The ENVE Foundation AG25 Gravel Wheelset is designed for everything from bike packing to gravel racing. “AG” stands for “Adventure Gravel” and this is the guiding principle behind the AG25. Part of ENVE’s new Foundation collection, the AG25 brings ENVE’s core technologies and trickle-down features from the ENVE G Series to riders seeking out adventure and ultimately looking to ride for the fun of it. The AG25 is a 700c gravel wheel that can take tyres up to 50mm, responding perfectly to the larger clearances of modern gravel and adventure bikes. The rim shape was developed by ENVE that would smooth out the ride while still delivering a confidence-inspiring feel when it comes to handling. The AG25 uses ENVE’s Wide Hookless Bead to minimise the chance of pinch flats. The wider leading edge of the rim disperses any impact from debris or potholes over a wider area. This leads to a 60+% improvement in pinch flat resistance as well as a 30+% improvement in impact strength. Drilled spoke and valve holes mean the carbon fibres in the AG25 run through the wheel uninterrupted as opposed to being cut. This makes for a stronger, lighter rim structure. Another benefit is that ENVE can control the shape of the rim at the spoke/nipple interface with greater precision. ENVE rims feature a conical nipple seat that prevents premature spoke fatigue while also ensuring wheel-build reliability. The AG25 uses the ENVE Foundation Road Hub, which uses ENVE’s core hub technologies. The hub shell uses simplified machining without compromising flange geometry and wheel build stiffness. The drive mechanism uses Instant Drive 360 technology and a 40t ratchet to deliver responsive engagement, minimal drag, and low maintenance performance. The bearings are premium full contact sealed NTN steel bearings. The Rotor attachment is center lock. The AG25 is also available with the Industry 1/1 hub. The ENVE Foundation AG25 Gravel Wheelset comes with ENVE's leading Factory Limited Warranty and Incidental Damage Protection. The Factory Limited Warranty protects buyers for five years from defects in material and workmanship, while the Incidental Damage Protection gives protection from damage caused to their wheels while riding, crashing or transporting bikes. Beyond these three years, there is a prorated discount structure available.
The ENVE Foundation AG25 Gravel Wheelset is designed for everything from bike packing to gravel racing. “AG” stands for “Adventure Gravel” and this is the guiding principle behind the AG25. Part of ENVE’s new Foundation collection, the AG25 brings ENVE’s core technologies and trickle-down features from the ENVE G Series to riders seeking out adventure and ultimately looking to ride for the fun of it. The AG25 is a 700c gravel wheel that can take tyres up to 50mm, responding perfectly to the larger clearances of modern gravel and adventure bikes. The rim shape was developed by ENVE that would smooth out the ride while still delivering a confidence-inspiring feel when it comes to handling. The AG25 uses ENVE’s Wide Hookless Bead to minimise the chance of pinch flats. The wider leading edge of the rim disperses any impact from debris or potholes over a wider area. This leads to a 60+% improvement in pinch flat resistance as well as a 30+% improvement in impact strength. Drilled spoke and valve holes mean the carbon fibres in the AG25 run through the wheel uninterrupted as opposed to being cut. This makes for a stronger, lighter rim structure. Another benefit is that ENVE can control the shape of the rim at the spoke/nipple interface with greater precision. ENVE rims feature a conical nipple seat that prevents premature spoke fatigue while also ensuring wheel-build reliability. The AG25 uses the ENVE Foundation Road Hub, which uses ENVE’s core hub technologies. The hub shell uses simplified machining without compromising flange geometry and wheel build stiffness. The drive mechanism uses Instant Drive 360 technology and a 40t ratchet to deliver responsive engagement, minimal drag, and low maintenance performance. The bearings are premium full contact sealed NTN steel bearings. The Rotor attachment is center lock. The AG25 is also available with the Industry 1/1 hub. The ENVE Foundation AG25 Gravel Wheelset comes with ENVE's leading Factory Limited Warranty and Incidental Damage Protection. The Factory Limited Warranty protects buyers for five years from defects in material and workmanship, while the Incidental Damage Protection gives protection from damage caused to their wheels while riding, crashing or transporting bikes. Beyond these three years, there is a prorated discount structure available.
