Ready for fast-paced trail action, this brilliant model features an incredibly robust aluminium cup and cover construction. This makes it perfect at withstanding all the intensity which comes with aggressive downhill runs and all-day epics. Cane Creek has also kitted this stunning component out with an upper bearing seal and an alloy dual-seal crown race for amazingly low-friction and protection against contaminants. Bearings Types: - ZS44 will take a 41mm bearing - EC44 will take a 52mm bearing - ZS56 will take a 52mm bearing - IS41 will take a 41mm bearing - IS42 will take a 42mm bearing - IS52 will take a 52mm bearing
Cane Creek HELLBENDER 70 Tapered HeadsetThis premium-quality headset is perfect for MTB use as it delivers an outstanding strength to weight ratio. It features an immensely robust aluminium cup and cover construction which makes it ideal at withstanding all the havoc that comes with aggressive downhill runs and all-day epics. Cane Creek has also equipped this brilliant model with a upper bearing seal and an alloy dual-seal crown race for amazingly low-friction and protection against contaminants. Features: Cup Material: 6061 T6 Aluminium Cover Material: 6061 T6 Aluminium Crown Material: Alloy Use: MTB Steerer Diameter: 1 1/8-1.5" tapered Stack Height: External Cup (EC): 12mm bottom; ZeroStack (ZS): 8mm top and 4mm bottom; Integrated (IS): 9mm top and 1mm bottom Bearings: ZS44 will take a 41mm bearing EC44 will take a 52mm bearing ZS56 will take a 52mm bearing IS41 will take a 41mm bearing IS42 will take a 42mm bearing IS52 will take a 52mm bearing Buy Cane Creek Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Cane Creek HELLBENDER 70 Tapered HeadsetThis premium-quality headset is perfect for MTB use as it delivers an outstanding strength to weight ratio. It features an immensely robust aluminium cup and cover construction which makes it ideal at withstanding all the havoc that comes with aggressive downhill runs and all-day epics. Cane Creek has also equipped this brilliant model with a upper bearing seal and an alloy dual-seal crown race for amazingly low-friction and protection against contaminants. Features: Cup Material: 6061 T6 Aluminium Cover Material: 6061 T6 Aluminium Crown Material: Alloy Use: MTB Steerer Diameter: 1 1/8-1.5" tapered Stack Height: External Cup (EC): 12mm bottom; ZeroStack (ZS): 8mm top and 4mm bottom; Integrated (IS): 9mm top and 1mm bottom Bearings: ZS44 will take a 41mm bearing EC44 will take a 52mm bearing ZS56 will take a 52mm bearing IS41 will take a 41mm bearing IS42 will take a 42mm bearing IS52 will take a 52mm bearing Buy Cane Creek Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The ultimate in performance and durability with low stack height and genuinely low weight. Machined from 7050-T6 aluminium with a split-lip seal to keep contaminants out and grease in with less dragA captured compression ring sets the bearing preload and stays true no matter how you ride (no rocking or creakingPremium split-lip sealed stainless steel bearings give double the protection while decreasing frictionCompatible with Interlock spacersHand polished and anodised.
Cane Creek HELLBENDER 70 Tapered HeadsetThis premium-quality headset is perfect for MTB use as it delivers an outstanding strength to weight ratio. It features an immensely robust aluminium cup and cover construction which makes it ideal at withstanding all the havoc that comes with aggressive downhill runs and all-day epics. Cane Creek has also equipped this brilliant model with a upper bearing seal and an alloy dual-seal crown race for amazingly low-friction and protection against contaminants. Features: Cup Material: 6061 T6 Aluminium Cover Material: 6061 T6 Aluminium Crown Material: Alloy Use: MTB Steerer Diameter: 1 1/8-1.5" tapered Stack Height: External Cup (EC): 12mm bottom; ZeroStack (ZS): 8mm top and 4mm bottom; Integrated (IS): 9mm top and 1mm bottom Bearings: ZS44 will take a 41mm bearing EC44 will take a 52mm bearing ZS56 will take a 52mm bearing IS41 will take a 41mm bearing IS42 will take a 42mm bearing IS52 will take a 52mm bearing Buy Cane Creek Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Cane Creek HELLBENDER 70 Tapered HeadsetThis premium-quality headset is perfect for MTB use as it delivers an outstanding strength to weight ratio. It features an immensely robust aluminium cup and cover construction which makes it ideal at withstanding all the havoc that comes with aggressive downhill runs and all-day epics. Cane Creek has also equipped this brilliant model with a upper bearing seal and an alloy dual-seal crown race for amazingly low-friction and protection against contaminants. Features: Cup Material: 6061 T6 Aluminium Cover Material: 6061 T6 Aluminium Crown Material: Alloy Use: MTB Steerer Diameter: 1 