Key Features:Machined from 7075-t6 aluminium in Minneapolis, USA.,Includes the wrench only. Steel inserts are not included but can be purchased separately or as a set.,1-inch hex drive interface compatible – inset magnets enable quick coupling and decoupling of steel inserts.,16-notch 44 mm bottom bracket tool (or centerlock rotor tool) compatible,Weight - 88g.
Wolf Tooth - Precision Is Integrated Standard HeadsetAny Frame That Uses Is (Integrated Standard) Headsets With 41mm Upper And 52mm Lower Outer Bearing Diameter,Uppers And Lowers Sold Separately,Enduro Stainless Steel Sealed Bearings Included On Both The Upper And Lower,.Upper Assembly Features:Ultralight Stem Cap With Integrated Spacer Plus An Aluminium Bolt And A Star Nut,7, 15 And 25mm Stack Height Top Cover Options (7mm Cover = 8mm Total Stack, 15mm Cover = 15mm Total Stack, 25mm Cover = 25mm Total Stack,O-ring Seal Prevents Water Intrusion Around The Steerer Tube,Custom Moulded Upper Lip Seal Provides Additional Protection For The Upper Bearing,.Lower Assembly Features:Custom Moulded Dual Lip Seal On The Crown Race To Protect The Lower Bearing In The Toughest Conditions.
The Wolf Tooth Direct Mount Chainring for Race Face Cinch is not only beautifully machined and lightweight but utilises a patented wide-narrow design that is perfectly suited to 1x setups – dropped chains are a thing of the past. Unlock your dream drivetrain configuration and satisfy your inner tweaker.Bred from ice-cold Minneapolis winters and explicitly designed to work perfectly with Race Face Cinch cranks, this direct mount chainring means more time riding and less time fumbling with dropped chains.In line with Wolf Tooth’s guiding ethos of providing unrivalled design innovation, reliability and durability, this chainring employs a patented Drop-Stop® wide-narrow tooth profile which not only keeps the chain securely in place on single chainring setups but dislodges mud, dirt and excess precipitation more efficiently. For additional security in extreme conditions, this chainring is best used with a clutch-type rear derailleur.Synonymous with ultra-high-end custom builds and stalwart steeds alike, Wolf Tooth chainrings are machined entirely in-house at Wolf Tooth’s HQ in Minnesota, USA. The anodised finish and machined lettering that adorn every chainring bear the hallmark of master craftsmanship.If you’re a discerning cyclist looking to invest in a premium-grade chainring that’ll outlast its competitors and function perfectly on a 1x set up, this is the only way to go.Compatibility:Any Race Face Cinch™ system crankset.,Wolf Tooth’s patented Drop-Stop® wide/narrow tooth profile for the ultimate chain retention and mud shedding ability,Both standard (142mm rear hub spacing) and Boost (148mm hub spacing) offsets available. ,For 1x9, 1x10, 1x11 and 1x12 drivetrains (including SRAM Eagle),Compatible with all 10, 11, and 12-speed chains except Shimano 12-speed chains.,If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention).,Chainline: Standard Offset 49mm for 26-34t, 51mm for 36t (additional chainstay clearance),Chainline: Boost Offset 52mm .
Key Features:Compatible with a wide range of road, gravel and cyclocross bikes,If your rear derailleur cable is routed internally through the chainstay and exits at the end of the chainstay above the axle or past the axle, you will need to use the inline version which is also available. This is because the tanpan barrel adjuster end sits too close to the frame for the internally routed cable to exit the frame and enter the tanpan barrel adjuster..