Carbon-built for an extremely durable and lightweight performance, this 43.5mm wide rim has no issue with running you up, over and back down every hill with pace, poise and purpose. Optimised for use with tyres as wide as 2.8", the M635 makes the most of every run, with its large surface contact area and vertical compliance guaranteeing a stable and steady run, no matter the terrain. Offering unrivalled traction and rolling prowess, this tubeless ready titan is the perfect pick for every All Mountain endeavour. Technologies: Application Specific Design: Each rim and wheel model in the ENVE M Series is designed specifically to provide exceptional performance for the intended riding experience. The M Series (M5, M6, M7 and M9) follow the optimised descend and climb performance outputs that have been refined to ensure you are selecting the correct rim for your intended riding style and to get the best performance from the model you need. Hole Count: The spoke hole counts have been considered on the construction of the ENVE M Series rims to ensure that strength, weight and lateral stiffness are optimised to ensure performance-output is as high as it can be. For example, the M5 series is a Cross Country orientated rim, which features 24 spokes holes to save weight without negating structural strength in any way. On the flip-side, the M7 and M9 series are intended for Enduro and Downhill where rapid, consistent rim abuse over demanding terrain is the basis of the riding style, these rims have 32 spoke holes. Full Carbon Laminate: Using 100% unidirectional carbon fibre, the best and highest-quality materials, ENVE constructions deliver the highest level of performance. Suited for use anywhere on the road or mountain. This high-end carbon construction provides a super-stiff, flex-free construction that is impact resistant, compliant and perfectly suited to meet and surpass the demands of modern cycling. Protective Rim Strip: This Rim Strip provides increased tubeless performance, eliminating the need to reinforce rims with air-sealing rim tape. This tape provides a protective buffer between the rim and the trail, while also providing superior snake-bite/pinch-flat protection should you prefer to ride using tubes.
ENVE Foundation Tubeless Tyre KitThis tubeless kit is specifically designed for use with ENVE Foundation wheelsets. This makes it ideal for riders who already have a tubeless-compatible wheelset and would like to refresh their set-up for box-fresh performance.Compatibility65mm Option: This option is designed for ENVE Foundation 65 road bike wheelsets.45mm Option: This option is designed for ENVE Foundation 45 road bike wheelsets.AM30 Option: This option is designed for ENVE Foundation AM30 mountain bike wheelsets.What's IncludedA tubeless kit needs to be simple and functional and this is ENVE's solution. Tape is cut specifically to rim widths to ensure a proper fit, tubeless valves feature removable cores for easy sealant refresh, and a valve core removal tool is included. The tape roll has enough tape for three wheels.Please Note: These kits aren't meant to convert a non-tubeless wheelset to tubeless and should only be used to refresh an already tubeless-compatible wheel.Features: Use: Road, Gravel and MTB Included: Tubeless tape, tubeless valves with removable cores and a valve core removal tool Tape Length: There is enough tape for three wheels Compatibility: Multiple options available to select Manufacturer's Part Numbers: 65mm: EN72031065; 45mm: EN72031045; AM30: EN72030AM30Buy ENVE Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
ENVE Foundation Tubeless Tyre KitThis tubeless kit is specifically designed for use with ENVE Foundation wheelsets. This makes it ideal for riders who already have a tubeless-compatible wheelset and would like to refresh their set-up for box-fresh performance.Compatibility65mm Option: This option is designed for ENVE Foundation 65 road bike wheelsets.45mm Option: This option is designed for ENVE Foundation 45 road bike wheelsets.AM30 Option: This option is designed for ENVE Foundation AM30 mountain bike wheelsets.What's IncludedA tubeless kit needs to be simple and functional and this is ENVE's solution. Tape is cut specifically to rim widths to ensure a proper fit, tubeless valves feature removable cores for easy sealant refresh, and a valve core removal tool is included. The tape roll has enough tape for three wheels.Please Note: These kits aren't meant to convert a non-tubeless wheelset to tubeless and should only be used to refresh an already tubeless-compatible wheel.Features: Use: Road, Gravel and MTB Included: Tubeless tape, tubeless valves with removable cores and a valve core removal tool Tape Length: There is enough tape for three wheels Compatibility: Multiple options available to select Manufacturer's Part Numbers: 65mm: EN72031065; 45mm: EN72031045; AM30: EN72030AM30Buy ENVE Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
