Level TLM puts proven SRAM braking performance and consistency at your fingertips, in a sleek, lightweight design optimized specifically for cross-country and light trail use. Power and modulation are delivered via the Level TLM’s alloy lever blade, DirectLink actuation, DOT 5.1 fluid and SRAM's Level two-piston, monoblock caliper. The design provides superior heat management for consistent, fade-free performance all day long, and Bleeding Edge technology makes maintenance incredibly simple, so your brakes feel great all day - every day. Lightweight and Durable Caliper Design Incorporates technologies developed on Guide Ultimate’s S4 caliper Moly-coated aluminium pistons for consistent rollback and easy set-up New seals, gland geometry and piston coating for improved rollback, results in easier setup and improved consistency Heat Management: piston insulators and Heat Shield reduce operating temperature and minimize heat transfer to the caliper body Bleeding Edge: new bleeding adapter and porting for quick, mess-free bleeding Two 21mm pistons Monoblock construction. Bleeding Edge Braking Efficiency New bleed porting and fluid path make it easier to push fluid through the caliper for quick and easy bleeding. A dedicated bleed adapter for the Level Ultimate/TLM and S4 calipers (Guide Ultimate) plugs into the bleed port and seals the system to minimize air contamination and fluid loss. Timing Port Closure A hydraulic brake’s timing port is the connection between the reservoir and the master cylinder bore. When the lever is squeezed, a cup seal passes this area and closes the port, which pressurizes the system. SRAM’s new timing port closure system features durable seals and an ultra-smooth cylinder bore finish producing dependable braking power and consistency. Contact Point Adjust Some people like the instantaneous power of a short lever throw. Others prefer the feel of a longer throw. With Contact Point Adjust, you can pick the position you want your fingers to be in when your brakes are engaged. It’s a quick and easy way to customize the feel of your brakes without having to move the pads. It’s also a way to balance both brake levers to feel exactly the same. Piggyback Reservoir The brake fluid reservoir on SRAM’s latest lever design is optimized for both performance and ease of use. The PiggyBack Reservoir offers a simple, failsafe way to manage brake fluid, and also allows for ambidextrous lever placement—so you can switch your levers on the handlebar and run them moto without hassle. Direct Link SRAM’s DirectLink lever design produces a solid, positive feel the second you squeeze the lever to engage the brake It offers a no-nonsense solution to give you precise control. Reach Adjust Brake Lever fit and feel is a personal thing. Riders have individual positioning preferences, as well as unique hand sizes and finger lengths. Reach Adjust makes it easy to adjust your lever for maximum one-finger control for everyone. Dead Band This refers to the time between the moment you engage the lever and when the pads contact the rotor. SRAM technologies such as SwingLink balance the dual demands of minimizing deadband and optimizing modulation for braking finesse and control. Expandable Bladder SRAM’s Level brake lever design includes a reshaped bladder, that helps regulate and reduce air bubbles. The bladder is specifically shaped to evacuate air from the lever and push the fluid exactly where it’s needed. The result is improved back-pressure relief, which produces dependable braking power and consistency.
Featuring a SRAM logo inspired rubber grip pattern with a medium softness, these mountain bike (MTB) grips ooze style and offer bags of grip in all conditions. You can rely on these sturdy SRAM Locking Grips to give you the control over your ride that you need.
