeve improves responsiveness and sensitivity.Manufacturer's Part Numbers: 972-01-497 Black 6.5 x 1.5" 972-01-498 Black 7.25 x 1.75" 972-01-477 Black 7.875 x 2.0"Buy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fox Suspension DHX Factory 2-Position Adjust ShockBuilt for long days on your local trails with your riding buddies as well as exploring new routes on your own adventures, this high-quality Factory Series mountain bike (MTB) rear shock delivers coil performance for the trail and beyond. It features a hard-wearing chromoly (CrMo) steel shaft coating that has ultra-low friction properties and is highly durable as you tackle demanding terrain conditions on your ride. Packed with many of Fox Suspension's proven technologies, this model is also part of the renowned Factory Series family that's designed to exceed the demands of Factory-level riders.Coil Spring Ready and AdjustmentsReady for wherever your next trail ride leads you, this rear shock is kitted out with a coil spring ready design and a range of adjustment features to help you dial in your ideal settings. Fitted with an independent two-position lever, you'll benefit from being able to easy switch between open and firm modes to suit the terrain conditions. In addition, its low-speed compression and rebound adjustments make it simple to fine-tune its suspension performance to match your riding style for a more rider-tuned feel.Coil performance for the trail and beyond. Answering the call of riders seeking the ultimate in plush suspension, the Fox Suspension DHX Factory 2Pos-Adj Shock brings coil-sprung, magic-carpet, trail smoothing performance in a wide range of configurations to the trails and beyond.Features: Shaft Coating: Chromoly (CrMo) Steel Use: MTB Spring Type: Coil spring Adjustment Lever: Independent two-position Open/Firm lever Adjustment Features: Low-speed compression and rebound Coil Spring Preload: Detents on spring collar Spring Included: Not included. Available separatelyTechnologies: Factory Series: “Factory” says it all - feature-packed and designed to exceed the demands of Fox Suspension's Factory-level riders. What we sell is what they race. Updated chassis and damper. High-flow main piston. Numbered Tool-free 12 position single-turn LSC (Low Speed Compression) adjuster. Independent firm mode circuit - 2 position adjuster. Optimised reservoir lengths per shock size. Hydraulic top out feature. Reduced damper noise. MCU bottom out bumper. Single-turn rebound adjuster with a variety of access modes (Tool-free, 3mm hex (direct access), 2mm hex or similar (side access). Spring preload collar with detents and max / min number of clicks and direction arrow. Full diameter spring retainer with wire ring (like DHX2). Spring scuff guard on body (like DHX2).Buy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fox Suspension DHX Factory 2-Position Adjust ShockBuilt for long days on your local trails with your riding buddies as well as exploring new routes on your own adventures, this high-quality Factory Series mountain bike (MTB) rear shock delivers coil performance for the trail and beyond. It features a hard-wearing chromoly (CrMo) steel shaft coating that has ultra-low friction properties and is highly durable as you tackle demanding terrain conditions on your ride. Packed with many of Fox Suspension's proven technologies, this model is also part of the renowned Factory Series family that's designed to exceed the demands of Factory-level riders.Coil Spring Ready and AdjustmentsReady for wherever your next trail ride leads you, this rear shock is kitted out with a coil spring ready design and a range of adjustment features to help you dial in your ideal settings. Fitted with an independent two-position lever, you'll benefit from being able to easy switch between open and firm modes to suit the terrain conditions. In addition, its low-speed compression and rebound adjustments make it simple to fine-tune its suspension performance to match your riding style for a more rider-tuned feel.Coil performance for the trail and beyond. Answering the call of riders seeking the ultimate in plush suspension, the Fox Suspension DHX Factory 2Pos-Adj Shock brings coil-sprung, magic-carpet, trail smoothing performance in a wide range of configurations to the trails and beyond.Features: Shaft Coating: Chromoly (CrMo) Steel Use: MTB Spring Type: Coil spring Adjustment Lever: Independent two-position Open/Firm lever Adjustment Features: Low-speed compression and rebound Coil Spring Preload: Detents on spring collar Spring