ENVE Foundation Tubeless Tyre KitThis tubeless kit is specifically designed for use with ENVE Foundation wheelsets. This makes it ideal for riders who already have a tubeless-compatible wheelset and would like to refresh their set-up for box-fresh performance.Compatibility65mm Option: This option is designed for ENVE Foundation 65 road bike wheelsets.45mm Option: This option is designed for ENVE Foundation 45 road bike wheelsets.AM30 Option: This option is designed for ENVE Foundation AM30 mountain bike wheelsets.What's IncludedA tubeless kit needs to be simple and functional and this is ENVE's solution. Tape is cut specifically to rim widths to ensure a proper fit, tubeless valves feature removable cores for easy sealant refresh, and a valve core removal tool is included. The tape roll has enough tape for three wheels.Please Note: These kits aren't meant to convert a non-tubeless wheelset to tubeless and should only be used to refresh an already tubeless-compatible wheel.Features: Use: Road, Gravel and MTB Included: Tubeless tape, tubeless valves with removable cores and a valve core removal tool Tape Length: There is enough tape for three wheels Compatibility: Multiple options available to select Manufacturer's Part Numbers: 65mm: EN72031065; 45mm: EN72031045; AM30: EN72030AM30Buy ENVE Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
ENVE Presta Valve Extender SetCreated by Silca for ENVE, this set of valve extenders is developed to offer easy inflation, whatever the depth of your wheels. Sold as a pair, these valve extenders are suitable for tubes and tubular tyres with removable valve cores.CompatibilityThe 34mm set is optimised for the ENVE SES 3.4 and ENVE SES 3.4 Disc wheelsets.The 45mm set is optimised for the ENVE SES 4.5 and ENVE SES 5.6 Disc wheelsets.The 75mm set is optimised for the ENVE SES 7.8 and ENVE SES 7.8 Disc wheelsets.ENVE recommends that the length of your tyre/tube valve plus the length of your extender exceeds the depth of the rim by at least 10mm. Suitable for all road, triathlon, gravel and cyclocross riders using any ENVE tubular or non-tubeless clincher rim with stock valves shorter than the rim depth. Not suitable for tubeless setups.Features: Use: Road, Triathlon, Gravel and Cyclocross Length: Multiple options available to select Single or Pair: Pair Manufacturer's Part Numbers: 75mm: EN73000275l; 45mm: EN73000245 and 34mm: EN73000234Buy ENVE Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
ENVE Pressure Relief Presta Valve Stem NutsThese valve stem nuts come as a pack of two and are specifically designed to ensure that an improper tubeless tape set-up doesn't result in a damaged rim. If the tubeless seal between your tyre's air chamber and the rim's cavity is breached, the rim's cavity can become pressurised resulting in a pressurised rim and potential delamination of the rim's sidewall. These pressure relief valve stem nuts prevent this from happening by creating an escape for the air via fluted reliefs on the inner diameter of the nut. Air escaping from these ports, indicates a compromised tubeless seal.Recommended for all tubeless ENVE SES wheelsets as well as other brand road tubeless wheelsets.Features: Use: Road Size: Comes as a pack of two Manufacturer's Part Numbers: EN7201012Buy ENVE Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
ENVE Foundation 45mm Carbon Road WheelsetThis versatile road bike wheelset features a reliable carbon fibre construction, which makes it incredibly stiff when climbing as well as lightweight when descending. Perfect for racing, this wheelset's shape is both drag-taming and crosswind defying as it takes its design from the top of range SES model. This makes it a great choice of upgrade for modern, multi-purpose road cycling plus, its rim width and anti-pinch flat technology ensures that higher volume tubeless road tyres can be added for greater stability, strength and an incredibly low weight.Built upon over a decade of carbon wheel crafting experience, the Foundation 45 brings ENVE's knowledge and technology to the masses. Blended aero properties, tubeless compatibility, and pinch flat protection for the rider looking to test the waters on carbon wheel performance. ENVE Worthy, and priced to provide the foundation for confident riding through performance-crafted carbon in the US. Ideal for cyclists and triathletes looking to move into the world of carbon. Aerodynamics are an unalienable right for road cyclists and triathletes that allows for greater efficiency and confidence-inspiring handling, regardless of wind conditions. With more than a decade's experience in developing some of the world's fastest wheels, ENVE are uniquely qualified to deliver best-in-class aerodynamics to the Foundation customer.Like ENVE's SES wheel family, the Foundation Collection and its ENVE 45 were tested and developed at the Mercedes Benz Formula One wind-tunnel to deliver best-in-class real-world aero performance. Unlike other wheel brands who only test isolated wheels at elite speeds of 30mph/48kph, ENVE develops and tests wheels in-frame at multiple speeds ranging from 20mph/32kph to 30mph/48kph. This testing, while more time consuming and expensive, ensures that the ENVE 45 delivers performance advantages to riders of all abilities.Tubeless for the WinTubeless is the future and the future is now. The benefits of road tubeless are as follows:• Lower rolling resistance: By eliminating the inner-tube, the friction between tyre and tube is also eliminated, allowing the tyre roll, flex, and conform to the road with greater efficiency.• Flat less, ride more: Flat tyres are a buzz-kill. With a little sealant you can eliminate nearly all flats that would have been caused by an intrusive thorn or piece of debris.