This high-quality 12 speed cassette is ideal for gravel riding as it comes fully equipped with some of the finest technologies available from SRAM for maximum performance on your travels. Ready for exploring countryside backroads with mixed terrain conditions, this model is kitted out with a wide 440% range, which makes gravel mountain climbs less daunting while its tight jumps between its higher cogs allow you to get the power down when accelerating on the asphalt. Specifically designed for use with SRAM XPLR 1x rear derailleurs, each cog has shift features that are optimised for electronic shifting. This means that riders will enjoy electronic benefits such as faster, smoother and more accurate shifts, so you're always in the right gear. X-Range Optimised 12 Speed Cassette Due to today's drop bar bikes being faster and more capable than ever before, riders want a shifting set-up with wide-range gearing to match their wide range of cycling pursuits. But, as the range is only half of the equation, they also want a drivetrain that offers the right gear for any situation. By starting X-Range cassettes with a 10T cog, SRAM is able to keep the cogs and chainrings smaller overall, eliminating the potential weight gain of a wide-range 11-tooth start drivetrain. It's the best way to expand the range and keep small jumps between cogs. X-Range achieves wider range and tighter jumps by going to a 12-speed cassette, but also by moving some of the gear range from the front of the drivetrain to the back. That means you can stay on the same ring longer, requiring fewer front shifts, which are inherently less efficient than rear shifts. And when a front shift is executed, the smaller jump is smoother and allows you to get to the right cadence with fewer compensation shifts in the rear. Fewer, faster front shifts make it easier for you to find the right gear, and that’s a distinct performance advantage relative to traditional drivetrains. 440% Range for Gravel Riding Make that daily ride from your front door a little spicier with some dirt. The 440% range of the XPLR XG-1271 cassette provides smooth gear progression when you’re sweating up gravel climbs, and tight jumps on the high end for when it’s time to drill it on asphalt. Shift features on each cog are optimised for electronic shifting, so you’ll get fast, smooth and precise shifts every time. - X-Range gearing gives you more range and a smoother gear progression, so you’re always in the right gear - 440% range gives the coverage 1x gravel riders want - For use with XPLR 1x rear derailleurs - Compatible with Flattop chains - Compatible with XDR driver body - All Zipp wheels starting from 2015 are XDR ready - Mini Cluster technology with aluminium large cog for light weight and durability Manufacturer's Part Number: 00.2418.118.000
Providing the precision and reliability of 12 speed eTap AXS at a whole new level, this rear derailleur is designed to tackle every road surface you can imagine. It features a tough aluminium cage construction, which makes it suitable at handling the demands associated with clocking up the miles on your road bike. Coming equipped with high-quality steel pulley bearings and larger X-Sync pulleys, SRAM has engineered this model for increased durability and efficiency wherever your ride takes you. Another highlight is its secure chain management set-up, which delivers fast and precise shifting as well as a smoother and quieter ride. AXS Enabled Road Bike Rear Derailleur If your ride doesn’t feel complete until you get a little dirt on your tyres, you know the importance of capable components that can tackle anything. The Rival XPLR eTap AXS rear derailleur is a dedicated 1x-specific unit designed for use with the XPLR 10-44 cassette. It makes for an uncluttered drivetrain that takes on pavement and singletrack with equal assurance. Wireless and proven eTap shift logic, AXS connectivity and advanced chain management mean this derailleur does exactly what you want when you need it. - Wireless electronic eTap shift logic for intuitive shifting, easy setup and reliability - 1x specific for use with 10-44 XPLR and 10-36 cassettes - SRAM AXS enabled, allowing easy personalisation - Chain management keeps the drivetrain quiet and secure - Larger X-SYNC pulleys for increased durability and efficiency - Compatible with existing eTap batteries Technologies: AXS Enabled: AXS is SRAM’s bike component integration system that connects electronic bicycle components and software. Control: AXS lets you connect your AXS-enabled components to a mobile app, where you can assign custom actions to your controls. Everything speaks the same language, and you can even combine road and mountain bike parts to build the party bike of your dreams. Personalise: Wireless controls open the door to new levels of customisation. With AXS, you can personalise your component behavior to match your riding style and preferences. Turn on enhanced shifting modes, or reassign shifting actions. Measure: The AXP Mobile App and AXS Web allow you to monitor your bike’s performance and readiness. It’s an easy way to keep tabs on your battery levels—including the CR2032 batteries in eTap shift levers—and keep AXS component firmware up-to-date. AXS Web analyses your ride files specific to shifting, gear use, power zones, and tyre pressure, so that you can quickly and easily learn more about how your bike is working for you and consider adjustments. X-Sync: SRAM X-SYNC chainrings provide the highest level of performance and durability. The SRAM X-SYNC tall square teeth edges engage the chain earlier than traditional triangle-shaped teeth. The sharp and narrow tooth profile, as well as rounded chamfer edges, help manage a deflected chain. To provide the best possible performance in muddy conditions, the X-SYNC chainrings have been designed with mud-clearing recesses for the inner chain links and rollers. Engineered in Germany, X-SYNC rings are an integral part of the SRAM 1x drivetrain. Accept no imitation. Manufacturer's Part Number: 00.7518.159.000
