The ABEC3 6904 2RS raises the bar for military standard, high precision bearings. Some of the finest cycling components come standard with this bearing, featuring hardened chromium steel races, balls, and tough riveted steel retainers, for a durable and perfect low-cost performance upgrade. Technologies: 2RS: Literally means the bearing has Two Rubber Seals. There are many types of seals. On most other bearings 2RS means that the seal is made from rubber and has one sealing lip rubbing on any flat part of the inner race. Enduro’s seals are usually either LLU (usually the MAX type bearings) or LLB (better for hubs). Mobile HP 222: This grease is another high pressure grease for maximum protection and constant lubrication. This synthetic grease holds up under all conditions and will not break down.
MAX bearings are designed without retainers and 40% more balls than standard ABEC 3 or 5 bearings. This enables them to carry a much higher load and makes them perfect for frame pivots. They are also packed with CRC Marine Grease, which will not wash out or break down when wet ensuring your frame bearings last even longer. Key Features: Bearing Code: 689,Dimensions: 9mm x 17mm x 5mm,ABEC: 3 ,Grade: 10,Seals: LLU,Grease: CRC Marine,Application: Frame Pivots,Weight: 7.02g.
Enduro's Stainless Steel bearings feature the same specs as the popular ABEC 3 range, but with corrosion resistant 440 C stainless steel balls and races.Key Features: Bearing Code: S608,Dimensions: 8mm x 22mm x 7mm,ABEC: 3,Grade: 10,Seals: 2RS,Grease: Mobile HP 222,Application: Hubs, Bottom Brackets,Weight: 11.16g.
The entry standard for Enduro bearings. Enduro’s ABEC 3 bearings offer improved quality and performance over ABEC 1 bearings fitted by many OE manufacturers. Only the finest cycling components come standard with Enduro’s ABEC 3 bearings. With hardened chromium steel races, balls, and tough riveted steel retainers, these bearings are durable and the perfect low cost performance upgrade.Key Features: Bearing Code: 63801, Dimensions: 12 x 21 x 7mm, ABEC: 3, Grade: 10, Seals: 2RS , Grease: Mobile HP 222, Application: Hubs, Bottom Brackets, Weight: 5.64g.
The entry standard for Enduro bearings. Enduro’s ABEC 3 bearings offer improved quality and performance over ABEC 1 bearings fitted by many OE manufacturers. Only the finest cycling components come standard with Enduro’s ABEC 3 bearings. With hardened chromium steel races, balls, and tough riveted steel retainers, these bearings are durable and the perfect low cost performance upgrade.Key Features: Bearing Code: MR 16267, Dimensions: 16 x 28 x 7mm, ABEC: 3, Grade: 10, Seals: 2RS, Grease: Mobile HP 222, Application: Hubs, Bottom Brackets.
Enduro Bearings ABEC3 63802 2RS BearingGiving a dependable and durable performance when paired with your hubs and bottom brackets, this hard-working bearing uses military-grade materials to keep you running smoothly. Commonly found on most modern bikes, it features hardened chromium steel races, balls, and tough riveted steel retainers, as well as Mobile HP 222 to keep an efficient, well-lubricated form. Features: Dimensions: 15x24x7mm ABEC: 3 Grade: 10 Seals: 2RS Grease: Mobile HP 22 Application: Hubs, Bottom Brackets Weight: 6.71g Buy Enduro Bearings Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
MAX bearings are designed without retainers and 40% more balls than standard ABEC 3 or 5 bearings. This enables them to carry a much higher load and makes them perfect for frame pivots. They are also packed with CRC Marine Grease, which will not wash out or break down when wet ensuring your frame bearings last even longer. Key Features: Bearing Code: 63800,Dimensions: 10mm x 19mm x 7mm,ABEC: 3 ,Grade: 10,Seals: LLB,Grease: CRC Marine,Application: Frame Pivots,Weight: 7.10g.
The entry standard for Enduro bearings. Enduro’s ABEC 3 bearings offer improved quality and performance over ABEC 1 bearings fitted by many OE manufacturers. Only the finest cycling components come standard with Enduro’s ABEC 3 bearings. With hardened chromium steel races, balls, and tough riveted steel retainers, these bearings are durable and the perfect low cost performance upgrade.Key Features: Bearing Code: 6202, Dimensions: 15 x 35 x 11mm, ABEC: 3, Grade: 10, Seals: 2RS, Grease: Mobile HP 222, Application: Hubs, Bottom Brackets, Weight: 30.25g .
The ABEC3 MR 15268 LLB raises the bar for military standard, high precision bearings. Some of the finest cycling components come standard with this bearing, featuring hardened chromium steel races, balls, and tough riveted steel retainers, for a durable and perfect low-cost performance upgrade. Technologies: LLB Seals: Two NBR 70 rubber seals with low contact seal, which rides in a matching groove machined into the bearing for low drag or friction. Mobile HP 222: This grease is another high-pressure grease for maximum protection and constant lubrication. This synthetic grease holds up under all conditions and will not break down.
Enduro Bearings ABEC3 MR 15268 LLB BearingRaising the bar for military standard, high precision bearings, this ABEC 3 model is found on some of the finest cycling components in the industry. Equipped with hardened chromium steel races, balls, and tough riveted steel retainers, it offers a durable and perfect low-maintenance, high-performance upgrade. Features: Dimensions: 15x26x8mm ABEC: 3 Grade: 10 Seals: LLB Grease: Mobile HP 222 Application: Hubs, Bottom Brackets Weight: 13.02g Buy Enduro Bearings Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The entry standard for Enduro bearings. Enduro's ABEC 3 bearings offer improved quality and performance over ABEC 1 bearings fitted by many OE manufacturers. Only the finest cycling components come standard with Enduro's ABEC 3 bearings. With hardened chromium steel races, balls, and tough riveted steel retainers, these bearings are durable and the perfect low cost performance upgradeBearing Code: MR 1526,Dimensions: 15 x 26 x 7mm,ABEC: 3 ,Grade: 10,Seals: LLB,Grease: Mobile HP 222,Application: Hubs, Bottom Brackets,Weight: 11.20g.