The Wolf Tooth 6-Bit Hex Wrench Multi-Tool with Keyring is small enough to tuck into pocket or riding tool wrap, so that you'll never be without the tools you need to conduct simple roadside repairs. Alternatively, a handy keyring attachment means that, should you want it for general use away from the bike, you can keep it close by simply adding it to your keychain.Made from hardy 7075-T6 aluminium, the 6-Bit Hex Wrench Multi-Tool handle will swivel open to reveal six hex bits boasting 11 uses between them, securely held in place by magnets. All these bits are coated with an anti-corrosive layer that will ensure they'll continue to look great and do their job perfectly for a very long time.Should any individual bit be lost or damaged, Wolf Tooth offers the replacement parts required keep your 6-Bit Hex Wrench Multi-Tool in full working order.Key Features:Slim, strong tool with 11 functions,Made from 7075-T6 aluminium,Dimensions 10.16cm x 15.24cm,Six bits are held inside handle by magnets,All bits are ED-coated and corrosion resistant,These include: a 6mm Hex, a 5mm Hex, two double-sided 2.5mm/3mm and 2mm/4mm hexes, a T10/T25 Torx-compatible bit and a flat head #3.5/Phillips #2 screwdriver bit,Ball detent swivel head tested to over 40Nm of torque,Fits into riding tool wrap/pocket,Includes keyring attachment.
Wolf Tooth Shimano Light Action Dropper LeverThis remote dropper lever solves many of the common problems associated with dropper remotes thanks to its compact, ergonomic and sturdy design. It features a hard-wearing aluminium construction with a Delrin axle, making it more than capable of handling all the abuse that's associated with long days in the saddle. Its patent-pending ReMote LA has a longer lever arm than the standard ReMote and is ideal for dropper posts with a harder pull or for riders that just prefer a really light actuation feel. It reduces the force to actuate a dropper by nearly a third of the standard ReMote.Beginning with a long list of rider and mechanic requests, the Wolf Tooth team set out to address each and every one. Based on rider feedback and tailored to work with some posts' stiffer internal springs, the ReMote LA is also the choice of those with thumb injuries or reduced hand strength. From its hassle-free installation to smooth ball bearing action to engineered failure point, the lightweight ReMote leads in every category.CompatibilityCompatible with all cable-actuated dropper posts. Works with dropper posts that have the barrel end of the cable at the remote and those that have the barrel end at the post. Measure the pivot centre to end of your current lever. If it is greater than 52mm the Light Action will work best. If it is less than 52mm, the Standard ReMote will work best.Mounting TypesReMote IS-AB for Shimano I-Spec A or B - Includes IS-AB hardware. ReMote IS-EV for Shimano I-Spec EV - Includes IS-EV hardware. ReMote IS-II for Shimano I-Spec II - Includes IS-II hardwareFeatures: Material: 6061 T6 Aluminium with Delrin axle Use: MTB Made in the USA Single or Pair: Single Weight: Shimano IS-AB: 36g; Shimano IS-II: 35g; Shimano IS-EV: 35gTechnologies: UpFront Cable Fixing: The dropper cable is attached at the lever, making setup and adjustment quick and easy. Simply secure cable at seatpost using stock barrel or cable clamp and route to bar for a significant reduction in installation time and frustration. Large Diameter Ball-Bearing Pivot: An industry first, the ReMote LA uses a massive 21mm sealed cartridge bearing for smooth operation and unparalleled modulation. Cable-Kind Clamp: A precision-machined cable path and custom clamping screw with captive washer won't damage cables like more common set screws. As an added bonus, cables can be cut to length and crimped prior to securing. Low-Profile, Light Action Lever: The ReMote LA lever sits close to the bar, minimizing the distance the thumb must be removed from the grip while reducing the likelihood of knee contact in technical terrain and adds a bit of extra length to overcome stiff dropper internals. Integrated Cable Adjustment: The ReMote LA's solidly-mounted barrel adjuster makes on-the-fly adjustments quick and easy while eliminating the rattles caused by common inline cable adjusters. Breakaway Axle Pivot: Crashes are bad, but expensive crashes are worse. That's why the ReMote features an engineered failure point, allowing the lever to break away from its base in the event of a crash. Replacement