Ready to conquer the challenges associated with road cycling, this rear derailleur is equipped with a tough aluminium build and wireless technologies for greater precision, customisation and control wherever your road bike takes you. Its durable aluminium construction makes it more than capable of handling the changes to the terrain conditions and the consistent gearing that comes with it on your travels. SRAM has also kitted out this model with high-quality steel pulley bearings and larger X-Sync pulleys, so riders can enjoy increased strength and efficiency. Another benefit is its Orbit chain management technology, which makes shifting easier and quieter as you clock up the miles. Road Bike Rear Derailleur with AXS Wireless Connectivity If your ride doesn’t feel complete until you get a little dirt on your tyres, you know the importance of capable components that can tackle anything. The Force XPLR eTap AXS rear derailleur is a dedicated 1x-specific unit designed for use with the XPLR 10-44 cassette. It makes for an uncluttered drivetrain that takes on pavement and singletrack with equal assurance. Wireless and proven eTap shift logic, AXS connectivity and advanced chain management mean this derailleur does exactly what you want when you need it. - Wireless electronic eTap shift logic for intuitive shifting, easy setup and reliability - Orbit chain management technology keeps the drivetrain quiet and secure - 1x specific for use with 10-44 XPLR and 10-36 cassettes - SRAM AXS enabled, allowing easy personalisation - Larger X-SYNC pulleys for increased durability and efficiency - Compatible with existing eTap batteries Technologies: AXS Enabled: AXS is SRAM’s bike component integration system that connects electronic bicycle components and software. Control: AXS lets you connect your AXS-enabled components to a mobile app, where you can assign custom actions to your controls. Everything speaks the same language, and you can even combine road and mountain bike parts to build the party bike of your dreams. Personalise: Wireless controls open the door to new levels of customisation. With AXS, you can personalise your component behavior to match your riding style and preferences. Turn on enhanced shifting modes, or reassign shifting actions. Measure: The AXP Mobile App and AXS Web allow you to monitor your bike’s performance and readiness. It’s an easy way to keep tabs on your battery levels—including the CR2032 batteries in eTap shift levers—and keep AXS component firmware up-to-date. AXS Web analyses your ride files specific to shifting, gear use, power zones, and tyre pressure, so that you can quickly and easily learn more about how your bike is working for you and consider adjustments. X-Sync: SRAM X-SYNC chainrings provide the highest level of performance and durability. The SRAM X-SYNC tall square teeth edges engage the chain earlier than traditional triangle-shaped teeth. The sharp and narrow tooth profile, as well as rounded chamfer edges, help manage a deflected chain. To provide the best possible performance in muddy conditions, the X-SYNC chainrings have been designed with mud-clearing recesses for the inner chain links and rollers. Engineered in Germany, X-SYNC rings are an integral part of the SRAM 1x drivetrain. Accept no imitation. Orbit: Orbit technology is an innovative form of derailleur motion control. It utilises silicon fluid as part of an elegant and ultra-lightweight damper system. Compared to a standard friction clutch system, Orbit technology places no additional resistance on the rear derailleur’s spring when under slow or light movement. This means easier shifting and rear wheel removal. And while riding, the fluid damper reduces chain bounce. Manufacturer's Part Number: 00.7518.158.000
Specifically designed for the demands of gravel bike riding, this versatile cassette is equipped with a 440% range as well as some of the finest technologies available from SRAM. Whether you're looking to explore countryside backroads or take on an all-day epic ride across mixed terrain conditions, this model's wide range makes gravel mountain climbs less daunting while its tight jumps on its high end make it easy to power up to speed on the asphalt. Developed for use with XPLR 1x rear derailleurs, each cog has shift features that are optimised for electronic shifting. This makes it a great choice of upgrade for getting fast, smooth and accurate shifts, wherever your next gravel bike adventure takes you. X-Range Optimised 12 Speed Cassette Due to today's drop bar bikes being faster and more capable than ever before, riders want a shifting set-up with wide-range gearing to match their wide range of cycling pursuits. But, as the range is only half of the equation, they also want a drivetrain that offers the right gear for any situation. By starting X-Range cassettes with a 10T cog, SRAM is able to keep the cogs and chainrings smaller overall, eliminating the potential weight gain of a wide-range 11-tooth start drivetrain. It's the best way to expand the range and keep small jumps between cogs. X-Range achieves wider range and tighter jumps by going to a 12-speed cassette, but also by moving some of the gear range from the front of the drivetrain to the back. That means you can stay on the same ring longer, requiring fewer front shifts, which are inherently less efficient than rear shifts. And when a front shift is executed, the smaller jump is smoother and allows you to get to the right cadence with fewer compensation shifts in the rear. Fewer, faster front shifts make it easier for you to find the right gear, and that’s a distinct performance advantage relative to traditional drivetrains. 440% Range for Gravel Riding Make that daily ride from your front door a little spicier with some dirt. The 440% range of the XPLR XG-1251 cassette provides smooth gear progression when you’re sweating up gravel climbs, and tight jumps on the high end for when it’s time to drill it on asphalt. Shift features on each cog are optimised for electronic shifting, so you’ll get fast, smooth and precise shifts every time. - X-Range gearing gives you more range and a smoother gear progression, so you’re always in the right gear - 440% range gives the coverage 1x gravel riders want - For use with XPLR 1x rear derailleurs - Compatible with Flattop chains - Compatible with XDR driver body - All Zipp wheels starting from 2015 are XDR ready - Mini Cluster technology for light weight and durability Manufacturer's Part Number: 00.2418.119.000
