Ready to carry you to the top of the podium, this stunning duo features a deep hollow-forged aluminium crown for amazing toughness as you battle through the most aggressive of rides. Additionally, its 7050 butted aluminium legs provide another layer of durability and longevity as you blast across unpredictable terrain conditions against the clock. Adjustable MTB Forks Perfect for tackling every off-road challenge, these forks are equipped with some of the finest adjustable features to have you shredding with style. Their adjustable low and high speed compression damping, hydraulic bottom-out circuit and a fully adjustable air spring gives you the tools to dial in your ride exactly how you want it. As a result, you'll benefit from being able to easily customise these to match your specific riding style, discipline or terrain conditions. Technologies: Reverse Arch: Reverse Arch has equivalent stiffness with less weight. By placing the arch in the rear, behind the high point of the tyre, Manitou’s reverse arch design achieves equivalent stiffness with less weight. The arch is shorter in height, resulting in more efficient use of material. MC² (Multi-Control Compression): Manitou’s MC² (Multi-Control Compression) Damper comes in a fully sealed bladder cartridge offering independent Lo Speed and Hi Speed Compression adjustments. TPC Rebound: Two Stage Shim Stack to better isolate low speed and high speed rebound damping. Optimizes the rebound response for short travel chatter and deep travel hits without the complexity of adding in another adjuster. Bladder Cartridge: The sealed system separates air from the oil in the damper maintaining damping consistency in the most severe riding conditions. The new Mezzer bladder cartridge reduces the oil volume resulting in a lower overall weight. At the same time it assures a low brake away force from optimized shaft seal design. Blow Off Valve: Patent pending bladder blow off valve prevents over pressurisation and rupture of the bladder. HBO (Hydraulic Bottom Out): The internal HBO circuit ramps up damping during the final 30mm of travel protecting you from hard unexpected bottom-outs. Dorado Air: Our lowest weight World Cup proven high performance air spring technology offering ultimate sensitivity, featuring a self equalizing” negative air spring. Originally developed for the Dorado down hill fork, Dorado air has a single fill valve (on the bottom of the fork) that simultaneously fills the positive and negative air chambers, so the pressure is equalised. IRT (Infinite Rate Tune: Infinite Rate Tune (IRT) allows the rider to control mid stroke support and bottom out progressivity independent from initial spring rate to independently tune small bump sensitivity and big hit performance. Hollow-bore Crown: Chassis stiffness and weight optimized with Manitou’s patented Hollow-Bore Crown. Low Friction Wipers: Proprietary SKF low-friction rubber compound and sealing lip profile to further reduce the friction in the Mezzer. New Hexlock SL2: The new tooled Hexlock SL2 axle saves 26g over the previous version). Manufacturer's Part Numbers: 191-36235-A001 Black 27.5" 180mm - 44mm Option 191-35561-A001 Black 29" 180mm - 51mm Option 191-36235-A101 Black 27.5" 180mm - 37mm Option 191-35561-A101 Black 29" 180mm - 44mm Option
Ready for the trails, this Boost-spaced MTB fork is equipped with a robust straight-wall aluminium leg construction that makes it hard-wearing against impacts and obstacles. Its high-quality 32mm chassis is also kitted out with a 1.5" tapered steerer tube and a forged hollow crown for excellent strength as well as keeping its weight low. With a range of adjustments, this model's Expert Air spring, ABS+ compression damping and In-leg adjustable TPC rebound damping makes it easy to dial in your personal riding preferences. This makes it a great choice of upgrade for riders who want smooth and dependable shock absorption and control as they conquer their way around the mountain. Item Top Features Continued: Max Tyre Size: 61mm with fender, 69mm without Offset: 40mm (20"); 42mm (24") Ride Height: 390-430mm (20"); 455-500mm (24") Travel: Multiple options available to select E-Pac: Yes Manufacturer's Part Numbers: 191-36151-A101 Matt Black 20" 100mm 191-36151-A102 Matt Black 20" 120mm 191-36152-A101 Matt Black 24" 100mm 191-36152-A102 Matt Black 24" 120mm 191-36152-A103 Matt Black 24" 145mm
