Wolf Tooth Shimano-RF Cinch Elliptical Chain RingSpecifically designed for use with Race Face Cinch cranksets, this 12 speed chainring offers fantastic torque, speed and longevity on your mountain bike adventures. Wolf Tooth has equipped this trail-ready model with a robust aluminium construction, making it more than capable of handling all the intensity that's associated with all-day epics in the mountains. Ready for action, this model is kitted out with Drop Stop technology for excellent wear life, chain retention and mud clearance. These chainrings are for Race Face Cinch cranks such as Turbine, Next SL, Sixc & Aeffect. The Wolf Tooth Cinch rings feature our patented Drop-Stop design for the best wear life, chain retention and mud clearance. Compatibility:Any Race Face Cinch system crankset. Wolf Tooth's patented Drop-Stop wide/narrow tooth profile for the ultimate chain retention and mud shedding ability. If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention). Features: Material: 7075-T6 Aluminium Use: MTB Speed: 12 speed Chain Compatibility: Shimano Hyperglide+ Crankset Compatibility: Race Face CinchMount: Direct mountChainlin: Boost offset 52mm Number of Chainrings in Box: OneMade in the USA Part Numbers: 30T: WTOVALRFC30BSTSH12; 32T: WTOVALRFC32BSTSH12; 34T: WTOVALRFC34BSTSH12 Weight: 30T: 58g; 32T: 63g; 34T: 69gBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Shimano IS-II Remote Dropper LeverEngineered for the rigours of today's mountain bike (MTB) trail riding disciplines, this dropper post lever is specifically designed for Shimano I-SPEC II and includes the IS-II hardware for quick and easy installation.Solve common dropper remote complaints with the compact, ergonomic and sturdy ReMote dropper lever.Beginning with a long list of rider and mechanic requests, the Wolf Tooth team set out to address each and every one. From its hassle-free installation, to smooth ball bearing action, to the engineered failure point, the lightweight ReMote leads in every category.ReMote IS-II for Shimano I-SPEC II - Includes IS-II hardware.Features: Body Material: 6061 T6 Aluminium Axle Material: Delrin Use: Mountain Bike (MTB) Type: Shimano IS-II Easy to Install Sealed cartridge bearings Textured lever Made in USA Not Included: Cable and housing (available separately) Weight: 35gTechnologies: UpFront Cable Fixing: The dropper cable is attached at the lever, making setup and adjustment quick and easy. Simply secure cable at seatpost using stock barrel or cable clamp and route to bar for a significant reduction in installation time and frustration. Large-Diameter Ball-Bearing Pivot: An industry first, the ReMote uses a massive 21mm sealed cartridge bearing for smooth operation and unparalleled modulation. Cable-Kind Clamp: A precision-machined cable path and custom clamping screw with captive washer won't damage cables like more common set screws. As an added bonus, cables can be cut to length and crimped prior to securing. Low-Profile Lever: The ReMote lever sits close to the bar, minimising the distance the thumb must be removed from the grip while reducing the likelihood of knee contact in technical terrain and adds a bit of extra length to overcome stiff dropper internals. Integrated Cable Adjustment: The ReMote solidly-mounted barrel adjuster makes on-the-fly adjustments quick and easy while eliminating the rattles caused by common inline cable adjusters. Breakaway Axle Pivot: Crashes are bad, but expensive crashes are worse. That's why the ReMote features an engineered failure point, allowing the lever to break away from its base in the event of a crash. Replacement axles are inexpensive and readily available from Wolf Tooth. High-Traction Lever: A machined surface ensures that control is not lost, even in the worst of conditions. Broad Compatibility: The ReMote has been tested and is recommended for use with many cable-actuated dropper posts. See the compatibility section below for details. Made in the USA: Wherever the capabilities exist, Wolf Tooth is committed to domestic manufacturing. From lever to packaging, 65% or more of each ReMote is made in the USA.Manufacturer's Part Number: WTREMOTEISIIBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Hope Remote Dropper LeverThe Hope Remote Dropper Lever from Wolf Tooth is designed and created to improve upon the function and ergonomics commonly found on common dropper seatpost remotes. This remote dropper lever is engineered to offer class-leading performance and an elegant and durable package.Solve common dropper remote complaints with the compact, ergonomic and sturdy ReMote dropper lever. Beginning with a long list of rider and mechanic requests, the Wolf Tooth team set out to address each and every one. From its hassle-free installation to smooth ball bearing action, to the engineered failure point, the lightweight ReMote leads in every category. CompatibilityReMote for Hope is only compatible with Tech3 brakes. There are two generations of Hope Tech 3 brakes. Wolf Tooth's ReMote is designed to work with the early model of the Tech 3 brake levers. The newer model of the Tech 3 brakes has a threaded hole and will require some modifications to the ReMote base. Up Front Cable FixingThe dropper cable is attached at the lever, making setup and adjustment quick and easy. Simply secure cable at seatpost using