axles are inexpensive and readily available. High-Traction Lever: A machined surface ensures that control is not lost- even in the worst of conditions. Broad Compatibility: The ReMote LA has been tested and is recommended for use with Thomson, Fox Transfer, Race Face, Easton, and 9point8 cable-actuated dropper posts. Made in the USA: Wherever the capabilities exist, Wolf Tooth is committed to domestic manufacturing. From lever to packaging, 65% or more of each ReMote is made in the USA.Manufacturer's Part Numbers: WTREMOTELAISAB Black Option 1 IS-AB WTREMOTELAISEV Black Option 2 IS-EV WTREMOTELAISII Black Option 3 IS-II Buy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth SRAM Direct Mount Boost MTB Chain RingThe ideal chainring upgrade for the most aggressive mountain bike riders, Wolftooth has constructed this tough and efficient drivetrain component from 7075-T6 aluminium. Precisely machined with a patented narrow-wide tooth design, this boost-bike specific model is perfect for use with 1x12-speed gears and offers you excellent chain retention over the roughest trails.Wolftooth Drop-Stop technologyWolf Tooth has also equipped this version with its game-changing Drop-Stop technology, which keeps your chain securely in place and dislodges mud, dirt and excess water more efficiently. Features: Material: 7075-T6 Aluminium Mount: Direct mount Chainline: 52mm Offset: 3mm Made in the USA Designed for use with bikes with 148mm rear hub spacing Tooth Profile: Narrow-Wide, Woolftooth drop Stop A (optimised for mountain bikes) Part Numbers: Weight: 28T: 59g; 30T: 65g; 32T: 70gBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth SRAM Direct Mount Boost MTB Chain RingThe ideal chainring upgrade for the most aggressive mountain bike riders, Wolftooth has constructed this tough and efficient drivetrain component from 7075-T6 aluminium. Precisely machined with a patented narrow-wide tooth design, this boost-bike specific model is perfect for use with 1x12-speed gears and offers you excellent chain retention over the roughest trails.Wolftooth Drop-Stop technologyWolf Tooth has also equipped this version with its game-changing Drop-Stop technology, which keeps your chain securely in place and dislodges mud, dirt and excess water more efficiently. Features: Material: 7075-T6 Aluminium Mount: Direct mount Chainline: 52mm Offset: 3mm Made in the USA Designed for use with bikes with 148mm rear hub spacing Tooth Profile: Narrow-Wide, Woolftooth drop Stop A (optimised for mountain bikes) Part Numbers: Weight: 28T: 59g; 30T: 65g; 32T: 70gBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth SRAM Direct Mount Boost MTB Chain RingThe ideal chainring upgrade for the most aggressive mountain bike riders, Wolftooth has constructed this tough and efficient drivetrain component from 7075-T6 aluminium. Precisely machined with a patented narrow-wide tooth design, this boost-bike specific model is perfect for use with 1x12-speed gears and offers you excellent chain retention over the roughest trails.Wolftooth Drop-Stop technologyWolf Tooth has also equipped this version with its game-changing Drop-Stop technology, which keeps your chain securely in place and dislodges mud, dirt and excess water more efficiently. Features: Material: 7075-T6 Aluminium Mount: Direct mount Chainline: 52mm Offset: 3mm Made in the USA Designed for use with bikes with 148mm rear hub spacing Tooth Profile: Narrow-Wide, Woolftooth drop Stop A (optimised for mountain bikes) Part Numbers: Weight: 28T: 59g; 30T: 65g; 32T: 70gBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth SRAM Direct Mount Elliptical Chain RingThis chainring is precisely machined and uses a patented narrow-wide design that's perfect for 1x setups. Designed to eliminate dropped chains, this model works great with SRAM cranks and its direct mount profile means more time riding and less time fumbling with dropped chains. Wolf Tooth has also equipped this version with its game-changing Drop-Stop technology, which keeps your chain securely in place and dislodges mud, dirt and excess water more efficiently. Powertrac EllipticalMore power? Check. Better traction? Definitely. Less shifting? Yup. Funky uneven pedal stroke? Not with Wolf Tooth's PowerTrac Elliptical (PTE) chainrings. Wolf Tooth's proprietary design means a slightly less ovalized ring (10%) with less aggressive timing (112°) than competitors' versions; any change to your pedal stroke is