Park Tool ST3 Three Way Socket Wrench. The three most common bolt and nut sizes are combined with the classic Park Tool 3-way Y body. 8mm, 9mm, and 10mm forged chrome vanadium steel sockets.
The Park Tool HCW5 Double Sided Bottom Bracket Locking Hook Spanner is a popular and versatile Crank Wrench featuring Park Tool's proven Y head design. The HCW5 is double ended tool which saves space in the workshop and features a combined lockring tool, with a single hook on one end for the greatest versatility, and 3 pins on the other end for maximum engagement.
Featuring a square drive, plus 5 and 5.5 mm hexes that slip perfectly into the tight surroundings of most rims, the Park Tool nipple wrench works on wheels made by numerous manufacturers. These include the following (but are not limited to): FSA, Blackwell, Planet-X, HED, Rolf, Bontrager, Campagnolo and Mavic.
Although economically priced, the Park Tool pedal wrench pw5 with its 15mm head is like all Park Tool products, as it’s built to last. It's long enough to give you the leverage you need, but also compact enough to bring with you on your cycling holiday or to bike racing events.
Designed to get the maximum usage out of your chain, this fluid will remove all sorts of dirt and grease build-up from whatever terrain you have been riding. Ideal for use with the CM-5.2 Cyclone Chain Scrubber, and CM-25 Professional Chain Scrubber, or just as a general purpose degreaser, this formula is 100% biodegradable and plant-based, making it a smart and environmentally-friendly choice for getting your chain gleaming again. Safe to use on alloys, plastics and rubber parts and containing a rust inhibitor for added longevity, this Park Tool CB4 fluid will give your chain the best possible clean ahead of lubrication. Note: Use CB-4 full strength, do not dilute with water. Cover parts in solvent and scrub using a brush.
Note: Axles must be removed before mounting these adaptors.
Compatibility The 104 is intended for stands with a vertical upright tube. If the 104 tray is fitted to tubes of the tilted PCS-9 and PCS-10 stands, the tray will sit at a slight angle. The 104 tray uses a shim to fit tubes of 1-1/2" (38mm). Without the shim, it will fit tubes 1-5/8" (41mm). The 104 tray will NOT fit PRS-2 OS, PRS-3 OS, and PRS-4 OS, PCS-9, PCS-10, PCS-11, PRS-25 and PRS-15. The PRS-5 stands using a black vertical tube and mates well with the 104 tray. Pre-2002 PRS-5 models use a blue oval vertical tubing. This blue tubing has marginal but adequate contact with the 104 tray.
This excellent pair of composite-covered, steel core tyre levers let you confidently remove and replace your tyres with ease. Featuring a steel tip for strength and precision when engaging with the tyre bead, these grippy and durable tools are the perfect size for your kit bag or toolbox. Park Tool TL-6.2 Tyre Levers An essential set of tools for roadside repairs or workshop maintenance, the Park Tool Steel Core Tyre Levers TL-6.2 (Set of 2) provide all the lift you need to get back on the road. Manufacturer's Part Number: QKTL62
Park Tool Bio ChainBrite Cleaning Fluid CB-4Clean dirt and grime off your bike chain with the ChainBrite Cleaning Fluid from Park Tool. 100% biodegradable, this cleaning fluid is environmentally friendly and offers tough cleaning properties to help lubricate and clean your chain no matter what terrain you've met on the trail. Features:Volume: 450ml/16ozContains rust inhibitor100% BiodegradableCompatibility: CM-5.2 Cyclone Chain Scrubber, CM-25 Professional Chain ScrubberBuy Park Tool from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Steel Core Tyre Levers (TL-6.2)With steel inner cores to prevent flex and steel tips to better engage the tyre’s bead, the TL-6.2 bike tyre levers will help you to quickly remove even the stiffest tyres. Supplied as a pair, their updated super-smooth covering prevents scratches to expensive rims. Plus, at 12.7cm (5”) in length, they’re ideal for carrying with you on the road of trails or for daily use in your busy workshop.Features: Length: 12.7cm (5") Ergonomic shape Steel core for strength Pack of twoBuy Park Tool Workshop from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool 3-Way Internal Nipple Wrench (SW-15)The ideal addition to your workshop, this 3-Way Internal Nipple Wrench benefits from a unique 3-way feature that makes light work of fitting internal spoke nipples.Features:3.2mm square drive, plus 