• Run the Best Pressure: Tubeless means you can run the pressure you want to maximize comfort, traction, and rolling efficiency. • Hookless/Straight-Sidewall Design: Tubeless performance depends on the tire maintaining a light press-fit with the rim on the bead seat diameter. ENVE chooses a hookless tubeless rim profile as it allows the rim's critical tolerance at the bead seat diameter to be both consistent and accurate. In short, hookless is chosen to deliver a more safe, reliable, and ultimately proper tyre fitment.The ENVE 45 is optimised for use with tubeless tyres greater than 25mm wide. Features: Rim Material: Carbon Fibre Inner Rim Width: 21mm External Rim Width: 28mm Rim Depth: 45mm Rim Type: Clincher Tyre Compatibility: Tubeless 25c or larger Use: Road Bead: Wide Hookless Bead provides pot-hole protection Tubeless: Yes, Tubeless Optimised for rolling fast and fewer flats Hole Count: 24 Effective Rim Diameter: 568 Aero Optimised Tyre Size: 25-28c Spoke Type: Sapim CX Sprint Spoke Cross: 2x Freehub: Multiple options available to select separately Axle: Front: 100x12; Rear: 142x12 Single or Pair: Pair Included: 2x valve stems, 1x roll of tape (good for taping 3 wheels), 2x Pressure Relief Valve Stem Nuts and Wheel Manual and Wheelbuild Card Part Numbers: SRAM XD: EN00F451003114002; Shimano: EN00F451003114001 Weight: SRAM XD Option: 1541g; Shimano Option: 1561gTechnologies: Learning from the Best: To achieve the low drag and high stability performance the ENVE 45 offers, ENVE takes cues from its top of the line SES line up. This trickle-down approach from ENVE's top-of-the-line products means the ENVE 45's outperform, or perform similar to, competitor's wheels that are upmarket in price. Wide, Hookless Bead Teachnology: Featuring ENVE's Wide Hookless Bead technology, the ENVE 45 disperses any impact from pot holes, curbs and debris over a wide area, reducing the likelihood of pinch flats. Potholes and unforeseen impacts are part of life, but that doesn't mean they need to ruin your ride. The ENVE 45 features ENVE's patent pending Wide Hookless Bead which is a design element at the leading edge of the rim that dissipates impact energy and reduces the likelihood of pinch flatting your tubed or tubeless tyre. Patented Technology: Patented Molded Spoke and Valve Stem Hole Technology results in rims that are light and strong. Because carbon fibre gets its strength from continuous fibres, ENVE routes the fibres around the hole without cutting them which increases the strength of each spoke hole. ENVE's patented process of moulding spoke and valve stem holes results in rims that are stronger and lighter. Because carbon fibre gets its strength from continuous fibres, ENVE routes the fibres around the hole without cutting them, increasing the strength of each spoke hole. This technique pays large dividends in the final product by allowing for a lighter spoke face while improving rim strength. Because of this process, our spoke holes are capable of maintaining higher spoke tensions, greatly reducing the risk of spoke pull-through and the need to constantly true your wheels. Strong, light and maintenance-free. ENVE Foundation Road Hub: The ENVE Foundation Road Hub features ENVE's core hub technologies. The hub shell uses simplified machining without compromising flange geometry and wheel build stiffness. The drive mechanism uses Instant Drive 360 technology and a 40t ratchet to deliver responsive engagement, minimal drag, and low maintenance performance. The bearings are premium full contact sealed NTN steel bearings. The Rotor attachment is centre-lock. ENVE Has You Covered: The Foundation 45mm Wheelset comes with ENVE's leading Lifetime Incident Protection and 5 Year warranty. The 5 Year Warranty protects buyers from defects in material and workmanship. The Lifetime Incident Protection program protects owners from damage caused to their wheels while riding, crashing, or transporting their bikes.Buy ENVE Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
ENVE Foundation 45mm Carbon Road WheelsetThis versatile road bike wheelset features a reliable carbon fibre construction, which makes it incredibly stiff when climbing as well as lightweight when descending. Perfect for racing, this wheelset's shape is both drag-taming and crosswind defying as it takes its design from the top of range SES model. This makes it a great choice of upgrade for modern, multi-purpose road cycling plus, its rim width and anti-pinch flat technology ensures that higher volume tubeless road tyres can be added for greater stability, strength and an incredibly low weight.Built upon over a decade of carbon wheel crafting experience, the Foundation 45 brings ENVE's knowledge and technology to the masses. Blended aero properties, tubeless compatibility, and pinch flat protection for the rider looking to test the waters on carbon wheel performance. ENVE Worthy, and priced to provide the foundation for confident riding through performance-crafted carbon in the US. Ideal for cyclists and triathletes looking to move into the world of carbon. Aerodynamics are an unalienable right for road cyclists and triathletes that allows for greater efficiency and confidence-inspiring handling, regardless of wind conditions. With more than a decade's experience in developing some of the world's fastest wheels, ENVE are uniquely qualified to deliver best-in-class aerodynamics to the Foundation customer.Like ENVE's SES wheel family, the Foundation Collection and its ENVE 45 were tested and developed at the Mercedes Benz Formula One wind-tunnel to deliver best-in-class real-world aero performance. Unlike other wheel brands who only test isolated wheels at elite speeds of 30mph/48kph, ENVE develops and tests wheels in-frame at multiple speeds ranging from 20mph/32kph to 30mph/48kph. This testing, while more time consuming and expensive, ensures that the ENVE 45 delivers performance advantages to riders of all abilities.Tubeless for the WinTubeless is the future and the future is now. The benefits of road tubeless are as follows:• Lower rolling resistance: By eliminating the inner-tube, the friction between tyre and tube is also eliminated, allowing the tyre roll, flex, and conform to the road with greater efficiency.