unnoticeable for most riders, but they still provide the POWER and TRACTION benefits inherent to oval chainrings. It's like having two chainrings in one! With PowerTrac Elliptical rings, the larger-diameter section of the ring engages with the chain at the optimal point on the downstroke, or “Power Zone,” - between 1-5 and 7-11 on a clock face - to take advantage of your body's natural biomechanical POWER: For example, during this section, a PTE 34t ring is equivalent to a 36t round ring. Similarly in the “Recovery Zone” (11-1 and 5-7), the smaller section on the PTE ring engages, maximizing EFFICIENCY in the weakest part of the pedal stroke; here the PTE 34t ring is equivalent to a 32t round ring.Additionally, the above provides a smoother, more efficient pedal rotation, which means better TRACTION. Steadier torque on the rear wheel means less spinning out in the “Power Zone,” while pedaling is easier during the “Recovery Zone,” so you maintain momentum.Compatibility:9, 10, 11, & 12 speed Eagle - These chainrings are designed to work with all 9 speed, 10 speed, and 11 speed chains. They also work with 12 speed Eagle and 12 speed KMC chain. They do not work with Shimano 12 speed Hyperglide+ chain or SRAM 12 speed Flattop chain.If using a 9 speed drivetrain use a 10 speed chain. It fits tighter for better chain retention.Features: Material: 7075-T6 Aluminium Mount: Direct mount Chainline: 52mm Boost Offset: 3mmMade in the USA Part Numbers: 28T: WTOVALSDM28BST; 30T: WTOVALSDM30BST; 32T: WTOVALSDM32BST Weight: 28T: 60g; 30T: 68g; 32T: 74gBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Wolf Tooth SRAM Direct Mount Elliptical Chain RingThis chainring is precisely machined and uses a patented narrow-wide design that's perfect for 1x setups. Designed to eliminate dropped chains, this model works great with SRAM cranks and its direct mount profile means more time riding and less time fumbling with dropped chains. Wolf Tooth has also equipped this version with its game-changing Drop-Stop technology, which keeps your chain securely in place and dislodges mud, dirt and excess water more efficiently. Powertrac EllipticalMore power? Check. Better traction? Definitely. Less shifting? Yup. Funky uneven pedal stroke? Not with Wolf Tooth's PowerTrac Elliptical (PTE) chainrings. Wolf Tooth's proprietary design means a slightly less ovalized ring (10%) with less aggressive timing (112°) than competitors' versions; any change to your pedal stroke is unnoticeable for most riders, but they still provide the POWER and TRACTION benefits inherent to oval chainrings. It's like having two chainrings in one! With PowerTrac Elliptical rings, the larger-diameter section of the ring engages with the chain at the optimal point on the downstroke, or “Power Zone,” - between 1-5 and 7-11 on a clock face - to take advantage of your body's natural biomechanical POWER: For example, during this section, a PTE 34t ring is equivalent to a 36t round ring. Similarly in the “Recovery Zone” (11-1 and 5-7), the smaller section on the PTE ring engages, maximizing EFFICIENCY in the weakest part of the pedal stroke; here the PTE 34t ring is equivalent to a 32t round ring.Additionally, the above provides a smoother, more efficient pedal rotation, which means better TRACTION. Steadier torque on the rear wheel means less spinning out in the “Power Zone,” while pedaling is easier during the “Recovery Zone,” so you maintain momentum.Compatibility:9, 10, 11, & 12 speed Eagle - These chainrings are designed to work with all 9 speed, 10 speed, and 11 speed chains. They also work with 12 speed Eagle and 12 speed KMC chain. They do not work with Shimano 12 speed Hyperglide+ chain or SRAM 12 speed Flattop chain.If using a 9 speed drivetrain use a 10 speed chain. It fits tighter for better chain retention.Features: Material: 7075-T6 Aluminium Mount: Direct mount Chainline: 52mm Boost Offset: 3mmMade in the USA Part Numbers: 28T: WTOVALSDM28BST; 30T: WTOVALSDM30BST; 32T: WTOVALSDM32BST Weight: 28T: 60g; 30T: 68g; 32T: 74gBuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Key Features:9, 10, 11, & 12spd eagle - these chainrings are designed to work with all 9 speed, 10 speed, and 11 speed chains. They also work with 12 speed eagle and 12 speed kmc chain. They do not work with shimano 12 speed hyperglide+ chain or sram 12 speed flattop chain.,If using a 9-speed drivetrain use a 10-speed chain. It fits tighter for better chain retention.
