Enduro's Stainless Steel bearings feature the same specs as the popular ABEC 3 range, but with corrosion resistant 440 C stainless steel balls and races.Key Features: Bearing Code: S6900, Dimensions: 10mm x 22mm x 6mm, ABEC: 3, Grade: 10, Seals: 2RS, Grease: Mobile HP 222, Application: Hubs, Bottom Brackets, Weight: 9.40g.
The entry standard for Enduro bearings. Enduro’s ABEC 3 bearings offer improved quality and performance over ABEC 1 bearings fitted by many OE manufacturers. Only the finest cycling components come standard with Enduro’s ABEC 3 bearings. With hardened chromium steel races, balls, and tough riveted steel retainers, these bearings are durable and the perfect low cost performance upgrade. Bearing Code: MR 163110, Dimensions: 16 x 31 x 10mm, ABEC: 3, Grade: 10, Seals: LLB, Grease: Mobile HP 222, Application: Hubs, Bottom Brackets, Weight: 25.20g , .
MAX berings are designed without retainers and 40% more balls than standard ABEC 3 or 5 bearings. This enables them to carry a much higher load and makes them perfect for frame pivots. They are also packed with CRC Marine Grease, which will not wash out or break down when wet ensuring your frame bearings last even longer. Bearing Code: 6903 LLU MAX BO, Dimensions: 17 x 30 x 7mm, ABEC: 3, Grade: 10, Seals: LLU, Grease: CRC Marine, Application: Frame Pivots, Weight: 17.59g , .
The ABEC3 6804 LLU Max raises the bar for military standard, high precision bearings. This MAX model was engineered without retainers and 40% more balls than standard ABEC 3 or 5 bearings, enabling them to carry a much higher load and perfect for frame pivots. This bearing is packed with CRC Marine Grease, which will not wash out or break down when wet ensuring your frame bearings last longer than ever before. Technologies: LLU Seals: Two NBR 70 rubber seals with medium/high contact seal, which rides in a matching groove machined into the bearing to make a labyrinth type seal. The outer sealing lip repels dirt and water while the inner sealing lip retains the grease. CRC Sta-Plex Marine: This grease will not wash out or break down under any extreme conditions including power washing, salt water intrusion from the salted roads, or even dirt getting into the rolling areas. The High Pressure properties of this grease provides a cushion for the sharp blows that suspension pivots will endure. Tough and Tenacious for high impact and extreme conditions.
Enduro Bearings ABEC3 6804 LLU Max Bearing Optimised for use with cycling components, this MAX model has been built without retainers and contains 40% more balls than standard ABEC 3 or 5 bearings, enabling them to bear a far heavier load. Filled with CRC Marine Grease, a water-resistant and long-lasting performance is assured, especially when used with your frame pivots. Features: Dimensions: 20x32x7mm ABEC: 3 Grade: 10 Seals: LLU Grease: CRC-Marine Application: Frame Pivots Weight: 18.45g Buy Enduro Bearings Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
MAX berings are designed without retainers and 40% more balls than standard ABEC 3 or 5 bearings. This enables them to carry a much higher load and makes them perfect for frame pivots. They are also packed with CRC Marine Grease, which will not wash out or break down when wet ensuring your frame bearings last even longer.Key Features:Bearing Code: KP 6A,Dimensions: 3/8" x 7/8" x 5/16",ABEC: 3 ,Grade: 10,Seals: LLU,Grease: CRC Marine,Application: Frame Pivots,Weight: 9.69g.