1/8-1.5" tapered Stack Height: External Cup (EC): 12mm bottom; ZeroStack (ZS): 8mm top and 4mm bottom; Integrated (IS): 9mm top and 1mm bottom Bearings: ZS44 will take a 41mm bearing EC44 will take a 52mm bearing ZS56 will take a 52mm bearing IS41 will take a 41mm bearing IS42 will take a 42mm bearing IS52 will take a 52mm bearing Buy Cane Creek Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Keeping you in control, this sturdy component features a strong aluminium cup and cover construction. This makes it ideal at tackling all the challenges which come with a long day behind the bars. Cane Creek has also gone the extra mile with this reliable version by equipping it with a stainless steel crown race for unrivalled robustness and stability with every turn. Bearing Types: - EC34 will take a 41mm bearing - ZS44 will take a 41mm bearing - ZS49 will take a 41mm bearing - EC44/40 will take a 52mm bearing - EC44/33 will take a 47mm bearing - EC49 will take a 52mm bearing - IS41 will take a 41mm bearing - IS42 will take a 42mm bearing - IS52 will take a 52mm bearing
Precision, quality, valueHellbender 70 Lite is a headset that packs durability, weight savings and value into one product. Equipped with 6000 series aluminum and 35% lighter over comparable models. The Hellbender 70 Lite is an ideal headset choice for any bike where weight savings is a priority - a lightweight headset that doesn’t lack durability or performance.CUPS & COVERS: 6061 T-6 Aluminum Internally contoured and relieved to minimize weight and maximize strength,TOP COVER: Low-friction upper bearing seal completely seals cup from contaminants and is fully captured by the top cover with no loose parts,CROWN RACE: Alloy Dual-Seal crown race provides excellent seal efficiency,COMPRESSION RING: Low friction Carbon friendly captured compression ring,BEARINGS: Lightweight aluminum/w steel hybrid Hellbender LITE sealed cartridge bearing,WEIGHT: ZeroStack (ZS) — 90g (vs 117g for normal ZS Hellbender) Integrated (IS) — 54g (vs 81g for normal IS Hellbender).
A headset designed to bridge the gap between the 40-series and 110-series headsets. With all the design characteristics, sealing element, and Hellbender bearing found on a 110-series headset, at a price closer to a 40-series.Machined from 6061 T-6 aluminium,Alloy dual seal crown race,Premium Hellbender bearings with low-friction seals,Interlok spacer compatible,Internal parts are cross compatible across the 10, 40 and 110-series,Upper stack: 9mm (Short) ,Lower stack: 1mm ,Weight: TBC,Warranty: 1 Year (excluding bearings).
Cane Creek 110-Series HeadsetThis premium headset is perfect for both road and MTB use as it offers a smooth and reliable steering solution wherever your journey leads you. It features a strong aluminium cup and cover construction which makes it ideal at tackling all the challenges which come with a long day behind the bars. Cane Creek has also gone the extra distance with this version by equipping it with a stainless steel crown race for unrivalled robustness and stability with every turn.Features: Cup Material: 7075 T6 Aluminium Cover Material: 7075 T6 Aluminium Crown Race Material: Stainless Steel Use: Road, MTB Steerer Diameter: 1 1/8-1.5" tapered Stack Height: External Cup (EC): 16mm top and 12mm bottom; ZeroStack (ZS): 8mm or 15mm top and 4mm bottom; Integrated (IS): 9mm or 15mm top and 1mm bottom Bearings: EC34 will take a 41mm bearing ZS44 will take a 41mm bearing ZS49 will take a 41mm bearing EC44/40 will take a 52mm bearing EC44/33 will take a 47mm bearing EC49 will take a 52mm bearing IS41 will take a 41mm bearing IS42 will take a 42mm bearing IS52 will take a 52mm bearing Buy Cane Creek Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The ultimate in performance and durability with low stack height and genuinely low weight.Machined from 7050-T6 aluminium with a split-lip seal to keep contaminants out and grease in with less drag.Top Assembly: IS41/28.6Lower Assembly: IS41/30
Featuring some of the lowest stack height bearing cover options available, our premium stainless steel Hellbender bearing, 6061 T-6 Aluminum cups and covers, the Hellbender 70 Slam is a premium headset created for riders seeking to lower their handlebars as low as possible without compromising bearing longevity and proper preload.CUPS & COVERS: 6061 T-6 Aluminum Internally contoured and relieved to minimize weight and maximize strength,TOP COVER: Designed with the lowest stack height possible for both ZS and IS headsets,CROWN RACE: Alloy Dual-Seal crown race provides excellent seal efficiency,COMPRESSION RING: Low friction Carbon friendly captured compression ring,BEARINGS: Premium sealed HELLBENDER stainless bearings,STACK HEIGHT: ZS - 2mm top (vs 8mm top for normal ZS Hellbender) IS - 4.6mm top (vs 9mm top for normal ZS Hellbender).