Key Features:Ripstop nylon and durable cordura fabrics,Dimensions: 68 by 46 cm (main body), 60 by 20 cm top flap (for car door), 32 by 60 cm bottom flap (workspace), rolled up diameter size varies,Anodized aluminium eyelets for hanging,Weight - 600g,Tools not included.
Wolf Tooth’s 8-Bit Pack Pliers can solve almost any minor roadside repair whether road cycling, gravel riding, or mountain biking. 17 functions from master link pliers to Torx bits bring superb functionality in a lightweight design, made in the USA from aircraft-grade aluminium.Eight attachments nestle in the pliers and are held in place with magnets. The attachments can be attached to a ball dent swivel head that doubles as an 8mm hex bit. When the swivel head is angled, torque can be added to break loose a stubborn bolt or pedal. Unbent the swivel head acts like a screwdriver for quick unwinding.The master link pliers borrow their design from Wolf Tooth’s pack pliers. They can be used to install and remove a master link, as well as tighten and loosen a valve stem lock nut. There is storage space inside the 8-Bit Pack Pliers for a spare master link.A rasp is stored in one side of the pliers, which can be used to dislodge any stuck sealant in tubeless valves.Key Features: 17 function multitool, Magnet keeps parts in place, Ball dent swivel head to add torque, Machined from 7075-T6 aluminium, Made in the USA, Functions, Master link and valve stem lock nut pliers, Master link storage, Valve cleaner, Spoke wrench, Valve core wrench, T10 and T25 Torx bits, Flat head 3.5 and Phillips 2 screwdriver, Hex 2, 2.5, 3, 4, 5, 6, and 8mm bits.
The Wolf Tooth Performance External Cup Headset is machined in the USA from aircraft-grade 6061 aluminium, to ensure a lightweight, strong, and durable design.The headset uses Enduro chromium steel bearings with a black oxide treatment for superb durability and high load capacities.The headset has three levels of superior custom sealing to protect bearings from the elements and prolong the life of the headset.The Performance headset comes with a 1-year warranty. Key Features: Compatible with any frame that uses an external cup headset with a 34mm upper head tube inner diameter and 34mm, 44mm, or 49mm lower head tube inner diameter.,Stack height designation for EC headsets includes 10mm cup (see tech specs).,Uppers and lowers sold separately.,Enduro black oxide sealed bearings included on both the upper and lower.,Upper headsets ship with a star nut which can only be used on forks with steel or aluminium steerer tubes. For forks with carbon steerer tubes you will need a compression plug (sold separately). (Never use a star nut on a carbon steerer tube).,1-year warranty,Weight: 55-58g,Material 6061 aluminium, Made in the USA,. Upper Assembly Features: Ultralight Stem Cap with Integrated Spacer plus an aluminium bolt and a star nut.,5mm top cover = 16mm total stack.,O-ring seal prevents water intrusion around the steerer tube.,Custom-moulded upper lip seal provides additional protection for upper bearing. .
