SKS Bluemels Reflective Fixed Mudguard SetThe SKS Bluemels Reflective Mudguards are high quality, low cost, full length guards with stainless-steel fittings and a reflector on the rear that protect in the wettest and muddiest of conditions.Features:28" 35mm fitting3mm twin-parallel, stainless-steel staysSecu Clip 'break-away' fittings on front staysPET constructionMud flaps front onlyWeight: 495g pairBuy SKS Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Add wet weather protection to your commuting or trekking bike with the supremely stylish EDGE AL aluminium mudguards.Following hot on the heels of the popular EDGE AL 46mm, the EDGE AL 56mm is suitable for tyre widths up to 50mm / 2”. The angular profile and matt black scratch-resistant finish are complemented by a clean 3 point fixing system with black U-shaped stays for a discreet appearance.
Providing huge coverage, this Longboard Mudguard will put a stop to wet feet and a soggy bottom. Simply fit, forget, and enjoy riding in the rain with this Longboard Mudguard Set.
If you're looking to reduce the spray from you tyres the Bluemels Reflective Mudguards is a great value edition to any compatible bike.
SKS Bluemel Reflective Mudguard SetSKS Commuter mudguards are a high quality, low cost, full length guards with stainless-steel fittings.Features: 28" 45mm fitting 3mm twin-parallel, stainless-steel stays Secu Clip 'break-away' fittings on front stays PET construction Mud flaps front only Weight: 495g pairBuy SKS Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
The reflective Bluemels mudguard set comes in two colours (silver & black) and includes rear reflector plus an extended mud flap in the front. Bluemels mudguard set have been developed utilizing 3M reflective material to ensures a better visibility in dark hours and thus more safety on the road. Please Note: These mudguards are designed to fit with 700c wheels but the metal stays may require cutting with a hacksaw or heavy duty wire cutters during fitting.
The VELOFLEXX mudguard set combines the stability of a fixed mudguard with the flexibility of a clip-on mudguard. The VELOFLEXX bridge allows the rear mudguard to be mounted at the top of the seat bar without tools, using rubber straps. This mounting solution no longer requires the brake bridge where the brake caliper is usually mounted. At the front, the VELOFLEXX is mounted to the fork bridge with a rubberised hook and loop fastener or a cable tie. The frame adapters enable it to be mounted to any fork. Furthermore the angle of the adapters can be adjusted. The black-coated stays provide even greater support. They are fastened with hook and loop fasteners (front) and rubber straps (rear) without the need for tools. The disassembly is also quick and hassle-free. The VELOFLEXX set is available in three different widths and suitable for fitness bikes, mountain bikes (Cross Country/All Mountain) and city bikes. Hook and loop fasteners and rubber straps are included in the scope of delivery.Key Features:Flexible but sturdy,Tool-free assembly and disassembly,Frame adapter with adjustable angle,Ideal solution for disc brake bicycles,Wheel Size:26", 27,5", 28 " / 29”,weight: 580g / 600g / 625g.
Mudguard set with a flexible spoilerKey Features:Sandwich construction made of aluminium/plastic,With a flexible spoiler,V-adapter with ESC safety system,Sturdy double U-stays,Made in Germany.
The SKS Race Blade is a highly trusted mudguard by the road cycling fraternity and this version provides even more coverage keeping you and your bike as clean and grot free as possible. The longer guard will keep your cycling buddies morale up as they won't get a face full of road spray when riding in a group on wintery and wet rides as the extra coverage prevents nearly all spray from showering the rest of the group as well as yourself.A simple fitting system means these guards can be fitted to any road bike that does not have standard mudguard clearance in a hassle free manner in a matter of minutes leaving more time for you to get out and ride. If you and your riding buddies are suffering from your spray problems and fed up of being cold, damp and miserable then rectify that situation with the SKS Race Blade Long.Perfect For Winter Road Bikes Without Standard Mudguard ClearanceExtra Long BladeMinimises Spray To Almost ZeroEasy And Hassle Free FittingTough CAB Plastic3.4 mm Stainless Steel Stays To Provide Extra Stiffness EditAdjustable For Precise FitFits 18-25 mm Tyres Weight: 493g (Including Fittings)
Designed specifically for the latest breed of gravel, adventure and cyclocross bikes with tyres exceeding 32mm in width, the SKS Speedrocker Mudguards give excellent coverage from road or trail spray in an easy to fit and versatile package.Designed for gravel, adventure and cross bikes with tyres up to 42mm wideDual height front guard deflects water away from the rider's faceRear guard uses a telescopic extension for greater coverage near seat tubeHeld firmly in place with rubber fastening system to suit a range of frame designsWhile many gravel and adventure bikes have the necessary mounts for mudguards, not all do and this is one of the key benefits of the SKS Speedrocker. Thanks to it's easy to use rubber fastening system, the Speedrocker is easy to mount to a range of frame designs and is capable of accepting 700c tyres up to 42mm in width; perfect for the latest bread of wider gravel, adventure and cross tyres. Offering excellent protection in a stylish and versatile package, the SKS Speedrocker is an ideal choice if you want to fit mudguards to you adventure, gravel or cross bike.