Manitou Machete J-UNIT Boost MTB Suspension ForkThis Boost-spaced mountain bike (MTB) fork is ready for the trails, with a robust straight-wall aluminium leg construction that makes it hard-wearing against impacts and obstacles. Its high-quality 32mm chassis is also kitted out with a 1.5" tapered steerer tube and a forged hollow crown for excellent strength as well as keeping its weight low. With a range of adjustments, this model's Expert Air spring, ABS+ compression damping and In-leg adjustable TPC rebound damping makes it easy to dial in your personal riding preferences. This makes it a great choice of upgrade for riders who want smooth and dependable shock absorption and control as they conquer their way around the mountain.Features: Leg Material: 6000-Series Straight Wall Aluminium Crown Material: Forged Aluminum, Deep Hollow Bore Matte Axle: 15x110mm Hexlock SL2 Use: MTB Steerer Diameter: 1.5" Tapered Leg Diameter: 32mm Spring: Expert Air Compression Damping: ABS+ Rebound Damping: In-leg adjustable TPC Adjustments: Air, Rebound, Compression Brake Compatibility: Post Mount 160mm (203mm Max)Max Tyre Size: 61mm with fender, 69mm withoutOffset: 40mm (20"); 42mm (24")Ride Height: 390-430mm (20"); 455-500mm (24")Travel: Multiple options available to selectE-Pac: Yes Weight: 1574g (20"); 1689g (24")Manufacturer's Part Numbers: 191-36151-A101 Matt Black 20" 100mm 191-36151-A102 Matt Black 20" 120mm 191-36152-A101 Matt Black 24" 100mm 191-36152-A102 Matt Black 24" 120mm 191-36152-A103 Matt Black 24" 145mmBuy Manitou Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Manitou Machete Mountain Bike Suspension ForkWhether you're exploring new trail routes on your own or shredding with your friends after work, this mountain bike (MTB) fork is engineered for dependable off-road performance. It features a durable 6000-series straight wall aluminium leg construction, which makes it ideal at handling the knocks and bumps that are associated with all-day epics in the mountains. Manitou has also equipped this model with a TS Air spring, Kwik Toggle compression damping as well as In-leg adjustable TPC rebound damping. This means that riders can set it up to perfectly match their riding style as well as the terrain conditions. Inspired by the brand's renowned Absolute+ technology, this version's Kwik Toggle compression damping also achieves on/off lockout simplicity in a lightweight, practical package.Features: Leg Material: 6000-Series Straight Wall Aluminium Crown Material: Forged Aluminum, Hollow Bore Matte Axle: 15x110mm Hexlock Use: MTB Steerer Diameter: 1.5" Tapered Leg Diameter: 32mm Spring: TS Air Compression Damping: Kwik Toggle Rebound Damping: In-leg adjustable TPC Adjustments: Air, Rebound, Lockout Brake Compatibility: Post Mount 160mm (203mm Max)Max Tyre Size: 68mm (27.5"); 77mm (27.5+) and 68mm (29")Offset: 37mm (27.5"); 44mm (27.5+/29")Ride Height: 471-511mm (27.5"); 485-525mm (27.5+/29")Travel: Multiple options available to selectE-Pac: No Weight: 1862g (27.5"); 1885g (27.5+/29")Manufacturer's Part Numbers: 191-36971-A002 Black 27.5" x 120mm travel 191-36971-A003 Black 27.5" x 100mm travel 191-36975-A002 Black 27.5+/29" x 120mm travel 191-36975-A003 Black 27.5+/29" x 100mm travelBuy Manitou Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Manitou Machete Mountain Bike Suspension ForkWhether you're exploring new trail routes on your own or shredding with your friends after work, this mountain bike (MTB) fork is engineered for dependable off-road performance. It features a durable 6000-series straight wall aluminium leg construction, which makes it ideal at handling the knocks and bumps that are associated with all-day epics in the mountains. Manitou has also equipped this model with a TS Air spring, Kwik Toggle compression damping as well as In-leg adjustable TPC rebound damping. This means that riders can set it up to perfectly match their riding style as well as the terrain conditions. Inspired by the brand's renowned Absolute+ technology, this version's Kwik Toggle compression damping also achieves on/off lockout simplicity in a lightweight, practical package.Features: Leg Material: 6000-Series Straight Wall Aluminium Crown Material: Forged Aluminum, Hollow Bore Matte Axle: 15x110mm Hexlock Use: MTB Steerer Diameter: 1.5" Tapered Leg Diameter: 32mm