The Wolf Tooth Performance Zero Stack Headset is machined in the USA from aircraft-grade 6061 aluminium, to ensure a lightweight, strong, and durable design.The headset uses Enduro chromium steel bearings with a black oxide treatment for superb durability and high load capacities.The headset has three levels of superior custom sealing to protect bearings from the elements and prolong the life of the headset.The Performance headset comes with a 1-year warranty. Key Features: Any frame that uses ZS (Zero Stack) headsets with 44mm upper and 56mm lower head tube inner diameter., Uppers and lowers sold separately., Enduro black oxide steel sealed bearings included on both the upper and lower., Upper headsets ship with a star nut which can only be used on forks with steel or aluminium steerer tubes. For forks with carbon steerer tubes you will need a compression plug (sold separately). (Never use a star nut on a carbon steerer tube) ,1-year warranty., Weight: 55-58g, Material: 6061 aluminium, Made in the USA,. Upper Assembly Features: Ultralight Stem Cap with Integrated Spacer plus an aluminium bolt and a star nut., 6mm top cover = 6mm total stack., O-ring seal prevents water intrusion around steerer tube.,Custom-moulded upper lip seal provides additional protection for upper bearing..
The Wolf Tooth Elliptical Direct Mount Chainring for Race Face Cinch is not only beautifully machined and lightweight but utilises a patented wide-narrow design that is perfectly suited to 1x setups – dropped chains are a thing of the past. Unlock your dream drivetrain configuration and satisfy your inner tweaker.Bred from ice-cold Minneapolis winters and explicitly designed to work perfectly with Race Face Cinch cranks, this direct mount chainring means more time riding and less time fumbling with dropped chains.In line with Wolf Tooth’s guiding ethos of providing unrivalled design innovation, reliability and durability, this chainring employs a patented Drop-Stop® wide-narrow tooth profile which not only keeps the chain securely in place on single chainring setups but dislodges mud, dirt and excess precipitation more efficiently. For additional security in extreme conditions, this chainring is best used with a clutch-type rear derailleur.Synonymous with ultra-high-end custom builds and stalwart steeds alike, Wolf Tooth chainrings are machined entirely in-house at Wolf Tooth’s HQ in Minnesota, USA. The anodised finish and machined lettering that adorn every chainring bear the hallmark of master craftsmanship.PowerTracWolf Tooth’s PowerTrac Elliptical (PTE) design, as the name indicates, is driven by a concern for power and traction – and crucially for you, premised on a wealth of knowledge from precision engineers who also love to ride bikes.A growing number of riders are converting to elliptical chainrings on 1x setups for the simple reason that they have been demonstrated to improve ride quality.The idea behind elliptical chainrings can be summarised as follows: biomechanical power output varies throughout a pedal stroke, at positions where power is higher, having a larger diameter section of chainring, and thus greater engagement area, translates into greater forward propulsion. At positions where biomechanical power is lower, a smaller chainring diameter means greater efficiency in rotation. Overall what this means for you is maximised power output throughout each pedal stroke.Wolf Tooth note that elliptical rings also mean steadier torque on the rear wheel as there is less spinning on the downstroke and easier rotation in between these. Steadier torque on the rear wheel gives better traction and sustained momentum – great on tough climbs and through headwinds.If you’re a discerning cyclist looking to invest in a premium-grade chainring that’ll outlast its competitors and function perfectly on a 1x set up, this is the only way to go.Compatibility:Any Race Face Cinch(TM) system crankset (including Next SL, Sixc, Turbine, Aeffect),Both standard (142mm rear hub spacing) and Boost (148mm hub spacing) offsets available. ,Wolf Tooth’s patented Drop-Stop® wide/narrow tooth profile for the ultimate chain retention and mud shedding ability.,For 1x9, 1x10, 1x11 and 1x12 drivetrains (including SRAM Eagle),Compatible with all 10, 11, and 12-speed chains except Shimano 12-speed chains.,If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention).,Maximum diameter is that of a chainring 2t bigger than the size you order (so be sure there is adequate chainstay clearance!),Chainline 49mm (standard), 52mm (Boost).