stock barrel or cable clamp and route to bar for a significant reduction in installation time and frustration. Large Diameter Ball-Bearing PivotAn industry first, the ReMote uses a massive 21mm sealed cartridge bearing for smooth operation and unparalleled modulation. Cable-Kind ClampA precision-machined cable path and custom clamping screw with a captive washer won't damage cables like more common set screws. As an added bonus, cables can be cut to length and crimped prior to securing. Low-Profile, Light Action LeverThe ReMote lever sits close to the bar, minimising the distance the thumb must be removed from the grip while reducing the likelihood of knee contact in technical terrain and adding a bit of extra length to overcome stiff dropper internals. Integrated Cable AdjustmentThe ReMote solidly-mounted barrel adjuster makes on-the-fly adjustments quick and easy while eliminating the rattles caused by common inline cable adjusters. Breakaway Axle PivotCrashes are bad, but expensive crashes are worse. That's why the ReMote features an engineered failure point, allowing the lever to break away from its base in the event of a crash. High-Traction LeverA machined surface ensures that control is not lost- even in the worst of conditions. Wherever the capabilities exist, Wolf Tooth is committed to domestic manufacturing. From lever to packaging, 65% or more of each ReMote is made in the USA. Features: ReMote Hope for Tech3 Hope Brakes - Includes Hope hardware Material: 6061 T6 Aluminium with Delrin axle Use: MTB Compatibility: All cable-actuated dropper posts Type: Cable-actuated remote Lever Length: 46.3mm Made in the USA Weight: 36gBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Magura Remote Dropper LeverThis dropper seatpost lever is developed for use with Magura brakes. Thanks to its robust 6061 T6 aluminium construction, it's tough and reliable as you tackle demanding mountain terrain conditions. Ergonomic and easy to install, this dropper lever makes it easy to change your seatpost positioning without having to stop your ride. Its sealed cartridge bearings and textured lever also make it a perfect choice for smooth and consistent operation in all weather and terrain conditions.Solve common dropper remote complaints with the compact, ergonomic and sturdy ReMote dropper lever.Beginning with a long list of rider and mechanic requests, the Wolf Tooth team set out to address each and every one. From its hassle-free installation, to smooth ball bearing action, to the engineered failure point, the lightweight ReMote leads in every category.Features: Body Material: 6061 T6 Aluminium Axle Material: Delrin Use: Mountain Bike (MTB) Clamp Type: Magura Clamp Included: Yes Ergonomic Easy to Install Sealed cartridge bearings Textured lever Made in USATechnologies: UpFront cable fixing: The dropper cable is attached at the lever, making setup and adjustment quick and easy. Simply secure cable at seatpost using stock barrel or cable clamp and route to bar for a significant reduction in installation time and frustration. Large-diameter ball-bearing pivot: An industry first, the ReMote uses a massive 21mm sealed cartridge bearing for smooth operation and unparalleled modulation. Cable-kind clamp: A precision-machined cable path and custom clamping screw with captive washer won't damage cables like more common set screws. As an added bonus, cables can be cut to length and crimped prior to securing. Low-profile lever: The ReMote lever sits close to the bar, minimizing the distance the thumb must be removed from the grip while reducing the likelihood of knee contact in technical terrain and adds a bit of extra length to overcome stiff dropper internals. Integrated cable adjustment: The ReMote solidly-mounted barrel adjuster makes on-the-fly adjustments quick and easy while eliminating the rattles caused by common inline cable adjusters. Breakaway axle pivot: Crashes are bad, but expensive crashes are worse. That's why the ReMote features an engineered failure point, allowing the lever to break away from its base in the event of a crash. Replacement axles are inexpensive and readily available from Wolf Tooth. High-traction lever: A machined surface ensures that control is not lost, even in the worst of conditions. Broad compatibility: The ReMote has been tested and is recommended for use with many cable-actuated dropper posts. See the compatibility section below for details. Made in the USA: Wherever the capabilities exist, Wolf Tooth is committed to domestic manufacturing. From lever to packaging, 65% or more of each ReMote is made in the USA.Manufacturer's Part Number: WTREMOTEMAGURABuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Dropper Seatpost Remote Lever Compatible with all mechanical (cable operated) dropper seatposts and created to give your bars a clean look, this universal dropper seatpost remote lever works brings you fast, accurate and smooth control of your saddle height. Made by Wolf Tooth from a tough 6061 T6 aluminium, it’s ready for aggressive use as you drop your saddle out of the way for wild descents and raise it back up for more attacking the climbs more efficiently.Low-Profile Dropper LeverEasy to use, this tough component is kitted out with a low-profile lever that sits close to your handlebar. This minimises the gap between your bar and your thumb for