Spring: TS Air Compression Damping: Kwik Toggle Rebound Damping: In-leg adjustable TPC Adjustments: Air, Rebound, Lockout Brake Compatibility: Post Mount 160mm (203mm Max)Max Tyre Size: 68mm (27.5"); 77mm (27.5+) and 68mm (29")Offset: 37mm (27.5"); 44mm (27.5+/29")Ride Height: 471-511mm (27.5"); 485-525mm (27.5+/29")Travel: Multiple options available to selectE-Pac: No Weight: 1862g (27.5"); 1885g (27.5+/29")Manufacturer's Part Numbers: 191-36971-A002 Black 27.5" x 120mm travel 191-36971-A003 Black 27.5" x 100mm travel 191-36975-A002 Black 27.5+/29" x 120mm travel 191-36975-A003 Black 27.5+/29" x 100mm travelBuy Manitou Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Whether you're shredding with your friends after work or exploring new trail routes on your own, this high-quality fork is engineered for reliable performance. It features a durable 6000-series straight wall aluminium leg construction, which makes it ideal at handling the knocks and bumps that are associated with all-day epics in the mountains. Manitou has also equipped this model with a TS Air spring, Kwik Toggle compression damping as well as In-leg adjustable TPC rebound damping. This means that riders can set it up to perfectly match their riding style as well as the terrain conditions. Inspired by the brand's renowned Absolute+ technology, this version's Kwik Toggle compression damping also achieves on/off lockout simplicity in a lightweight, practical package. Item Top Features Continued: Max Tyre Size: 68mm (27.5") 77mm (27.5+), 68mm (29") Offset: 37mm(27.5"); 44mm (27.5+/29") Ride Height: 471-511mm (27.5"); 485-525mm (27.5+/29") Travel: Multiple options available to select E-Pac: No Manufacturer's Part Numbers: 191-36971-A002 Black 27.5" x 120mm travel 191-36971-A003 Black 27.5" x 100mm travel 191-36975-A002 Black 27.5+/29" x 120mm travel 191-36975-A003 Black 27.5+/29" x 100mm travel
Specifically developed for dirt jump and slopestyle riders, this suspension fork is kitted out with 7000-series straight wall aluminium legs for an excellent balance of strength and durability in demanding terrain conditions. Available in a range of travel options to choose from, its travel is also internally adjustable so you can fine-tune it to match your riding style. Another highlight is it's compatible with post mount disc brake rotors, so you'll enjoy its reliable front end suspension performance combined with powerful and consistent braking. ACT Air Spring and ABS+ Jump Stack Damping No stranger to the finer details, this dirt jump ready suspension fork is fully kitted out with a range of adjustments to deliver a more rider-tuned feel on your bike. Its lightweight ACT Air air spring smoothens out your ride, while its ABS+ Compression Damping with Jump Stack makes it all set for big hits and fast jumps. Coming complete with adjustable air, compression and TPC Rebound Damping, this model makes it easy to dial in your ideal settings to match your style as well as the terrain conditions. The Circus project started as a way to get our slope-style riders into competition; but it wound up becoming an industry leading dirt jump fork for riders all over the world. Circus has set the benchmark for the everyday riders' jump session requirements, and delivered podium results at pro-level competitions for almost a decade. Additional Item Top Features: Leg Diameter: 32mm Ride Height: 458-478mm (100mm Option); 498-508mm (130mm Option) Brake Post Mount: 160mm (203mm Max) Max Tyre Size: 63mm Steerer: Multiple options available to select Travel: Multiple options available to select Crown: 1-1/8" Option: Hollow Beam; Tapered Option: Forged Beam Technologies: - 80/100mm or 120/130mm Internally Adjustable Travel (choose travel option from drop-down menu). - Air Spring. - ABS+ Compression Damping with Jump Stack. - Adjustable TPC Rebound Damping. - Wheel Size: 26". Manufacturer's Part Numbers: 191-29495-A801 Black 26" x 100mm 1.1/8" 191-29495-A803 White 26" x 100mm 1.1/8" 191-29495-A808 Black 26" x 130mm Tapered 191-29495-A806 White 26" x 130mm Tapered 191-29495-A807 Black 26" x 100mm Tapered
