SKS SAM Shock PumpSKS S.A.M. (Suspension Air Mechanic) suspension pump is right for any tour, with its mini pump design. The swivelling hose connection is reinforced with a flexible steel mesh, which is as it should be, given the maximum pressure in excess of 360 PSI.The schrader connection is made with a new 2-stage threaded connector, making it possible to screw on and off without any loss of pressure. A pressure-reduction valve allows you to set the pressure to exactly the desired value.Features: Weight: 230g Length: 270mm Output max: 25 bar/360PSI Buy SKS Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Aluminium bodied with a plastic pump handle and a bright, easy to read pressure gauge, the SAM (Suspension Air Mechanic) connects to your shock valve via its swivelling hose connection, which is reinforced with a flexible steel mesh for added strength against the pump's 360 psi air pressure capability. A 2-stage threaded connector helps to eliminate any air/pressure loss when you are finished pumping for optimum efficiency. Accurate pressure is also guaranteed thanks to a pressure-reduction valve just below the gauge, making the SAM Suspension Pump a precise and reliable tool for keeping your shocks in check.
The best solution in the case of all eventualities: the SKS mudguard made of high-performance impact-resistant plastic in a black, matt-gloss design is integrated on the rear wheel in such a way that the frame and wheel form a single unit. The very long mudguard perfectly deflects dirt and spray water. Another advantage: the MUDROCKER is also suitable for full suspension bikes and mountain bikes with a Vario seat post. It is mounted on the seat bars of the rear fork with rubberised hook and loop fasteners. The soft, wedge-shaped pad in the mounting brackets protects the frame, can be rotated and used in two different positions for height adjustment. Like this, the distance to the tyre can be perfectly adjusted. Another type of protection is provided by the extender which can optionally be inserted and slid towards the seat bar. It can be specifically adapted using scissors and provides protection against dirt in the bottom bracket area and on the derailleur. In addition, a further extension provides even more protection against splashing water. If necessary, it can be easily attached to the lower rear end of the mudguard. Hook and loop fasteners and a frame protection film are included.Product is for Rear mudguard only
Key Features:Weight: 265g / 275g,Wheel size: 26", 27,5" (650b) " / 29 " ,Max tyre width: 3.0",Length rear fender: 550mm / 620 mm.
The Bluemels mudguard set comes in two colours (silver & black). Matt black and reflective versions are also availableKey Features:45mm or 35mm wide with fixed bridges,3mm stainless steel stays,Front angle, sliding bridges and fixed bridges made from stainless steel,Security fastening ASR joint, angle adjustable Wheel Size: 28 (700c).
SKS Mudrocker Rear MudguardThe SKS Mudrocker Rear is the ideal rear fender for enduro racing and all mountain rides. It features a long, wide and durable design that's adjustable to suit most suspension travel and linkage types. This rear mudguard is designed to ensure your face is protected from spray, mud and grit from the trail. And it's durable and dependable construction is lightweight and compatible with multiple wheel and tyre sizes.Durable, Protective and High-Performance Mountain Bike MudguardThe best solution in the case of all eventualities: the SKS mudguard is made of high-performance impact-resistant plastic with its design that attaches securely to the frame's rear seat stays. This very long mudguard perfectly deflects dirt, spray and grit when riding across even the most demanding terrains. And it's also suitable for full suspension bikes and mountain bikes with a Vario seat post. Secure and Adjustable Rear ProtectionThis rear mudguard is mounted onto frame seat stays using rubberised hook and loop fasteners. It features a soft, wedge-shaped pad in the mounting brackets that protects the frame while also enabling it to be rotated and used in two different positions for height adjustment. This also gives you greater tyre clearance adjustment for different tyre sizes.Protects Against Mud, Water Spray and GritAt the front of the mudguard, the SKS Mudrocker Rear Mudguard features an extender that provides additional protection for your bike's bottom bracket and front derailleur. Plus, it can be specifically adapted using scissors to get the perfect fit. In addition, a further extension provides even more protection against splashing water. If necessary, it can be easily attached to the lower rear end of the mudguard.Please Note: Hook and loop fasteners and a frame protection film are included.Features: Material: Plastic Weight: 240g Length: 840mm Wheel Size: 27.5" (650b), 28", 29" Tyre Width in Inches: 2.2 - 3.0" Tyre Width in Millimetres: 59- 76mm Manufacturers Part Number: 11670Buy SKS Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
The SKS Raceblade Pro mudguards are ideal for touring, commuting and road bikes with tyres up to 25mm. Constructed from lightweight chromoplastic they offer optimal spray protection with a snug fit close to the wheel. Quick and easy to fit removeExtended mudflap provides excellent coverageSuitable for 700c tyres up to 25mm wideThe quick and practical tool free mounting means you can fit/remove them in seconds which is great if the weather suddenly changes before a ride. There is always a trade off with mudguards; you don't want to get filthy, but mudguards would take away the look of your bike. Luckily thanks to the high quality aerodynamic design of the Raceblade Pro you can stay protected from the elements and rest assured that your bike will look just as good with them as it does without them.