The ultimate in performance and durability with low stack height and genuinely low weight. Machined from 7050-T6 aluminium with a split-lip seal to keep contaminants out and grease in with less drag.A captured compression ring sets the bearing preload and stays true no matter how you ride (no rocking or creaking) ,Premium split-lip sealed stainless steel bearings give double the protection while decreasing friction,Compatible with Interlock spacers,Hand polished and anodised,Upper/Lower stack: 16/12mm,Weight: 97g.
For over 20 years, Cane Creek's Thudbuster has been the industry standard in suspension seat posts by providing unequalled comfort and reliability to riders around the world. Travel: 50mm (1.97")Seat clamp: Single bolt fastening and angle adjustment designElastomer: 2-piece design, tool-free inner elastomer changes for various rider weightPivots: Threaded, serviceable, hard anodized aluminium axles flanged PTFE bushingsRider Weight Limit: 150kg/330lbSizes: 27.2mm, 30.9mm, 31.6mm (additional diameters available with shim)Length: Minimum 100mm, Maximum 274mmWeight: 580g (31.6mm)The Thudbuster G4 is superior to its predecessor in every way. Building on Thudbuster s proven parallel linkage technology we have completely re-designed the seatpost for increased durability, a higher rider weight limit, additional suspension travel, a single bolt seat clamp design as well as ease of use through tool-free elastomer change. By improving on this already legendary design, we re confident to say that the Thudbuster G4 is the most advanced suspension seatpost ever made.
For over 20 years, Cane Creek's Thudbuster has been the industry standard in suspension seat posts by providing unequalled comfort and reliability to riders around the world. Travel: 50mm (1.97")Seat clamp: Single bolt fastening and angle adjustment designElastomer: 2-piece design, tool-free inner elastomer changes for various rider weightPivots: Threaded, serviceable, hard anodized aluminium axles flanged PTFE bushingsRider Weight Limit: 150kg/330lbSizes: 27.2mm, 30.9mm, 31.6mm (additional diameters available with shim)Length: Minimum 100mm, Maximum 274mmWeight: 580g (31.6mm)The Thudbuster G4 is superior to its predecessor in every way. Building on Thudbuster s proven parallel linkage technology we have completely re-designed the seatpost for increased durability, a higher rider weight limit, additional suspension travel, a single bolt seat clamp design as well as ease of use through tool-free elastomer change. By improving on this already legendary design, we re confident to say that the Thudbuster G4 is the most advanced suspension seatpost ever made.
For over 20 years, Cane Creek's Thudbuster has been the industry standard in suspension seat posts by providing unequalled comfort and reliability to riders around the world. Travel: 50mm (1.97")Seat clamp: Single bolt fastening and angle adjustment designElastomer: 2-piece design, tool-free inner elastomer changes for various rider weightPivots: Threaded, serviceable, hard anodized aluminium axles flanged PTFE bushingsRider Weight Limit: 150kg/330lbSizes: 27.2mm, 30.9mm, 31.6mm (additional diameters available with shim)Length: Minimum 100mm, Maximum 274mmWeight: 580g (31.6mm)The Thudbuster G4 is superior to its predecessor in every way. Building on Thudbuster s proven parallel linkage technology we have completely re-designed the seatpost for increased durability, a higher rider weight limit, additional suspension travel, a single bolt seat clamp design as well as ease of use through tool-free elastomer change. By improving on this already legendary design, we re confident to say that the Thudbuster G4 is the most advanced suspension seatpost ever made.
