ENVE Pressure Relief Presta Valve Stem NutsThese valve stem nuts come as a pack of two and are specifically designed to ensure that an improper tubeless tape set-up doesn't result in a damaged rim. If the tubeless seal between your tyre's air chamber and the rim's cavity is breached, the rim's cavity can become pressurised resulting in a pressurised rim and potential delamination of the rim's sidewall. These pressure relief valve stem nuts prevent this from happening by creating an escape for the air via fluted reliefs on the inner diameter of the nut. Air escaping from these ports, indicates a compromised tubeless seal.Recommended for all tubeless ENVE SES wheelsets as well as other brand road tubeless wheelsets.Features: Use: Road Size: Comes as a pack of two Manufacturer's Part Numbers: EN7201012Buy ENVE Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
What is it?An all-day, all-night merino wool cycling compression sock with the distinctive ENVE logo.Who is it for?Any cyclist, runner or triathlete.Why did we make it?We didn't. Swiftwick makes them for us and they are terrific. They are on exactly all 180 of our employees feet (360 feet total) everyday.
ENVE Presta Valve Extender SetCreated by Silca for ENVE, this set of valve extenders is developed to offer easy inflation, whatever the depth of your wheels. Sold as a pair, these valve extenders are suitable for tubes and tubular tyres with removable valve cores.CompatibilityThe 34mm set is optimised for the ENVE SES 3.4 and ENVE SES 3.4 Disc wheelsets.The 45mm set is optimised for the ENVE SES 4.5 and ENVE SES 5.6 Disc wheelsets.The 75mm set is optimised for the ENVE SES 7.8 and ENVE SES 7.8 Disc wheelsets.ENVE recommends that the length of your tyre/tube valve plus the length of your extender exceeds the depth of the rim by at least 10mm. Suitable for all road, triathlon, gravel and cyclocross riders using any ENVE tubular or non-tubeless clincher rim with stock valves shorter than the rim depth. Not suitable for tubeless setups.Features: Use: Road, Triathlon, Gravel and Cyclocross Length: Multiple options available to select Single or Pair: Pair Manufacturer's Part Numbers: 75mm: EN73000275l; 45mm: EN73000245 and 34mm: EN73000234Buy ENVE Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
The ENVE Seatpost Di2 Battery Plug is designed to hold the battery for Shimano Di2 electronic shifting systems securely inside your ENVE carbon seatpost.Designed specifically for ENVE seatposts, this plug keeps your Di2 battery in place whether you're riding on the road, gravel or trail without compromising the clean lines of your bike.
What is it?A super-strong ENVE compression plugWho is it for?Riders who need the confidence of exceptional holding power and the beauty of a carbon top cap with the ENVE logo.Why did we make it?A perfect compliment to your ENVE cockpit and fork. The ENVE compression plug keeps your ride straight as an arrow and looking good.
Over the last year we have been focused on improving the performance and longevity of braking on our road rims. As a result we introduce the ENVE grey pad that better manages heat, minimizes abrasion, and performs in wet conditions. The ENVE grey pad will be supplied with all new wheel sets and available for purchase aftermarket as a composite specific brake pad.ENVE brake pads are sold in pairs 2 brake blocks for the use on one wheel you require 2 sets for a complete bike.
The official ENVE tubless kit for your M Series MTB wheels features custom-cut tapes and valves for a flawless setup.This high quality, simple and functional solution is designed specifically for each M Series wheel rim width to ensure a millimetre-perfect fit. The tubeless valves feature removable cores so you can easily refresh the sealant when required.The kit is suitable for one pair of wheels.
What It IsValve stem extenders for tubular tires and tubes with removable valve core.ENVE recommends that the length of your tire/tube valve + the length of your extender exceeds the depth of the rim by at least 10mm.Who It’s ForRoad, gravel, cyclocross riders using any ENVE tubular or non-tubeless clincher.Why We Made ItTo ensure that your valve stems are easily accessible and not buried inside the rim cavity.
