The series incorporates all the features necessary for a durable, light-weight, long-lasting headset and represents the perfect balance of performance, durability and value. Short Option S.H.I.S: Top Cup: ZS44/28.6/H8; Bottom Cup: ZS44/30 Tall Option S.H.I.S: Top Cup: ZS44/28.6/H15; Bottom Cup: ZS44/30
Cane Creek 40-Series ZS44 ZeroStack HeadsetThe Cane Creek 40-series ZS44 is part of the ZeroStack headset range, using fully sealed bearings that drop into aluminium cups this internal headset is designed to press into frames that have a head tube with an inner diameter of 44mm.The 40-Series sets the standard for performance, durability and value. Drawing from the Premium 110-Series Design, the 40-Series incorporates all the features necessary for a durable, lightweight, long-lasting headset.To make it easier, Cane Creek developed consistent graphics, interchangeable parts and over 40 configurations to meet almost every need. Sold in straight and tapered assemblies or tops & bottoms, Cane Creek's 40-Series offers the largest fitment range of any headset line on the market. Precision engineered by Cane Creek in Fletcher, NC.Features: Headset type: Internal Headset Steerer Tube OD: 1-1/8” Upper Head Tube ID: 44.00mm Lower Head Tube ID: 44.00mm Fork Crown Seat OD: 30.015mm Total Stack Height: 12mm (Short Cover)/19mm (Tall Cover) Top Stack Height: 8mm (Short Cover)/15mm (Tall Cover) Bottom Stack Height: 4mm Weight: 88g (Short Cover)/97g (Tall Cover) Manufacturer Reference Codes:Black 1.1/8" Short Cover: BAA0075K; Black 1.1/8" Tall Cover: BAA0076KBuy Cane Creek Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Cane Creek 40-Series ZS44 ZeroStack HeadsetThe Cane Creek 40-series ZS44 is part of the ZeroStack headset range, using fully sealed bearings that drop into aluminium cups this internal headset is designed to press into frames that have a head tube with an inner diameter of 44mm.The 40-Series sets the standard for performance, durability and value. Drawing from the Premium 110-Series Design, the 40-Series incorporates all the features necessary for a durable, lightweight, long-lasting headset.To make it easier, Cane Creek developed consistent graphics, interchangeable parts and over 40 configurations to meet almost every need. Sold in straight and tapered assemblies or tops & bottoms, Cane Creek's 40-Series offers the largest fitment range of any headset line on the market. Precision engineered by Cane Creek in Fletcher, NC.Features: Headset type: Internal Headset Steerer Tube OD: 1-1/8” Upper Head Tube ID: 44.00mm Lower Head Tube ID: 44.00mm Fork Crown Seat OD: 30.015mm Total Stack Height: 12mm (Short Cover)/19mm (Tall Cover) Top Stack Height: 8mm (Short Cover)/15mm (Tall Cover) Bottom Stack Height: 4mm Weight: 88g (Short Cover)/97g (Tall Cover) Manufacturer Reference Codes:Black 1.1/8" Short Cover: BAA0075K; Black 1.1/8" Tall Cover: BAA0076KBuy Cane Creek Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The series incorporates all the features necessary for a durable, light-weight, long-lasting headset and represents the perfect balance of performance, durability and value.
All set for rowdy off-road runs, this sleek component features a robust aluminium cup and cover material. This makes it a perfect companion for withstanding all the knocks and bumps associated with intense off-road adventures. Cane Creek has also equipped this brilliant version with a steel crown race construction which adds another layer of toughness to this already rock-solid component. Bearing Types: - ZS44 will take a 41mm bearing - EC44/40 will take a 52mm bearing - EC44/33 will take a 47mm bearing - ZS56 will take a 52mm bearing - IS41 will take a 41mm bearing - IS42 will take a 42mm bearing - IS52 will take a 52mm bearing
Cane Creek 40-Series EC34 Conventional HeadsetThe 40-Series Headset from Cane Creek takes its inspiration from their 110-Series model, including many of its features and more to create a lightweight and reliable headset that won't let you down.To make it easier, we developed consistent graphics, interchangeable parts and over 40 configurations to meet almost every need. Sold in straight and tapered assemblies or tops & bottoms, Cane Creek's 40-Series offers the largest fitment range of any headset line on the market. Precision engineered by Cane Creek in Fletcher, NC.Features:Steerer Tube OD: 1-1/8”Upper head tube ID: 33.95mmLower head tube ID: 33.95mmFork crown seat OD: 30.015mmTotal stack height: 28mmTop stack height: 16mmBottom stack height: 12mmWeight: 98gBuy Cane Creek Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Cane Creek 40-Series HeadsetDesigned for challenging mountain bike (MTB) use, this 40-Series Headset from Cane Creek offers you a hard-wearing and long-lasting component that is ready for whatever the trail brings. The cup and cover are made from