Key Features:Tough genuine Shimano toolsHardened steel for longevity and durability.
Pair of genuine Shimano replacement pads,Alloy and Steel back plate using Ice-Technologies heat radiation cooling fins with resin braking compound.
Features:A good quality bottom bracket for traditional chainsets,Super-accurate bearings for smooth operation and improved durability,Durable, hard-wearing sealed cartridge bottom bracket with square tapered spindle fitting,Maintenance-free sealed cartridge bearing assembly keeps out dirt, mud, and water for long bearing life,Fast and easy installation without adjustment,Narrow body allows clearance for cable routing under the bottom bracket.
Pair of genuine Shimano replacement pads.Alloy and Steel back plate using Ice-Technologies heat radiation cooling fins with resin braking compound.
Altus wide link 9-speed compatible dual pull multi-fit front double derailleur for recreational off-road useCompact top swing design,Low-friction wide linkage reduces shifting effort and increases rigidity,Dual pull design allows it to be used with top or bottom cable routing,Multi clamp band is compatible with all frame dimensions,Designed for mountain bike fitment with 64-69 degree chainstay to seat tube angle range,For 36 tooth outer chainring size,Compatible with 9-speed drivetrains,Designed for 48.8 mm chain line only.
R55C4 cartridge type brake shoe set,Genuine Shimano replacement part .
Shimano Deore RT64 CentreLock Disc Brake RotorSimple to install, the Shimano Deore RT64 CentreLock Disc Brake Rotor helps your brakes to perform at their best. Made from stainless steel, it works consistently in tough conditions and during sustained periods of braking.Features: Mount Type: Centrelock Compatibility: Shimano mountain bike (MTB) disc brake range Precision cut stainless steel braking surface improves pad clearing in muddy conditions Rotor contact surface has been developed for excellent pad clearing and cooling Alloy spider supports rotor surface, increasing rigidity and reducing weight Comes complete with steel lockring Resin/Metal brake pad compatible Weight: 153g (160mm) A 2 year warranty is offered with all Shimano products from Chain Reaction Cycles (3 years on Dura-Ace and XTR products).Buy Shimano Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Shimano D02S Metal Brake Pads (Steel)Enjoy the exceptional braking performance with these Disc Brake Pads from Shimano. The D02S Metal Brake Pads are designed to complement your Shimano brake system and offer smooth and controlled braking power. The metal pads boast a high stopping power and superb wear-life - they ensure predictable braking efficiency for long downhill descents while also providing better fade-free performance. Features: Metal pads consistently perform well in dry or wet conditions and have excellent power and durability Rigid compound Longer services life High power in severe conditions Design for muddy and sandy conditions Compatibility: BR-M8120, BR-M7120, BR-M8020, BR-M820, BR-M810, BR-M640, BR-MT520, BR-MT420 Compound: Metal Sold as a pair of pads for one brakeA 2-year warranty is offered with all Shimano products from Chain Reaction Cycles (3 years on Dura-Ace and XTR products).Buy Shimano Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Shimano L05A Resin Disc Brake Pads With FinsThe L05A Resin Disc Brake Pads With Fins from Shimano are a pair of genuine replacement Shimano disc brake pads. These high-performance pads feature steel backing plates with alloy cooling fins with Ice-Technologies and resin braking compound. These pads are recommended for use with Dura Ace, Ultegra and 105 disc brake calipers.Features: Compatible with Dura Ace, Ultegra and 105 Alloy and steel back plate using Ice-Tech heat radiation cooling fins with resin braking compound Manufacturer Part Number: BPL05ARF and BPL05ARF25Compatible Models: BR-R9170, BR-R8070, BR-R7070, BR-RS805, BR-RS505, BR-RS405, BR-RS305, BR-U5000Buy Shimano Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Shimano MT700 E-Thru AxleThis super-lightweight rear E-Thru axle makes installation and maintenance easy with a position-adjustable lever. Rigid and extra-stiff, this axle was designed to offer peak performance when used with Shimano's Deore XT M8000 series. Features: Size: 142x12mm Technology: E-Thru Axle tech Axle Length: 166mm Weight: 75gBuy Shimano Wheels & Tyres from Chain Reaction Cycles, the World's Largest Online Bike Store.