Enduro Bearings SS 6902 2RS BearingFound on most common bike components, this superb SS model raises the bar for military-grade, high precision bearings. Built to the same specs as the popular ABEC 3 range, it features with corrosion resistant 440 C stainless steel balls and races for long-lasting and reliable performance. Features Dimensions: 15x28x7mm ABEC: 3 Grade: 10 Seals: 2RS Grease: Mobile HP 222 Application: Hubs, Bottom Brackets Weight: 15.73g Buy Enduro Bearings Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Enduro Bearings ABEC5 MR 17287 LLB A5 BearingBuilt to deal with the challenging and powerful movements of regular bike riding, this ABEC5 MR bearing raises the bar for military standard, high precision bearings. Constructed with hardened Grade 5 Chromium Steel Balls, and 52100 High-Carbon Chromium-Alloy mirror polished races, it can withstand tolerances twice as tight as ABEC 3, while working in a silent fashion. With a virtually frictionless movement and consistent lubrication from the Kyodo Yushi PS-2 grease, it works hard to maximise the life of the bearing. Features: Dimensions: 17x28x7mm ABEC: 5 Grade: 5 Seals: LLU Grease: Kyodo Yushi PS-2 Application: Hubs, Bottom Brackets Weight: 13.59g Buy Enduro Bearings Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Enduro's Stainless Steel bearings feature the same specs as the popular ABEC 3 range, but with corrosion resistant 440 C stainless steel balls and races.Key Features: Bearing Code: S6902, Dimensions: 15mm x 28mm x 7mm, ABEC: 3, Grade: 10, Seals: 2RS, Grease: Mobile HP 222, Application: Hubs, Bottom Brackets, Weight: 15.73g.
Enduro's Stainless Steel bearings feature the same specs as the popular ABEC 3 range, but with corrosion resistant 440 C stainless steel balls and races.Key Features: Bearing Code: S6001, Dimensions: 12mm x 28mm x 8mm, ABEC: 3, Grade: 10, Seals: 2RS, Grease: Mobile HP 222, Application: Hubs, Bottom Brackets, Weight: 19.28g.
The ABEC3 6806 LLU Max raises the bar for military standard, high precision bearings. This MAX model was engineered without retainers and 40% more balls than standard ABEC 3 or 5 bearings, enabling them to carry a much higher load and perfect for frame pivots. This bearing is packed with CRC Marine Grease, which will not wash out or break down when wet ensuring your frame bearings last longer than ever before. Technologies: LLB Seals: Two NBR 70 rubber seals with low contact seal, which rides in a matching groove machined into the bearing for low drag or friction. CRC Sta-Plex Marine: This grease will not wash out or break down under any extreme conditions including power washing, salt water intrusion from the salted roads, or even dirt getting into the rolling areas. The High Pressure properties of this grease provides a cushion for the sharp blows that suspension pivots will endure. Tough and Tenacious for high impact and extreme conditions.
The ABEC5 61803 SRS has been engineered to provide superior performance and value which is unrivalled in comparison to standard off-the-shelf bearings. Developed especially for cycling, this high-quality model boasts two rubber NBR SRS 70 seals with an axial face seal that features a large contact surface area, making it perfect for very smooth and free running. Thanks to its Kyodo Yushi PS-2 grease, this bearing benefits from high-speed properties and minimum rolling resistance.
Enduro Bearings ABEC3 6806 LLU Max BearingRaising the bar for military standard, high-precision bearings, this MAX model was engineered specifically for use with hard-riding bikes. Constructed without retainers and containing 40% more balls than standard ABEC 3 or 5 bearings, it easily bears a much higher load, making it ideal for use with frame pivots. Kept constantly lubricated with CRC Marine Grease, which will not wash out or break down when wet, it prolongs your frame bearing longevity for the most durable performance. Dimensions: 30x42x7mm ABEC: 3 Grade: 10 Seals: LLU Grease: CRC-Marine Application: Frame Pivots Weight: 25.71g Buy Enduro Bearings Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Enduro Bearings ABEC5 61803 SRS BearingThis rock-solid bearing is engineered to provide superior performance and value which is unrivalled in comparison to standard off-the-shelf bearings. Developed especially for cycling, this high-quality model uses two rubber NBR SRS 70 seals with an axial face seal and a large contact surface area for very smooth rotations. Thanks to its Kyodo Yushi PS-2 grease, this component benefits from high-speed properties and minimum rolling resistance.Features: Material: Steel Bearing Code: 6803 Dimensions: 17x26x5mm ABEC: 5 Grade: 5 Seals: SRS Grease: Kyodo Yushi PS-2 Application: Hubs, bottom bracketsWeight: 7.16g (approx)Buy Enduro Bearings Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
MAX bearings are designed without retainers and 40% more balls than standard ABEC 3 or 5 bearings. This enables them to carry a much higher load and makes them perfect for frame pivots. They are also packed with CRC Marine Grease, which will not wash out or break down when wet ensuring your frame bearings last even longer. Bearing Code: 6804, Dimensions: 20mm x 32mm x 7mm, ABEC: 3, Grade: 10, Seals: LLB, Grease: CRC Marine, Application: Frame Pivots, Weight: 18.45g , .