The official ENVE tubless kit for your M Series MTB wheels features custom-cut tapes and valves for a flawless setup. This high quality, simple and functional solution is designed specifically for each M Series wheel rim width to ensure a millimetre-perfect fit. The tubeless valves feature removable cores so you can easily refresh the sealant when required. The kit is suitable for one pair of wheels.Rim Model - M525Valve Stem F/R - 47mm/47mm,Tape Width - 29mm,Tape Colour - Red.Rim Model - M630Valve Stem F/R - 47mm/47mm ,Tape Width - 34mm ,Tape Colour - Red.Rim Model - M635Valve Stem F/R - 47mm/47mm ,Tape Width - 38mm ,Tape Colour - Red.Rim Model - M60HV/M70/M90Valve Stem F/R - 47mm/47mm ,Tape Width - 29mm ,Tape Colour - Black.Rim Model - M70HVValve Stem F/R - 47mm/47mm ,Tape Width - 34mm ,Tape Colour - Black.
ENVE Foundation Tubeless Tyre KitThis tubeless kit is specifically designed for use with ENVE Foundation wheelsets. This makes it ideal for riders who already have a tubeless-compatible wheelset and would like to refresh their set-up for box-fresh performance.Compatibility65mm Option: This option is designed for ENVE Foundation 65 road bike wheelsets.45mm Option: This option is designed for ENVE Foundation 45 road bike wheelsets.AM30 Option: This option is designed for ENVE Foundation AM30 mountain bike wheelsets.What's IncludedA tubeless kit needs to be simple and functional and this is ENVE's solution. Tape is cut specifically to rim widths to ensure a proper fit, tubeless valves feature removable cores for easy sealant refresh, and a valve core removal tool is included. The tape roll has enough tape for three wheels.Please Note: These kits aren't meant to convert a non-tubeless wheelset to tubeless and should only be used to refresh an already tubeless-compatible wheel.Features: Use: Road, Gravel and MTB Included: Tubeless tape, tubeless valves with removable cores and a valve core removal tool Tape Length: There is enough tape for three wheels Compatibility: Multiple options available to select Manufacturer's Part Numbers: 65mm: EN72031065; 45mm: EN72031045; AM30: EN72030AM30Buy ENVE Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
ENVE Foundation Tubeless Tyre KitThis tubeless kit is specifically designed for use with ENVE Foundation wheelsets. This makes it ideal for riders who already have a tubeless-compatible wheelset and would like to refresh their set-up for box-fresh performance.Compatibility65mm Option: This option is designed for ENVE Foundation 65 road bike wheelsets.45mm Option: This option is designed for ENVE Foundation 45 road bike wheelsets.AM30 Option: This option is designed for ENVE Foundation AM30 mountain bike wheelsets.What's IncludedA tubeless kit needs to be simple and functional and this is ENVE's solution. Tape is cut specifically to rim widths to ensure a proper fit, tubeless valves feature removable cores for easy sealant refresh, and a valve core removal tool is included. The tape roll has enough tape for three wheels.Please Note: These kits aren't meant to convert a non-tubeless wheelset to tubeless and should only be used to refresh an already tubeless-compatible wheel.Features: Use: Road, Gravel and MTB Included: Tubeless tape, tubeless valves with removable cores and a valve core removal tool Tape Length: There is enough tape for three wheels Compatibility: Multiple options available to select Manufacturer's Part Numbers: 65mm: EN72031065; 45mm: EN72031045; AM30: EN72030AM30Buy ENVE Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
ENVE Foundation Tubeless Tyre KitThis tubeless kit is specifically designed for use with ENVE Foundation wheelsets. This makes it ideal for riders who already have a tubeless-compatible wheelset and would like to refresh their set-up for box-fresh performance.Compatibility65mm Option: This option is designed for ENVE Foundation 65 road bike wheelsets.45mm Option: This option is designed for ENVE Foundation 45 road bike wheelsets.AM30 Option: This option is designed for ENVE Foundation AM30 mountain bike wheelsets.What's IncludedA tubeless kit needs to be simple and functional and this is ENVE's solution. Tape is cut specifically to rim widths to ensure a proper fit, tubeless valves feature removable cores for easy sealant refresh, and a valve core removal tool is included. The tape roll has enough tape for three wheels.Please Note: These kits aren't meant to convert a non-tubeless wheelset to tubeless and should only be used to refresh an already tubeless-compatible wheel.Features: Use: Road, Gravel and MTB Included: Tubeless tape, tubeless valves with removable cores and a valve core removal tool Tape Length: There is enough tape for three wheels Compatibility: Multiple options available to select Manufacturer's Part Numbers: 65mm: EN72031065; 45mm: EN72031045; AM30: EN72030AM30Buy ENVE Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
The ENVE Road Tubeless Kit is a complete tubeless conversion kit is designed for your SES 2.2, 3.4, 4.5 AR, 5.6, 7.8 wheelsets. Designed for SES wheel owners who need to replace their tubeless conversion kits.The tape is cut specifically to rim widths to ensure proper fit. Tubeless valves feature removable cores for easy sealant refresh. Valve core removal tool included.