Replacement Di2 wire for Shimano Di2 systems. The removal of traditional mechanical cables in favour of electrical wires not only eliminates poor shifting caused by contaminates, corrosion and stretching, but provides effortless gear shifts.E-tube STEPS EP8 uses a fully removable individual cable system enabling fine tuning with the correct cable length to each component for easy and tidy fitmentEW-SD300 wires use a slim 3.45 mm diameter plug, they can be connected to EW-SD50 wires with the use of EW-AD305 adapterEW-SD300 individual wires are available in varying lengths, there is no need (or facility) to cut these cablesReliable and secure water resistant connectors
Replacement Di2 wire for Shimano Di2 systems. The removal of traditional mechanical cables in favour of electrical wires not only eliminates poor shifting caused by contaminates, corrosion and stretching, but provides effortless gear shifts.E-tube STEPS EP8 uses a fully removable individual cable system enabling fine tuning with the correct cable length to each component for easy and tidy fitmentEW-SD300 wires use a slim 3.45 mm diameter plug, they can be connected to EW-SD50 wires with the use of EW-AD305 adapterEW-SD300 individual wires are available in varying lengths, there is no need (or facility) to cut these cablesReliable and secure water resistant connectors
The Shimano RD-TX800 Tourney TX Rear Derailleur is a fantastic value mountain bike derailleur that s got a light action for easy shifting and over sized pulleys for a wide gear choice that also reduces noise and wear.TX800 mountain bike rear derailleur with light action operation and over-size pulleys for a wide gear choiceOversize 13-tooth tension and guide pulleys to reduce noise and wearTop normal spring for use with Rapidfire shifters8-speed compatibleFor use with 28 to 34 tooth low rear sprockets, total capacity 43 teeth
Pair of genuine Shimano Resin replacement disc brake pads. Steel back plate with resin braking compound.Lining material: Resin (5th generation)Less noise and better modulationNew resin friction material50% better wear resistance than J03A110% better wear resistance than J02AWith radiator finProvides long pad life and less fade by cooling technologyPad shape: Narrow type, JPiston: For 2-piston brake caliperBack plate: AlloyCompatible Model: BR-M9000, BR-M9020, BR-M987, BR-M985, BR-M8100, BR-M8000, BR-M785, BR-M7100, BR-M7000, BR-M675, BR-M666, BR-M6100, BR-M6000, BR-M615, BR-S700, BR-RS785, BR-R785Compatible Series: XTR M9000 Series, XTR M980 Series, DEORE XT M8100 Series, DEORE XT M8000 Series, DEORE XT M780 Series, SLX M7100 Series, SLX M7000 Series, SLX M670 Series, SLX M660 Series, DEORE M6100 Series, DEORE M5100 Series, DEORE M6000 Series, DEORE M610 Series, ALFINE S7000/S700 Series, CYCLOCROSS / ON-ROAD DISC BRAKE
Replacement Di2 wire for Shimano Di2 systems. The removal of traditional mechanical cables in favour of electrical wires not only eliminates poor shifting caused by contaminates, corrosion and stretching, but provides effortless gear shifts.E-tube STEPS EP8 uses a fully removable individual cable system enabling fine tuning with the correct cable length to each component for easy and tidy fitmentEW-SD300 wires use a slim 3.45 mm diameter plug, they can be connected to EW-SD50 wires with the use of EW-AD305 adapterEW-SD300 individual wires are available in varying lengths, there is no need (or facility) to cut these cablesReliable and secure water resistant connectors
Tourney TX50 thumb Shifter plus provides accurate light action easy gear changes for use with 7-speed drivetrainsPair of SIS shift levers (indexed)
3D anatomic design with 3-layer fabric with Windbreak membrane for protection from wind and cold Convenient slip-on design 3D Anatomic pattern and fit for comfort and bike control Windbreak fabric with thin interior lining Non-slip silicon palm print for grip and control Reflective elements for low-light visibility Touchscreen compatible
The removal of traditional mechanical cables in favour of electrical wires not only eliminates poor shifting caused by contaminates, corrosion and stretching, but provides effortless gear shifts E-tube STEPS EP8 uses a fully removable individual cable system enabling fine tuning with the correct cable length to each component for easy and tidy fitment EW-SD300 wires use a slim 3.45 mm diameter plug, they can be connected to EW-SD50 wires with the use of EW-AD305 adapter EW-SD300 individual wires are available in varying lengths, there is no need (or facility) to cut these cables Reliable and secure water resistant connectors
These great value 57mm drop Shimano brake calipers are designed for frames with larger clearances, allowing enough room for full length mudguards and making them perfect for winter and training bikes. The Super SLR dual pivot design allows for superior braking performance with the aluminium lever arms running on coated pivot washers for a smooth, friction free response. Setup is easy thanks to toe in adjustable brake shoes and the resin QR thumb lever allows for fast wheel removal.