This dirt jump suspension fork comes equipped with a hard-wearing 4130 steel leg construction, which makes it tough and dependable when nailing your favourite stunts. Ideal for slope-style riders, this fork is also kitted out with 32mm stanchions for excellent stiffness and stability when landing. Another highlight is its coil spring, which ensures smooth and consistent performance as you conquer your way around the track. Adjustable Dirt Jump Fork Featuring ABS+ compression damping with Jump Stack as well as in-leg adjustable TPC rebound damping, this dirt jump fork makes it easy to dial in your settings to fit in with your riding style or the terrain. Thanks to its adjustable air, rebound and compression, it provides a more rider-tuned feel as you charge from jump to jump. Coming complete with 100mm travel that's internally adjustable from 80-100mm, this model is ready for fast and fun rides at your local track. The Circus project started as a way to get Manitou's slope-style riders into competition; but it wound up becoming an industry-leading dirt jump fork for riders all over the world. Circus has set the benchmark for the everyday riders' jump session requirements and delivered podium results at pro-level competitions for almost a decade. Additional Item Top Features: Travel: 100mm (80-100mm internally adjustable) Crown: 1-1/8" Hollow Beam, Tapered Forged Beam Brake Post Mount: 160mm (203mm Max) Max Tyre Size: 63mm Wheel Size: 26" Offset: 41mm Ride Height: 458-478mm Manufacturer's Part Number: 191-29790-A801 Black 26" 100mm
Manitou Machete Junit Expert Air Boost ForksUpgrade your little shredder's offroad ride with the tough and terrain-smoothing Machete Junit Expert Air Boost Forks. Now younger riders can enjoy the same performance and control as the grownups do, helping them to ride the trails confidently.Manitou JUNIT Expert, a youth-sized suspension fork. Finally, young riders can enjoy a lightweight, high-quality chassis. JUNIT Expert features a 1.5” tapered alloy steerer tube and a forged hollow crown. Thirty-two millimetre, 6000 series black anodised stanchions are completed with Manitou’s signature Reverse Arch. Lightweight riders benefit from the easily adjustable Expert Air spring system, adjustable rebound, and Manitou's proven ABS+ damper.Features: Material: Aluminium Spring Type: Air Fork Travel: 80mm Adjustments: Air, rebound Damper: ABS+ Damper Steerer Tube: 1.1/8" - 1.5" tapered Brake Compatibility: Disc, Post Mount Axle to Crown: 390mm Hub Width: 15x110mm (thru axle included) Offset: 40mmBuy Manitou Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Manitou Circus Comp Suspension ForkSpecifically designed for the demands of dirt jumping, the Circus Comp suspension fork features a robust 4130 steel leg construction, which makes it tough and dependable when nailing your favourite stunts. Ideal for slope-style riders, it's also kitted out with 32mm stanchions for excellent stiffness and stability when landing. Another highlight is its coil spring, which ensures smooth and consistent performance as you conquer your way around the track.Adjustable Dirt Jump ForkFeaturing ABS+ compression damping with Jump Stack as well as in-leg adjustable TPC rebound damping, this dirt jump fork makes it easy to dial in your settings to fit in with your riding style or the terrain. Thanks to its adjustable rebound and compression, it provides a more rider-tuned feel as you charge from jump to jump. Coming complete with 100mm travel that's internally adjustable from 80-100mm, this model is ready for fast and fun rides at your local track.The Circus project started as a way to get Manitou's slope-style riders into competition; but it wound up becoming an industry-leading dirt jump fork for riders all over the world. Circus has set the benchmark for the everyday riders' jump session requirements and delivered podium results at pro-level competitions for almost a decade.Features: Leg Material: 4130 Steel Leg Diameter: 32mm Use: Dirt Jump Axle Size: 20mm thru-axle Steerer Diameter: 1 1/8" Straight Spring Type: Coil Compression Damping: ABS+ with Jump Stack Rebound Damping: In-leg adjustable TPC Adjustments: Rebound, Compression Travel: 100mm (80-100mm internally adjustable) Crown: 1-1/8" Hollow Beam, Tapered Forged Beam Brake Post Mount: 160mm (203mm Max) Max Tyre Size: 63mm Wheel Size: 26" Offset: 41mm Ride Height: 458-478mm Weight: 2534gManufacturer's Part Number: 191-29790-A801 Black 26" 100mmBuy Manitou Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Manitou Circus Expert Suspension ForkComing kitted out with 7000-series straight wall aluminium