superior control that feels like a natural extension of one of your limbs. Also, to reduce the likelihood of knee contact in technical terrain sections, it offers more space around your bars to overcome challenging riding situations.Integrated Cable AdjustmentEquipped with a barrel adjuster, this top-quality component allows you to make on-the-fly changes quick and easy. This eliminates the rattles caused by common inline cable adjusters for a cleaner and more reliable rider-tuned set-up.Features:Body Material: 6061 T6 AluminiumAxle Material: DelrinUse: Mountain Bike (MTB)Clamp Compatibility: Various options availableWeight: 38.5g (approx.)Please Note: The "Matchmaker X" and Shimano IS-EV" options are designed to combine with compatible brake levers, they do not come with their own round handlebar clamps.Technologies:UpFront Cable Fixing: The dropper cable is attached at the lever, making setup and adjustment quick and easy. Simply secure cable at seatpost using stock barrel or cable clamp and route to bar for a significant reduction in installation time and frustrationLarge Diameter Ball-Bearing Pivot: An industry first, the ReMote LA uses a massive 21mm sealed cartridge bearing for smooth operation and unparalleled modulationCable-Kind Clamp: A precision-machined cable path and custom clamping screw with captive washer won’t damage cables like more common set screws. As an added bonus, cables can be cut to length and crimped prior to securingLow-Profile, Light Action lever: The ReMote LA (light action) lever sits close to the bar, minimising the distance the thumb must be removed from the grip while reducing the likelihood of knee contact in technical terrain and adds a bit of extra length to overcome stiff dropper internalsIntegrated Cable Adjustment: The ReMote LA’s barrel adjuster makes on-the-fly adjustments quick and easy while eliminating the rattles caused by common inline cable adjustersBreakaway Axle Pivot: Crashes are bad, but expensive crashes are worse. That’s why the ReMote features an engineered failure point, allowing the lever to break away from its base in the event of a crash. Replacement axles are inexpensive and readily available hereHigh-traction Lever: A machined surface ensures that control is not lost- even in the worst of conditionsMade in the USA: Wherever the capabilities exist, Wolf Tooth is committed to domestic manufacturing. From lever to packaging, 65% or more of each ReMote is made in the USABuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth 104 BCD ChainringPropelling you across the forest with power and poise, this brilliant component uses Wolf Tooth's patented Drop Stop tooth design. This technology enables it to be classed as one of the best-performing and longest-lasting wide/narrow chainrings on the market. It works by using its wide side to maintain maximum contact with the drive side which spreads the loads and improves chainring life. Also, its narrow side allows for excellent mud and debris clearance which reduces friction. Compatibility:Fits any 104 BCD cranksetChainring Bolts: All tooth sizes require 1x bolts that are 6mm long with exception to 30t rings which are threaded and require bolts that are 7-10mm long. Wolf Tooth carries both sizes in a variety of colours104 x 30t - use 10mm bolts104 x 32t, 34t, 36t, 38t use 6mm bolts. If using a bashring you will need 8mm bolts (most stock bolts on 3x cranksets are 8mm)32t 104 BCD chainrings work on many older 2x Shimano crankset (XT, SLX, or Deore)The 30t x 104BCD chainring is the only available ring for the QUARQTM power meterDrivetrains: 1x9, 1x10, 1x11 and 1x12 drivetrainsCompatible with all 10-, 11-, and 12-speed chains except Shimano 12-speed chainsShimano 12-speed chains require the use of our Shimano 12-speed specific chainringsIf using a 9-speed drivetrain use a 10-speed chain. It fits tighter for better chain retentionFeatures: Body Material: 7075-T6 Aluminium Use: MTB BCD: 104mm Tooth Count: 32T Bolt: 4-bolt Weight: 47g (approx)Buy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Hope Light Action Remote Dropper LeverThis mountain bike dropper seat post lever is engineered to make operation as simple as possible on your off-road adventures. Specifically designed for use with Hope cable-actuated dropper posts, this Light Action model has a longer lever arm when compared to Wolf Tooth's standard ReMote model. As a result, the actuation force is reduced by a third and riders can enjoy a lighter and smoother feel.Beginning with a long list of rider and mechanic requests, the Wolf Tooth team set out to address each and every one. Based on rider feedback and tailored to work with some posts' stiffer internal springs, the ReMote LA is also the choice of those with thumb injuries or reduced hand strength. From its hassle-free installation to smooth ball bearing action to engineered failure point, the lightweight ReMote leads in every category. CompatibilityReMote for Hope is only compatible Tech 3 brakes. There are two generations of Hope Tech 3 brakes. Wolf Tooth's ReMote is designed to work with the early model of the Tech 3 brake levers. The newer model of the Tech 3 brakes has a threaded hole and will require some modifications to the ReMote base. Features: Material: 6061 T6 Aluminium with Delrin axle Use: MTB Compatibility: Hope cable actuated dropper seat