The best solution in the case of all eventualities: the SKS mudguard is made of high-performance impact-resistant plastic with a design that attaches securely to the frame's rear seat stays. This very long mudguard perfectly deflects dirt, spray and grit when riding across even the most demanding terrains. And it's also suitable for full suspension bikes and mountain bikes with a Vario seat post. Secure and Adjustable Rear Protection This rear mudguard is mounted onto frame seat stays using rubberised hook and loop fasteners. It features a soft, wedge-shaped pad in the mounting brackets that protects the frame while also enabling it to be rotated and used in two different positions for height adjustment. This also gives you greater tyre clearance adjustment for different tyre sizes. Protects Against Mud, Water Spray and Grit At the front of the mudguard, the SKS Mudrocker Rear Mudguard features an extender that provides additional protection for your bike's bottom bracket and front derailleur. Plus, it can be specifically adapted using scissors to get the perfect fit. In addition, a further extension provides even more protection against splashing water. If necessary, it can be easily attached to the lower rear end of the mudguard. Please Note: Hook and loop fasteners and a frame protection film are included.
Mudguards don't have to be fragile and ugly, as proved the stylish and supremely durable SKS Edge Aluminium Mudguards! With a modern look teamed with a solid construction that is easy to fit, the Edge Aluminium Mudguards are ideal for commuter or adventure bikes.Stylish aluminium mudguards with subtle matt black finishExtremely durable construction and easy to use 3 point fixing systemSuitable for 27.5" & 700c wheelsTwo widths available; 46mm & 56mmGuards are 46mm or 56mm wide and weigh 543g/568g including fittingsThere's no doubt mudguards are godsend when conditions are wet but many are not the most visually appealing shall we say. The SKS Edge Aluminium Mudguards look great thanks to their sleek and stylish aluminium design, keeping the smooth lines of your bike largely intact. Not only are they stylish, the aluminium construction and 3 point fixing system means they are supremely durable and easy to fit too. Compatible with 27.5" & 700c wheels, the SKS Edge Aluminium Mudguards are the perfect choice for riders who want a set of stylish and durable mudguards for their commuter or adventure bike.Specifications:46mm:Material: AluminiumWeight: 543gWheel size: 27,5"(650b)" & 700cTyre width in inches: 28-40 mmLength front fender: 740mmLength rear fender: 1200mm56mm:Material: AluminiumWeight: 568gWheel size: 27,5" (650b)" & 700cTyre width in inches: 38-50mmLength front fender: 740mmLength rear fender: 1200mm
Mudguards don't have to be fragile and ugly, as proved the stylish and supremely durable SKS Edge Aluminium Mudguards! With a modern look teamed with a solid construction that is easy to fit, the Edge Aluminium Mudguards are ideal for commuter or adventure bikes.Stylish aluminium mudguards with subtle matt black finishExtremely durable construction and easy to use 3 point fixing systemSuitable for 27.5" & 700c wheelsTwo widths available; 46mm & 56mmGuards are 46mm or 56mm wide and weigh 543g/568g including fittingsThere's no doubt mudguards are godsend when conditions are wet but many are not the most visually appealing shall we say. The SKS Edge Aluminium Mudguards look great thanks to their sleek and stylish aluminium design, keeping the smooth lines of your bike largely intact. Not only are they stylish, the aluminium construction and 3 point fixing system means they are supremely durable and easy to fit too. Compatible with 27.5" & 700c wheels, the SKS Edge Aluminium Mudguards are the perfect choice for riders who want a set of stylish and durable mudguards for their commuter or adventure bike.Specifications:46mm:Material: AluminiumWeight: 543gWheel size: 27,5"(650b)" & 700cTyre width in inches: 28-40 mmLength front fender: 740mmLength rear fender: 1200mm56mm:Material: AluminiumWeight: 568gWheel size: 27,5" (650b)" & 700cTyre width in inches: 38-50mmLength front fender: 740mmLength rear fender: 1200mm
Give your bike a cool new look!The super stylish Stingray range compliments the popular Bluemels range with a selection of modern colours within a matt black design. Includes all black stainless steel stays and hardware for the ultimate finishing touch. Size: 28 inch / 700c
The SKS SAM (Suspension Air Mechanic) suspension pump is right for any tour, with its mini pump design. The swivelling hose connection is reinforced with a flexible steel mesh, which is as it should be, given the maximum pressure in excess of 315 PSI. The Schrader connection is made with a new 2-stage threaded connector, making it possible to screw off without any loss of pressure. A pressure-reduction valve allows you to set the pressure to exactly the desired valueMaterial: Aluminium / PlasticColour: SilverWeight: 273gValve: SchraderOutput max: 25 bar / 360 PSILength: 270mm