tough, lightweight aluminium and Cane Creek have also finished this version with a steel crown race for enhanced strength. Features:Part No: BAA0741KCup Material: 6061 T6 AluminiumCover Material: 6061 T6 AluminiumCrown Material: SteelUse: Mountain Bike (MTB)Steerer: TaperedStack Height: External Cup (EC): 16mm top and 12mm bottom; ZeroStack (ZS): 8mm or 15mm top and 4mm bottom; Integrated (IS): 9mm or 15mm top and 1mm bottomBearings:EC30 will take a 38mm bearingEC34 will take a 41mm bearingZS44 will take a 41mm bearingZS49 will take a 41mm bearingEC44/40 will take a 52mm bearingEC44/33 will take a 47mm bearingEC49 will take a 52mm bearingZS56 will take a 52mm bearingZS62 will take a 52mm bearingIS41 will take a 41mm bearingIS42 will take a 42mm bearingIS52 will take a 52mm bearing Buy Cane Creek Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Cane Creek 40-Series HeadsetDesigned for challenging mountain bike (MTB) use, this 40-Series Headset from Cane Creek offers you a hard-wearing and long-lasting component that is ready for whatever the trail brings. The cup and cover are made from tough, lightweight aluminium and Cane Creek have also finished this version with a steel crown race for enhanced strength. Features:Part No: BAA0741KCup Material: 6061 T6 AluminiumCover Material: 6061 T6 AluminiumCrown Material: SteelUse: Mountain Bike (MTB)Steerer: TaperedStack Height: External Cup (EC): 16mm top and 12mm bottom; ZeroStack (ZS): 8mm or 15mm top and 4mm bottom; Integrated (IS): 9mm or 15mm top and 1mm bottomBearings:EC30 will take a 38mm bearingEC34 will take a 41mm bearingZS44 will take a 41mm bearingZS49 will take a 41mm bearingEC44/40 will take a 52mm bearingEC44/33 will take a 47mm bearingEC49 will take a 52mm bearingZS56 will take a 52mm bearingZS62 will take a 52mm bearingIS41 will take a 41mm bearingIS42 will take a 42mm bearingIS52 will take a 52mm bearing Buy Cane Creek Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Cane Creek's new 40 series headset replaces the previous 'S-Series' and continues to be the as the mid-priced 'workhorse' in the lineup. Impeccably engineered to exacting standards it features high quality 6061 aluminium cups which house durable black oxide cartridge bearings which are capable of withstanding extended use in muddy and gritty conditions with minimal maintenance.The low friction seals allow for seamless movement, whilst Cane Creeks's 'Clip-Seal' design completely seals the top assembly and captures the compression ring to reduce the number of loose parts required, simplifying assembly and saving weight. A 40 series headset represents the perfect balance of performance, durability and value.
The all-new 40-Series is the work-horse of Cane Creek's headset line-up. The series incorporates all the features necessary for a durable, light-weight, long-lasting headset and represents the perfect balance of performance, durability and value.Machined from 6061 T-6 Aluminium,Innovative Clip-Seal completely seals the top assembly and captures the compression ring to reduce the numberof loose parts,High quality, low friction face-seals,Durable steel crown race,Dependable black oxide, sealed bearings,Interlock spacer compatible,Upper/Lower stack: 8/4mm,Colour: Black ,Weight: 115g.
The Slamset is a premium headset created for riders seeking to lower their handlebars further than the standard stack height without compromising bearing sealing and correct preload. With the hellbender bearing included, the Slamset excels at durability and longevity when it comes to steering performance.Machined from 7075 T-6 Aluminium ,High quality, low friction face-seals,Hellbender bearings feature the highest level of sealing to provide protection against dirt ingress,Lightweight aluminium crown race,Stack: 4.6mm,Weight: 36g.
The ultimate in performance and durability with low stack height and genuinely low weight. Machined from 7050-T6 aluminium with a split-lip seal to keep contaminants out and grease in with less dragA captured compression ring sets the bearing preload and stays true no matter how you ride (no rocking or creaking)Premium split-lip sealed stainless steel bearings give double the protection while decreasing frictionCompatible with Interlock spacersHand polished and anodised.
The all-new 40-Series is the work-horse of Cane Creek's headset line-up.The series incorporates all the features necessary for a durable, light-weight, long-lasting headset and represents the perfect balance of performance, durability and value.Top Cup assembly: ZS44/28Bottom Cup assembly: ZS44/30
High performance, lightweight levers designed to solve the problem of cable pull for the drop bar rider who wants disc brakes or linear style brakes. This is a great option for single speeds or commuter bikes with drop barsCold forged 6061-T6 aluminium leversExclusive rubber compound310g.