Providing intuitive shifting, easy setup and reliability on every mile of road, this rear derailleur is engineered for performance. It features a tough aluminium cage, which allows it to handle all of the demands and challenges associated with long days on your road bike. SRAM has also equipped this model with ceramic pulley bearings, so riders can enjoy smooth and dependable shifting operation as they change gear. Coming kitted out with some of the finest technologies available from SRAM such as eTap shift logic, AXS, Orbit chain management and larger X-Sync pulleys, this is a great choice of upgrade for benefitting from a more rider-tuned and customisable feel as you clock up the miles. Road Bike Rear Derailleur with AXS Connectivity If your ride doesn’t feel complete until you get a little dirt on your tyres, you know the importance of capable components that can tackle anything. The RED XPLR eTap AXS rear derailleur is a dedicated 1x-specific unit designed for use with the XPLR 10-44 cassette. It makes for an uncluttered drivetrain that takes on pavement and singletrack with equal assurance. Wireless and proven eTap shift logic, AXS connectivity and advanced chain management mean this derailleur does exactly what you want when you need it. - Wireless electronic eTap shift logic for intuitive shifting, easy setup and reliability - Orbit chain management technology keeps the drivetrain quiet and secure - 1x specific for use with 10-44 XPLR and 10-36 cassettes - SRAM AXS enabled, allowing easy personalisation - Larger X-SYNC pulleys for increased durability and efficiency - Compatible with existing eTap batteries Technologies: AXS Enabled: AXS is SRAM’s bike component integration system that connects electronic bicycle components and software. Control: AXS lets you connect your AXS-enabled components to a mobile app, where you can assign custom actions to your controls. Everything speaks the same language, and you can even combine road and mountain bike parts to build the party bike of your dreams. Personalise: Wireless controls open the door to new levels of customisation. With AXS, you can personalise your component behavior to match your riding style and preferences. Turn on enhanced shifting modes, or reassign shifting actions. Measure: The AXP Mobile App and AXS Web allow you to monitor your bike’s performance and readiness. It’s an easy way to keep tabs on your battery levels—including the CR2032 batteries in eTap shift levers—and keep AXS component firmware up-to-date. AXS Web analyses your ride files specific to shifting, gear use, power zones, and tyre pressure, so that you can quickly and easily learn more about how your bike is working for you and consider adjustments. X-Sync: SRAM X-SYNC chainrings provide the highest level of performance and durability. The SRAM X-SYNC tall square teeth edges engage the chain earlier than traditional triangle-shaped teeth. The sharp and narrow tooth profile, as well as rounded chamfer edges, help manage a deflected chain. To provide the best possible performance in muddy conditions, the X-SYNC chainrings have been designed with mud-clearing recesses for the inner chain links and rollers. Engineered in Germany, X-SYNC rings are an integral part of the SRAM 1x drivetrain. Accept no imitation. Orbit: Orbit technology is an innovative form of derailleur motion control. It utilises silicon fluid as part of an elegant and ultra-lightweight damper system. Compared to a standard friction clutch system, Orbit technology places no additional resistance on the rear derailleur’s spring when under slow or light movement. This means easier shifting and rear wheel removal. And while riding, the fluid damper reduces chain bounce. Manufacturer's Part Number: 00.7518.157.000
Whether you're riding with your local road club or exploring new routes on your own, these high-quality carbon crank arms are engineered for performance. They feature a hollow Exogram carbon construction, which gives them a fantastic balance of strength, elegance and an overall low weight. Coming equipped with industry-leading technology such as SRAM's DUB bottom bracket spindle interface, these ensure stiffer pedalling performance with better sealing than ever before without having to make compromises to fit all frames. Designed for the most discerning pros. And riders who set it and neglect it. DUB is compatible with all major bottom bracket standards. These crank arms can also be paired with any SRAM AXS spider or integrated chainring, with or without power. Please note: Bottom brackets are available separately. Exogram Carbon Crank Arms SRAM's Hollow Carbon Construction starts in the crank arms, maximising the stiffness to weight ratio. DUB Technology The relationship between bottom bracket spindle and bearing is the core of DUB technology. It’s where stiffness meets durability. SRAM took it a step beyond conventional thinking and made everything simpler—better integrating the relationship between chainring, crank, spindle and bottom bracket. It’s this approach to developing a complete system that equals better drivetrain performance. Technologies: - 8-bolt interface compatible with power and non-power AXS spiders and integrated chainrings. - DUB technology. - Hollow Exogram carbon arms. Manufacturer's Part Numbers: CAA8265004 Black 175mm CAA8265002 Black 170mm
These pads provide highly effective braking in both the dry and the wet and are designed to work with a wide range of SRAM’s road and CX caliper brakes.