The VeloFlexx Mudguard Set combines the stability of a fixed mudguard with the flexibility of a clip-on mudguard. This mudguard profits from a continuous profile therefore, it s only compatible with bikes with disc brakes. The VeloFlexx bridge allows the rear mudguard to be attached at the top of the seat stay without tools using rubber straps. That s why this way of mounting doesn t rely on the cross stay anymore where the caliper brake is usually bolted. At the front, the VeloFlexx is mounted to the fork bridge with a rubberised hook and loop fastener or a cable tie. The frame adapters enable it to be mounted to any fork the can the angle be adjusted. The black-coated stays provide even greater support. Includes hook and loop fasteners and tension rubber!Colour: BlackWeight: 600g / 625gMax. outer diameter: 35mmWheel size: 26", 27,5", 29 Length front fender: 605mm / 700mmLength rear fender: 850mm / 930mm
The VeloFlexx Mudguard Set combines the stability of a fixed mudguard with the flexibility of a clip-on mudguard. This mudguard profits from a continuous profile therefore, it s only compatible with bikes with disc brakes. The VeloFlexx bridge allows the rear mudguard to be attached at the top of the seat stay without tools using rubber straps. That s why this way of mounting doesn t rely on the cross stay anymore where the caliper brake is usually bolted. At the front, the VeloFlexx is mounted to the fork bridge with a rubberised hook and loop fastener or a cable tie. The frame adapters enable it to be mounted to any fork the can the angle be adjusted. The black-coated stays provide even greater support. Includes hook and loop fasteners and tension rubber!Colour: BlackWeight: 600g / 625gMax. outer diameter: 35mmWheel size: 26", 27,5", 29 Length front fender: 605mm / 700mmLength rear fender: 850mm / 930mm
The VeloFlexx Mudguard Set combines the stability of a fixed mudguard with the flexibility of a clip-on mudguard. This mudguard profits from a continuous profile therefore, it s only compatible with bikes with disc brakes. The VeloFlexx bridge allows the rear mudguard to be attached at the top of the seat stay without tools using rubber straps. That s why this way of mounting doesn t rely on the cross stay anymore where the caliper brake is usually bolted. At the front, the VeloFlexx is mounted to the fork bridge with a rubberised hook and loop fastener or a cable tie. The frame adapters enable it to be mounted to any fork the can the angle be adjusted. The black-coated stays provide even greater support. Includes hook and loop fasteners and tension rubber!Colour: BlackWeight: 600g / 625gMax. outer diameter: 35mmWheel size: 26", 27,5", 29 Length front fender: 605mm / 700mmLength rear fender: 850mm / 930mm
Stylish cycling pleasure with a safety system A brilliant performance! The SKS BLUEMELS BASIC mudguard set can not only be perfectly integrated onto the bike but also reliably protects against dirt and spray water. Thanks to the flexible sandwich construction in which ultra-fine aluminium strips are embedded in a plastic coating the mudguards are extremely robust rigid and corrosion-resistant.With its shiny black surface and black fastening components the BLUEMELS BASIC also leaves nothing to be desired in terms of appearance. The ASR safety system uncouples the stays should branches become trapped between the spokes so the wheel is unable to jam. The V-stays with fixed bridges guarantee individual adjustment. The bottom bracket cutouts make mounting possible even when installation clearance is small. Includes accessories and stays. FEATURES Color | black Material | plastic Sandwich construction made of aluminium/plastic V-stays with fixed bridges for flexible adjustment ASR safety system Bottom bracket cutouts
Solid floor pump for air powerGrounded: The SKS AIRKOMPRESSOR COMPACT 10.0 floor pump impresses with a sturdy steel tube, an easy-to-read precision pressure gauge and the improved “MV EASY” MULTI VALVE head for all valve types. The robust base made of plastic gives the pump stability and the plastic handle rests comfortably in the hand.The ideal entry-level pumpBike tyres can be easily inflated to a pressure of 10 bar (385 cm³ stroke) with this compact stand pump. The ideal entry-level pump for recreational cyclists.Sturdy steel tube,Precision pressure gauge,“MV EASY” MULTI VALVE head for all valve types,Ideal entry-level pump,Made in Germany.Key Features:Colour: black/orange,Hose length: 800 mm,Valve: AV, SV, DV,Output max: 10 bar / 144 PSI,Height: 600 mm,Cylinder inner: metal,Foot: plastic,Handhold: plastic.
The SKS Chromoplastic mudguards have been around for years and are ideal for audaxers, tourers and commuters. Beefy 3.4mm stays fix them in place; there's SKS's Secu-Clip at the front which holds the stays securely but is designed to pop out in an emergency such as a stone caught under the guard. The front guard features a mud flap while the rear guard has a reflector to help keep you visible in low light conditions.
The SKS Chromoplastic mudguards have been around for years and are ideal for audaxers, tourers and commuters. Beefy 3.4mm stays fix them in place; there's SKS's Secu-Clip at the front which holds the stays securely but is designed to pop out in an emergency such as a stone caught under the guard. The front guard features a mud flap while the rear guard has a reflector to help keep you visible in low light conditions.
The SKS Chromoplastic mudguards have been around for years and are ideal for audaxers, tourers and commuters. Beefy 3.4mm stays fix them in place; there's SKS's Secu-Clip at the front which holds the stays securely but is designed to pop out in an emergency such as a stone caught under the guard. The front guard features a mud flap while the rear guard has a reflector to help keep you visible in low light conditions.