postsType: Light Action remoteLever Length: 57.1mm Made in the USAWeight: 36gTechnologies: Up Front Cable Fixing: The dropper cable is attached at the lever, making setup and adjustment quick and easy. Simply secure cable at seatpost using stock barrel or cable clamp and route to bar for a significant reduction in installation time and frustration. Large Diameter Ball-Bearing Pivot: An industry first, the ReMote LA uses a massive 21mm sealed cartridge bearing for smooth operation and unparalleled modulation. Cable-Kind Clamp: A precision-machined cable path and custom clamping screw with captive washer won't damage cables like more common set screws. As an added bonus, cables can be cut to length and crimped prior to securing.Low-Profile, Light Action lever: The ReMote LA lever sits close to the bar, minimising the distance the thumb must be removed from the grip while reducing the likelihood of knee contact in technical terrain and adds a bit of extra length to overcome stiff dropper internals.Integrated Cable Adjustment: The ReMote LA's solidly-mounted barrel adjuster makes on-the-fly adjustments quick and easy while eliminating the rattles caused by common inline cable adjusters.Breakaway Axle Pivot: Crashes are bad, but expensive crashes are worse. That's why the ReMote features an engineered failure point, allowing the lever to break away from its base in the event of a crash.High-Traction Lever: A machined surface ensures that control is not lost- even in the worst of conditions.Made in the USA: Wherever the capabilities exist, Wolf Tooth is committed to domestic manufacturing. From lever to packaging, 65% or more of each ReMote is made in the USA.Buy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Propelling you across the woodland with power and poise, this fantastic component uses Wolf Tooth's patented Drop Stop tooth design. This technology enables it to be classed as one of the best-performing and longest-lasting wide/narrow chainrings on the market. It works by using its wide side to maintain maximum contact with the drive side which spreads the loads and improves chainring life. Also, its narrow side allows for excellent mud and debris clearance which reduces friction. Compatibility: Fits any 104 BCD crankset Chainring Bolts: All tooth sizes require 1x bolts that are 6mm long with exception to 30t rings which are threaded and require bolts that are 7-10mm long. Wolf Tooth carries both sizes in a variety of colors 104 x 30t - use 10mm bolts 104 x 32t, 34t, 36t, 38t use 6mm bolts. If using a bashring you will need 8mm bolts (most stock bolts on 3x cranksets are 8mm) 32t 104 BCD chainrings work on many older 2x Shimano crankset (XT, SLX, or Deore) The 30t x 104BCD chainring is the only available ring for the QUARQTM power meter Drivetrains: 1x9, 1x10, 1x11 and 1x12 drivetrains Compatible with all 10-, 11-, and 12-speed chains except Shimano 12-speed chains Shimano 12-speed chains require the use of our Shimano 12-speed specific chainrings If using a 9-speed drivetrain use a 10-speed chain. It fits tighter for better chain retention
Wolf Tooth 104 BCD ChainringPropelling you across the forest with power and poise, this brilliant component uses Wolf Tooth's patented Drop Stop tooth design. This technology enables it to be classed as one of the best-performing and longest-lasting wide/narrow chainrings on the market. It works by using its wide side to maintain maximum contact with the drive side which spreads the loads and improves chainring life. Also, its narrow side allows for excellent mud and debris clearance which reduces friction. Compatibility:Fits any 104 BCD cranksetChainring Bolts: All tooth sizes require 1x bolts that are 6mm long with exception to 30t rings which are threaded and require bolts that are 7-10mm long. Wolf Tooth carries both sizes in a variety of colours104 x 30t - use 10mm bolts104 x 32t, 34t, 36t, 38t use 6mm bolts. If using a bashring you will need 8mm bolts (most stock bolts on 3x cranksets are 8mm)32t 104 BCD chainrings work on many older 2x Shimano crankset (XT, SLX, or Deore)The 30t x 104BCD chainring is the only available ring for the QUARQTM power meterDrivetrains: 1x9, 1x10, 1x11 and 1x12 drivetrainsCompatible with all 10-, 11-, and 12-speed chains except Shimano 12-speed chainsShimano 12-speed chains require the use of our Shimano 12-speed specific chainringsIf using a 9-speed drivetrain use a 10-speed chain. It fits tighter for better chain retentionFeatures: Body Material: 7075-T6 Aluminium Use: MTB BCD: 104mm Tooth Count: 32T Bolt: 4-bolt Weight: 47g (approx)Buy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Direct Mount Mountain Bike Chain RingThis high-quality chainring is perfect for fast and rowdy MTB use as it delivers powerful torque performance as you blast across the mountains. It features a rock-solid aluminium construction which makes it exceptional at handling the increased pressure which comes with all-day epics and off-road adventures. Developed or use with your SRAM crankset which has SDM fitment, this fantastic component replaces your existing upper spider and chainring with one lightweight component.Features: Material: 7075-T6 Aluminium Use: Mountain Bike (MTB) and Road Mount: Direct Mount Compatibility: SRAM cranksets with SDM fitment Weight: 65g (32T); 90g (38T) and 111g (42T)Compatibility Information:These direct mount chainrings will replace your existing chainring and spider or replace the direct mount ring on SRAM cranksets including the DUB cranks. The ring is attached via 3 bolts on the back side of the spider near the spindle. Note that the SRAM 12spd Red and Force AXS use a different 8 bolt mounting interface that is not compatible with these chainrings.Wolf Tooth's patented Drop-Stop wide/narrow tooth profile for the ultimate chain retention and mud shedding ability.Chain Compatibility:- All 9, 10, 11 speed chains as well as 12 speed SRAM Eagle, Campagnolo, KMC and SRAM Flat Top AXS chains - They do not work with Shimano 12 speed Hyperglide+ chains.