• Flat less, ride more: Flat tyres are a buzz-kill. With a little sealant you can eliminate nearly all flats that would have been caused by an intrusive thorn or piece of debris.• Run the Best Pressure: Tubeless means you can run the pressure you want to maximize comfort, traction, and rolling efficiency. • Hookless/Straight-Sidewall Design: Tubeless performance depends on the tire maintaining a light press-fit with the rim on the bead seat diameter. ENVE chooses a hookless tubeless rim profile as it allows the rim's critical tolerance at the bead seat diameter to be both consistent and accurate. In short, hookless is chosen to deliver a more safe, reliable, and ultimately proper tyre fitment.The ENVE 45 is optimised for use with tubeless tyres greater than 25mm wide. Features: Rim Material: Carbon Fibre Inner Rim Width: 21mm External Rim Width: 28mm Rim Depth: 45mm Rim Type: Clincher Tyre Compatibility: Tubeless 25c or larger Use: Road Bead: Wide Hookless Bead provides pot-hole protection Tubeless: Yes, Tubeless Optimised for rolling fast and fewer flats Hole Count: 24 Effective Rim Diameter: 568 Aero Optimised Tyre Size: 25-28c Spoke Type: Sapim CX Sprint Spoke Cross: 2x Freehub: Multiple options available to select separately Axle: Front: 100x12; Rear: 142x12 Single or Pair: Pair Included: 2x valve stems, 1x roll of tape (good for taping 3 wheels), 2x Pressure Relief Valve Stem Nuts and Wheel Manual and Wheelbuild Card Part Numbers: SRAM XD: EN00F451003114002; Shimano: EN00F451003114001 Weight: SRAM XD Option: 1541g; Shimano Option: 1561gTechnologies: Learning from the Best: To achieve the low drag and high stability performance the ENVE 45 offers, ENVE takes cues from its top of the line SES line up. This trickle-down approach from ENVE's top-of-the-line products means the ENVE 45's outperform, or perform similar to, competitor's wheels that are upmarket in price. Wide, Hookless Bead Teachnology: Featuring ENVE's Wide Hookless Bead technology, the ENVE 45 disperses any impact from pot holes, curbs and debris over a wide area, reducing the likelihood of pinch flats. Potholes and unforeseen impacts are part of life, but that doesn't mean they need to ruin your ride. The ENVE 45 features ENVE's patent pending Wide Hookless Bead which is a design element at the leading edge of the rim that dissipates impact energy and reduces the likelihood of pinch flatting your tubed or tubeless tyre. Patented Technology: Patented Molded Spoke and Valve Stem Hole Technology results in rims that are light and strong. Because carbon fibre gets its strength from continuous fibres, ENVE routes the fibres around the hole without cutting them which increases the strength of each spoke hole. ENVE's patented process of moulding spoke and valve stem holes results in rims that are stronger and lighter. Because carbon fibre gets its strength from continuous fibres, ENVE routes the fibres around the hole without cutting them, increasing the strength of each spoke hole. This technique pays large dividends in the final product by allowing for a lighter spoke face while improving rim strength. Because of this process, our spoke holes are capable of maintaining higher spoke tensions, greatly reducing the risk of spoke pull-through and the need to constantly true your wheels. Strong, light and maintenance-free. ENVE Foundation Road Hub: The ENVE Foundation Road Hub features ENVE's core hub technologies. The hub shell uses simplified machining without compromising flange geometry and wheel build stiffness. The drive mechanism uses Instant Drive 360 technology and a 40t ratchet to deliver responsive engagement, minimal drag, and low maintenance performance. The bearings are premium full contact sealed NTN steel bearings. The Rotor attachment is centre-lock. ENVE Has You Covered: The Foundation 45mm Wheelset comes with ENVE's leading Lifetime Incident Protection and 5 Year warranty. The 5 Year Warranty protects buyers from defects in material and workmanship. The Lifetime Incident Protection program protects owners from damage caused to their wheels while riding, crashing, or transporting their bikes.Buy ENVE Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
ENVE Foundation 65mm Carbon Road WheelsetThis race-ready road bike wheelset features a dependable carbon fibre construction, which makes it incredibly stiff when climbing and lightweight when descending. ENVE has also equipped this versatile model with a rim design that achieves low drag and high stability, so you can benefit from its trickle-down technologies that are normally only seen on the top-of-the-line SES series. One final highlight is this wheelset's wide hookless bead technology, which disperses impact from potholes, curbs and debris over a wide area. This reduces the likelihood of pinch flats and adds to a more confidence-inspiring ride. Whether you're training or competing, this wheelset is engineered for maximum performance.Features: Rim Material: Carbon Fibre, Centrelock rotor mount Inner Rim Width: 21mm External Rim Width: 28mm Rim Depth: 