This race-ready 12 speed chainset features a carbon crankarm build, which means that riders will enjoy increased stiffness when climbing and an overall lower weight when accelerating on the flat. Its impressive strength to weight ratio is further enhanced thanks to its single X-SYNC aluminium chainring that provides exceptional durability and longevity as you tackle whatever the course throws at you. Coming equipped with X-SYNC technology, this model's chainring uses its wide/narrow tooth profile to deliver maximum chain control for an extra confidence boost on race day. One final highlight is its kitted out with a DUB compatible spindle interface for a simpler, stiffer, and more secure connection between your chainring, cranks and bottom bracket. SRAM originated the 1x drivetrain, and the SRAM Force 1 crankset evolves the innovation. It's lighter, stronger and simpler—non-aero chainrings can now be installed with a single tool. For cross, time trial (TT), triathalon and crits, this is the king of 1x. - Single-ring drivetrain simplifies functionality and reduces weight - 48t variant has direct mount aero chainrings for better aerodynamics - Non-aero chainrings can be installed with a single tool, making gearing changes a breeze - SRAM X-SYNC™ wide-tooth, narrow-tooth chainring technology provides maximum chain control - DUB™ bottom bracket adds durability and simplicity - Can be upgraded to a power meter Technologies: X-SYNC: SRAM X-SYNC 1x chainrings provide the highest level of performance and durability. The SRAM X-SYNC tall square teeth edges engage the chain earlier than traditional triangle-shaped teeth. The sharp and narrow tooth profile, as well as rounded chamfer edges, help manage a deflected chain. To provide the best possible performance in muddy conditions, the X-SYNC chainrings have been designed with mud-clearing recesses for the inner chain links and rollers. Engineered in Germany, X-SYNC rings are an integral part of the SRAM 1x drivetrain. Accept no imitation. DUB: The relationship between bottom bracket spindle and bearing is the core of DUB technology. It’s where stiffness meets durability. SRAM took it a step beyond conventional thinking and made everything simpler—better integrating the relationship between chainring, crank, spindle and bottom bracket. It’s this approach to developing a complete system that equals better drivetrain performance. Bottom bracket sold separately. Manufacturer's Part Numbers: 00.6118.620.002 Black 46T 170mm 00.6118.620.003 Black 46T 172.5mm 00.6118.620.004 Black 46T 175mm 00.6118.620.008 Black 40T 170mm 00.6118.620.009 Black 40T 172.5mm 00.6118.620.010 Black 40T 175mm
It's CenterLine X Ti Rounded Rotor provides the same great braking qualities at a lower weight, having an alloy centre with a steel braking track. This rotor features rounded edges, which are fully UCI-compliant and come with the added benefit of making it easier to install your wheels.
Adopting some of the same technologies that are seen on SRAM's high-end models, the SRAM X4 rear derailleur offers smooth and unrestricted shifting and excellent durability. Technologies: Direct Route: Direct Route Technology doesn't have a middle man. Instead, the cable routes directly to the actuation mechanism. Result? Less friction. Less effort. More oomph. Plus, it's impervious to cable housing damage. Nice.