- Shimano 12-speed chains require the use of our Shimano 12-speed specific chainrings.- If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention.Buy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Wolf Tooth CAMO Aluminium Chainring is not only beautifully machined and lightweight but utilises a patented wide-narrow design that is perfectly suited to 1x set ups – dropped chains are a thing of the past. Unlock your dream drivetrain configuration and satisfy your inner tweaker.Bred from ice-cold Minneapolis winters and explicitly designed to work perfectly with Wolf Tooth's CAMO Spider, this chainring means more time riding and less time fumbling with dropped chains.In line with Wolf Tooth’s guiding ethos of providing unrivalled design innovation, reliability and durability, this chainring employs a patented Drop-Stop® wide-narrow tooth profile which not only keeps the chain securely in place on single chainring setups but dislodges mud, dirt and excess precipitation more efficiently. For additional security in extreme conditions, this chainring is best used with a clutch-type rear derailleur.Synonymous with ultra-high-end custom builds and stalwart steeds alike, Wolf Tooth chainrings are machined entirely in-house at Wolf Tooth’s HQ in Minnesota, USA. The anodised finish and machined lettering that adorn every chainring bear the hallmark of master craftsmanship. If you’re a discerning cyclist looking to invest in a premium-grade chainring that’ll outlast its competitors and function perfectly on a 1x set up, this is the only way to go.Wolf Tooth developed the Chainline and Material Optimisation (CAMO) design so that you can replace your stock direct mount style chainrings with a spider and traditional chainring set up.The spider used in conjunction with a Wolf Tooth chainring means that you can set up the perfect chainline for greater shifting precision, reduces the cost of future replacement chainrings and enables you to add a flash of colour to your ride.Compatibility:Compatible with Wolf Tooth CAMO spiders. It is NOT compatible with any other chainring mountings,You will require a CAMO spider to fit this chainring, this is sold separately,For 1x9, 1x10,1x11 and 1x12 drivetrains (including SRAM Eagle),Compatible with all 10, 11, and 12-speed chains except Shimano 12-speed chains.,If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention)..
Wolf Tooth Race Face Cinch Direct Mount Chain RingDeveloped for unrivalled innovation, reliability and durability, this direct mount chainring features a patented Drop-Stop wide-narrow tooth profile. This means that you'll benefit from its excellent chain stability on your single speed setups, while it also dislodges mud, dirt and excess debris more efficiently. The result is a more reliable and cleaner chainring setup. These chainrings are for Race Face Cinch cranks such as Turbine, Next SL, Sixc & Aeffect. The Wolf Tooth Cinch rings feature Wolf Tooth's patented Drop-Stop design for the best wear life, chain retention and mud clearance. Compatibility:Any Race Face Cinch system crankset.Wolf Tooth's patented Drop-Stop wide/narrow tooth profile for the ultimate chain retention and mud shedding abilityFor 1x9, 1x10, 1x11 and 1x12 drivetrains (including SRAM Eagle).Compatible with all 10, 11, and 12-speed chains except Shimano 12-speed chains.If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention).Features: Material: 7075-T6 Aluminium Speed: Single speed Mount: Direct mount Number of Chainrings in Box: One Crank Compatibility: Race Face CinchChainline: 52mm BoostOffset: 3mmMade in the USA Part Numbers: 32T: WTRFC32BST; 34T: WTRFC34BST; 36T: WTRFC36BST Weight: 32T: 58g; 34T: 69g; 36T: 75gBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Designed for the rigours of today's mountain bike (MTB) trail riding disciplines, this dropper post lever is fully-equipped for wherever your next adventure takes you. It includes a hinged handlebar clamp for 22.2mm handlebars, allowing you to easily install it and enjoy quick and intuitive operation. All mountain bike handlebars are 22.2mm where your shift and brake levers attach, even on 31.8mm handlebars. (31.8mm and 35mm handlebars just refer to the diameter where the stem clamps). Attach with 1-2nm max. Solve common dropper remote complaints with the compact, ergonomic and sturdy ReMote dropper lever. Beginning with a long list of rider and mechanic requests, the Wolf Tooth team set out to address each and every one. From its hassle-free installation, to smooth ball bearing action, to the engineered failure point, the lightweight ReMote leads in every category. UpFront cable fixing: The dropper cable is attached at