65mm Rim Type: Clincher Brake Compatibility: Disc brake Use: Road Hole Count: 24 Axle: Front: 12x100 Thru-Axle; Rear: 12x142 Thru-Axle Freehub: Multiple options available to select Spokes: Sapim CX Sprint Single or Pair: Pair Included: Tubeless Kit 2x valve stems, 1x roll of tape (good for taping 3 wheels), 2x Pressure Relief Valve Stem Nuts, Accessory Bag, Wheel Manual and Wheelbuild Card Wheelset Weight: 1641g (Pair)Technologies: Learning From The Best: To achieve the low drag and high stability performance the ENVE 65 offers, ENVE takes cues from its top of the line SES line up. This trickle down approach from ENVE's top-of-the-line products means the ENVE 65's outperform, or perform similar to, competitor's wheels that are upmarket in price. Wide Hookless Bead Technology: Featuring ENVE's Wide Hookless Bead technology, the ENVE 65 disperses any impact from pot holes, curbs and debris over a wide area, reducing the likelihood of pinch flats. Patented Technology: Patented Moulded Spoke and Valve Stem Hole Technology results in rims that are light and strong. Because carbon fibre gets its strength from continuous fibres, ENVE routes the fibres around the hole without cutting them which increases the strength of each spoke hole. ENVE Foundation Road Hub: The ENVE Foundation Road Hub features ENVE's core hub technologies. The hub shell uses simplified machining without compromising flange geometry and wheel build stiffness. The drive mechanism uses Instant Drive 360 technology and a 40t ratchet to deliver responsive engagement, minimal drag, and low maintenance performance. The bearings are premium full contact sealed NTN steel bearings. The Rotor attachment is centre-lock. ENVE Has You Covered: The Foundation 65mm Wheelset comes with ENVE's leading Lifetime Incident Protection and 5 Year warranty. The 5 Year Warranty protects buyers from defects in material and workmanship. The Lifetime Incident Protection program protects owners from damage caused to their wheels while riding, crashing, or transporting their bikes.Buy ENVE Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
ENVE Foundation 65mm Carbon Road WheelsetThis race-ready road bike wheelset features a dependable carbon fibre construction, which makes it incredibly stiff when climbing and lightweight when descending. ENVE has also equipped this versatile model with a rim design that achieves low drag and high stability, so you can benefit from its trickle-down technologies that are normally only seen on the top-of-the-line SES series. One final highlight is this wheelset's wide hookless bead technology, which disperses impact from potholes, curbs and debris over a wide area. This reduces the likelihood of pinch flats and adds to a more confidence-inspiring ride. Whether you're training or competing, this wheelset is engineered for maximum performance.Features: Rim Material: Carbon Fibre, Centrelock rotor mount Inner Rim Width: 21mm External Rim Width: 28mm Rim Depth: 65mm Rim Type: Clincher Brake Compatibility: Disc brake Use: Road Hole Count: 24 Axle: Front: 12x100 Thru-Axle; Rear: 12x142 Thru-Axle Freehub: Multiple options available to select Spokes: Sapim CX Sprint Single or Pair: Pair Included: Tubeless Kit 2x valve stems, 1x roll of tape (good for taping 3 wheels), 2x Pressure Relief Valve Stem Nuts, Accessory Bag, Wheel Manual and Wheelbuild Card Wheelset Weight: 1641g (Pair)Technologies: Learning From The Best: To achieve the low drag and high stability performance the ENVE 65 offers, ENVE takes cues from its top of the line SES line up. This trickle down approach from ENVE's top-of-the-line products means the ENVE 65's outperform, or perform similar to, competitor's wheels that are upmarket in price. Wide Hookless Bead Technology: Featuring ENVE's Wide Hookless Bead technology, the ENVE 65 disperses any impact from pot holes, curbs and debris over a wide area, reducing the likelihood of pinch flats. Patented Technology: Patented Moulded Spoke and Valve Stem Hole Technology results in rims that are light and strong. Because carbon fibre gets its strength from continuous fibres, ENVE routes the fibres around the hole without cutting them which increases the strength of each spoke hole. ENVE Foundation Road Hub: The ENVE Foundation Road Hub features ENVE's core hub technologies. The hub shell uses simplified machining without compromising flange geometry and wheel build stiffness. The drive mechanism uses Instant Drive 360 technology and a 40t ratchet to deliver responsive engagement, minimal drag, and low maintenance performance. The bearings are premium full contact sealed NTN steel bearings. The Rotor attachment is centre-lock. ENVE Has You Covered: The Foundation 65mm Wheelset comes with ENVE's leading Lifetime Incident Protection and 5 Year warranty. The 5 Year Warranty protects buyers from defects in material and workmanship. The Lifetime Incident Protection program protects owners from damage caused to their wheels while riding, crashing, or transporting their bikes.Buy ENVE Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