Included: Not included. Available separatelyTechnologies: Factory Series: “Factory” says it all - feature-packed and designed to exceed the demands of Fox Suspension's Factory-level riders. What we sell is what they race. Updated chassis and damper. High-flow main piston. Numbered Tool-free 12 position single-turn LSC (Low Speed Compression) adjuster. Independent firm mode circuit - 2 position adjuster. Optimised reservoir lengths per shock size. Hydraulic top out feature. Reduced damper noise. MCU bottom out bumper. Single-turn rebound adjuster with a variety of access modes (Tool-free, 3mm hex (direct access), 2mm hex or similar (side access). Spring preload collar with detents and max / min number of clicks and direction arrow. Full diameter spring retainer with wire ring (like DHX2). Spring scuff guard on body (like DHX2).Buy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Fox Suspension DHX2 Factory 2 Position Adjust ShockReady for all-day epics on your favourite local trails, this mountain bike (MTB) rear shock features a coil spring ready design, an updated chassis and damper plus a high-flow main piston for precise and controlled handling on the most demanding of terrains. Part of Fox Suspension's prestigious Factory Series, this model is kitted out with proven technologies and is designed to exceed the demands of Factory-level riders.Adjustable Coil Spring Rear ShockBenefitting from Fox Suspension's finest technologies for modern mountain bike riding, this rear shock is equipped with a coil spring ready design and an updated damper. The updated X2 damper maintains a twin tube architecture, employing a proven dual-shim stack main piston for improved damping and more precise tuning than ever before. Fox Suspension also added its patented Variable Valve Control (VVC) technology to the high-speed rebound (HSR) circuit, which allows for easy, external fine-tuning of your suspension performance. Just like GRIP2 forks, the X2 family of shocks also feature identical 8 clicks of adjustment on high-speed compression (HSC) and high-speed rebound (HSR). This allows you to make consistent adjustments between their front and rear suspension. Nothing sticks to the ground quite like a coil shock. With an entirely updated chassis and damper, enhanced tunability, smoother action, and a MCU bumper for progressivity and end-stroke control - the Fox Suspension DHX2 Factory 2Pos-Adj Shock is ready to race straight out of the gate.Please note: A coil spring is not included with this model but is available to purchase separately.Features: Shaft Coating: Chromoly (CrMo) Steel Use: MTB Spring Type: Coil spring Adjustment Lever: 2-position Open/Firm lever (retains high and low speed compression adjustment) Adjustment Features: High and low speed compression, high and low speed rebound Variable Valve Control (VVC) Rebound: Yes Detents on Spring Collar: Yes Spring Included: No, available separatelyTechnologies: Factory Series: “Factory” says it all - feature-packed and designed to exceed the demands of Fox Suspension's Factory-level riders. What we sell is what they race. Updated Chassis: The outer body on the DHX2 features steel construction with finned inner tubes for reduced hysteresis. DHX2 features an updated low-friction hard chrome coating on the shaft with new seals designed to pair perfectly to the new shaft coating, reducing frictions and increasing seal life. Updated Damper: The updated X2 damper maintains a twin tube architecture, emplying a proven dual-shim stack main piston for improved damping and more precise tuning than ever before. Fox Suspension added its patented VVC technology to the HSR circuit. VVC is a proprietary variable valve technology that allows for easy, external fine-tuning of suspension performance. Just like GRIP2 forks, the X2 family of shocks also feature identical 8 clicks of adjustment on HSC and HSR. This allows the rider to make consistent adjustments between front and rear suspension. MCU Bumper: The updated MCU bumper is designed to allow for supple beginning and mid-stroke, seamlessly transitioning to a bottomless end-stroke. Independent Firm Mode Circuit: This version's 2-position switch operates on an independent circuit, resulting in a firmer lockout. Revised Spring Changes: The coil-sprung DHX2 now uses a full spring collar, held in place with a C-clip, and a new preload collar with indexed notches to allow for light preload without the collar backing off.Buy Fox Suspension Components from Chain Reaction Cycles, the World's Largest Online Bike Store.