MAX bearings are designed without retainers and 40% more balls than standard ABEC 3 or 5 bearings. This enables them to carry a much higher load and makes them perfect for frame pivots. They are also packed with CRC Marine Grease, which will not wash out or break down when wet ensuring your frame bearings last even longer.Key Features: Bearing Code: 6900, Dimensions: 10mm x 22mm x 6mm, ABEC: 3, Grade: 10, Seals: LLU, Grease: CRC Marine, Application: Frame Pivots, Weight: 9.45g.
MAX berings are designed without retainers and 40% more balls than standard ABEC 3 or 5 bearings. This enables them to carry a much higher load and makes them perfect for frame pivots. They are also packed with CRC Marine Grease, which will not wash out or break down when wet ensuring your frame bearings last even longer.Bearing Code: 6802,Dimensions: 15mm x 24mm x 5mm,ABEC: 3 ,Grade: 10,Seals: LLU,Grease: CRC Marine,Application: Frame Pivots,Weight: 6.83g.
Enduro's ABEC 5 is the next performance step up from the popular ABEC 3 range. By using military level, high precision HRC-64 hardended Grade 5 Chromium Steel Balls, and 52100 High-Carbon Chromium-Alloy mirror polished races. This combination allows Enduro's ABEC 5 bearings to use tolerances twice as tight as ABEC 3, and operate without any noise. The Graphite/Nylon ball retainers allow virtually frictionless movement and provide constant lubrication to maximise the life of the bearing.Key Features: Bearing Code: 7902 (71902),Dimensions: 15mm x 28mm x 7mm,ABEC: 5,Grade: 5,Seals: LLB,Grease: Kyodo Yushi PS-2,Application: Hubs, Bottom Brackets,Weight: 15.00g.
MAX bearings are designed without retainers and 40% more balls than standard ABEC 3 or 5 bearings. This enables them to carry a much higher load and makes them perfect for frame pivots. They are also packed with CRC Marine Grease, which will not wash out or break down when wet ensuring your frame bearings last even longer.Key Features: Bearing Code: 608 LLU MAX-E, Dimensions: 8 x 22 x 7/10", ABEC: 3, Grade: 10, Seals: LLB, Grease: CRC Marine, Application: Frame Pivots, Weight: 12.69g.
The entry standard for Enduro bearings. Enduro’s ABEC 3 bearings offer improved quality and performance over ABEC 1 bearings fitted by many OE manufacturers. Only the finest cycling components come standard with Enduro’s ABEC 3 bearings. With hardened chromium steel races, balls, and tough riveted steel retainers, these bearings are durable and the perfect low cost performance upgrade.Key Features: Bearing Code: 6804, Dimensions: 20 x 32 x 7mm, ABEC: 3, Grade: 10, Seals: LLB, Grease: Mobile HP 222, Application: Hubs, Bottom Brackets, Weight: 17.19g.
MAX bearings are designed without retainers and 40% more balls than standard ABEC 3 or 5 bearings. This enables them to carry a much higher load and makes them perfect for frame pivots. They are also packed with CRC Marine Grease, which will not wash out or break down when wet ensuring your frame bearings last even longer.Key Features: Bearing Code: R8, Dimensions: 1/2" x 1 1/8" x 5/16", ABEC: 3, Grade: 10, Seals: LLB, Grease: CRC Marine, Application: Frame Pivots, Weight: 21.62g.
MAX bearings are designed without retainers and 40% more balls than standard ABEC 3 or 5 bearings. This enables them to carry a much higher load and makes them perfect for frame pivots. They are also packed with CRC Marine Grease, which will not wash out or break down when wet ensuring your frame bearings last even longer.Key Features: Bearing Code: 6902, Dimensions: 15mm x 28mm x 7mm, ABEC: 3, Grade: 10, Seals: LLU, Grease: CRC Marine, Application: Frame Pivots, Weight: 15.85g.
The entry standard for Enduro bearings. Enduro’s ABEC 3 bearings offer improved quality and performance over ABEC 1 bearings fitted by many OE manufacturers. Only the finest cycling components come standard with Enduro’s ABEC 3 bearings. With hardened chromium steel races, balls, and tough riveted steel retainers, these bearings are durable and the perfect low cost performance upgrade.Key Features:Bearing Code: MR 24371,Dimensions: 24 x 37.1 x 7mm,ABEC: 3,Grade: 10,Seals: LLB,Grease: Mobile HP 222,Application: Hubs, Bottom Brackets,Weight: 31.10g.
The entry standard for Enduro bearings. Enduro’s ABEC 3 bearings offer improved quality and performance over ABEC 1 bearings fitted by many OE manufacturers. Only the finest cycling components come standard with Enduro’s ABEC 3 bearings. With hardened chromium steel races, balls, and tough riveted steel retainers, these bearings are durable and the perfect low cost performance upgrade. Key Features: Bearing Code: MR 20307,Dimensions: 20x30x7mm,ABEC: 3 ,Grade: 10,Seals: LLB,Grease: Mobile HP 222,Application: Hubs, Bottom Brackets,Weight: 14.10g.