ENVE M635 Carbon MTB RimThe ENVE M635 Carbon MTB Rim is the ultimate, all-around mountain bike rim design. Satisfying and rising above the demands of the modern era of mountain bike riding with a wider rim width than the M630, for use with tyres up to 2.8" in width. Even More Grip, Traction and Rolling PerformanceThis internally wide rim ensures traction, rolling performance, tubeless excellence, stiffness and lightweight performance are as great as they can be. The M635 is designed to provide the perfect tyre profile with tyres between 2.5" and 2.8" where they are ready to tackle any obstacle or challenge you can throw at them. The wider rim width provides additional traction, grip and rolling performance.Ready for Anything, Lightweight, Stiff and StrongThe M635 rim is perfect for many areas of mountain bike riding; it is a true all-rounder and is ready for anything. Should you require a lightweight wheel for your trail bike, but still needs to be able to tackle the roughest of terrain, a high-mileage adventure cyclist, the alpine epic explorer or the weekend warrior, this rim is designed to outperform anything you can imagine and anything else available on the market.Features: Material: 100% Unidirectional Carbon Fibre Use: Trail Recommended Suspension Travel: 100 - 160mm Rim Depth: 26.5mm Rim Width Internal: 35mm Rim Width External: 43.5mm Spoke Hole Count: 28 Recommended Tyre Width: 2.5 - 2.8" Weight: 414gTechnologies: Application Specific Design: Each rim and wheel model in the ENVE M Series is designed specifically to provide exceptional performance for the intended riding experience. The M Series (M5, M6, M7 and M9) follow the optimised descend and climb performance outputs that have been refined to ensure you are selecting the correct rim for your intended riding style and to get the best performance from the model you need. Hole Count: The spoke hole counts have been considered on the construction of the ENVE M Series rims to ensure that strength, weight and lateral stiffness are optimised to ensure performance-output is as high as it can be. For example, the M5 series is a Cross Country orientated rim, which features 24 spokes holes to save weight without negating structural strength in any way. On the flip-side, the M7 and M9 series are intended for Enduro and Downhill where rapid, consistent rim abuse over demanding terrain is the basis of the riding style, these rims have 32 spoke holes. Full Carbon Laminate: Using 100% unidirectional carbon fibre, the best and highest-quality materials, ENVE constructions deliver the highest level of performance. Suited for use anywhere on the road or mountain. This high-end carbon construction provides a super-stiff, flex-free construction that is impact resistant, compliant and perfectly suited to meet and surpass the demands of modern cycling. Protective Rim Strip: This Rim Strip provides increased tubeless performance, eliminating the need to reinforce rims with air-sealing rim tape. This tape provides a protective buffer between the rim and the trail, while also providing superior snake-bite/pinch-flat protection should you prefer to ride using tubes.Buy ENVE Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
ENVE M730 Carbon MTB Rims with Pro 4 HubsFor durability without compromising speed, ENVE's M730 MTB rims are the perfect solution for anyone looking to the future of Enduro and All Mountain riding. With a rim 27mm and 38mm wide, expect to utilise excellent aerodynamics and traction even on climbs with an effective ride smoothness to boot. Additionally, with ENVE's Protective Rim Strip technology, feel comfortable optimising your tyre pressure without risking damage to the rim, freeing you to perform even at super-low pressures.Complete with Durable Pro 4 HubsBuilt for durability, these alloy hubs use a 44-tooth drive mechanic to allow for excellent power transfer while also remaining lightweight, so you can press your advantage even further on the track knowing you'll get just energy back as you put in.Features: Material: 100% Unidirectional Carbon Fibre Use: Enduro, All Mountain Recommended Suspension Travel: 130 - 180mm Rim Depth: 27mm Rim Width Internal: 30mm Rim Width External: 38mm Spoke Hole Count: 32 Recommended Tyre Width: 2.3 - 2.5" Weight: 552g (each)Technologies: Application Specific Design: Each rim and wheel model in the ENVE M Series is designed specifically to provide exceptional performance for the intended riding experience. The M Series (M5, M6, M7 and M9) follow the optimised descend and climb performance outputs that have been refined to ensure you are selecting the correct rim for your intended riding style and to get the best performance from the model you need. Hole Count: The spoke hole counts have been considered on the construction of the ENVE M Series rims to ensure that strength, weight and lateral stiffness are optimised to ensure performance-output is as high as it can be. For example, the M5 series is a Cross Country orientated rim, which features 24 spokes holes to save weight without negating structural strength in any way. On the flip-side, the M7 and M9 series are intended for Enduro and Downhill where rapid, consistent rim abuse over demanding terrain is the basis of the riding style, these rims have 32 spoke holes. Full Carbon Laminate: Using 100% unidirectional carbon fibre, the best and highest-quality materials, ENVE constructions deliver the highest level of performance. Suited for use anywhere on the road or mountain. This high-end carbon construction provides a super-stiff, flex-free construction that is impact resistant, compliant and perfectly suited to meet and surpass the demands of modern cycling. Protective Rim Strip: This Rim Strip provides increased tubeless performance, eliminating the need to reinforce rims with air-sealing rim tape. This tape provides a protective buffer between the rim and the trail, while also providing superior snake-bite/pinch-flat protection should you prefer to ride using tubes.Buy ENVE Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