The 40-Series is the work-horse of Cane Creek's headset line-up. The series incorporates all the features necessary for a durable, light-weight, long-lasting headset and represents the perfect balance of performance, durability and value. Suitable for any type of bike including road, gravel MTB.The new ZN40 bearings are a zinc-coated, machined steel cartridge bearing with hardened steel balls. The new material is much more corrosion-resistant, which vastly increases the longevity of the 40 series headsetsMachined from 6061 T-6 Aluminium,Innovative Clip-Seal completely seals the top assembly and captures the compression ring to reduce the numberof loose parts,High quality, low friction face-seals,Durable steel crown race,Dependable ZN40, sealed bearings,Interlock spacer compatible,Colour: Black,Warranty: 1 Year (excluding bearings).Note: Tall/Wide Cover version fits specific Yeti frames - 2019 + SB150 / SB165 or anything else that requires the 51.5mm cover.
Light As AERLong recognized as the world’s lightest headset, the AER series offers a hybrid steel and aluminum bearing that provides even greater durability and a 35% weight savings over comparable models. Strategic machining and precision contours provide an optimal balance between weight savings and strength.The new AER headset is the ideal headset choice for lightweight road and mountain bike applications. For an ultralight race day application, riders can outfit the AER with a Norglide® composite bearing.CNC-Machined 7075 T-6 alloy. Contoured and relieved to provide an optimal balance of weight and strengthStack Heights: 9mm (Short), 15mm (Tall)
Cane Creek 40-Series HeadsetDesigned for challenging mountain bike (MTB) use, this 40-Series Headset from Cane Creek offers you a hard-wearing and long-lasting component that is ready for whatever the trail brings. The cup and cover are made from tough, lightweight aluminium and Cane Creek have also finished this version with a steel crown race for enhanced strength. Features:Part No: BAA0741KCup Material: 6061 T6 AluminiumCover Material: 6061 T6 AluminiumCrown Material: SteelUse: Mountain Bike (MTB)Steerer: TaperedStack Height: External Cup (EC): 16mm top and 12mm bottom; ZeroStack (ZS): 8mm or 15mm top and 4mm bottom; Integrated (IS): 9mm or 15mm top and 1mm bottomBearings:EC30 will take a 38mm bearingEC34 will take a 41mm bearingZS44 will take a 41mm bearingZS49 will take a 41mm bearingEC44/40 will take a 52mm bearingEC44/33 will take a 47mm bearingEC49 will take a 52mm bearingZS56 will take a 52mm bearingZS62 will take a 52mm bearingIS41 will take a 41mm bearingIS42 will take a 42mm bearingIS52 will take a 52mm bearing Buy Cane Creek Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Cane Creek 40-Series HeadsetDesigned for challenging mountain bike (MTB) use, this 40-Series Headset from Cane Creek offers you a hard-wearing and long-lasting component that is ready for whatever the trail brings. The cup and cover are made from tough, lightweight aluminium and Cane Creek have also finished this version with a steel crown race for enhanced strength. Features:Part No: BAA0741KCup Material: 6061 T6 AluminiumCover Material: 6061 T6 AluminiumCrown Material: SteelUse: Mountain Bike (MTB)Steerer: TaperedStack Height: External Cup (EC): 16mm top and 12mm bottom; ZeroStack (ZS): 8mm or 15mm top and 4mm bottom; Integrated (IS): 9mm or 15mm top and 1mm bottomBearings:EC30 will take a 38mm bearingEC34 will take a 41mm bearingZS44 will take a 41mm bearingZS49 will take a 41mm bearingEC44/40 will take a 52mm bearingEC44/33 will take a 47mm bearingEC49 will take a 52mm bearingZS56 will take a 52mm bearingZS62 will take a 52mm bearingIS41 will take a 41mm bearingIS42 will take a 42mm bearingIS52 will take a 52mm bearing Buy Cane Creek Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The performance of your shock is directly related to the quality of your spring. VALT® is a lightweight coil spring that offers a significant weight reduction over standard steel springs. Designed to be as light as possible without sacrificing action or durability, the high quality steel in VALT® allows for less material to be used in the coils. Riders can enjoy the performance benefit and consistency without the weight penalty.. The large inner diameter of the VALT® means it will fit Cane Creek shocks and most other shock options on the market.
The ultimate in performance and durability with low stack height and genuinely low weight. Machined from 7050-T6 aluminium with a split-lip seal to keep contaminants out and grease in with less drag.Premium split-lip sealed stainless steel bearings give double the protection while decreasing friction,Aluminium crown race with integrated seal,Hand polished and anodised.