The classic and still the best full coverage mudguard. Complete set for front and rear with traditional and unmistakable decorative stripes. Reflector and spoilers included. Available in a wide range of sizes.• 3.4mm stainless steel stays• Front fork crown fitting sliding bridge and fixed bridges made of stainless steel• Including stainless steel assembly kit and fitting bolts• Secu clip “break-away” fittings on front stays avoid blocking of the wheel when an object gets between tyre and mudguard• 55mm wideSKMCPRS55266 – 26” x 55mm silverSKMCPRS5526B – 26” x 55mm black
The classic and still the best full coverage mudguard. Complete set for front and rear with traditional and unmistakable decorative stripes. Reflector and spoilers included. Available in a wide range of sizes.• 3.4mm stainless steel stays• Front fork crown fitting sliding bridge and fixed bridges made of stainless steel• Including stainless steel assembly kit and fitting bolts• Secu clip “break-away” fittings on front stays avoid blocking of the wheel when an object gets between tyre and mudguard• 65mm wideSKMCPRS65266 - 26” x 65mm silverSKMCPRS6526B – 26” x 65mm black
The classic and still the best full coverage mudguard. Complete set for front and rear with traditional and unmistakable decorative stripes. Reflector and spoilers included. Available in a wide range of sizes.• 3.4mm stainless steel stays• Front fork crown fitting sliding bridge and fixed bridges made of stainless steel• Including stainless steel assembly kit and fitting bolts• Secu clip “break-away” fittings on front stays avoid blocking of the wheelwhen an object gets between tyre and mudguard• 45mm or 50mm wideSKMCPRS45286- 700C x 45mm silverSKMCPRS4528B- 700C x 45mm blackSKMCPRS50286- 700C x 50mm silverSKMCPRS5028B- 700C x 50mm black
A new MTB specific set of mudguards offering superior protection. The front Shockblade offers greater coverage than a downtube mounted mudguard and is compatible with suspension forks. It integrates an efficient quick-release system for easy fitting and removal. The Shockblade is complimented by the highly adjustable rear X-Blade utilising a dual pivot design to customise the fit a super-strong quick-release fitting for ease of fitting & removal and a dual compound construction with a softer material at the trailing edge for greater flexibility.
The SKS AIR-X-Plorer 10.0 floor pump with a sturdy metal base ensures exceptionally high stability. Thanks to the large steel tube, even higher pressures up to 10 bar can be easily pumped into the tyres (476 cm³ stroke). With the extra-long high-pressure hose, pumping is not only more comfortable, but also gentle on the valves. Other user-friendly features include the large precision pressure gauge, the ergonomically shaped soft-touch handle and the optimised MV Easy Multi Valve head for all valve types.Good power transfer for effortless pumpingSturdy steel tube / metal baseEasy-to-read precision pressure gaugeLong high-pressure hoseErgonomically shaped soft-touch handle MV Easy Multi Valve head for all valve typesMade in GermanyColour: black/orangeHose length: 1200 mmValve: AV, SV, DVOutput max: 10 bar / 144 PSIHeight: 710 mmCylinder inner: metalFoot: metalHandhold: soft-touch-grip
The classic and still the best full coverage mudguard. Complete set for front and rear with traditional and unmistakable decorative stripes. Reflector and spoilers included. Available in a wide range of sizes.• 3.4mm stainless steel stays• Front fork crown fitting sliding bridge and fixed bridges made of stainless steel• Including stainless steel assembly kit and fitting bolts• Secu clip “break-away” fittings on front stays avoid blocking of the wheelwhen an object gets between tyre and mudguard• 35mm wideSKMCPRS35286 - 700C x 35mm silverSKMCPRS3528B- 700C x 35mm black
Sturdy floor pump with a precision pressure gauge Stable: The SKS AIR-X-PLORER 10.0 floor pump with a sturdy metal base ensures exceptionally high stability. Thanks to the large steel tube even higher pressures up to 10 bar can be easily pumped into the tyres (476 cm³ stroke). With the extra long high-pressure hose pumping is not only more comfortable but also gentle on the valves. Good power transfer for effortless pumping Other user-friendly features include the large precision pressure gauge the ergonomically shaped soft-touch handle and the optimised “MV EASY” MULTI VALVE head for all valve types. Sturdy steel tube / metal base Easy-to-read precision pressure gauge Long high-pressure hose Ergonomically shaped soft-touch handle “MV EASY” MULTI VALVE head for all valve types Made in Germany Features Colour: black/orange Hose length: 1200 mm Valve: AV SV DV Output max: 10 bar / 144 PSI Height: 710 mm Cylinder inner: metal Foot: metal Handhold: soft-touch-grip
SKS MSP Shock Pump MSP (Mountain Suspension Pump) is a must in every bike backpack. The flexible steel mesh hose unscrews from the pump barrel for compact travel.The valve connection is made with a new 2-stage thread connector, making it possible to screw on and off without loss of pressure. Pressure reduction dial allows you to reach exactly the desired value. Features: Valve Schrader Ouput max: 20 bar Weight: 150g Max Pressure: 290 psi Buy SKS Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Dirty water and spray water don’t stand a chance with the BLUEMELS mudguard set. The classic SKS mudguards in a matt design also visually enhance your bike. The BLUEMELS mudguards are not only distinguished by their clean design, but also by their easy mounting and the spoilers on the front and rear wheel. Thanks to the flexible sandwich construction, in which ultrafine aluminium strips are embedded in a plastic coating, the mudguards are extremely robust, rigid and corrosion-resistant.Excellent protection thanks to the close-to-tyre mountingThe ASR safety system uncouples the stays should branches become trapped between the the spokes, so that the wheel is unable to jam. Includes a stays kit, stainless steel fixed bridge and mounting material.Key Features:Sandwich design made from aluminium/plastic,Robust, rigid and corrosion-resistant,With an ASR safety system,Stainless steel fixed bridge,Front angle, sliding bridges and fixed bridges made from stainless steel,Security fastening ASR joint, angle adjustable,Made in Germany,Packaging may state 28", which is the European equvalent of 700c..