ENVE M735 Carbon MTB Rims with Pro 4 HubsIncredible strong and built to last, ENVE's M735 rims are a wider iteration of the M730 model that offers even greater traction and stability on the track. With a deep 27mm profile and a 100% UD carbon material, these rims offer brilliant aerodynamics for speed build-up while remaining lightweight to allow you to ascend and descend with maximum control. Plus, with ENVE's Protective Rim Strip technology, dare to choose a wider range of tire pressures without risking damage to the rim.Optimised with Pro 4 HubsThese rims come complete with a set of Pro 4 Hubs, each designed for durability while also offering excellent power transfer so that you get the most out of each pedal.Features: Material: 100% Unidirectional Carbon Fibre Use: Enduro, All Mountain Recommended Suspension Travel: 130 - 180mm Rim Depth: 27mm Rim Width Internal: 35mm Rim Width External: 41mm Spoke Hole Count: 32 Recommended Tyre Width: 2.5 - 2.8" Weight: 558g (each)Technologies: Application Specific Design: Each rim and wheel model in the ENVE M Series is designed specifically to provide exceptional performance for the intended riding experience. The M Series (M5, M6, M7 and M9) follow the optimised descend and climb performance outputs that have been refined to ensure you are selecting the correct rim for your intended riding style and to get the best performance from the model you need. Hole Count: The spoke hole counts have been considered on the construction of the ENVE M Series rims to ensure that strength, weight and lateral stiffness are optimised to ensure performance-output is as high as it can be. For example, the M5 series is a Cross Country orientated rim, which features 24 spokes holes to save weight without negating structural strength in any way. On the flip-side, the M7 and M9 series are intended for Enduro and Downhill where rapid, consistent rim abuse over demanding terrain is the basis of the riding style, these rims have 32 spoke holes. Full Carbon Laminate: Using 100% unidirectional carbon fibre, the best and highest-quality materials, ENVE constructions deliver the highest level of performance. Suited for use anywhere on the road or mountain. This high-end carbon construction provides a super-stiff, flex-free construction that is impact resistant, compliant and perfectly suited to meet and surpass the demands of modern cycling. Protective Rim Strip: This Rim Strip provides increased tubeless performance, eliminating the need to reinforce rims with air-sealing rim tape. This tape provides a protective buffer between the rim and the trail, while also providing superior snake-bite/pinch-flat protection should you prefer to ride using tubes.Buy ENVE Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Over the last year we have been focused on improving the performance and longevity of braking on our road rims. As a result we introduce the ENVE grey pad that better manages heat, minimizes abrasion, and performs in wet conditions. The ENVE grey pad will be supplied with all new wheel sets and available for purchase aftermarket as a composite specific brake pad.ENVE brake pads are sold in pairs 2 brake blocks for the use on one wheel you require 2 sets for a complete bike.
A lightweight, user-friendly full carbon seatpostFor Road, gravel, cyclocross, and mountain bike racers and enthusiastsA seat post should be installed, easily adjusted and perform, period. For this reason ENVE made one of their own. Lightweight, easily adjusted, strong and comfortable the ENVE Seatpost is equally at home on the trail as it is on the road.Material: Carbon FiberHardware Material: TitaniumSaddle Angle Adjustment: 0-27 degreesOffset: 0 mmLength: 400 mm
Light and super stiff, the ENVE stem is the perfect complement to our handlebars.The stem features titanium hardware, cold forged alloy face plate, and molded-in metallic threads.Every material was chosen to maximize its involvement in the overall performance.The handlebars, seat post and stem give the opportunity to have a complete cockpit that performs in perfect harmony.
A lightweight, user-friendly full carbon seatpostFor Road, gravel, cyclocross, and mountain bike racers and enthusiastsA seat post should be installed, easily adjusted and perform, period. For this reason ENVE made one of their own. Lightweight, easily adjusted, strong and comfortable the ENVE Seatpost is equally at home on the trail as it is on the road.Material: Carbon FiberHardware Material: TitaniumSaddle Angle Adjustment: 0-27 degreesOffset: 25 mmLength: 400 mm
The official ENVE tubless kit for your M Series MTB wheels features custom-cut tapes and valves for a flawless setup. This high quality, simple and functional solution is designed specifically for each M Series wheel rim width to ensure a millimetre-perfect fit. The tubeless valves feature removable cores so you can easily refresh the sealant when required. The kit is suitable for one pair of wheels.Rim Model - M525Valve Stem F/R - 47mm/47mm,Tape Width - 29mm,Tape Colour - Red.Rim Model - M630Valve Stem F/R - 47mm/47mm ,Tape Width - 34mm ,Tape Colour - Red.Rim Model - M635Valve Stem F/R - 47mm/47mm ,Tape Width - 38mm ,Tape Colour - Red.Rim Model - M60HV/M70/M90Valve Stem F/R - 47mm/47mm ,Tape Width - 29mm ,Tape Colour - Black.Rim Model - M70HVValve Stem F/R - 47mm/47mm ,Tape Width - 34mm ,Tape Colour - Black.