5mm and 5.5mm hex socketsSlips perfectly into the tight surroundings of most rimsWorks with wheels made by numerous manufacturers including, but not limited to FSA, Blackwell, Planet-X, HED, Rolf, Bontrager, Campagnolo, MavicNote: Wheel manufacturer’s specifications change without notice.Buy Park Tool Workshop Tools from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Work Tray 104Park Tool Plastic Work Tray 104This large tray is ideal for holding small parts and tools. It features deep sides so small items stay put. A variety of slots and holes hold any tool. Tools not included.The 104 is intent for stands with a vertical upright tube. If the 104 tray is fitted to tubes of the tilted PCS-9 and PCS-10 stands, the tray will sit at a slight angle. The 104 tray uses a shim to fit tubes of 1-1/2" (38mm). Without the shim it will fit tubes 1-5/8" (41mm). The 104 tray will NOT fit PRS-2 OS, PRS-3 OS, and PRS-4 OS, PCS-9, PCS-10, PCS-11, PRS-25 and PRS-15. The PRS-5 stands using a black vertical tube mates well with the 104 tray. Pre-2002 PRS-5 models use a blue oval vertical tubing. This blue tubing has marginal but adequate contact with the 104 tray. Buy Park Tool 104 Plastic Work Tray from Chain Reaction Cycles, the World's Largest Online Bike Store.
Park Tool Thru Axle Adaptors TS-2TAAllows truing stand to be used with 12mm, 15mm, 20mm and 25mm thru axle hubs. Axles must be removed to use adaptors. Adaptors mount easily to TS-2.2 or TS-2 Truing Stands.Buy Park Tool Thru Axle Adaptors from Chain Reaction Cycles, the World's Largest Online Bike Store.
A set of four replacement chain tool pins and one ball bearing to make your CT-4 Master Chain Tool as good as new
The benchmark crank puller of the cycle industry for over 25 yearsThe CCP-22 uses a long comfortable handle and extra fine thread that provides the leverage required to remove even the tightest cranksUnique floating-tip design hasbeen updated over the CCP-2 and ensures even smoother operation and longer lifeFits all cranks using 22 mm x 1 threads and square tapered bottom bracket spindles
The CCP-4 Crank Puller is specifically designed to remove crank arms from splined Shimano Octalink and ISIS Drive bottom bracket spindles that do not use a One Key Release systemIt uses a long comfortable handle and a fine thread for the leverage needed to remove tight crank armsUnique rotating tip design has been updated over the CCP-4 and ensures even smoother operation and longer lifeNote: The CCP-44 will not work on crank arms that fit standard square tapered bottom bracket spindles
The three most common bolt and nut sizes are combined with the classic Park Tool 3-way Y-body8 mm 9 mm and 10 mm forged CR-V steel socketsCovered by Park's legendary limited lifetime warranty
The TL-6 is a composite covered, steel core tyre ever set that offers an optimum trade off, being stiff and strong, yet gentle on your rims.Key Features:Ideal for removing stubborn tubeless tyres from costly lightweight wheels.Light enough to take along but also ideal as a workshop lever.Updated with a tougher, more slippery composite material.Protruding steel tip more easily and securely engages tire bead.Sold in pairs.Covered by Park Tool's legendary limited lifetime warranty.
Key Features: Large tray ideal for holding small parts and tools,Deep sides so small items stay put,A variety of slots and holes hold any size or shape too,Fits all Park tool Repair Stands except PRS-2OS, PRS-3OS, PRS-4OS, and PRS-15.,The current PRS-5 (2002) uses a black vertical tube that mates well with the 104 tray.,Pre-2002 PRS-5 models use a blue oval tubing..,This blue tubing has marginal but adequate contact with the 104 tray.,The 104 tray must be removed for the PRS-5 to be folded and stored into the bag.,
Studies by Park have show that most common bike servicing and setting up tasks can be carried out using a 4 and 5 mm hex wrenches along with a T25 Torx keyKey Features:Park now bring these three most commonly used tools together on one Y-wrench that is sure to become a shop mechanic's best friend.Less time switching tools means tasks can be carried out faster and more efficiently.Excellent ergonomics and effective leverage as the composite centre fits into the palm of the hand.Made from heat-treated Bondhus Protanium high torque steel for a long life.4 and 5 mm hex and T25 Torx wrenches.Made in the USA and covered by Park Tool's legendary limited lifetime warranty.