the lever, making setup and adjustment quick and easy. Simply secure cable at seatpost using stock barrel or cable clamp and route to bar for a significant reduction in installation time and frustration. Large-diameter ball-bearing pivot: An industry first, the ReMote uses a massive 21mm sealed cartridge bearing for smooth operation and unparalleled modulation. Cable-kind clamp: A precision-machined cable path and custom clamping screw with captive washer won’t damage cables like more common set screws. As an added bonus, cables can be cut to length and crimped prior to securing. Low-profile lever: The ReMote lever sits close to the bar, minimizing the distance the thumb must be removed from the grip while reducing the likelihood of knee contact in technical terrain and adds a bit of extra length to overcome stiff dropper internals. Integrated cable adjustment: The ReMote solidly-mounted barrel adjuster makes on-the-fly adjustments quick and easy while eliminating the rattles caused by common inline cable adjusters. Breakaway axle pivot: Crashes are bad, but expensive crashes are worse. That’s why the ReMote features an engineered failure point, allowing the lever to break away from its base in the event of a crash. Replacement axles are inexpensive and readily available from Wolf Tooth. High-traction lever: A machined surface ensures that control is not lost, even in the worst of conditions. Broad compatibility: The ReMote has been tested and is recommended for use with many cable-actuated dropper posts. See the compatibility section below for details. Made in the USA: Wherever the capabilities exist, Wolf Tooth is committed to domestic manufacturing. From lever to packaging, 65% or more of each ReMote is made in the USA. Manufacturer's Part Number: WTREMOTECLMP Black 22.2mm
Wolf Tooth Remote Dropper LeverDeveloped for the demands of today's mountain bike (MTB) trail riding disciplines, this dropper post lever includes a hinged handlebar clamp for 22.2mm handlebars, allowing you to easily install it and enjoy quick and intuitive operation. All mountain bike handlebars are 22.2mm where your shift and brake levers attach, even on 31.8mm handlebars. (31.8mm and 35mm handlebars just refer to the diameter where the stem clamps). Attach with 1-2nm max.Solve common dropper remote complaints with the compact, ergonomic and sturdy ReMote dropper lever.Beginning with a long list of rider and mechanic requests, the Wolf Tooth team set out to address each and every one. From its hassle-free installation, to smooth ball bearing action, to the engineered failure point, the lightweight ReMote leads in every category.Features: Body Material: 6061 T6 Aluminium Axle Material: Delrin Use: Mountain Bike (MTB) Clamp Size: 22.2mm Clamp Included: Yes Ergonomic Easy to Install Sealed cartridge bearings Textured lever Made in USATechnologies: UpFront Cable Fixing: The dropper cable is attached at the lever, making setup and adjustment quick and easy. Simply secure cable at seatpost using stock barrel or cable clamp and route to bar for a significant reduction in installation time and frustration. Large-Diameter Ball-Bearing Pivot: An industry first, the ReMote uses a massive 21mm sealed cartridge bearing for smooth operation and unparalleled modulation. Cable-Kind Clamp: A precision-machined cable path and custom clamping screw with captive washer won't damage cables like more common set screws. As an added bonus, cables can be cut to length and crimped prior to securing. Low-Profile Lever: The ReMote lever sits close to the bar, minimising the distance the thumb must be removed from the grip while reducing the likelihood of knee contact in technical terrain and adds a bit of extra length to overcome stiff dropper internals. Integrated Cable Adjustment: The ReMote solidly-mounted barrel adjuster makes on-the-fly adjustments quick and easy while eliminating the rattles caused by common inline cable adjusters. Breakaway Axle Pivot: Crashes are bad, but expensive crashes are worse. That's why the ReMote features an engineered failure point, allowing the lever to break away from its base in the event of a crash. Replacement axles are inexpensive and readily available from Wolf Tooth. High-Traction Lever: A machined surface ensures that control is not lost, even in the worst of conditions. Broad Compatibility: The ReMote has been tested and is recommended for use with many cable-actuated dropper posts. See the compatibility section below for details. Made in the USA: Wherever the capabilities exist, Wolf Tooth is committed to domestic manufacturing. From lever to packaging, 65% or more of each ReMote is made in the USA.Manufacturer's Part Number: WTREMOTECLMP Black 22.2mmBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
