The Park Tool TSB2.2. is the tilting base specifically designed for use with the Park Tool TS2 and TS2.2 Professional Wheel Truing Stands. It allows for adjustment of the truing stand 20 degrees forward or backward for comfortable use at any bench height. The handy bins in the front of the Tilting Base are specially designed to hold Park Tool Spoke Wrenches and other small items such as spoke nipples.
Commonly referred to as a “4th Hand” the Park Tool Cable Stretcher pulls cables tight for adjustment of derailleurs and brakes. It features one-hand operation with a thumb lock to hold the cable tight while your hand is freed up to tighten bolts and nuts. A must-have for any shop home or professional. BT-2 FEATURES Thumb lock for one-handed operation Made from chrome plated heat treated steel Cushion grips for comfort
A simple, one position version of the Park Tool WH-1 Wheel Holder. The Park Tool WH-2 is a quick and easy solution to securely hold nearly any wheel to make tyre, wheel, cassettes and hub work a snap. Can be bolted or clamped to a bench or installed in a bench vice. Includes axles and adaptors to fit 12, 15 and 20mm thru axles as well as quick-release and solid axle hubs.Quick and easy access to hold virtually any wheel to perfectly position your work for a variety of tasks including but not limited to:Wheel buildingCassette removal and installationTyre and tube removal and installationTubeless tire workGeneral cleaningHub workAccepts 12, 15, and 20mm thru axles and 5mm skewersE-Nickel finish for durability*Fasteners not included. The holes will accept a fastener that s up to 3/8 in diameter.
Installing cables internally though your frame can test anyone s patience however with this Internal Cable Routing Kit from Park Tool you can get the job done efficiently without any stress.This kit can help you to route gear cables, electric wires, brake cables etc on any type of bike frame whether its carbon, aluminium, titanium etc. This kit has four plastic coated 250cm cables with magnets attached and each with a unique fitting for different cable types. There s also an external guide magnet which allows you to speed up the operation. Opposite polarity magnets on the cables will attach themselves inside the frame tube making it simple to route through the frame.To keep up with new technologies this kit now includes a dedicated e-tube Di2 cable connector that will easily pull through a 6mm frame hole. This makes it easy to route through the frame saving you valuable time and this kit can be used with any frame size including tandems.This kit includes:4 x Plastic coated 250cm Cables with magnetsUnique fittingsExternal Guide Magnet
Adding this adaptor will allow you to work on Cannondale® Lefty™ wheels, as well as 12mm, 15mm, 20mm and 25mm thru axle front wheels. increasing the capabilities of the TS-2.2 and TS-3 Truing Stands by making them compatible with rear 135mm thru axle hubs, the Truing Stand Thru-Axle Adaptor TSTA will also allow for all rear thru axle hubs to be worked on with TS-8, TS-25, TS-15, TS-7 and TS-5 stands. Constructed from a durable ACME rod, two centring cones and turning knobs at each end, this is a vital device for making your Park Tool Truing Stand more adaptable.
An accurate and truly versatile wheel alignment gauge that belongs along side every truing stand.
Park Tool Professional Wheel Alignment Gauge WAG-4For a wheel to perform properly, it is important for the rim to be centered between the locknuts of the hub, or “dished”. To check this, and to make precision adjustments, a wheel alignment gauge (also called a “dishing tool”) is a must.An accurate and truly versatile wheel alignment gauge that belongs along side every truing stand.Features:The WAG-4 allows easy checking of the dish on road, mountain, or BMX wheels from 16” to 29” (ETRTO or ISO rim sizing of 305-630)Works with any hub widthCan be accurately used with the tire still on the wheelWeight: 1.7lbs. (0.77 kilograms) Buy Park Tool Workshop Tools from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Beam Type 0-60Nm Torque Wrench TW-2.2 The Park Tool Beam Type TW-2.2 is a high-quality torque wrench for mid to high torque fitting requirements. With a max torque output of 60 Nm, it's ideal for use when tightening high-performance road and mountain bike components. And it has a 3/8" drive head while being compatible with all Park Tool sockets, bits, and crow feet.Durable and Precise Beam Type Torque WrenchAn economical option for safely and accurately tightening fasteners to proper torque specifications. With a simple gauge readout, the TW-2.2 is intuitive and easy to use and applies up to 60 Nm of torque to any fastener or component with left or right-handed threads. Perfect for mid-to-high-torque applications such as bottom brackets, cassette lockrings, and crank bolts. 3/8" drive for compatibility with all Park Tool sockets, bits, and crow feet, as well as most threaded bottom bracket tools.Features: Drive Head: 3/8" Max Torque Reading: 60 Nm Left- and Right-hand thread compatible Ideal for fitting stems, levers and Carbon Fibre components For Low-Torque fittings Compatible with all Park Tool sockets, bits, and crow feetBuy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Freewheel Remover Wrench FRW-1The FRW-1 is a one-inch socket and securely holds freewheel and lockring tools (FR-1 through FR-8 plus the BBT-5/FR-11) for removal and installation. Features an investment cast head with locking setscrew and a long, round, vinyl-dipped handle for superior leverage.Features: One inch socket Securely holds freewheel Investment cast head Lone, round, vinyl dipped handle Note: Always use a skewer or axle nut to hold a cassette/freewheel tool in place during removalBuy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Thru Axle Adaptor (TS-TA) A