Wolf Tooth Magura Light Action Remote Dropper LeverThis Light Action dropper seatpost lever is engineered to solve common dropper remote problems with its ergonomic, compact and sturdy design. This Light Action version aims to solve common dropper remote complaints with its compact, ergonomic and sturdy design. The ReMote Light Action Dropper Lever has a longer lever arm than the standard ReMote, reducing the actuation force required by a third and making it ideal for dropper posts with a harder pull or if you prefer a light actuation feel. This dropper seatpost lever is another option in Wolf Tooth's industry-leading ReMote line of dropper remotes. Every single detail of the ReMote Light Action is the result of a singular drive to eliminate all complaints found with stock dropper levers.Sealed Cartridge BearingIn an industry first, the ReMote uses a 21mm sealed cartridge bearing for smooth operation and unparalleled modulation. A precision-machined cable path and custom clamping screw with a captive washer won't damage cables like more common set screws. As an added bonus, cables can be cut to length and crimped prior to securing.The ReMote lever sits close to the bar, minimising the distance the thumb must be removed from the grip while reducing the likelihood of knee contact in technical terrain and adds a bit of extra length to overcome stiff dropper internals.Lightweight with Hassle-free InstallationWolf Tooth's team has also included an innovative engineered failure point, allowing the lever to break away from its base in the event of a crash. Replacement axles are inexpensive and readily available, ensuring that you can spend more time on the trails and less time in the workshop.Beginning with a long list of rider and mechanic requests, the Wolf Tooth team set out to address each and every one. Based on rider feedback and tailored to work with some posts' stiffer internal springs, the ReMote LA is also the choice for those with thumb injuries or reduced hand strength. From its hassle-free installation to smooth ball bearing action to the engineered failure point, the lightweight ReMote leads in every category.Features: Body Material: 6061 T6 Aluminium Axle Material: Delrin Use: Mountain Bike (MTB) Clamp Type: Magura Clamp Included: Yes Ergonomic Easy to Install Sealed cartridge bearings Textured lever Made in USATechnologies: UpFront cable fixing: The dropper cable is attached at the lever, making setup and adjustment quick and easy. Simply secure cable at seatpost using stock barrel or cable clamp and route to bar for a significant reduction in installation time and frustration. Large-diameter ball-bearing pivot: An industry first, the ReMote uses a massive 21mm sealed cartridge bearing for smooth operation and unparalleled modulation. Cable-kind clamp: A precision-machined cable path and custom clamping screw with captive washer won't damage cables like more common set screws. As an added bonus, cables can be cut to length and crimped prior to securing. Low-profile lever: The ReMote lever sits close to the bar, minimizing the distance the thumb must be removed from the grip while reducing the likelihood of knee contact in technical terrain and adds a bit of extra length to overcome stiff dropper internals. Integrated cable adjustment: The ReMote solidly-mounted barrel adjuster makes on-the-fly adjustments quick and easy while eliminating the rattles caused by common inline cable adjusters. Breakaway axle pivot: Crashes are bad, but expensive crashes are worse. That's why the ReMote features an engineered failure point, allowing the lever to break away from its base in the event of a crash. Replacement axles are inexpensive and readily available from Wolf Tooth. High-traction lever: A machined surface ensures that control is not lost, even in the worst of conditions. Broad compatibility: The ReMote has been tested and is recommended for use with many cable-actuated dropper posts. See the compatibility section below for details. Made in the USA: Wherever the capabilities exist, Wolf Tooth is committed to domestic manufacturing. From lever to packaging, 65% or more of each ReMote is made in the USA.Manufacturer's Part Number: WTREMOTELAMAGURABuy Wolf Tooth Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Designed for the demands of today's mountain bike (MTB) trail riding disciplines, this dropper post lever is fully-equipped for wherever your next adventure takes you. It is specifically designed for Shimano I-SPEC II and includes the IS-II hardware for quick and easy installation. Solve common dropper remote complaints with the compact, ergonomic and sturdy ReMote dropper lever. Beginning with a long list of rider and mechanic requests, the Wolf Tooth team set out to address each and every