The ENVE SES Road Tyre is a tubeless-ready tyre built to ENVE’s “real-world fast” philosophy. The tyre provides best-in-class aerodynamics while balancing hard-wearing reliability, low-rolling resistance, puncture protection, user friendly tubeless, and a lightweight design.The ENVE tyre is optimised for use on ENVE SES wheels but reduces drag on non-ENVE aero wheelsets too. When used on ENVE wheels, the 25c ENVE road tyre improves aerodynamic efficiencies over leading competition at all speeds. The 29c version is on par with leading tires at 32kph, but its aero advantage becomes more apparent at 48kph. On non-ENVE wheels the tyres still achieve an aero advantage over the industry benchmark, being up to 2 watts more efficient at 48kph.The Breakaway Tread design on the SES tyre aids airflow attachment, meaning no advantage is lost at the interface between tyre and rim.The shape of the tyre when inflated provides an aerodynamic advantage over round tyre profiles, while also providing better handling and rolling resistance than elliptical shaped tyres, living up to ENVE’s ability to produce components that are rideable everyday while also being race ready. Take to uneven roads with confidence, thanks to leading puncture protection and high grip. Vectran™ provides leading protection against punctures and pinch flats, while the SPC Silica compound uses a blend of natural compounds and Activated Silica filler for superb wet road grip and low rolling resistance.The Zylon™ synthetic polymer bead material helps provide a consistent seal with hookless rims for improved air retention. The rim bead diameter is also refined for paring with the SES rim bead seat diameter. This provides optimum performance and tyre retention, ultimately inspiring use and confidence in your tubeless set up. Key Features Tubeless-ready tyre that can also be used with tubes ,Built to ENVE’s “real-world fast” philosophy, offering best-in-class aerodynamics while balancing hard-wearing reliability, low rolling-resistance, puncture resistance, user-friendly tubeless, and a lightweight design ,Zylon™ synthetic polymer bead material for its high strength, thermal stability, and low stretch ,Vectran™ is employed in the tyre’s casing to protect against punctures and pinch flats ,SPC Silica tread compound provides a balanced blend of synthetic and natural rubbers with Activated Silica filler for excellent wet weather performance and low rolling resistance , Aerodynamic tyre shape when inflated striking the perfect balance between handling, stability, rolling efficiency and aerodynamics ,Weight: 25c – 255g / 27c – 265g / 29c – 275g / 31c – 285g.
The ENVE M Series Rim Strip Kit is designed to replace the protective rim strip on M730, M735, M735 E or M930 wheelsets.ENVE's unique protective rim strip was created to minimise pinch flats when taking on big hits on the trail by providing a durable bumper layer between rim and tyre. The strip also provides a complete seal on the rim, so no additional tape is needed for your tubeless setup. This kit is to replace your original rim strips, which are mandatory on M7- and M9-series wheels. The kit also includes two valves and an installation/removal lever tool. PLEASE NOTECompatible only with the M730, M735, M735 E or M930 wheelsets. This will not fit older-generation wheels.
Designed specifically to give your wheels safe passage to and from the races, in the pits, or any other time your ENVE carbon isn't secured in your bike frame.Key Features:Fits up to 2 x 29" wheels with tires (2.25" and larger tires may require slight deflation for full closure of bag).Wheels are horizontally offset to keep the loaded bag slim.Made of durable abrasion resistant nylon.Outer walls are padded for secure travel and protection .Padded internal divider to prevent hub axle contact .2 x internal accessory pockets.ID sleeve.Removable shoulder strap..