legs, this suspension fork offers an excellent balance of strength and durability for dirt jump and slopestyle riders. Available in a range of travel options to choose from, its travel is also internally adjustable so you can fine-tune it to match your riding style. Another highlight is it's compatible with post mount disc brake rotors, so you'll enjoy its reliable front end suspension performance combined with powerful and consistent braking.ACT Air Spring and ABS+ Jump Stack DampingEngineered for the demands of dirt jump riding, this suspension fork is fully kitted out with a range of adjustments to deliver a more rider-tuned feel on your bike. Its lightweight ACT Air air spring smoothens out your ride, while its ABS+ Compression Damping with Jump Stack makes it all set for big hits and fast jumps. Coming complete with adjustable air, compression and TPC Rebound Damping, this model makes it easy to dial in your ideal settings to match your style as well as the terrain conditions.The Circus project started as a way to get our slope-style riders into competition; but it wound up becoming an industry leading dirt jump fork for riders all over the world. Circus has set the benchmark for the everyday riders' jump session requirements, and delivered podium results at pro-level competitions for almost a decade.Features: Legs Material: 7000- Series Straight Wall Aluminium Leg Diameter: 32mm Use: Dirt Jump (DJ) Axle Size: 20mm Thru Axle Air Spring: ACT Air Compression Damping: ABS+ Jump Stack Rebound Damping: In-leg adjustable TPC Adjustments: Air, Rebound, Compression Wheel Size: 26" Offset: 41mm Ride Height: 458-478mm (100mm Option); 498-508mm (130mm Option) Brake Post Mount: 160mm (203mm Max) Max Tyre Size: 63mm Steerer: Multiple options available to select Travel: Multiple options available to select Crown: 1-1/8" Option: Hollow Beam; Tapered Option: Forged Beam Weight: 2128gTechnologies: 80/100mm or 120/130mm Internally Adjustable Travel (choose travel option from drop-down menu). Air Spring. ABS+ Compression Damping with Jump Stack. Adjustable TPC Rebound Damping. Wheel Size: 26".Manufacturer's Part Numbers: 191-29495-A801 Black 26" x 100mm 1.1/8" 191-29495-A803 White 26" x 100mm 1.1/8" 191-29495-A808 Black 26" x 130mm Tapered 191-29495-A806 White 26" x 130mm Tapered 191-29495-A807 Black 26" x 100mm TaperedBuy Manitou Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Manitou Markhor Boost ForksThe Manitou Markhor Boost Forks offer you amazing value for money and prove that high-quality and lightweight cross-country/trail forks are within the budget of most riders.With its 120mm of travel to smooth out the roughest trails, Manitou’s Kwik Toggle compression adjustment, air and rebound adjustment, you’ll be able to fine-tune the Markhor forks to suit how you ride and the terrain. You can also lock them up to eradicate pedal bob so you can attack a climb and crest it in no time!Lightweight ConstructionThe Markhor Boost forks are constructed from high-quality magnesium for the lowers and a 7050 straight wall alloy for the stanchions and crown. This means that with its low weight, the Markhors rival forks that are much more expensive. This construction and the “Boost” hub spacing ensures you’ve got stiff, precise handling and excellent durability no matter how hard you ride.Features: Material: Lowers: Magnesium; Stanchions: 7050 Straight Wall Aluminium; Crown: Shot Peen Aluminium Stanchion Diameter: 30mm Spring: TS air Damping: Kwik Toggle 2-position (open/lock) Bottom Out: Progressive Rubber Bumper Adjustments: Air pressure, rebound, lockout Axle Type: 15x110mm "Boost" TABrake Type: Disc, Post MountMaximum Rotor Size: 180mm Intended Use: XC, trail E-MTB Certified: YesBuy Manitou Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Manitou Circus Expert Suspension ForkComing kitted out with 7000-series straight wall aluminium legs, this suspension fork offers an excellent balance of strength and durability for dirt jump and slopestyle riders. Available in a range of travel options to choose from, its travel is also internally adjustable so you can fine-tune it to match your riding style. Another highlight is it's compatible with post mount disc brake rotors, so you'll enjoy its reliable front end suspension performance combined with powerful and consistent braking.ACT Air Spring and ABS+ Jump Stack