By eliminating unwanted chain movement, X-Horizon shifts faster, puts an end to ghost shifting and reduces shift force and chain slap. And with Cage Lock technology, wheel removal and installation are easier than ever. Cage Lock With Cage Lock technology in the rear derailleur, wheel removal and installation, as well as chain installation, becomes faster and simpler. Just pushing the cage forward to create slack and lock it into place. Roller Bearing Clutch Features Roller Bearing Clutch (RBC) rear derailleurs deliver maximum drivetrain stability—even through the most punishing terrain. With RBC technology, derailleur bounce and chain slap are eliminated without sacrificing precision. X-Actuation Developed specifically for SRAM 1X, X-Actuation keeps shifting sharp and consistent across the entire 10 to 42-tooth cassette. X-Horizon The X-Horizon rear derailleur’s ‘straight parallelogram’ design limits all movement to the horizontal axis, which makes ghost shifting impossible while also reducing shift force. For quicker, more exact shifting, the large upper pulley offset design maintains a constant chain gap across all gears. X-Sync SRAM X-Sync 1X chain rings provide the highest level of performance and durability. The SRAM X-Sync tall square teeth edges engage the chain earlier than traditional triangle shaped teeth. The sharp and narrow tooth profile, as well as rounded chamfer edges, help manage a deflected chain. To provide the best possible performance in muddy conditions, the X-Sync chain rings have been designed with mud-clearing recesses for the inner chain links and rollers. Engineered in Germany, X-Sync rings are an integral part of the SRAM 1X drivetrain.
Designed to be compatible with a range of cassette sizes and either 7 or 8-Speed drivetrains, the SRAM X3 rear derailleur is a super-versatile option that's ideal for beginners to mountain biking, commuters and anything in-between. Technologies: Direct Route: Direct Route Technology doesn't have a middle-man. Instead, the cable routes directly to the actuation mechanism. Result? Less friction. Less effort. More oomph. Plus it's impervious to cable housing damage. Nice.
In addition to the durable and smooth performance, the SRAM PC 1031 10 speed chain adopts SRAM's PowerLock connector. This offers quick and simple joining of the chain and a permanent connection to ensure equal strength and rigidity throughout the chain. Benefitting from an updated and improved design, SRAM's PC1031 chain offers superior strength, durability and slick-shifting. Note: Please be aware, due to the especially tight tolerances of 10 speed chains, the PowerLock connector is good for a one-time application only. Technologies: - SRAM Road 10-speed compatible. - Simply stronger. The PC-1031 chain benefits from design for better performance. - PowerLock connecting link provides smooth, precise shifting and weight savings.
This redesigned Eagle AXS Rocker Paddle is ideal for riders who are new to using AXS quick integration and provides another ergonomic option for those who have run AXS from the start. The controller’s functions are customisable through the AXS app, allowing you to assign any action to any button. With AXS you can truly make your cockpit your own. Technologies: Matchmaker X Integrated: The MatchMaker X clamp is more than just a clamp. Since each clamp accepts up to three controls, you can put everything from your XLoc suspension lockout, your SRAM shifters, SRAM brake levers and AVID brake levers as well as your Reverb XLoc remote, all on two clamps. Short of genetically engineering longer thumbs, it’s the ideal way to put everything within easy reach. AXS: AXS is SRAM’s bike component integration system that connects electronic bicycle components and software. The SRAM AXS app allows riders to see battery status, change component behaviour, personalise controls, get maintenance reminders, and update firmware. Customise in-board and outboard shift options. AXS enabled components are able to be programmed and personalised using the SRAM AXS App. Manufacturer's Part Number: 00.3018.289.000
A fluid that takes almost three times longer than DOT 4 to boil, the SRAM DOT 5.1 drake fluid which combines with the technologies on SRAM and Avid brakes and helps your brakes to perform consistently no matter how hard or how long you’re riding.
These SRAM Doubletap hoods are ideal for replacing the old or worn-out ones on your Doubletap road bike gear shifters. These are compatible with SRAM Apex, Rival, Force and Red brakes (Gen 1). Manufacturer's Part Number: 00.7915.042.000
The SRAM Apex 1 rear derailleur makes that perfect gearing choice a reality with clean, crisp shifts, thanks to SRAM’s X-Horizon™ geometry and the Roller Bearing Clutch™. Just go: Apex 1 will get you there.
SRAM have also paid attention to the finer details, like adding a hollow titanium anchor bolt and even refining tooth geometry of the jockey wheel. The result is that the chain runs through the new RED Rear Derailleur smoother and quieter than ever before.