Oversized centre hole and thin wall design allows use without removal of cones and locknuts Oversized centre hole and thin wall design allows use without removal of cones and locknuts Investment cast and heat-treated for strength and durability 1' base fits end of SR-1 FRW-1 Park tools or simply an adjustable wrench or bench vice Fits most four notch BMX freewheels including hubs with 14mm oversize axles Made in the USA and covered by Park Tool's legendary limited lifetime warranty
Compact lightweight and designed for use with all chains except Campagnolo® 11 speed hollow pin chains. Includes: 5 6mm Allen keys Chain hook Allen keys and chain tool fit together to form an easily stored unit All hardened steel tools Clever design allows easy operation of tools both separately and in unison 105g
Economical, durable and versatile, the PFP-8 is the successor to the best selling PFP-6 and equally at home in the garage, workshop or at the trailheadThe smooth and durable steel barrel is a rarity at this pricepoint and greatly improves durability whilst improving efficiency at high pressuresComposite head with thumb lock fits Presta, Schrader, and Dunlop valvesStable steel base with large foot-padsGiant, easy to read gauge is integrated into the base, protecting it from harm and improving stabilityComfortable composite handleMost parts available as spares.
Features:A Poly-urea based grease developed for bicycle use.High shear strength for good load bearing capacity, even in extreme conditions.Perfect for use in all areas of a bicycle and 100% carbon safe.PolyLube repels moisture and is compatible with other greases
Features:The perfect collection of brushes for cleaning your bike.Contains brushes, each specially designed for a specific cleaning purpose.Ergonomically designed, dual density sure grip handles.GSC-1 Gear Clean brush.Tapered detail brush.Frame cleaning sponge/bristle brush.Soft bristle soaping brush.Covered by Park's legendary limited lifetime warranty.
The MT-20 is a high quality, folding take-along toolKey Features:Features forged aluminum side plates.Hardened and plated tools.Smooth ergonomic operation.3, 4, 5 and 8mm hex wrenches.T25 Torx® compatible driver.Combo cross/straight tip screwdriver.CO2 adapter.Key ring holder.95 grams.
The MT-10 is a high quality, folding take-along tool.Key Features:Features forged aluminum side plates.Hardened and plated tools.Smooth ergonomic operation.3, 4, 5 and 8mm hex wrenches.T25 Torx® compatible driver.Combo cross/straight tip screwdriver.Key ring holder.76 grams.
Key Features:The MT-40 is a high quality, folding take-along tool.Features forged aluminum side plates.Hardened and plated tools.Smooth ergonomic operation.2.5, 3, 4, 5, 6 and 8mm hex wrenches.T25 & T30 Torx® compatible driver.Combo cross/straight tip screwdriver.CO2 cartridge inflator adapter.Key ring holder.243 grams.
Features:Also called a sleeping hub, the DH-1 fits into a frames rear dropouts to replace the rear wheel for chain cleaning and transport.The unique design allows shifting with the DH-1 installed.Works with all derailleur and 1/8 inch chains.Works on frames with both open-type dropouts and 12 mm thru axle dropouts.
The TL-6 is a composite covered, steel core tyre ever set that offers an optimum trade off, being stiff and strong, yet gentle on your rims.Key Features:Ideal for removing stubborn tubeless tyres from costly lightweight wheels.Light enough to take along but also ideal as a workshop lever.Updated with a tougher, more slippery composite material.Protruding steel tip more easily and securely engages tire bead.Sold in pairs.Covered by Park Tool's legendary limited lifetime warranty.
A classic spoke wrench, shaped for comfort and convenience.Key Features:Professional quality hardened and nickel plated spoke wrench ensures a long life.Vinyl coated handles are colour coded in grey to make for quick size recognition.Designed to fit DT Swiss Torx splined nipples, as found on Tricon models.Made in the USA and covered by Park Tool's legendary limited lifetime warranty.
An updated version of the original and best selling Park Master Link pliersMany non-Shimano derailleur chains use a master link that allows the chain to be installed and removed by handWhile this type of masterlink doesn't require a traditional chain tool, over time, dirt and corrosion can make it very difficult to separate by handMLP-1.2 Master Link Pliers have cleverly redesigned tips, allowing them to be used to rejoin stiff or corroded master links as well as split themSimply insert the specially sized jaws into the masterlink and squeeze the handlesMade in the USA and covered by Park's legendary limited lifetime warranty.
Key Features:The #752 is used to ream BB30 bottom bracket shells to an ID of 41.94 mm.,Must be used with the HTR-1 Head Tube Reaming and Facing Set with a QK750 Centring Cone Adaptor,
Key Features:Screwdriver handled wrench to fit internal spoke nipples on deep section aero rims..Featuring a 6mm hex socket to perfectly into the tight surroundings of most rims..Extra long (3.25 inch / 8.5 cm) spoke wrench socket to prevent fouling on rim..Note: Wheel manufacturer specifications can change without notice..Made in the USA and covered by Park's legendary limited lifetime warranty.
The perfect workshop hammer!Fiberglass shaft with soft touch rubber gripA unique, two-sided head with both steel and replaceable plastic striking surfaces: ideal to tackle any job.
A great work stand accessory built to keep tools, lubes and spare parts right at your fingertipsThe 106 installs easily utilising the exclusive Park Tool receiver pod accessory system found on the PRS-15, PCS-10 and PCS-11, as well as PCS-1, PCS-4 and PCS-9 when used with part 106-AC Accessory Collar (available separately)Perfect for the races, ride support or as a convenient way to keep tools and supplies handyTray features a universal, large compartment, small compartment, lube holder, integrated tab system holds plastic bag for rubbish, universal tool / towel bar, and two receiver pods to accept accessoriesEasy to install or disassemble
A great place to keep small parts, cable end caps, grease, and whatever else you can think ofHelps keep track of all those bits that you always need in a hurryStainless steel construction with a clear acrylic hinged top and four removable binsDimensions: 12 x 5.5 x 3.5 inches (30.5 x 14 x 9 cm).
Key Features: Large tray ideal for holding small parts and tools,Deep sides so small items stay put,A variety of slots and holes hold any size or shape too,Fits all Park tool Repair Stands except PRS-2OS, PRS-3OS, PRS-4OS, and PRS-15.,The current PRS-5 (2002) uses a black vertical tube that mates well with the 104 tray.,Pre-2002 PRS-5 models use a blue oval tubing..,This blue tubing has marginal but adequate contact with the 104 tray.,The 104 tray must be removed for the PRS-5 to be folded and stored into the bag.,
Cut any threadless fork steerer quickly and accurately with this handy saw guideSlotted especially for thicker carbon cutting blades, which do not fit in standard cutting guidesYou can easily remove as little as 1 mm from the carbon steerer length for perfect headset installation and adjustmentHeat treated for long lifeThe composite body will not damage the fork's steerer, but has steel threads and inserts to withstand heavy shop useSuitable for all unthreaded steerer tubes up to 1-1/4 inches.
Studies by Park have show that most common bike servicing and setting up tasks can be carried out using a 4 and 5 mm hex wrenches along with a T25 Torx keyKey Features:Park now bring these three most commonly used tools together on one Y-wrench that is sure to become a shop mechanic's best friend.Less time switching tools means tasks can be carried out faster and more efficiently.Excellent ergonomics and effective leverage as the composite centre fits into the palm of the hand.Made from heat-treated Bondhus Protanium high torque steel for a long life.4 and 5 mm hex and T25 Torx wrenches.Made in the USA and covered by Park Tool's legendary limited lifetime warranty.