one. From its hassle-free installation, to smooth ball bearing action, to the engineered failure point, the lightweight ReMote leads in every category. ReMote IS-II for Shimano I-SPEC II - Includes IS-II hardware. UpFront cable fixing: The dropper cable is attached at the lever, making setup and adjustment quick and easy. Simply secure cable at seatpost using stock barrel or cable clamp and route to bar for a significant reduction in installation time and frustration. Large-diameter ball-bearing pivot: An industry first, the ReMote uses a massive 21mm sealed cartridge bearing for smooth operation and unparalleled modulation. Cable-kind clamp: A precision-machined cable path and custom clamping screw with captive washer won’t damage cables like more common set screws. As an added bonus, cables can be cut to length and crimped prior to securing. Low-profile lever: The ReMote lever sits close to the bar, minimizing the distance the thumb must be removed from the grip while reducing the likelihood of knee contact in technical terrain and adds a bit of extra length to overcome stiff dropper internals. Integrated cable adjustment: The ReMote solidly-mounted barrel adjuster makes on-the-fly adjustments quick and easy while eliminating the rattles caused by common inline cable adjusters. Breakaway axle pivot: Crashes are bad, but expensive crashes are worse. That’s why the ReMote features an engineered failure point, allowing the lever to break away from its base in the event of a crash. Replacement axles are inexpensive and readily available from Wolf Tooth. High-traction lever: A machined surface ensures that control is not lost, even in the worst of conditions. Broad compatibility: The ReMote has been tested and is recommended for use with many cable-actuated dropper posts. See the compatibility section below for details. Made in the USA: Wherever the capabilities exist, Wolf Tooth is committed to domestic manufacturing. From lever to packaging, 65% or more of each ReMote is made in the USA. Manufacturer's Part Number: WTREMOTEISII
This dropper post lever is specifically designed for use with Magura brakes. It features a hard-wearing 6061 T6 aluminium construction, which makes it tough and dependable as you charge from trail to trail. Ergonomic and easy to install, this dropper lever makes it easy to change your seatpost positioning without having to stop your ride. Its sealed cartridge bearings and textured lever also make it a perfect choice for smooth and consistent operation in all weather and terrain conditions. Solve common dropper remote complaints with the compact, ergonomic and sturdy ReMote dropper lever. Beginning with a long list of rider and mechanic requests, the Wolf Tooth team set out to address each and every one. From its hassle-free installation, to smooth ball bearing action, to the engineered failure point, the lightweight ReMote leads in every category. Technologies: UpFront cable fixing: The dropper cable is attached at the lever, making setup and adjustment quick and easy. Simply secure cable at seatpost using stock barrel or cable clamp and route to bar for a significant reduction in installation time and frustration. Large-diameter ball-bearing pivot: An industry first, the ReMote uses a massive 21mm sealed cartridge bearing for smooth operation and unparalleled modulation. Cable-kind clamp: A precision-machined cable path and custom clamping screw with captive washer won’t damage cables like more common set screws. As an added bonus, cables can be cut to length and crimped prior to securing. Low-profile lever: The ReMote lever sits close to the bar, minimizing the distance the thumb must be removed from the grip while reducing the likelihood of knee contact in technical terrain and adds a bit of extra length to overcome stiff dropper internals. Integrated cable adjustment: The ReMote solidly-mounted barrel adjuster makes on-the-fly adjustments quick and easy while eliminating the rattles caused by common inline cable adjusters. Breakaway axle pivot: Crashes are bad, but expensive crashes are worse. That’s why the ReMote features an engineered failure point, allowing the lever to break away from its base in the event of a crash. Replacement axles are inexpensive and readily available from Wolf Tooth. High-traction lever: A machined surface ensures that control is not lost, even in the worst of conditions. Broad compatibility: The ReMote has been tested and is recommended for use with many cable-actuated dropper posts. See the compatibility section below for details. Made in the USA: Wherever the capabilities exist, Wolf Tooth is committed to domestic manufacturing. From lever to packaging, 65% or more of each ReMote is made in the USA. Manufacturer's Part Number: WTREMOTEMAGURA