fantastic addition to any Park Tool truing stand, the Park Tool Thru Axle Adaptor TS-TA allows for a wider range of wheels and hubs to be worked on, making your stand more versatile and adaptable than ever before. Added Versatility and Adaptability The application of the Park Tool Truing Stand Thru-Axle Adaptor TSTA means that your Truing Stand's capabilities will be increased for working on thru axle front wheels sized 12mm, 15mm, 20mm and 25mm, plus Cannondale Lefty wheels, making it a must-have adaptor for the mechanic looking to expand his workload. With Park Tool's TS-2.2 and TS-3 Truing Stands in mind, the adaptor will see them become more compatible with rear 135mm thru axle hubs, while their other models such as the TS-8, TS-25, TS-15, TS-7 and TS-5 will be able to handle all rear thru axles by incorporating this well-crafted adaptor from Park Tool. Features: Construction: Durable ACME Centre Rod, 2 x Centring Cones, 2 x Turning Knobs Compatibility: All Park Tool Truing Stands including - TS-2.2, TS-3, TS-8, TS-25, TS-15, TS-7 and TS-5 Buy Park Tool Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
Cut any threadless fork steerer quickly and accurately with this handy saw guideSlotted especially for thicker carbon cutting blades which do not fit in standard cutting guidesYou can easily remove as little as 1 mm from the carbon steerer length for perfect headset installation and adjustmentHeat treated for long lifeThe composite body will not damage the fork's steerer but has steel threads and inserts to withstand heavy shop useSuitable for all unthreaded steerer tubes up to 1-1/4 inches
Never let accuracy be your nemesis with this simple yet highly effective toolCan be used with or without the tyre fitted to the wheel thanks to its innovative designEnsures the rim is centred between the locknuts of the wheel hubAny hub width can be accommodatedFits wheels from 16 to 29 inches
Cut any threadless fork steerer quickly and accurately with this handy saw guideYou can easily remove as little as 1 mm from the fork steerer length for perfect headset installation and adjustmentHeat treated for long lifeThe composite body will not damage the fork's steerer but has steel threads and inserts to withstand heavy shop useSuitable for all unthreaded steerer tubes up to 1-1/4 inches
Cut any threadless fork steerer quickly and accurately with this handy saw guideSlotted especially for thicker carbon cutting blades, which do not fit in standard cutting guidesYou can easily remove as little as 1 mm from the carbon steerer length for perfect headset installation and adjustmentHeat treated for long lifeThe composite body will not damage the fork's steerer, but has steel threads and inserts to withstand heavy shop useSuitable for all unthreaded steerer tubes up to 1-1/4 inches.
Never let accuracy be your nemesis with this simple yet highly effective toolCan be used with or without the tyre fitted to the wheel, thanks to its innovative designEnsures the rim is centred between the locknuts of the wheel hubAny hub width can be accommodatedFits wheels from 16 to 29 inches
The world's largest bike tool manufacturer is the first choice of professional and home bicycle mechanics around the world.
Park Tool Crown Race Setting System - CRSAs a manufacturer of bicycle specific tools since 1963 you can safely rely on Park Tools' many years of experience. The world's largest bike tool manufacturer is the first choice of professional and home bicycle mechanics around the world.Features: Precision installation tool specifically designed for setting headset crown races Accurately places the crown race whilst distributing the impact evenly and without damage to the bearing surface Safer, more accurate alignment and easier to use than traditional slide hammersBuy Park Tool Workshop Tools from Chain Reaction Cycles, the World's Largest Online Bike Store.
The Campag Crank & Bearing Tool Set CBP-8 comes equipped with everything you need to get to work on your specialised cranks and bearings, taking them off and putting them back firmly and safely to keep your pedalling in peak condition. The set features a Power Torque compatible crank puller, crank removal extension plug and crank bearing removal adaptor as well as a bearing puller and setter which will also work with Ultra-Torque systems. Completing the set are protective pads and adaptors for use with both carbon and aluminium cranks, making it just the job for an often arduous task.
Park Tool Campag Crank & Bearing Tool Set (CBP-8)The Campag Crank & Bearing Tool Set CBP-8 features everything you need to safely and efficiently remove and install on Campagnolo and Fulcrum Ultra-Torque and Power Torque crank and bottom bracket systems. Safe Removal and Installation of Cranks and Bottom BracketsThe CBP-8 includes a crank puller for aluminium and carbon fibre Power Torque systems, a bearing puller for Power Torque and Ultra Torque systems and a bearing setter for both systems, making the job of replacing your cranks and BBs less labour intensive. Also included in the set are: Removal adaptor for Power Torque crank bearings Removal protection pads for use with carbon cranks Removal protection adaptor for use with aluminium crank arms Crank removal extension plug for Power Torque Buy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Sliding Thru Axle Adaptor (1729-TA)The 1729-TA Sliding Thru Axle Adaptor is designed to allow any Park Tool PRS-20, PRS-21 or PRS-23 Repair Stand to accept 12mm and 15mm thru axle wheeled bikes. A great addition to the kit if you service multiple bikes including many cyclocross and road bikes that are increasingly featuring through axles. Features: Genuine part Works with Park Tool PRS-20, PRS-21 or PRS-23 Repair Stand Accepts 12mm or 15mm axlesBuy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.