DampingEngineered for the demands of dirt jump riding, this suspension fork is fully kitted out with a range of adjustments to deliver a more rider-tuned feel on your bike. Its lightweight ACT Air air spring smoothens out your ride, while its ABS+ Compression Damping with Jump Stack makes it all set for big hits and fast jumps. Coming complete with adjustable air, compression and TPC Rebound Damping, this model makes it easy to dial in your ideal settings to match your style as well as the terrain conditions.The Circus project started as a way to get our slope-style riders into competition; but it wound up becoming an industry leading dirt jump fork for riders all over the world. Circus has set the benchmark for the everyday riders' jump session requirements, and delivered podium results at pro-level competitions for almost a decade.Features: Legs Material: 7000- Series Straight Wall Aluminium Leg Diameter: 32mm Use: Dirt Jump (DJ) Axle Size: 20mm Thru Axle Air Spring: ACT Air Compression Damping: ABS+ Jump Stack Rebound Damping: In-leg adjustable TPC Adjustments: Air, Rebound, Compression Wheel Size: 26" Offset: 41mm Ride Height: 458-478mm (100mm Option); 498-508mm (130mm Option) Brake Post Mount: 160mm (203mm Max) Max Tyre Size: 63mm Steerer: Multiple options available to select Travel: Multiple options available to select Crown: 1-1/8" Option: Hollow Beam; Tapered Option: Forged Beam Weight: 2128gTechnologies: 80/100mm or 120/130mm Internally Adjustable Travel (choose travel option from drop-down menu). Air Spring. ABS+ Compression Damping with Jump Stack. Adjustable TPC Rebound Damping. Wheel Size: 26".Manufacturer's Part Numbers: 191-29495-A801 Black 26" x 100mm 1.1/8" 191-29495-A803 White 26" x 100mm 1.1/8" 191-29495-A808 Black 26" x 130mm Tapered 191-29495-A806 White 26" x 130mm Tapered 191-29495-A807 Black 26" x 100mm TaperedBuy Manitou Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Manitou Mezzer Complete MTB Fork Rebuild KitThis rebuild kit includes wiper, damper and air seals for breathing new life back into your Manitou Mezzer Pro 2020+ suspension fork. It also includes foam rings, metal-reinforced bottom-out bumpers, lower bolt sealing pads and backup rings. This kit is perfect for servicing the Pro version of your Manitou Mezzer forks with cartridge MC2 damper.Features: Kit includes: Lower leg wiper seals, foam rings and bottom-out bumpers (metal reinforced) Damper seals and replacement damper bladder Air spring seals and backup rings Lower bolt sealing pads Manufacturer's Part Number: 141-36713-K026Buy Manitou Components from Chain Reaction Cycles, the World's Largest Online Bike Store.
Manitou Mattoc MTB Suspension Fork Bushing KitGenuine Manitou replacement Bushing Kit to suit Mattoc forks. Buy Manitou Forks Spares from Chain Reaction Cycles, the World's Largest Online Bike Store.
Genuine Manitou suspension fork bushing kit to servicing and rebuilding Manitou Mattoc suspension forks.
Manitou Suspension Shock PumpThis high-quality pump is specifically designed for fast and reliable inflation for air forks and shocks up to 300psi.Fork Pump with DialThis superb model features a micro-pressure release control and a freely rotating valve coupler for simple ease of use and an excellent fit. Additionally, it's suitable for use with high-pressure air forks and shocks up to 300psi plus its swivelling hose means you can carry it in your jersey pocket.Features: Material: Aluminium Micro-pressure release control Freely rotating valve coupler For use with high-pressure air forks and shocks up to 300psi Swivelling hose so you can carry it in your jersey pocketBuy Manitou Bike Accessories from Chain Reaction Cycles, the World's Largest Online Bike Store.
This shock pump features a micro-release valve to fine-tune your suspension's air pressure, inflates up to 300 psi and is equipped with a 360° swivelling hose attachment. Plus, it's shaft and barrel are engineered from high-strength aluminium for a strong and lightweight pump that's easy to carry in your jersey pocket or backpack.
Manitou MILO Remote Assembly Kit Genuine Manitou Remote Assembly Kit Features: Designed to fit 2011 Manitou Forks with Milo capabilities Buy Manitou MILO Remote Assembly Kit 2012 from Chain Reaction Cycles, the World's Largest Online Bike Store.
Genuine replacement Manitou Boost spaced HexLock SL thru-axle.