The ABEC3 6805 LLU Max raises the bar for military standard, high precision bearings. This MAX model was engineered without retainers and 40% more balls than standard ABEC 3 or 5 bearings, enabling them to carry a much higher load and perfect for frame pivots. This bearing is packed with CRC Marine Grease, which will not wash out or break down when wet ensuring your frame bearings last longer than ever before. Technologies: LLU Seals: Two NBR 70 rubber seals with medium/high contact seal, which rides in a matching groove machined into the bearing to make a labyrinth type seal. The outer sealing lip repels dirt and water while the inner sealing lip retains the grease. CRC Sta-Plex Marine: This grease will not wash out or break down under any extreme conditions including power washing, salt water intrusion from the salted roads, or even dirt getting into the rolling areas. The High Pressure properties of this grease provides a cushion for the sharp blows that suspension pivots will endure. Tough and Tenacious for high impact and extreme conditions.
The ABEC 5 MRA 2437 bearing raises the bar for military standard, high precision bearings. Featuring HRC-64 hardened Chromium Steel Balls, and 52100 High-Carbon Chromium-Alloy mirror polished races, this model operates without any noise. The stunning ball retainers allow virtually frictionless movement and provide constant lubrication to maximise the life of this bearing. Technologies: Kyodo Yushi PS-2: This grease has a protective interface between ceramic balls and metal races and for it’s high speed properties and minimum rolling resistance. Speed and Protection for high precision bearing systems. LLB Seals: Two NBR 70 rubber seals with low contact seal, which rides in a matching groove machined into the bearing for low drag or friction.
Enduro Bearings ABEC5 ACB MRA 2437 LLB BearingBuilt to deal with the demands and powerful movements of regular riding, this high-strength bearing features HRC-64 hardened Chromium Steel Balls, and 52100 High-Carbon Chromium-Alloy mirror polished races for reliable and strong performance. With an almost-silent working, the ball retainers allow virtually frictionless movement and provide consistent lubrication to prolong the life of this bearing.Features: Dimensions: 24x37x7mm ABEC: 5 Seals: LLB Grease: Kyodo Yushi PS-2 Application: Hubs, Bottom Brackets Weight: 31.1gBuy Enduro Bearings Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Enduro Bearings ABEC3 6805 LLU Max BearingA high-performance bearing for use on free-moving bicycle parts including frame pivots, this ABEC 3 bearing works to military standard and is capable of carrying super-high loads. Engineered without the need for retainers and filled with 40% more balls than standard ABEC 3 and ABEC 5 models, it works hard to keep your vital components working efficiently as can be. Loaded with CRC Marine Grease, it gives a consistently smooth and durable performance. Features:Bearing Code: 6805Dimensions: 25x37x7mm ABEC: 3 Grade: 10 Seals: LLU Grease: CRC Marine Application: Frame PivotsWeight: 21.55g Buy Enduro Bearings Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The entry standard for Enduro bearings. Enduro’s ABEC 3 bearings offer improved quality and performance over ABEC 1 bearings fitted by many OE manufacturers. Only the finest cycling components come standard with Enduro’s ABEC 3 bearings. With hardened chromium steel races, balls, and tough riveted steel retainers, these bearings are durable and the perfect low cost performance upgrade.Bearing Code: 6808,Dimensions: 40 x 52 x 7mm,ABEC: 3 ,Grade: 10,Seals: LLB,Grease: Mobile HP 222,Application: Hubs, Bottom Brackets,Weight: 31.30g.