This 12 speed chainring features Wolf Tooth's patented Drop-Stop narrow-wide tooth profile, which provides fantastic chain retention and durability on every ride. Another highlight is this model also prevents premature ring and chain wear that's normally associated with non-optimised tooth profiles. The result is a stronger and more dependable chainring with exceptional longevity. 104 BCD is the most common bolt pattern on double and triple cranksets and happens to be the first product ever made my Wolf Tooth Components. The Drop-Stop® tooth design is the best performing and longest lasting wide/narrow chainrings on the market. Fits any 104 BCD crankset. Drop-Stop technology. On Wolf Tooth’s patented wide/narrow chainring, the wide side of the tooth has maximum contact on the drive side which spreads the load and improves chainring life. The narrow side allows clearance for mud and debris which reduces friction. Alternating wide/narrow tooth pattern prevents chain derailment. Compatibility: Fits any 104 BCD crankset. Compatible with Shimano 12-speed Hyperglide+ chains. Chainring Bolts: All tooth sizes require 1x bolts that are 6mm long with exception to 30t rings which are threaded and require bolts that are 7-10mm long. Wolf Tooth carries both sizes in a variety of colours. 104 x 30T - use 10mm bolts. 104 x 32t, 34t, 36t, 38t use 6mm bolts. If using a bashring you will need 8mm bolts (most stock bolts on 3x cranksets are 8mm). 104 BCD chainrings work on many older 2x Shimano crankset (XT, SLX, or Deore).
Wolf Tooth Shimano 12 Speed MTB Chain Ring 104 BCDThis 104mm BCD chainring is specifically designed for use with Shimano XTR, XT, and SLX 12 speed Hyperglide+ chains. It features Wolf Tooth's patented Drop-Stop narrow-wide tooth profile, which provides fantastic chain retention and durability on every ride. Another highlight is this model also prevents premature ring and chain wear that's normally associated with non-optimised tooth profiles. The result is a stronger and more dependable chainring with exceptional longevity.104 BCD is the most common bolt pattern on double and triple cranksets and happens to be the first product ever made my Wolf Tooth Components. The Drop-Stop tooth design is the best performing and longest lasting wide/narrow chainrings on the market.Fits any 104 BCD crankset.Drop-Stop technology. On Wolf Tooth's patented wide/narrow chainring, the wide side of the tooth has maximum contact on the drive side which spreads the load and improves chainring life. The narrow side allows clearance for mud and debris which reduces friction.Alternating wide/narrow tooth pattern prevents chain derailment.Compatibility:Fits any 104 BCD crankset.Compatible with Shimano 12-speed Hyperglide+ chains.Chainring Bolts: All tooth sizes require 1x bolts that are 6mm long with exception to 30t rings which are threaded and require bolts that are 7-10mm long. Wolf Tooth carries both sizes in a variety of colours.104 x 30T - use 10mm bolts.104 x 32t, 34t, 36t, 38t use 6mm bolts.If using a bashring you will need 8mm bolts (most stock bolts on 3x cranksets are 8mm).104 BCD chainrings work on many older 2x Shimano crankset (XT, SLX, or Deore).Features: Material: 7075-T6 Aluminium Use: MTB BCD: 104mm Speed: 12 speed Number of Chainrings in the Box: One Made in the USA Part Numbers: 32T: WT10432SH12; 34T: WT10434SH12 and 36T: WT10436SH12 Weight: 32T: 47g; 34T: 56g and 36T: 60gBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Shimano 12 Speed MTB Chain Ring 104 BCDThis 104mm BCD chainring is specifically designed for use with Shimano XTR, XT, and SLX 12 speed Hyperglide+ chains. It features Wolf Tooth's patented Drop-Stop narrow-wide tooth profile, which provides fantastic chain retention and durability on every ride. Another highlight is this model also prevents premature ring and chain wear that's normally associated with non-optimised tooth profiles. The result is a stronger and more dependable chainring with exceptional longevity.104 BCD is the most common bolt pattern on double and triple cranksets and happens to be the first product ever made my Wolf Tooth Components. The Drop-Stop tooth design is the best performing and longest lasting wide/narrow chainrings on the market.Fits any 104 BCD crankset.Drop-Stop technology. On Wolf Tooth's patented wide/narrow chainring, the wide side of the tooth has maximum contact on the drive side which spreads the load and improves chainring life. The narrow side allows clearance for mud and debris which reduces friction.Alternating wide/narrow tooth pattern prevents chain derailment.Compatibility:Fits any 104 BCD crankset.Compatible with Shimano 12-speed Hyperglide+ chains.Chainring Bolts: All tooth sizes require 1x bolts that are 6mm long with exception to 30t rings which are threaded and require bolts that are 7-10mm long. Wolf Tooth carries both sizes in a variety of colours.104 x 30T - use 10mm bolts.104 x 32t, 34t, 36t, 38t use 6mm bolts.If using a bashring you will need 8mm bolts (most stock bolts on 3x cranksets are 8mm).104 BCD chainrings work on many older 2x Shimano crankset (XT, SLX, or Deore).Features: Material: 7075-T6 Aluminium Use: MTB BCD: 104mm Speed: 12 speed Number of Chainrings in the Box: One Made in the USA Part Numbers: 32T: WT10432SH12; 34T: WT10434SH12 and 36T: WT10436SH12 Weight: 32T: 47g; 34T: 56g and 36T: 60gBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Shimano 12 Speed MTB Chain Ring 104 BCDThis 104mm BCD chainring is specifically designed for use with Shimano XTR, XT, and SLX 12 speed Hyperglide+ chains. It features Wolf Tooth's patented Drop-Stop narrow-wide tooth profile, which provides fantastic chain retention and durability on every ride. Another highlight is this model also prevents premature ring and chain wear that's normally associated with non-optimised tooth profiles. The result is a stronger and more dependable chainring with exceptional longevity.104 BCD is