What It IsHigh-end quick release skewers for ENVE carbon fibre wheels that also work well with any QR hubs and dropouts requiring 100/130mm (Rim Brake) or 100/135mm skewers (Disc Brake). Weight: 87g (100/130), 88g (100/135)Who It’s ForRoad, gravel, cyclocross, and triathletes looking for a lightweight and reliable skewer that will keep the axles anchored in the dropouts under the hardest pedalling and braking efforts.Why We Made ItThe finest wheels deserve the best skewers. These skewers echo our design ethos of lightweight, durability, and aesthetics.Full DetailsThe titanium ENVE quick release skewer for ENVE carbon fibre road cycling wheels are available in two different sizes based on your frame and brake type. Please select 100/130 for rim brake applications and 100/135 for disc brake applications.
The ENVE Alloy MTB Stem is a light, incredibly durable stem designed to offer top-shelf performance to cross country, trail, all-mountain, enduro and gravity mountain bike riding.With a 31.8mm or 35mm handlebar clamp diameter, the stem can be paired with an ENVE M6 or M7 carbon handlebar to offer a complete ENVE cockpit, giving you a stiffer, more race-orientated setup that is ideal for those who favour tight control and a solid front-end feel.The alloy stem features a ‘no gap faceplate’ that makes for even clamping and secure handlebar retention while reducing the likelihood of sensitive carbon laminates being damaged. Blind bolt holes diminish the number of sharp edges and reduce the risk of catching your knee or snagging clothing. Despite the brand’s fame for carbon components, ENVE has a long history working with metal due to carbon fibre moulds being machined from aluminium and steel – as well as alloy components such as hubs and stem faceplates.Cold-forged, then precision-machined, the ENVE Alloy MTB stem reflects the engineering prowess present in all ENVE equipment and sets the benchmark for alloy mountain bike stem performance. Key Features Cold-forged alloy MTB stem ,0-degree rise ,No gap faceplate ,Stainless hardware ,Blind bolt holes for less sharp edges ,Available in 35mm, 50mm, 65mm lengths ,31.8mm or 35mm Handlebar Clamp Diameter ,Combine with ENVE M6 or M7 carbon bars for a complete MTB cockpit.
What it isAn exceptionally strong carbon fibre 35mm riser bar, that’s built to descend. It is available in 10, 25 and 40mm rise options.Why we made itGravity riding demands a wide and stiff platform for control and instant response, but not so stiff that it punishes hands and arms on long, rough descents. Our 35mm clamp diameter mountain bar combines the DNA of our famous DH bar and the smooth aesthetics of our classic riser for a best-in-class ride experience.Full detailsThe M7 bar is our 35mm bar for the most aggressive and demanding riders. Carbon fibre is the ideal material for a gravity bar because fibre orientation and bar shape can be controlled independently and developed in unison, resulting in a tuned flex profile that cannot be achieved with aluminium. This bar is tuned to be precise and responsive while absorbing fatigue-inducing chatter and taking the sting out of the biggest hits. Available in a 10mm, 25mm, or 40mm rise, the M7 bar features a trail-perfect 8° sweep and 4° tip for your long-travel 29er, enduro race bike, or downhill machine.
What it isA race proven downhill handlebar, available in 30 and 50mm rise options.Why we made itWe built this bar to win downhill races. Over and over again, this bar has delivered confidence and control on the world’s toughest tracks. In fact, these handlebars have frequented the World Cup podium over 75 times in the last eight years. Developed with the fastest riders, and validated at the highest level, the winningest carbon DH bar is also available in two rise options to ensure your preferred fit can be achieved.Full detailsThe M9 bar is our dedicated downhill option. Designed around a 31.8mm clamp diameter and our downhill-focused flex profile, this bar’s celebrated ride feel defined the potential of a DH carbon fibre bar and realigned performance expectations. Refined for 2018, the new M9 bar is offered with a 30mm or 50mm rise and features 8° sweep and 4° tip angles. The 50mm rise M9 handlebar has a 70mm-wide clamping zone; the 30mm rise bar has a 55mm clamping zone.