Whether you're touring across the city or planning your next drop bar gravel bike adventure, this suspension seatpost is engineered for smooth and dependable performance. It features a hard-wearing forged aluminium build, which gives it excellent toughness when travelling across mixed terrain conditions. Suitable for a wide range of riding disciplines, this model is also compatible with electric bikes (E-bikes). Bolt-On Comfort For over 20 years, Thudbuster has been the bicycle industry-standard in suspension seatposts by providing unequalled comfort and reliability to riders around the world. Suspension Seatpost The latest generation Thudbuster LT is superior to its predecessor in every way. Building on Thudbuster’s proven parallel linkage technology we have completely re-designed the seatpost for increased durability, additional suspension travel, as well as ease of use through tool-free elastomer change and a single-bolt seat clamp design. By improving on this already legendary design, we’re confident to say that the newest generation Thudbuster is the most advanced suspension seatpost ever made. Parallel Linkage Design The Thudbuster Parallel Linkage technology stays in the direct path of the natural travel of the rear wheel. As a bump lifts the back of a bicycle, the rear wheel pushes up and forward into the rider. The Thudbuster works by compressing along the exact opposite path — down and rearward — absorbing force at the same rate. This results in a natural suspension feel without being overly active and allows for more travel without compromising pedalling position. Manufacturer's Part Number: SP7A309 Black 30.9mm 90mm Travel SP7A316 Black 31.6mm 90mm Travel SP7A272 Black 27.2mm 90mm Travel
Cane Creek Thudbuster LT G4 Seat PostDesigned for smooth, supportive and reliable performance, this suspension seatpost is ideal for everything from touring across the city on your road bike to exploring the countryside on your drop bar gravel bike. It features a hard-wearing forged aluminium build, which gives it excellent toughness when travelling across mixed terrain conditions. Suitable for a wide range of riding disciplines, this model is also compatible with electric bikes (E-bikes).Bolt-On ComfortFor over 20 years, Thudbuster has been the bicycle industry-standard in suspension seatposts by providing unequalled comfort and reliability to riders around the world.Suspension SeatpostThe latest generation Thudbuster LT is superior to its predecessor in every way. Building on Thudbuster's proven parallel linkage technology we have completely re-designed the seatpost for increased durability, additional suspension travel, as well as ease of use through tool-free elastomer change and a single-bolt seat clamp design.By improving on this already legendary design, we're confident to say that the newest generation Thudbuster is the most advanced suspension seatpost ever made.Parallel Linkage DesignThe Thudbuster Parallel Linkage technology stays in the direct path of the natural travel of the rear wheel. As a bump lifts the back of a bicycle, the rear wheel pushes up and forward into the rider. The Thudbuster works by compressing along the exact opposite path — down and rearward — absorbing force at the same rate. This results in a natural suspension feel without being overly active and allows for more travel without compromising pedalling position.Features: Seatpost Material: Forged Aluminium Use: Road, Gravel, Touring and Electric Bike (E-Bike) Setback: 5mm Travel: 90mm Seat Clamp: Single bolt fastening and angle adjustment design Pivots: Threaded, serviceable, hard anodised Aluminium axles flanged PTFE bushings Elastomer: Medium firm elastomer pre-installed from the factory. Extra Soft, Soft, Firm, and Extra Firm elastomers sold separately Extension: Minimum: 146mm; Maximum: 290mm (27.2mm option); 320mm (30.9mm and 31.6mm options) Max Rider Weight: 250lbs / 113kg Weight: 750g (31.6mm option)Manufacturer's Part Number: SP7A309 Black 30.9mm 90mm Travel SP7A316 Black 31.6mm 90mm Travel SP7A272 Black 27.2mm 90mm TravelBuy Cane Creek Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The all-new AngleSet threadless headset makes it possible to change the game. With Angleset the head angle of a mountain bike can be transformed with ease, as the lowstack-height AngleSet offers up to six offset angle adjustments.With steeper or slacker adjustments from 0.5 to 1.5 degrees, dialing in the perfect geometry to attack the trail is a breeze. The patent-pending design of AngleSet is head-tube length independent and fits most popular head-tube standards.A self-aligning feature between the bearings and the steerer-tube ensures a perfect fit and makes fork installation a snap.
For over 20 years, Thudbuster has been the industry standard in suspension seatposts by providing unequaled comfort and reliability to riders around the world. We are now proud to announce the latest evolution to that legacy with the Thudbuster Generation 4 (G4).The new Thudbuster LT is superior to its predecessor in every way. Building on Thudbuster’s proven parallel linkage technology we have completely re-designed the seatpost for increased durability, additional suspension travel, as well as ease of use through tool-free elastomer change and a single-bolt seat clamp design. By improving on this already legendary design, we’re confident to say that the newest generation Thudbuster is the most advanced suspension seatpost ever made. Key Features: Travel: 90mm (3.54"),Seatclamp: Single bolt fastening and angle adjustment design,Elastomer: 2-piece design, tool-free inner elastomer change for various rider weight,Pivots: Threaded, serviceable, hard anodized aluminum axles flanged PTFE bushings,Rider Weight Limit: 115kg/250lb,Sizes: 27.2mm, 30.9mm, 31.6mm (additional diameters available with shim),Length: 420mm (30.9 & 31.6), 390mm (27.2),Extension: Minimum - 146mm, Maximum - 320mm (30.9 & 31.6) / 290mm (27.2),Weight: 750g (31.6mm) .