the most common bolt pattern on double and triple cranksets and happens to be the first product ever made my Wolf Tooth Components. The Drop-Stop tooth design is the best performing and longest lasting wide/narrow chainrings on the market.Fits any 104 BCD crankset.Drop-Stop technology. On Wolf Tooth's patented wide/narrow chainring, the wide side of the tooth has maximum contact on the drive side which spreads the load and improves chainring life. The narrow side allows clearance for mud and debris which reduces friction.Alternating wide/narrow tooth pattern prevents chain derailment.Compatibility:Fits any 104 BCD crankset.Compatible with Shimano 12-speed Hyperglide+ chains.Chainring Bolts: All tooth sizes require 1x bolts that are 6mm long with exception to 30t rings which are threaded and require bolts that are 7-10mm long. Wolf Tooth carries both sizes in a variety of colours.104 x 30T - use 10mm bolts.104 x 32t, 34t, 36t, 38t use 6mm bolts.If using a bashring you will need 8mm bolts (most stock bolts on 3x cranksets are 8mm).104 BCD chainrings work on many older 2x Shimano crankset (XT, SLX, or Deore).Features: Material: 7075-T6 Aluminium Use: MTB BCD: 104mm Speed: 12 speed Number of Chainrings in the Box: One Made in the USA Part Numbers: 32T: WT10432SH12; 34T: WT10434SH12 and 36T: WT10436SH12 Weight: 32T: 47g; 34T: 56g and 36T: 60gBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Race Face Cinch Direct Mount Chain RingDeveloped for unrivalled innovation, reliability and durability, this direct mount chainring features a patented Drop-Stop wide-narrow tooth profile. This means that you'll benefit from its excellent chain stability on your single speed setups, while it also dislodges mud, dirt and excess debris more efficiently. The result is a more reliable and cleaner chainring setup. These chainrings are for Race Face Cinch cranks such as Turbine, Next SL, Sixc & Aeffect. The Wolf Tooth Cinch rings feature Wolf Tooth's patented Drop-Stop design for the best wear life, chain retention and mud clearance. Compatibility:Any Race Face Cinch system crankset.Wolf Tooth's patented Drop-Stop wide/narrow tooth profile for the ultimate chain retention and mud shedding abilityFor 1x9, 1x10, 1x11 and 1x12 drivetrains (including SRAM Eagle).Compatible with all 10, 11, and 12-speed chains except Shimano 12-speed chains.If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention).Features: Material: 7075-T6 Aluminium Speed: Single speed Mount: Direct mount Number of Chainrings in Box: One Crank Compatibility: Race Face CinchChainline: 52mm BoostOffset: 3mmMade in the USA Part Numbers: 32T: WTRFC32BST; 34T: WTRFC34BST; 36T: WTRFC36BST Weight: 32T: 58g; 34T: 69g; 36T: 75gBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth Cyclocross 130 BCD ChainringThis chainring is specifically designed for cyclocross use. It features Wolf Tooth's renowned Drop-Stop technology, which uses a patented wide/narrow chainring profile to spread the load and improve chainring life. In addition, it also allows for excellent mud clearance, which results in reduced friction. This makes it a great choice of upgrade for multiple riding disciplines from cyclocross to commuting.Wolf Tooth was first to market with cyclocross 1x specific chainrings because we saw cyclocross as the perfect use for our Drop-Stop technology. Since their release, the uses for these rings has expanded beyond cyclocross to commuting, gravel riding, and even full on-road applications with the giant 52T rings. Fits 130 BCD 5 arm cranksets. Drop-Stop technology. On Wolf Tooth's patented wide/narrow chainring, the wide side of the tooth has maximum contact on the drive side which spreads the load and improves chainring life. The narrow side allows clearance for mud and debris which reduces friction. Alternating wide/narrow tooth pattern prevents chain derailment. Compatibility:These rings are for use with 130 BCD 5 arm cranksets. Do NOT fit on the cranksets for Shimano DA 9000 / Ultegra 6800. Not compatible with Campy CX10/11. Chain Compatibility:10, 11, & 12spd Eagle and Flattop - These chainrings are designed to work with all 10-speed and 11-speed chains. They also work with 12 speed SRAM Flattop, SRAM Eagle and KMC chain. They do not work with Shimano 12 speed Hyperglide+ chain. If using a 9-speed drivetrain use a 10-speed chain as it fits tighter for better chain retention. SRAM Exogram cranksets with inset nut must use stock fifth bolt + spacer(s). The Force CX1 bolt features fifth bolt with a 1x specific shoulder. This kit can be found online. Can be mounted in either the big or small ring position of a double crankset given chainstay clearance in the small ring position. 38T important note: The chain may contact the spider arm slightly when using the 38T chainring. We recommend filing a small chamfer on the spider arm but you can also just install it and let the chain do the work. This is only an issue with the 38T as the 130 BCD was designed for a 39T smallest ring. Features: Material: 7075-T6 Aluminium Use: Cyclocross BCD: 130mm Number of Chainrings in the Box: One Made in the USA Part Numbers: 38T: WT13038; 40T: WT13040; 42T: WT13042; 44T: WT13044; 46T: WT13046; 48T: WT13048; 50T: WT13050 and 52T: WT13052 Weight: 38T: 52g; 40T: 60g; 42T: 62g; 44T: 79g; 52T: 132gBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.